Error while distributing expenditure batches

HI,
Created pre approved expenditure batch with timecard as class. Submitted the batch and released it. But while ditributing the cost ( PRC: Distribute labor costs), no output is generated. according to Log file, it is unable to fetach assignments for organization or OU.
Please let me know if i missed any steps. Assignment is done at Oragnization level in HRMS.
Arvind
[email protected]

Hi
Verify the employees are assigned properlly to an HR organization.
Verify the HR organization is also classified as Projects Expenditure/Event Organization
Verify the organization is defined with in an hierarchy, and that hierarcy version is the one you set up in Projects Implementation Options.
Check that the employees are entred in the Rate Schedule with valid rates.
Dina

Similar Messages

  • Error while distributing the ALE distribution model through BD64

    Hi,
    I am getting the error while distributing the distribution model through BD64. The error is as follows:
    "Model view DVGDVH has not been updated
    Reason: the following ALE connection already exists in model view TESTMOD".
    What does this means?
    Regards,
    Soumya.

    Dear Sapera,
    I faced the same problem last night.
    We just manually deleted the distribution model from receiving system.
    Log on to receiving system => BD64 => change/dispay => edit => delete => Save.
    Once deleted log in to sender system and then select model and distribute again.
    by performing this we were able to resolve this issue.
    Warm regards,

  • Error While Changing the Batch Characterstics

    Hi Guys,
    We are getting error while Passing Material,Plan and Batch(Concatenated Value) to BAPI_OBJCL_CHANGE in the LV_OBJECT(BAPI1003_KEY-OBJECT) field we are getting the following error "Object LV_OBJECT Value does not exist" in the Return Table of the Bapi. Do we need to do any configurations for this?
    Thanks
    Nav

    Issue Got Resolved.
    Thanks,
    Nav

  • Error while selecting Multiple batchs in Delivery

    Dear All,
    I am facing a problem while selecting multiple batches for single item while creating delivery. It gives me Error "Item Category not defined for Batches".
    But if i select one batch per delivery it works fine.
    Pls guide me.
    Thanks in advance.
    Shailendra Panhale

    Shailendra,
    1. Even though you do Batch Management Configuration in Logistic General. Item Category that is used should be activated for Batch Split.
    a. In That case IMG --> Logistics Execution --> Shipping --> Deliveries --> Define Item Categories for delivery, Choose the item category you have defined for the process and activate the following indicators
    Relevant for picking,
    St location Required
    Determine storage location and
    Auto Batch Determination Indicator
    b. --> Logistics Execution --> Shipping --> Deliveries --> Define Item Category determination in deliveries
    Maintain it accordingly Delivery type(ZLF) + Item category(NORM) + Usage(CHSP - Batch split)  + Item Category + item Category (ZTAN)
    Maintain Copy controls for Delivery to billing accordingly throuh the Tcode  VTFL
    Regards
    Sathya

  • Error while running scheduled batch book

    I'm receiving this error while trying to produce a large book through a scheduled batch within Workspace. The version is EPM 11.1.1.3
    Status for various save options for "Cable and Communications/... BUDGET SUBMISSION .../.. SUBMISSION PACKAGES ../00 Budr - Detailed Budget Book"
    Saved successfully in repository as //00 Budr - Detailed Budget Book
    Error while saving as PDF
    ; nested exception is:
    java.rmi.ServerException: RemoteException occurred in server thread; nested exception is:
    com.hyperion.reporting.util.HyperionReportException: Could not find information about PDF generation for instance number:
    Batch "Cable and Communications/... BUDGET SUBMISSION .../.. SUBMISSION PACKAGES ../Budget Detailed Book" finished at Friday, December 18, 2009 12:18:33 AM EST
    I am able to produce smaller books and view them fine. This one book is approx. 300 pages and the successful book is approx. 100 pages
    thx

    no luck.
    im getting following errors:
    updatamanagergroup.java:3: package Thor.API.Operations does not exist
    import Thor.API.Operations.*;
    ^
    updatamanagergroup.java:4: package Thor.API does not exist
    import Thor.API.tcResultSet;
    ^
    updatamanagergroup.java:5: package Thor.API does not exist
    import Thor.API.tcUtilityFactory;
    ^
    updatamanagergroup.java:6: package com.thortech.xl.crypto does not exist
    import com.thortech.xl.crypto.tcCryptoUtil;
    ^
    updatamanagergroup.java:7: package com.thortech.xl.scheduler.tasks does not exist
    import com.thortech.xl.scheduler.tasks.SchedulerBaseTask;
    ^
    updatamanagergroup.java:8: package com.thortech.xl.util.config does not exist
    import com.thortech.xl.util.config.ConfigurationClient;
    ^
    updatamanagergroup.java:13: cannot find symbol
    symbol: class SchedulerBaseTask
    public class updatamanagergroup extends SchedulerBaseTask
    ^
    and so on....
    23 errors
    Edited by: user11136275 on Dec 24, 2009 12:22 AM

  • Getting error while compiling frmcmp_batch batch file

    HI
    I am getting error while running frmcmp_batch commant
    to create .fmx file
    following is command that i am using
    $ frmcmp_batch module=$AU_TOP/forms/US/DEMxxEOR.fmb userid=APPS/apps output_file=$PO/forms/US/DEMxxEOR.fmx module_type=form batch=no compile_all=specialfollowing is error that i am getting
    Forms 10.1 (Form Compiler) Version 10.1.2.3.0 (Production)
    Forms 10.1 (Form Compiler): Release - Production
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
    With the Partitioning, OLAP, Data Mining and Real Application >>Testing options
    PL/SQL Version 10.1.0.5.0 (Production)
    Oracle Procedure Builder V10.1.2.3.0 - Production
    Oracle Virtual Graphics System Version 10.1.2.0.0 (Production)
    Oracle Multimedia Version 10.1.2.0.2 (Production)
    Oracle Tools Integration Version 10.1.2.0.2 (Production)
    Oracle Tools Common Area Version 10.1.2.0.2
    Oracle CORE 10.1.0.5.0 Production
    FRM-18108: Failed to load the following objects.
    Source Module:APPSTAND>> Source Object: STANDARD_PC_AND_VA
    Source Module:APPSTAND>>Source Object: STANDARD_TOOLBAR
    Source Module:APPSTAND>>Source Object: STANDARD_CALENDAR
    Compiling package specification APP_CUSTOM...>> No compilation errors.
    Compiling package specification APP_CUSTOM...>> No compilation errors.
    Compiling package body APP_CUSTOM...
    Compilation error on package body APP_CUSTOM:
    PL/SQL ERROR 302 at line 22, column 19
    component 'DISABLED' must be declared
    PL/SQL ERROR 0 at line 22, column 5
    Statement ignored
    PL/SQL ERROR 201 at line 40, column 5
    identifier 'APP_WINDOW.CLOSE_FIRST_WINDOW' must be declared
    PL/SQL ERROR 0 at line 40, column 5
    Statement ignored
    Compilation errors have occurred.
    Form not created

    Hi;
    I am getting error while running frmcmp_batch commant
    to create .fmx file
    following is command that i am using
    $ frmcmp_batch module=$AU_TOP/forms/US/DEMxxEOR.fmb userid=APPS/apps output_file=$PO/forms/US/DEMxxEOR.fmx module_type=form batch=no compile_all=special
    Please try wiht below syntax
    frmcmp_batch userid=apps/apps module=/u01/VIS/apps/apps_st/appl/au/12.0.0/forms/US/INVTTMTX.fmb output_file=/u01/VIS/apps/apps_st/appl/au/12.0.0/forms/US/INVTTMTX.fmx module_type=form batch=no compile_all=yes
    Regard
    Helios

  • Error while Running BRS Batch input session

    Dear Gurus,
    When i am running Batch input session after BRS statement posted, system giving Error message:
    <b>No batch input data for screen SAPDF05X 3100</b>
    Entered, saved and posted the statement. after that while processing session getting error like this........How to overcome.
    Can we post statement directly without creating session.
    Regards,
    Venkat

    Hi,
    The ABAP Counterpart has to build an exception handling for this particular message.
    Normally these messages occur either after an upgrade or after a change in the account(different filed status)
    Provide points if usefull.
    Thanks,
    Praveen

  • Java.io.filepermission error while executing a batch file from java prog

    Hi,
    i want run a java program which executes a batch file, both are in a jar file. while am trying this using webstart it shows error:access denied java.io.filepermission <<ALL FILES>>execute. why this happens how to rectify this.
    By
    Vinod

    Clearly, it would be a security vulnerability to be able to do such a thing from the web w/o user granting trust to the application.
    Java Web Start applications run in the Java SE secure sandbox unless they have been granted all-permissions by the user:
    1.) sign all jar files.
    2.) add <security><all-permissions/></security> to the jnlp file.
    The user would then be prompted to grant trust to the applications.
    /Andy

  • Error while distributing customer  model

    hi,
    i am getting the following error when i am trying to send data between two R/3 systems using distribution model
    i am unable to distribute the model to the other system
    Error:
    "Target system is an external System. It does not support this function."
    even after successfully generating partner profiles i am getting this error.
    could someone help me out with this problem

    Hi Siddharth
    Can you please update about all the ALE setting that you have done before trying to distribute the model to the other system.
    And whether you have put correctly - the sender and receiver while creating the distribution model. And, most importantly the partner profiles?
    Please update..
    Regards
    Ashish

  • Error while distributing document

    I have one querry in SAP-DMS Document Distribution
    --While i am distributing the document to single recipient it is working fine without  any error and document is received by end recipient
    --While i am trying to distribute same document to multiple document it doesn't delivers the document and in distribution log i can see the status as "ER" and when i am restarting distribution from log screen manually the documents are distributed....
    If any one has idea about it please reply...
    I want to distribute document to multiple recipient automatically.....without restarting the distribution manually from distribution log screen
    Regards,
    Tushar Dave

    Thanks christoph,
    i applied the note 1008281, & it worked
    thanks & regards
    Tushar.

  • Investment mgt:Error while distributing budgets using IM52 transaction code

    I am getting an error message"Availability control can not be activated for hierarchial projects" when I distribute budgets using IM52  transaction code in Investment management.
    Can you please tell me why and how to solve it?
    Edited by: aravind  reddy on Aug 19, 2008 4:34 PM

    I am getting an error message"Availability control can not be activated for hierarchial projects" when I distribute budgets using IM52  transaction code in Investment management.
    Can you please tell me why and how to solve it?
    Edited by: aravind  reddy on Aug 19, 2008 4:34 PM

  • Incorrect distribution -Error while distributing GOA to R3 Backend system

    Hi,
    We have installed SRM server 5.5 and implementing contract Management
    scenario with backend system R/3 4.6B.
    In this scenario we are creating a Global Outline Agreement in SRM
    system and distributing it to the back-end ERP system.
    In SRM5.0 GOA (Trans.type GCTR) that are distributed at Header level
    are failing to distribute to R/3 system v4.6b
    We are getting this error message in SRM transaction SLG1: -
    The error ocurred by processing event RELEASED_NEWLY with GUID
    DCA7101B320134F1949F000347DE470F and object_id= 5600000054 " RECEPIENT
    NOT FOUND"
    The purchasing org , the plant has been mapped .Also vendor & material is maintained for the company & Plant .
    The condition types are mapped in SRM
    Pls suggest.
    Regards,
    Avinash

    Hi Avinash,
    In reference to your query about GOA, the distribution error might be beacause of the issues in BADI implementation.
    By using the BADI you can define which document to be created in the backend.
    BBP_CTR_BE_CREATE BADI can be used in SRM and BBP_CTR BADI can be used in back end R/3 for this purpose.
    Check for the transaction types (GCTR) and the number ranges for the transaction types.
    The GOA will either create a contract or a Scheduling agreement in R/3 back end after distribution.
    Also refer the below SDN thread in this regard :
    Re: Scheduling Agreement from GOA
    Any further clarifications are welcome.
    Award points for suitable answers.
    Rgds,
    Teja

  • Error while distributing a distribution model in BD64

    Hi,
    I am trying to send an IDOC from one client to another client of the same SAP system. To achieve that, i have created the necessary logical systems and made the necessary partner, port configuration as well as RFC Destination. In BD64, I have created a new model and added a BAPI 'SAVEREPLICA' and Object 'BUS1093' using Add BAPI button. But when I am trying to distribute the model it's giving the following error - 'Model view ABCDX has not been updated.  Rreason: Distribution model is currently being processed'.
    Kindly help,
    Thanks in advance,
    Deep.

    Using of BAPI is not accepted between two clients of the same system, you'll have to use different SAP systems

  • Error while distributing the model

    Hi
    I am not able to successfully distribute my model thru BD64. I am getting the error msg as ' the model has not been updated'.The configuration done till now is according to the basic procedure.
    Can anyone please suggest a way to overcome this error.
    thanks

    Hi,
    You can create a distribution model and then add message type to it; however, there are some preconditions which you need to ensure before you create the model.
    Preconditions:
    1) Ensure that you have the message type in both the systems; if custom msg type is used, you need also to create the one in the partner system.
    2) Do all configuration related to msg type, idoc type, etc in your partner system as well
    3) Create RFC destination in the current system for your partner system... and test the connection if it is working fine
    After you create the model and added msg type to it, you also need to do the following:
    1) Go to Edit --> Model View --> Distribute to distribute/ create it in your partner system
    2) To validate, you can check in your partner system if the model is automatically created there
    3) Then create Partner profile in both the systems by going to Environment --> Generate Partner Profiles
    Hope it helps and solves your problem.
    Regards, Tapas
    <Pls award pts if useful or answered>

  • Extract error while distributing Desktop Application

    Hello,
    we have a problem with extracting a Desktop Application on a special
    location. The same TED Dist is working on a few other locations (different
    channels). Also other Distribution work on the specific location. we've
    already deleted all temporary files on the ZFS volume on the subscriber and
    distributer, rebuilded the distribution. We've also deleted the specific
    channel and recreated it, but this didn't solve the problem anyway.
    the error is as following:
    Info 2006/04/12 08:42:02 AM Creating new application failed, Subscriber
    Tree Name= OrgTree, Subscriber DN = Subscriber_WOHNW01.ZFS.WIN01.PD, error
    message: Unknown meaning for error number -1; Please call a Novell support
    provider Also please make sure you set up a working context in the
    Subscriber's properties. was sent successfully to winnw05.intra.pdag.ch
    Error 2006/04/12 08:42:02 AM Extract
    ZFS:\SUB\org~desk_pda.deskapp.zfs.win01.pd\1142589 211390 stopped with
    error: Unknown meaning for error number -1; Please call a Novell support
    provider Also please make sure you set up a working context in the
    Subscriber's properties
    we are running ZENworks 6.5 SP2 Server Management on all servers, but the
    problem was already there without sp2.
    thanks in advance for any help
    jimmy ott

    Are you sure the working context is set?
    Does the working context show up if you look at the ZSM config through
    remote webconsole?
    Rom
    <[email protected]> wrote in message
    news:MB1%f.4628$[email protected]..
    > Hello,
    >
    > we have a problem with extracting a Desktop Application on a special
    > location. The same TED Dist is working on a few other locations (different
    > channels). Also other Distribution work on the specific location. we've
    > already deleted all temporary files on the ZFS volume on the subscriber
    > and
    > distributer, rebuilded the distribution. We've also deleted the specific
    > channel and recreated it, but this didn't solve the problem anyway.
    >
    > the error is as following:
    > Info 2006/04/12 08:42:02 AM Creating new application failed, Subscriber
    > Tree Name= OrgTree, Subscriber DN = Subscriber_WOHNW01.ZFS.WIN01.PD, error
    > message: Unknown meaning for error number -1; Please call a Novell support
    > provider Also please make sure you set up a working context in the
    > Subscriber's properties. was sent successfully to winnw05.intra.pdag.ch
    > Error 2006/04/12 08:42:02 AM Extract
    > ZFS:\SUB\org~desk_pda.deskapp.zfs.win01.pd\1142589 211390 stopped with
    > error: Unknown meaning for error number -1; Please call a Novell support
    > provider Also please make sure you set up a working context in the
    > Subscriber's properties
    >
    > we are running ZENworks 6.5 SP2 Server Management on all servers, but the
    > problem was already there without sp2.
    >
    > thanks in advance for any help
    > jimmy ott

Maybe you are looking for

  • Bluetooth Mighty Mouse & Windows XP using Bootcamp

    Are there plans to add functionality for the bluetooth mighty mouse in Windows XP using bootcamp?? Macbook Pro   Mac OS X (10.4.7)   I run Bootcamp, as well as OS X

  • Warnings

    Hi, The following sample code yealds duplicate definition warnings on the second "for each" statement. I thought the scope of the variable was restricted to the "for each" loop, is this not the case? Thanks in advance Richard Hernandez private functi

  • No sound in yahoo chat after installing the "bios fix"

    I had to do the "bios fix" from toshiba.  Since then I no long have sound in yahoo chat.  I've tried reinstalling the vissta voice fix for yahoo, I've tried uninstalling msngr and upgrading to msngr 10 and nothing seems to work.  Anybody have any ide

  • HP DVD1260I not compatible with windows 8.1

    Recently i bought HP DVD1260I dvd burner, it works fine at first. I have windows 8.1 PC, recently I noticed my Dvd drive is not shown in windows explorer as well as in device mananger, but the dvd drive is shown in BIOS. To check my dvd is working or

  • Difference in port creation in idx1 and we21

    i m in my ABAP stack of XI.. what is the difference in creating port in idx1 and we21