Error while doing billing
Hi every one'
i got an error while doing billing
Error :sub transactions in schema Z step 0001 inconsistent,
this error is comming while using transaction eamabi,
the schema is worked properly since i updated a line item for additional TAX,
and we created new sub transactins for additional vat,AND for the sub transactions i have added a new GL account,
and i have added those Sub transactions in the respective field of the rate,
I have maintained properly all the fica setting for the sub trasactions...like ek01 and ek02 and table te305 & tfktvo as well. Dont understand where the setting have been missed..Please let me kow if you come acrosee this kind of situation.
later i have deleted all the line items in tha same schema,and i have given only quanti01 variant
and does not have any vat related line item maintained at schema even though the same error proposed.
regards
BekMs
I think you need to ask FICA person to fix the subs, This is not billing or rate error. There must be some config missing in sub's and main. If you give another try with any other subs it should work. This will help you to double check too.
GG
Similar Messages
-
Error while Doing Inter Company Billing.
Hi All,
I am getting error while doing Intercompany Billing.
I have done all the assigment for Inter company Billing.
Now i have done F2 invoice and was trying to do IV billing , the SAP gives error " Sales organization is not defined".
I am not able to trace the solution for this problem.
If someone has face similar error or have idea abt this error,please revert back.
-AkashHello,
there are many notes concerning your reuqest:
543821 FAQ: cross-company processing
338922 Analysis note for cross-company transactions (deliv
308989 Consultant note for cross-company transactions
109254 Customizing stock transport order Cross Company
I hope that the information are helpful.
Regards
Claudia
If you are satisfied with the answer, please give Reward Points -
Error ,Field catalog not found while doing billing with DP90
Dear Guru's
while doing billing with DP90 transaction code.i have given service order no xxxx and execute.Then i received the below error
Field catalog not found , Message no. 0K530.Kindly help me in solving the issue.
Thank u
S Babuhi naga suribabu,
I am also facing same issue. can you please help, where to check the configuration for this issue -
Error while posting billing documents
Hi,
I am trying to post billing documents for accounting , but I am getting some error related to number range.
I have checked number range assignments, where else I can check to find out error.
Regards
NidhiIf you are getting error while creating billing document -
Check your number range status assignment in T-Code - VN01
If any userexit is used then check in Userexit MV60AFZZ. There could be a Z-table where the number range may not be properly defined for the Billing Type/ plsnt/etc. as per the settings.
If Billing document is created and you get this error while posting-
Then it would be error with the number range for Accounting Document. Pls. ask the FI person to fix this.
If the above does not solve - pls. mention the exact error with error code.
Thanks -
Error while releasing Billing: Assign HD00 (Frieght) Condition type in COPA
Hi,
I am getting the below error while releasing billing document.
Assign condition HD00 type in COPA
HD00 condition type is frieght condition type
Is it good thing if we assign this condition type to COPA value field in KE4I? or we should not assign Frieght condition to COPA?
Please advise
Thanks
KishoreHI Kishore,
To which GL account are you posting this freight condition value? Is that GL created as a revenue element (of category '11'/'12')?
If yes (has to be 'yes', since you are getting the error message), then you don't have a choice but assigning a CO-PA value field in KE4I. The idea here is, if you have created the GL as revenue element, then you intend to take it to Controlling module for further analysis. Thus, making your FI/CO reconciliation easy.
If you do want to carry this value to CO-PA for analytical reporting then don't create that particular GL (assuming you are posting freight to a separate GL) as a revenue element. That said, it does make sense to carry this value to CO-PA and in your present case, you don't have a choice as the message which you got is an error message, which you can't circumvent.
Hope this helps. -
Why TEXT is not transfering from SD(while doing billing) to Fi ?
Hi Experts,
While doing billing of sales order in SD side,they are entering "text" manually?the same thing is not transfering to the accounting document which generated while billing?
What may be the reason??plz guide.
Regards,
Sumeya.Dear Fernando,
i dont think so,user exit is required to solve this problem.
Actually the "TEXT" was transfering before 31.12.2008 .only the test is not transfering from 1st Jan 2009 to 30th jan 2009.
While debuging the standard programme,the error massage shows,
"Fiscal year varient not defined for the year 2009"
How can it possible??i already defined the fiscal varient V3(april to march with 4 sp.periods) and assigned to co.code.
If anybody have any idea,plz share with me.
Regards,
Sumeya
Edited by: sumeya offrin on Feb 4, 2009 12:55 PM -
Error while doing ABGL Asset Credit Memo
Hi Friends,
I am getting the below error while doing Asset Credit Memo in ABGL. Please help me in fix this issue.
Balance for transaction type group 10 negative for the area 01
Note:In Asset Explorer Fiscal year start Asset value is 98,425.45 and Change is 4768.19. So total Asset value as of now is 1,03,193.64.
Now we are trying to do ABGL with 12,790.23 value (Transaction type is 105). System is giving the above highlighted error.
If we give the amount 4768.19 in ABGL transaction, system is not giving any error. If we give more that that system is giving error.
Why system is giving error even the asset has balance of 1,03,193.64? Please help me on this..
Thanks
SunilHi,
If the asset has been capitalized during earlier years, use ABGF to post credit memo. ABGL is meant for assets capitalized during the year.
Best Regards,
Madhu -
Error while doing "Visulaize Plan"
Hi,
Before i did Visualize plan many times without any problem.Now I am getting error while doing so.
I was able to run "Explain Plan" successfully.
I am on HANA revision 60.
I saved above error log and the log information is given below:
I can identify invalid XML tag <TablesInvolved><![CDATA[raj/AN_VIZ]]></TablesInvolved> but how to fix this issue?
I gone through various blogs related to Visulaization Plan but not found related to this issue.
<Plan xmlns="http://www.sap.com/ndb/planviz" ID="ID_0" Type="Estimated">
<SQL><![CDATA[SELECT KOKRS, BELNR, PERIO, SUM(MEGBTR)
FROM "_SYS_BIC"."raj/AN_VIZ"
GROUP BY KOKRS, BELNR, PERIO]]></SQL>
<CompileTime>
<Start Unit="us">1401281467643661</Start>
<End Unit="us">1401281467658329</End>
</CompileTime>
<RootRelation ID="ID_0" TypeName="PROJECT" Status="Finished">
<Name>Project</Name>
<ExecutionType>Row Search</ExecutionType>
<Summary><![CDATA[raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO, SUM(raj/AN_VIZ.MEGBTR)]]></Summary>
<Location>hanasp7:30003</Location>
<EstimatedCost>
<Exclusive Unit="us">2.12902e+06</Exclusive>
<Inclusive Unit="us">2.64021e+06</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<Details><![CDATA[{"Projected Cols":"raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO, SUM(raj/AN_VIZ.MEGBTR)","Project column0":"NString(4, 0) __trex_field_NVarchar3__() ....... [3]:040:<5/7 (16B)>:
/1/ void* \"__rids__\" ....... [0]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [1]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 0 ....... [2]:LOAD:<4/5 (4B)>:","Project column1":"NString(10, 0) __trex_field_NVarchar3__() ....... [8]:040:<5/7 (16B)>:
/1/ void* \"__rids__\" ....... [5]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [6]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 1 ....... [7]:LOAD:<4/5 (4B)>:","Project column2":"NString(3, 0) __trex_field_NVarchar3__() ....... [13]:040:<5/7 (16B)>:
/1/ void* \"__rids__\" ....... [10]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [11]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 2 ....... [12]:LOAD:<4/5 (4B)>:","Project column3":"Decimal(18, 3) __typecast__() ....... [23]:076:<10/12 (16B)>:
/1/ Fixed16(18, 3) __trex_field_Fixed16__() ....... [19]:043:<6/8 (16B)>:
/1/ void* \"__rids__\" ....... [15]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [16]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 3 ....... [17]:LOAD:<4/5 (4B)>:
/4/ int32_t(10, 0) const := 3 ....... [18]:LOAD:<5/6 (4B)>:
/2/ int32_t(10, 0) const := 18 ....... [21]:LOAD:<8/9 (4B)>:
/3/ int32_t(10, 0) const := 3 ....... [22]:LOAD:<9/10 (4B)>:"}]]></Details>
<Child ID="ID_8" >
</Child>
</RootRelation>
<Relation ID="ID_8" TypeName="TREX_SEARCH" Status="Finished">
<Name>Column Search</Name>
<ExecutionType>Column Search</ExecutionType>
<Summary><![CDATA[Aggregation on a single table]]></Summary>
<Location>hanasp7:30003</Location>
<EstimatedCost>
<Exclusive Unit="us">511194</Exclusive>
<Inclusive Unit="us">511194</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<TablesInvolved><![CDATA[raj/AN_VIZ]]></TablesInvolved>
<LogicalPlan ID="ID_11" Type="Estimated">
<RootRelation ID="ID_11" TypeName="PROJECT" Status="Finished">
<Name>Project</Name>
<EstimatedCost>
<Exclusive Unit="us">0</Exclusive>
<Inclusive Unit="us">0</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<Child ID="ID_12" >
</Child>
</RootRelation>
<Relation ID="ID_12" TypeName="GROUP_BY" Status="Finished">
<Name>Aggregation</Name>
<Summary><![CDATA[raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO\nSUM(raj/AN_VIZ.MEGBTR)]]></Summary>
<EstimatedCost>
<Exclusive Unit="us">0</Exclusive>
<Inclusive Unit="us">0</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<Details><![CDATA[{"Grouping Cols":"raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO","Aggregation Cols":"SUM(raj/AN_VIZ.MEGBTR)"}]]></Details>
<Child ID="ID_13" >
</Child>
</Relation>
<Relation ID="ID_13" TypeName="TABLE" Status="Finished">
<Name>Column View</Name>
<Schema><![CDATA[_SYS_BIC]]></Schema>
<ObjectName><![CDATA[raj/AN_VIZ]]></ObjectName>
<Location>hanasp7:30003</Location>
<EstimatedCost>
<Exclusive Unit="us">0</Exclusive>
<Inclusive Unit="us">0</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>682404</EstimatedOutputCardinality>
</Relation>
</LogicalPlan>
</Relation>
</Plan>
Regards
RajHi,
To solve this you must update your studio. In lower studio versions (PlanViz) does not allow "unknown" XML tags sent by higher version servers. A fix for this issue was made so that PlanViz parser can simply skip unknown tags.
Please go to version 74, if possible.
Regards,
Michael -
Error while doing EHP4 upgrade in downtime phase
HI .
Iam facing the below error while doing the EHP4 upgrade , in downtime phase.
Checks after phase MAIN_SWITCH/STARTSAP_TRANS were negative!
Last error code set: RFC call to subst_get_uvers failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 >
Connect to SAP gateway failed Connect_PM GWHOST=Hydhtc4526D, GWSERV=sapgw04, SYSNR=04 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.136.162.30:3304' not reached TIME Mon Jun 06 18:17:46 2011 RELEASE 720 COMPONENT NI (network interface) VERSION 40 RC -10 MODULE nixxi.cpp LINE 3286 DETAIL NiPConnect2: 10.136.162.30:3304 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER System start failed
Please help me in resolving this error.
Sanketh.Hi,
Upgrade tool is trying to start the system but system is not coming up. Try to start system manually and see if system comes up or not. If not then check logs in work directory for why system is not coming up.
Thanks
Sunny -
Error while doing GR for scheduling aggrement
Dear Experts,
We are facing error while doing GR for scheduling aggrement.
we have done the following steps.
1) Scheduling aggreement in ME31L
2) Released in ME35L
3) Mainatined Sch.Agmt Schdule in ME38 for todays and date 200 qty and other line is 800 qty.
When we are trying to do GR in MIGO system is giving the following message.
Document 5500000152 does not contain any selectable items
can I know what I have missed in the above steps.
Please guide me to resolve this.
Regards,
PrasadHi,
Please check Please check if Gr is already done against this document. Also please check whether you have attached SA in the source list with line items.
T-code:ME01
Enter Mat.code & Plant.
In the next screen pl.do the following:
Valid from - commencement date of the SA
Valid to - End date of the SA
Vendor - Vendor on whom the SA is released
POrg - Your purchase organisation
PPL - Leave it blank(This is only for interplant)
OUn - Ordering unit
Agreement - SA number
Item - 1
I hope this will resolve your issue. Thanking you -
Error While doing ABT1N transaction
Hi,
I am facing the below error while doing ABT1N in Asset Accounting.Please help me in fixing this Issue.
Error Message -No depreciation area for receiving the revenue
Message no.AAPO149
Diagnosis
You tried to post a retirement on asset 1000 100007-0.You entered transaction type 300,in which the retirement with revenue indicator is not set
You tried to transfer asset 1000 100007-0.According to transfer variant 0001,none of the areas on the asset uses a transaction type for retirement with revenue
In both of these cases, you are not allowed to enter revenue or make specifications for the determination of revenue.
Proceedure
Check the transfer variant and check your entry
please do the needful
Thanks
SupriyaHello,
You will have a check box for the same.
Double click on transaction type, you will see the check box for revenue.
Otherwise, tomorrow I will get back to you once I am in front of the system.
Regards,
Ravi
Edited by: Ravi Sankar Venna on May 5, 2009 7:53 PM -
Error while doing F-90 Asset Acquisation
Hi,
I am getting the below error while doing F-90 Asset Acquisation scenario. Please help me to fix this issue.
Tax code V1 country IN does not exist in procedure TAXINN
Message no. FF713
Diagnosis
You entered a tax code which is not defined for the country of the company code to be posted to in the tax calculation procedure.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the system settings.
To do this, choose Maintain entries (F5).
Check whether the company code is assigned to the correct country and whether the correct tax calculation procedure has been entered for the company code country.
Create a new tax code if necessary.
Caution:
Since it is possible that the tables in question are being updated at a different time on another computer, it can take a certain amount of time for the tax code to be on all local machines in client server architectures after saving the new code.
Thanks
KBHi,
you need to maintain Tax Code A0 & V0 in t.code OBCL t.code.
and also ensure to check whether you have created tax code V1 or not in FTXP t.code. If not, create V1 tax code and assign GL on that in the right Transaction event keys in OB40.
Try.... if not working let me know....
Regards,
MOhan. -
Error while doing AIAB Settlement
Hi I am facing the below error while doing AIAB during AUC settlement. Please do the needful.
Data for determination of capitalization not managed in area 01
Message no. AW507
Diagnosis
You have chosen a depreciation area, which does not carry the depreciation data from table COEPBR.
Procedure
Choose a different depreciation area.
Thanks
KCHi,
This message could be helpful:
Error AW507
Please check the field T082AVIEWB-AUTHORITY. If it is not on 2 this is the reason.
In this case, you can change the value in T093-VIEW1 using the coding as per SAP note 29706 which you have already discovered. There will be no risk involved in changing this value.
regards Bernhard -
Error while doing AUC Settlement in KO88
Hi
I am getting the below error while doing KO88. I have maintained the Allocation structure for FXA and given the cost element group in the Source field & Given FXA in Receiver category and selected By cost element option aginast Receiver category FXA in Settlement Cost Element field. I am getting the below error while settling in KO88.
Define a settlement cost element for receiver type FXA
Message no. KD506
Diagnosis
In allocation structure A1 (controlling area BP01), you did not define which cost element should be used when settling costs/revenues of the sender. Nor did you define receiver type FXA.
Procedure
Assign a different allocation structure to the settlement sender (-> Master data -> Settlement rule -> Goto -> Settlement parameters), or maintain allocation structure A1.
Please help me
Thanks
KishorePlease check your allocation structure , it looks that settlement cost element that you have assigned in the allocation strcuture is not having correct cost element category.
regards
Ranjan -
Error while doing BAM configuration in JDeveloper
Hi,
I tried to create a connection to my local BAM Server in JDev 10.1.3.2.0 and also in 10.1.3.3, but I always failed! Error messages:
"Server is not set up correctly SOA1"
I'm running on Windows 2003 and installed BAM according to the Installation Guide (version was Bam with Enterprise Link for windows 10.1.3.3.0).
I did not get any error while doing the other setups and can access the different BAM tools via the Oracle BAM Start page, but I can't create a connection in JDev. I used the following parameters:
Host Name: SOA1(system name)
Port Number: 80
User Name: Administrator
Password: <windows domain pwd>
Domain Name: DOMAINNAME
Any help would be highly appreciated.
Regards,
Shailyhi Shaily
It looks like suggesting a different forum is not needed, because you already tried that ...
Error while doing BAM connection in jdeveloper
Error while doing BAM connection in jdeveloper
Error while doing BAM connection in jdeveloper
I hope you get some answers.
success
Jan Vervecken
Maybe you are looking for
-
Sub-contracting with chargeable component.
Hi All, I am doing following scenario Scenario: Sub-contracting with chargeable component. Activity: Clearing (Consumption-Based) T Code - /n/SAPNEA/JSCR19 Amount: 23,100,000 While action posting, we are getting following error message Error Message:
-
External hard drive & MAC!!!! HELP
I connected my external hard drive (which I have been using with my windows PC the past years) to my Macbook Pro. It showed up as a device on the MAC but wasn't showing up any of the files so i unplugged it and tried it in my PC! Now my PC won't even
-
HT1296 how do i transfere music from window media to itunes
How do i transfer music from window media to itunes?
-
Yellow status does not start j2E server0
Hi Gurus, Everything was working fine until today. SDM and dispatcher green light but server0 yellow status for about for 1 hour now and still does not start. Status starting framework... your help is greatly appreciated. defaultTrace.1.trc below:
-
Find the routine frm the program name
Hi, Is it possible to find out which routine( in VOFM) the below program is refering to? Program : LV60AA58 Thanks Keshi