Error while distributing a distribution model in BD64

Hi,
I am trying to send an IDOC from one client to another client of the same SAP system. To achieve that, i have created the necessary logical systems and made the necessary partner, port configuration as well as RFC Destination. In BD64, I have created a new model and added a BAPI 'SAVEREPLICA' and Object 'BUS1093' using Add BAPI button. But when I am trying to distribute the model it's giving the following error - 'Model view ABCDX has not been updated. Rreason: Distribution model is currently being processed'.
Kindly help,
Thanks in advance,
Deep.

Using of BAPI is not accepted between two clients of the same system, you'll have to use different SAP systems

Similar Messages

Error while distributing the ALE distribution model through BD64

Hi,
I am getting the error while distributing the distribution model through BD64. The error is as follows:
"Model view DVGDVH has not been updated
Reason: the following ALE connection already exists in model view TESTMOD".
What does this means?
Regards,
Soumya.

Dear Sapera,
I faced the same problem last night.
We just manually deleted the distribution model from receiving system.
Log on to receiving system => BD64 => change/dispay => edit => delete => Save.
Once deleted log in to sender system and then select model and distribute again.
by performing this we were able to resolve this issue.
Warm regards,

Error while distributing customer model

hi,
i am getting the following error when i am trying to send data between two R/3 systems using distribution model
i am unable to distribute the model to the other system
Error:
"Target system is an external System. It does not support this function."
even after successfully generating partner profiles i am getting this error.
could someone help me out with this problem

Hi Siddharth
Can you please update about all the ALE setting that you have done before trying to distribute the model to the other system.
And whether you have put correctly - the sender and receiver while creating the distribution model. And, most importantly the partner profiles?
Please update..
Regards
Ashish

Error while distributing the model

Hi
I am not able to successfully distribute my model thru BD64. I am getting the error msg as ' the model has not been updated'.The configuration done till now is according to the basic procedure.
Can anyone please suggest a way to overcome this error.
thanks

Hi,
You can create a distribution model and then add message type to it; however, there are some preconditions which you need to ensure before you create the model.
Preconditions:
1) Ensure that you have the message type in both the systems; if custom msg type is used, you need also to create the one in the partner system.
2) Do all configuration related to msg type, idoc type, etc in your partner system as well
3) Create RFC destination in the current system for your partner system... and test the connection if it is working fine
After you create the model and added msg type to it, you also need to do the following:
1) Go to Edit --> Model View --> Distribute to distribute/ create it in your partner system
2) To validate, you can check in your partner system if the model is automatically created there
3) Then create Partner profile in both the systems by going to Environment --> Generate Partner Profiles
Hope it helps and solves your problem.
Regards, Tapas
<Pls award pts if useful or answered>

JCo destination error while executing the webservice model

Hi,
I have explained what I have done so far and whats my issue right now.
My requirement is calling a PI interface (exposed as webservice) from webdynpro for java and setting some parameter value to the PI interface based on which our functional flow will continue.
Done so Far :
1. Created a webdynpro for java application using NWDI.
2. received the WSDL file of the PI interface and imported as "Adaptive webservice model" into webdynpro.
3. used the model and set the parameters to PI interface and executed the model.
4. I have created JCO destinations in the source system (where the application runs) to communicate to the PI system. A special user has been created and assigned in the connection for communicating.
5. Also I have created the "Dynamic Webseviceproxies" in visual admin with the same name as the JCO destinations. It had a property "URL" for which I have tested with providing both the PI server URL (Http://<Hostname>:<Port no>) and also the complete webservice URL (Which calls the WSDL file directly)
when I run the application, I get the following error.
1. Exception on creation of service metadata for WS metadata destination 'WD_RFC_METADATA_DEST' and WS interface '{<Interface Name>'. One possible reason is that the metadata destination 'WD_RFC_METADATA_DEST' has not been properly configured; check configuration.
after some exception the next error follows
2. Invalid Response Code 403 while accessing URL: <The URL which I have provided in the webservice proxy in Visual admin tool> Response Message: Forbidden.
after some lines of exception from PI server the next error follows.
3. Error: You are not authorized to view the requested resource
My Question :
1. Do I miss anything in Configuration?
2. Is my way of approach wrong?
3. Any additional authorization needed?
Kindly provide some ideas and inputs.
Regards,
Mahendran B.

Dear Mahendran
JCO destination will not used for the Web Service Model. While creating the webservice model, you need to use the logical destination which you have created in the Visual Admin.
Please refer to the Secured WebServices II and verify currently used webservice logical destination How To Reimport Web Service Models in Web Dynpro for Java
You can also refer to
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/900bbf94-a7a8-2910-e298-a651b4706c1e?QuickLink=index&overridelayout=true
Hope it will helps
Best Regards
Arun Jaiswal

Error while creating a webservice model

Hi All,
I am doing the EMail WebService exercise. While creating the webservice model I select the UDDI or URL Radio button and in the wsdl field I paste the following url : http://www.abysal.com/soap/AbysalEmail.wsdl .
When I click next in the proxy definition screen, I get the message Invalid WSDL or WSDL not found and the Finish button is not highlighted.
I checked the webservice mentioned above it is fine and working. I cannot understand why this is not accepted in NWDS
Pls Reply ASAP

Hi,
I am using the Proxy to connect to the internet so i used the proxy connection to send the mail.
For me the web service is just working fine.
I do not know where the problem is occuring for you.
There is already ready-made tutorial for this application...
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sapportals.km.docs/business_packages/a1-8-4/6tutwd_emailwebservice.zip">Ready Made Application</a>
you download it and give the proxy parameters and try to execute the application. Now this should work fine for you.
Hope it helps.
Regards,
Maheswaran.B

Incorrect distribution -Error while distributing GOA to R3 Backend system

Hi,
We have installed SRM server 5.5 and implementing contract Management
scenario with backend system R/3 4.6B.
In this scenario we are creating a Global Outline Agreement in SRM
system and distributing it to the back-end ERP system.
In SRM5.0 GOA (Trans.type GCTR) that are distributed at Header level
are failing to distribute to R/3 system v4.6b
We are getting this error message in SRM transaction SLG1: -
The error ocurred by processing event RELEASED_NEWLY with GUID
DCA7101B320134F1949F000347DE470F and object_id= 5600000054 " RECEPIENT
NOT FOUND"
The purchasing org , the plant has been mapped .Also vendor & material is maintained for the company & Plant .
The condition types are mapped in SRM
Pls suggest.
Regards,
Avinash

Hi Avinash,
In reference to your query about GOA, the distribution error might be beacause of the issues in BADI implementation.
By using the BADI you can define which document to be created in the backend.
BBP_CTR_BE_CREATE BADI can be used in SRM and BBP_CTR BADI can be used in back end R/3 for this purpose.
Check for the transaction types (GCTR) and the number ranges for the transaction types.
The GOA will either create a contract or a Scheduling agreement in R/3 back end after distribution.
Also refer the below SDN thread in this regard :
Re: Scheduling Agreement from GOA
Any further clarifications are welcome.
Award points for suitable answers.
Rgds,
Teja

Error while creating filter using BD59 and BD64

Hi Friends-
While creating filters for HRMD_A message type using BD59 i have added one field stat2 for segment
E1P0000 and its coming also in BD64 while creating filter group but when i double click on it to give value to it it gives me error ' Inconsistency in ' .
what could be the reason pls let me know ?
Regards
Meeta

Hi,
Try to distribute the model view in BD64 ( Edit->ModelView->Distribute). you can check for technical inconsistencies for message type in Transaction BDM5
Regards,
Vinod

Error while distributing document

I have one querry in SAP-DMS Document Distribution
--While i am distributing the document to single recipient it is working fine without any error and document is received by end recipient
--While i am trying to distribute same document to multiple document it doesn't delivers the document and in distribution log i can see the status as "ER" and when i am restarting distribution from log screen manually the documents are distributed....
If any one has idea about it please reply...
I want to distribute document to multiple recipient automatically.....without restarting the distribution manually from distribution log screen
Regards,
Tushar Dave

Thanks christoph,
i applied the note 1008281, & it worked
thanks & regards
Tushar.

Error while creating a RFC model for WD for Java

Hi,
While trying out the example(TutWD_FlightList_Init.zip) for model programming in the NDS,I got the following error when I try to create a model:
Plugin Name     Web Dynpro Model Editor Services
Plugin Id     com.sap.ide.webdynpro.service.modeleditor
Class     com.sap.ide.webdynpro.modeleditor.wizards.model.creation.ModelDialog
Method          nextPressed
Message          Internal error - see detail information in exception trace
Exception     org.eclipse.swt.SWTException: Failed to execute runnable (java.lang.NoClassDefFoundError)
Can anybody help?Is there any place in NDS to see the detailed error message?
thanx in advance,
Bhupesh

I modified the xml file as described in the forum.But the error persists.
One interesting thing is:
When I create model after restarting the NDS,I get the following error:
org.eclipse.swt.SWTException: Failed to execute runnable <i>(java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library librfc. Found version "620.0.1237" but required at least version "620.0.1374".)</i>
I get the NoClassDef found error next time onwards,
Where do I get the 620.0.1374 version of librfc?
thanx.
Bhupesh

Error while creating Adaptive WS Model

Hi All,
I am trying to create a adaptive ws model out of a wsdl file. The file stored locally on my machine. While creating,it gives an error as
Error in loading the WSDL file. Check error log
When I checked the error log, these were the last entries,...
t com.sap.ide.eclipse.startup.Main.main(Main.java:607)
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model. See nested exception for details.
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:149)
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.<init>(DGenericServiceImpl.java:49)
at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:71)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:411)
... 53 more
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.ProxyGeneratorException: Proxy Generator Error. Proxy generation problem. See nested exception.
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.generateProxy(ProxyGenerator.java:249)
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:146)
... 56 more
Caused by: java.lang.Exception: WSDL does not contain enough information to load WS Client.
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ClassGenerator.generateAll(ClassGenerator.java:1159)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.generateProxy(ProxyGenerator.java:244)
... 57 more
What could be the problem? Any pointer is appreciated. Thanks
Regards
Sandip Agarwal

Sandip sir,
If u can access the webservice in webdynpro in this server,u can check the webservice in wsnavigator also.If its working on some other server,may be its not deployed properly on the server u r using.
If the service is deployed on the server,it will be available on wsnavigator also.
note: If u can't see the service in wsnavigator,how do u check whether the service is working properly?If there is any other method to check the service,do let me know also,so i can try.
regards
Sumit

Error while doing cost distribution

Hi all:
while I am trying to do cost distribution , a message comes that
Cycle DOFF is not valid on 11/01/2008
Message no. GA509
Diagnosis
Cycle DOFF is valid as of the starting date 04/14/2009
System response
This cycle cannot be processed.
Could you please tell me how solve the issue ?
Thank you very much

Hi,
The error is because you have created Cycle DOFF with the starting date 04/14/2009 & you are trying to run the distribution cycle for November 2008.
For which period do you want to run the cycle?
1) If it is for April 2009, then enter the correct period & year when executing the cycle.
2) If it is for November 2008, then you will have to increase the validity of the cycle. I dont think you can change the start date of a cycle. You could however create a new cycle with validity period Nov 2008 to Dec 9999 by copying the cycle DOFF & only changing the start & end date. Then execute this new cycle.
Regards,
Sangeeta

Error while using Adaptive RFC model

I am using adaptive RFC model to consume a function module from BI system. The function module expects a Boolean input. While executing the function module we need to give u2018Xu2019 for that input. When I consumed the function module in the webynpro java project , used it and give the input as u2018trueu2019 on runnig the application it gives the following error: u201Ccom.sap.conn.jco.ConversionException: (122) JCO_ERROR_CONVERSION: Cannot convert a value from type java.lang.Object to CHAR at field I_READ_ATTRu201D
There is corresponding dictionary type created called u2018BOOLE_Du2019 but I could not access the dictionary type in the controller java file.
Is there a way to rectify the same or any workaround condition?
With regards,
Sougato.

Hi saurabh,
I need to give the value from webdynpro. Hers is the sample code.
rssem_Cha_Values_Get_Input.setI_Read_Attr();
// It expects a boolean value but if i pass a value to the method the obove error is show.
Where as there is a simple type "Boole_d" generated when i consumed the RFC in the webdynpro.
but i couldn't access this simple type in the code.
With regards,
Sougato.

Extract error while distributing Desktop Application

Hello,
we have a problem with extracting a Desktop Application on a special
location. The same TED Dist is working on a few other locations (different
channels). Also other Distribution work on the specific location. we've
already deleted all temporary files on the ZFS volume on the subscriber and
distributer, rebuilded the distribution. We've also deleted the specific
channel and recreated it, but this didn't solve the problem anyway.
the error is as following:
Info 2006/04/12 08:42:02 AM Creating new application failed, Subscriber
Tree Name= OrgTree, Subscriber DN = Subscriber_WOHNW01.ZFS.WIN01.PD, error
message: Unknown meaning for error number -1; Please call a Novell support
provider Also please make sure you set up a working context in the
Subscriber's properties. was sent successfully to winnw05.intra.pdag.ch
Error 2006/04/12 08:42:02 AM Extract
ZFS:\SUB\org~desk_pda.deskapp.zfs.win01.pd\1142589 211390 stopped with
error: Unknown meaning for error number -1; Please call a Novell support
provider Also please make sure you set up a working context in the
Subscriber's properties
we are running ZENworks 6.5 SP2 Server Management on all servers, but the
problem was already there without sp2.
thanks in advance for any help
jimmy ott

Are you sure the working context is set?
Does the working context show up if you look at the ZSM config through
remote webconsole?
Rom
<[email protected]> wrote in message
news:MB1%f.4628$[email protected]..
> Hello,
>
> we have a problem with extracting a Desktop Application on a special
> location. The same TED Dist is working on a few other locations (different
> channels). Also other Distribution work on the specific location. we've
> already deleted all temporary files on the ZFS volume on the subscriber
> and
> distributer, rebuilded the distribution. We've also deleted the specific
> channel and recreated it, but this didn't solve the problem anyway.
>
> the error is as following:
> Info 2006/04/12 08:42:02 AM Creating new application failed, Subscriber
> Tree Name= OrgTree, Subscriber DN = Subscriber_WOHNW01.ZFS.WIN01.PD, error
> message: Unknown meaning for error number -1; Please call a Novell support
> provider Also please make sure you set up a working context in the
> Subscriber's properties. was sent successfully to winnw05.intra.pdag.ch
> Error 2006/04/12 08:42:02 AM Extract
> ZFS:\SUB\org~desk_pda.deskapp.zfs.win01.pd\1142589 211390 stopped with
> error: Unknown meaning for error number -1; Please call a Novell support
> provider Also please make sure you set up a working context in the
> Subscriber's properties
>
> we are running ZENworks 6.5 SP2 Server Management on all servers, but the
> problem was already there without sp2.
>
> thanks in advance for any help
> jimmy ott

Getting 'File not found' error while using server object model code

Hi,
I am using server object model code to pull list data in a console application. My machine has standalone installation of SP 2010. I am getting error 'File Not Found', however the same operation is working fine with client object model code.
Code I am using:
string strURL=http://servername/sites/sitename;
SPSite siteObj=new SPSite (strURL); //getting error here.
I have already checked the below,
1. Framework being used is 3.5.
2. I have proper access to site.
3. Running visual studio as admin.
Any help is much appreciated.
thanks
Tarique
thanks and regards Tarique Aslam

Hello Tarique ,
Couple of pints need to check:
1. User running the console application needs to have at least read permission to the SharePoint databases
2. Set application by changing the "Platform target:" option on the "Build" to "Any CPU"
Also refer this similar thread:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/2a419663-c6bc-4f6f-841b-75aeb9dd053d/spsite-file-not-found
Hope it could help
Hemendra:Yesterday is just a memory,Tomorrow we may never see
Please remember to mark the replies as answers if they help and unmark them if they provide no help

Error while distributing a distribution model in BD64

Similar Messages

Maybe you are looking for