Error while deriving currency from table T001P

Hi All,
Error while deriving currency from table T001P
I am getting this error while payroll run by using country GRP=99 in SU2 for Non-SAP supported country.
I assigned country grouping as 99 in V_T500P table while assigning comp code to personnel area.
The company code is assigned with BD as country key in configuration and currency as BDT.
Referring previous links for the same error I checked all concerned tables and maintained correctly.
What will be the probable reason of this error?

Hi,
I had the exact same problem a while back. The problem was that in V_T001 I had a different comp code which was either assigned to the same country that had a blank currency or assigned to the same currency but was missing the country. It was a different comp code than the one I was running payroll for so it took a long time to find the cause - I'll bet this is what's causing your error.
Rgds,
Kristopher

Similar Messages

Error while deriving the currencyfrom table T001P for International payrol

Dear Experts,
when i run the payroll in simulation mode. im geting an error msg as ' error while deriving the currency from table T001P'
I have checked all PA assignement with compnay code and country grouping (molga =99), which is correct and also i have checked all bellow tables.
V_T510F_B
T500W
T500C
Transaction code OE00
In Trasaction code OE00, system not allowing me to give the currency (LKR - Srilankan Rupees). its giving an error msg as ' maximum of 2entries are allowed for each country in table T500c'(Its not alowing me to save it)
I dont knw how to over come from this issue.
I have chnaged the company code and tried but still im getting the same error while running the payroll.
Any idea from Anyone....?
Regards
Dinesh.

HI Mohan,
Thz for your reply.i have checked all tables which u have mentioned. but currency (LKR- Srilankan Rupees) has been assigned.
In V_CURC.. there are no 2 entires. but when i try to assign the currency in T-Code OE00. its giving an error msg " A maximum 2 entries are allowed for each country in Table T500C"
I have tried to make one more intry in the same table and the same currency then its giving an error msg as " An entry already exist with the same key"
V_TCURR is currency exchnage rate... Is it necesory?
Thz,
Dinesh.

Error while deriving the currency from table T001P.

Hi Friends,
I am trying to run payroll for NZ using schema NZ00 but i am getting an error stating "Error while deriving the currency from table T001P. Error during initialization of Payroll"
I have checked V_T001P, V_T001 and have deleted the personnel area and subarea and again created it but still i am unable to solve this problem.
Could you please help me as to where this error can be corrected.
Thanks,
Manj

About the incidence, the problem might be related to the links between
personnel area, company code and currency set up (table T001P, T500P and
T001).
Please check the following points:
1- Have you assigned the Personnel area to the Company code under SPRO -
IMG -> Enterprise Structure -> Assignment -> Human Resource Management
-> Assignment of Personnel Area to Company Code.
2- SPRO -> Personnel Management -> Personnel Admin -> Basic Settings ->
Determine Currencies (Public Sector Currency Need to be maintained along
with the other node).
3- SPRO- Personnel Management -> Personnel Admin -> Payroll Data ->
Basic Pay -> Define Hourly Rates for several decimal places. (Please
maintain all the nodes).
4- Maintaining the table t500c through transaction code OE00.
Regards
Ramana

Error while creating datasource from table MBEWH

Hi all,
I am facing an error message while creating datasource from table MBEWH
"Invalid extract structure template MBEWH of DataSource "; This operation failed, because the template structure quantity fields or currency fields, for example, field LBKUM refer to a different table.
Can anyone help me that why system is not allowing me to generate generic datasource for table MBEWH to transfer my month wise inventory data.
thanks and regards.

Hi Zakir,
      This was comming for classification data... when ever you want to extract some classification related data then we can't create generic datasources directly.. for that you need to go with CTBW ( tcode ) and   create one datasource...
   so, you need to check that   related table also.. for that MBEWH table..
    ALL THE CLASSIFICATION RELATED DATASOURCES WE CAN'T CREATE DIRECTLY... JUST LIKE AUSP table also.. liek this..
regards
@jay

Time out error while fetching records from table BKPF

Hi,
I am fetching records from table BKPF using BUKRS & AWKEY in where clause. Query is as follows:
    SELECT BELNR XBLNR AWKEY
    FROM   BKPF
    INTO TABLE L_I_BKPF_TEMP
    PACKAGE SIZE 500
    WHERE BUKRS LIKE L_C_EG
    AND   AWKEY IN L_R_AWKEY .
      APPEND LINES OF L_I_BKPF_TEMP TO I_BKPF .
    ENDSELECT .
Program is giving time out error. There are 25628 records in range L_R_AWKEY , i m fetching 500 records at a time using PACKAGE SIZE. But the execution of prog stops on this query.
Please suggest something to overcome this problem.

Hi
Rui is right,
if you need to get the data by operation parameters u have to use the fields AWTYP and AWKEY.
In this selection u can omit the company code.
SELECT BELNR XBLNR AWKEY FROM BKPF
       INTO TABLE L_I_BKPF_TEMP
             PACKAGE SIZE 500
                  WHERE   AWTYP = <......> "<------------
                         AND AWKEY IN L_R_AWKEY .
       APPEND LINES OF L_I_BKPF_TEMP TO I_BKPF .
ENDSELECT .
Max

Program error while accessng data from table

Hi all,
In report , while accessing data for Sales order printing for Export, in sales order the NETWR is
1,070,000 (same as in sales order) but in Cond.table it is diplaying KAWRT and KBETR as
10,700.00. In program in select query for VBAK , it is taking the value 10,700.00. could any one tell me what has to be done ?
Thanks,

>
Khushi p wrote:
> In report , while accessing data for Sales order printing for Export, in sales order the NETWR is
> 1,070,000 (same as in sales order) but in Cond.table it is diplaying KAWRT and KBETR as
> 10,700.00. In program in select query for VBAK , it is taking the value 10,700.00.,
kwart need not be same that of netwr.netwr is in a way final taxable amount.Provide appropriate condition type while fetching from KONV .
Cheers

Error while deriving the currency from table

i am getting the below error while simulating the payroll for india.
Error while deriving the currency from table T001P & Error during Initialization of payroll.
i am SAP HCM Trainee.. practicing at home.

Pls check the currency in table T500C.
You can use TCode OE00 for table maintenance T500C.
Also check whether currency is there in table V_CURC and T510.
Hope this will help.
Regards
Ghouse

Error while selecting date from external table

Hello all,
I am getting the follwing error while selecting data from external table. Any idea why?
SQL> CREATE TABLE SE2_EXT (SE_REF_NO VARCHAR2(255),
2        SE_CUST_ID NUMBER(38),
3        SE_TRAN_AMT_LCY FLOAT(126),
4        SE_REVERSAL_MARKER VARCHAR2(255))
5 ORGANIZATION EXTERNAL (
6    TYPE ORACLE_LOADER
7    DEFAULT DIRECTORY ext_tables
8    ACCESS PARAMETERS (
9      RECORDS DELIMITED BY NEWLINE
10      FIELDS TERMINATED BY ','
11      MISSING FIELD VALUES ARE NULL
12      (
13        country_code      CHAR(5),
14        country_name      CHAR(50),
15        country_language CHAR(50)
16      )
17    )
18    LOCATION ('SE2.csv')
19 )
20 PARALLEL 5
21 REJECT LIMIT UNLIMITED;
Table created.
SQL> select * from se2_ext;
SQL> select count(*) from se2_ext;
select count(*) from se2_ext
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04043: table column not found in external source: SE_REF_NO
ORA-06512: at "SYS.ORACLE_LOADER", line 19

It would appear that you external table definition and the external data file data do not match up. Post a few input records so someone can duplicate the problem and determine the fix.
HTH -- Mark D Powell --

DB Connect Load - "Unknow error while uploading data from the DB Table"

Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
Abhijit

Hi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait

Error while creating data warehouse tables.

Hi,
I am getting an error while creating data warehouse tables.
I am using OBIA 7.9.5.
The contents of the generate_clt log are as below.
>>>>>>>>>>>>>>>>>>>>>>>>>>
Schema will be created from the following containers:
Oracle 11.5.10
Universal
Conflict(s) between containers:
Table Name : W_BOM_ITEM_FS
Column Name: INTEGRATION_ID.
The column properties that are different :[keyTypeCode]
Success!
<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
There are two rows in the DAC repository schema for the column and the table.
The w_etl_table_col.KEY_TYPE_CD value for DW application is UNKNOWN and for the ORA_11i application it is NULL.
Could this be the cause of the issue? If yes, why could the values be different and how to resolve this?
If not, then what could be the problem?
Any responses will be appreciated.
Thanks and regards,
Manoj.

Strange. The OBIA 7.9.5 Installation and Configuration Guide says the following:
4.3.4.3 Create ODBC Database Connections
Note: You must use the Oracle Merant ODBC driver to create the ODBC connections. The Oracle Merant ODBC driver is installed by the Oracle Business Intelligence Applications installer. Therefore, you will need to create the ODBC connections after you have run the Oracle Business Intelligence Applications installer and have installed the DAC Client.
Several other users are getting the same message creating DW tables.

Error while getting image from database in SUP using ios?

Hi All,
Im developing native iOS application using sup 2.1.3 . Im getting error While retrieving image from SUP database. Here i'm trying to get image from database and show in imageView.can any one help me how to fix this issue?
In database image datatype is 'LONG Binary' .
My table Schema:
CREATE TABLE dba.ImagesTable (
RowID INT NOT NULL,
ImageName VARCHAR(20) NOT NULL,
PhotoData LONG BINARY NOT NULL,
IN SYSTEM
ALTER TABLE dba.ImagesTable
ADD CONSTRAINT ASA137 PRIMARY KEY CLUSTERED (RowID)
ALTER TABLE dba.ImagesTable
ADD CONSTRAINT ASA138 UNIQUE NONCLUSTERED (RowID)
in Xcode:
            [SUP107SUP107DB synchronize];
            SUP107ImagesTable *imgTable =[[SUP107ImagesTable alloc]init];
            SUP107ImagesTableList *list =[SUP107ImagesTable findAll];
            SUP107ImagesTable * oneRecord =[list objectAtIndex:0];
            NSLog(@"rowId:%d---imageName:%@---photoData:%@---photoLenght:%d",oneRecord.rowID,oneRecord.imageName,oneRecord.photoData,oneRecord.photoDataLength);
            NSData *tempData =[[NSData alloc]init];
            SUPBigBinary *responseBinaryData = (SUPBigBinary *)oneRecord.photoData.value;
            @try {
                [responseBinaryData openForWrite:[oneRecord.photoData length]];
                [responseBinaryData write:tempData];
            @catch (NSException *exception) {
                NSLog(@"exception: %@",[exception description]);
            UIImageView *imgView =[[UIImageView alloc] initWithFrame:CGRectMake(50,50,100,100)];
            [self.window addSubview:imgView];
            UIImage * tempImage =[UIImage imageWithData:tempData];
            imgView.image = tempImage;
            [responseBinaryData close];
Error Log:
2014-04-02 18:42:15.150 SUP102[2873:70b] rowId:1---imageName:Apple---photoData:SUPBigBinary: column=c pending=1 allow_pending_state=1 table=sup107_1_0_imagestable mbo=0x0 key=(null) ---photoLenght:90656
Printing description of responseBinaryData:
<OS_dispatch_data: data[0xc891b40] = { leaf, size = 90656, buf = 0x1213a000 }>
2014-04-02 18:42:33.304 SUP102[2873:70b] -[OS_dispatch_data openForWrite:]: unrecognized selector sent to instance 0xc891b40
2014-04-02 18:42:33.305 SUP102[2873:70b] exception: -[OS_dispatch_data openForWrite:]: unrecognized selector sent to instance 0xc891b40
2014-04-02 18:42:33.305 SUP102[2873:70b] -[OS_dispatch_data close]: unrecognized selector sent to instance 0xc891b40
2014-04-02 18:42:33.306 SUP102[2873:70b] [ERROR] [AppDelegate.m:497] NSInvalidArgumentException: -[OS_dispatch_data close]: unrecognized selector sent to instance 0xc891b40

This thread talks about uploading image to SAP from a IOS device,Sending Image to SAP via iOS Native app (SUP 2.1.3)
Midhun VP

Error while converting schema from oracle to SQL server

Hello,
I am getting following error while converting schema from oracle to SQL server using SSMA.
I get Errors 1-3 while migrating procedures and error 4 while migrating a table.
1- O2SS0050: Conversion of identifier 'SYSDATE' is not supported.
2- O2SS0050: Conversion of identifier 'to_date(VARCHAR2, CHAR)' is not supported.
3- O2SS0050: Conversion of identifier 'regexp_replace(VARCHAR2, CHAR)' is not supported.
4- O2SS0486: <Primary key name> constraint is disabled in Oracle and cannot be converted because SQL Server does not support disabling of primary or unique constraint.
Please suggest.
Thanks.

The exact statement in oracle side which causing this error (O2SS0050:
Conversion of identifier 'to_date(VARCHAR2, CHAR)' is not supported.) is below:
dStartDate:= to_date(sStartDate,'MON-YYYY');
Statement causing error O2SS0050:
Conversion of identifier 'regexp_replace(VARCHAR2, CHAR)' is not supported is below.
nCount2:= length(regexp_replace(sDataRow,'[^,]'));
So there is no statement which is using to_date(VARCHAR2,
CHAR) and regexp_replace(VARCHAR2, CHAR) in as such. 'MON-YYYY' and '[^,]'
are CHAR values hence SSMA is unable to convert it from varchar2 to char.
Regarding SYSDATE issue, you mean to put below code in target(SQL) side in SSMA ?
dDate date := sysdate;
Thanks.

Time Stamp Error while extracting data from R/3

Hi,
We are getting time stamp error while extracting data from R/3.
To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
Please suggest me to solve.
Thanks
Subba Rao

Hi,
Time stamp error arises when the time stamp of the data source in source system and target system are different.
For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
Here are some useful links.
[R3 016 Time stamp error where is it in BI?;
[time stamp error in bi7;
[Timestamp error in BI7;
Thanks,
Venu

Error while creating subsite from site template

Hi,
I am getting below error while creating subsite from existing site template .
Sachin Bhosale

There must be a duplicate Email field created in any list/library. The cause can be identified by renaming the site template to sitename.cab > extact the cab file > open the manifest file search for email and see where it is associated. Refer
to the following blog post for more information
http://sharepointserved.blogspot.com/2012/11/a-duplicate-name-was-found.html
http://sharepoint.stackexchange.com/questions/11944/error-when-creating-a-site-from-custom-template-a-duplicate-field-name-name
Cheers,

Error while creating the DWH tables using DAC

Hi,
I am getting error while creating the DWH tables using DAC. I have created a ODBC DSN using merant driver with DAC repository DB credentials and the test connection is successful. And while creating the tables i gave the olap dw credentials and the DSN name which i created earlier. But it throws the error as below:
Please find the below mentioned error message
=====================================
STD OUTPUT
=====================================
CREATING SIEBEL DATABASE OBJECTS
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ******* /c DB_DAC /G "SSE_ROLE" /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b "" /K "" /X "" /W N
Error while importing Siebel database schema.
=====================================
ERROR OUTPUT
=====================================
Siebel Enterprise Applications ODBC DDL Import Utility, Version 7.7 [18030] ENU
Copyright (c) 2001 Siebel Systems, Inc. All rights reserved.
This software is the property of Siebel Systems, Inc., 2207 Bridgepointe Parkway,
San Mateo, CA 94404.
User agrees that any use of this software is governed by: (1) the applicable
user limitations and other terms and conditions of the license agreement which
has been entered into with Siebel Systems or its authorized distributors; and
(2) the proprietary and restricted rights notices included in this software.
WARNING: THIS COMPUTER PROGRAM IS PROTECTED BY U.S. AND INTERNATIONAL LAW.
UNAUTHORIZED REPRODUCTION, DISTRIBUTION OR USE OF THIS PROGRAM, OR ANY PORTION
OF IT, MAY RESULT IN SEVERE CIVIL AND CRIMINAL PENALTIES, AND WILL BE
PROSECUTED TO THE MAXIMUM EXTENT POSSIBLE UNDER THE LAW.
If you have received this software in error, please notify Siebel Systems
immediately at (650) 295-5000.
F:\DAC\bifoundation\dac\UTILITIES\BIN\DDLIMP /I N /s N /u infdomain /p ***** /c DB_DAC /G SSE_ROLE /f F:\DAC\bifoundation\dac/conf/sqlgen/ctl-file/oracle_bi_dw.ctl /b /K /X /W N
Connecting to the database...
28000: [DataDirect][ODBC Oracle driver][Oracle]ORA-01017: invalid username/password; logon denied
Unable to connect to the database...
any help is appreciated.
Thanks,
RM

The fact that you are getting an "ORA-01017: invalid username/password; logon denied" message indicates that you are at least talking to the database.
The log shows that username "infdomain" is being used. Can you double check the username and password you have in DAC in a SQL*Plus/SQL Developer session?
Please mark if useful/helpful,
Andy.

Error while deriving currency from table T001P

Similar Messages

Maybe you are looking for