Error while doing Challan updation

Dear all,
   Iam getting error while doing Challan updation, system shows an error saying "No line Item exist for Challan updation" whereas iam having all the data but the system is not picking.
pls help on this
will get a good points for solving this

I understood ur problem, u r running the J1INCHLN when u r running this program . Program chks both the Table BSEG & WITH_ITEM they 2 field from BSEG-BUZEI & WITH_ITEM -J_1IBUZEI . if this 2 line item is not matching then system will show the same error which u have mentioned.
Whether this has occured first time or rarely it occurs, if first then just update the table WITH_ITEM for the field J_1IBUZEI with respect to BSEG-BUZEI for the TDS line item only. Make the changes with help of ur Internal consultant. write an update program.

Similar Messages

  • Error while doing J1IH (Excise JV) - TR6 Challan posting

    I am getting the following error while doing,  J1IH (Excise JV) - TR6 Challan posting
    Please assist....
    Short text
        The COMMIT WORK processing must not be interrupted.
    What happened?
        Error in the ABAP Application Program
        The current ABAP program "SAPLFACS" had to be terminated because it h
        come across a statement that unfortunately cannot be executed.
    What can you do?
        Note down which actions and inputs caused the error.
        To process the problem further, contact you SAP system
        administrator.
        Using Transaction ST22 for ABAP Dump Analysis, you can look
        at and manage termination messages, and you can also
        keep them for a long time.
    Error analysis
        During the COMMIT WORK statement, the following are executed:
        - the routines registered with the statement PERFORM .. ON COMMIT,
        - the registered methods for the events of the object services
          and
        - possibly the local update (SET UPDATE TASK LOCAL).
        An exception was raised and caught. The normal sequence of the routines
        was interrupted by this resulting in the program being continued before
        the call of COMMIT WORK. As this can lead to inconsistencies, the
        processing cannot be continued in the normal way.

    Thanks Milind...
    I am also getting the following error:
    Balance in transaction currency
        Message no. F5702
    Diagnosis
        A balance has occurred in transaction currency 'INR' with the following
        details:
        Exchange rate '00', amount '       500,000.00' and currency key 'INR'.
        The data in the transaction currency were transferred from the calling
        application.
    System Response
        Your data cannot be processed in FI.
    Procedure
      The error is probably in the calling application.
    Please assist

  • Error while doing an INSERT or an UPDATE to the DB(MS Access)

    I get the following error while inserting or updating the database (MS Access in my case). However, the record does get inserted or updated. Please advice. I just want to get rid of the error to utilize my form.
    Error :ado2xfa operation failed. It, cannot be found in the collection corressponding to the requested name or ordinal
    Thanks.

    If you mean fix it, by continuing to use an insert statement and not have the error appear, then no. The best you can do is catch the error and ignore it and hope this continues to work in the future.
    The way not to get the error would be to use the addNew() and update() methods of the data connection, where the values in the bound fields would be updated in the DB.
    Chris
    Adobe Enterprise Developer Support

  • Update termination error while doing PGR

    Hi,
    I got this error while doing PGR, please do suggest the dolution.
    Update was terminated
    System ID....   DPT
    Client.......   900
    User.....   SDUSER
    Transaction..   VL02N
    Update key...   4BEAA8A2A6DA0609E1000000AC1107A7
    Generated....   12.05.2010, 18:38:55
    Completed....   12.05.2010, 18:38:56
    Error Info...   Update program: I/O error Error; function Update, RC= 4, key
    Thanks,
    Swapnil

    Hi Lakshmipathi,
    I have checked the analysis in SM13, got the folllowing,
    Function Module        SERIALNUMBER_POST
    Status                        Update was terminated
    Report                        LIEP1U01
    Row                            159
    Error details   Class:     IS         Number:    229
    Update program: I/O error Error; function Update, RC= 4, key

  • Getting Error while doing Control Panel - Windows Update Error code is 80070103

    Getting Error while doing Control Panel -> Windows Update Error code is 80070103. The optional Windows 7 update is
    Microsoft - Other hardware - WinUsb Device
    Please provide your email ID to send the Error screen shot.

    Hi!
    Check the following link to see if it solves your problem:
    http://support.microsoft.com/kb/952032
    Best regards
    Andreas Molin
    Andreas Molin | Site: www.guidestomicrosoft.com | Twitter: andreas_molin

  • Error while doing "Visulaize Plan"

    Hi,
    Before i did Visualize plan many times without any problem.Now I am getting error while doing so.
    I was able to run "Explain Plan" successfully.
    I am on HANA revision 60.
    I saved above error log and the log information is given below:
    I can identify invalid XML tag <TablesInvolved><![CDATA[raj/AN_VIZ]]></TablesInvolved> but how to fix this issue?
    I gone through various blogs related to Visulaization Plan but not found related to this issue.
    <Plan xmlns="http://www.sap.com/ndb/planviz" ID="ID_0" Type="Estimated">
    <SQL><![CDATA[SELECT KOKRS, BELNR, PERIO, SUM(MEGBTR)
    FROM "_SYS_BIC"."raj/AN_VIZ"
    GROUP BY KOKRS, BELNR, PERIO]]></SQL>
    <CompileTime>
      <Start Unit="us">1401281467643661</Start>
      <End Unit="us">1401281467658329</End>
    </CompileTime>
    <RootRelation ID="ID_0" TypeName="PROJECT" Status="Finished">
      <Name>Project</Name>
      <ExecutionType>Row Search</ExecutionType>
      <Summary><![CDATA[raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO, SUM(raj/AN_VIZ.MEGBTR)]]></Summary>
      <Location>hanasp7:30003</Location>
      <EstimatedCost>
       <Exclusive Unit="us">2.12902e+06</Exclusive>
       <Inclusive Unit="us">2.64021e+06</Inclusive>
      </EstimatedCost>
      <EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
      <Details><![CDATA[{"Projected Cols":"raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO, SUM(raj/AN_VIZ.MEGBTR)","Project column0":"NString(4, 0)  __trex_field_NVarchar3__() ....... [3]:040:<5/7 (16B)>:
      /1/ void*  \"__rids__\" ....... [0]:NOP:<0/1 (8B)>:
      /2/ int32_t(10, 0) const := 0 ....... [1]:LOAD:<3/4 (4B)>:
      /3/ int32_t(10, 0) const := 0 ....... [2]:LOAD:<4/5 (4B)>:","Project column1":"NString(10, 0)  __trex_field_NVarchar3__() ....... [8]:040:<5/7 (16B)>:
      /1/ void*  \"__rids__\" ....... [5]:NOP:<0/1 (8B)>:
      /2/ int32_t(10, 0) const := 0 ....... [6]:LOAD:<3/4 (4B)>:
      /3/ int32_t(10, 0) const := 1 ....... [7]:LOAD:<4/5 (4B)>:","Project column2":"NString(3, 0)  __trex_field_NVarchar3__() ....... [13]:040:<5/7 (16B)>:
      /1/ void*  \"__rids__\" ....... [10]:NOP:<0/1 (8B)>:
      /2/ int32_t(10, 0) const := 0 ....... [11]:LOAD:<3/4 (4B)>:
      /3/ int32_t(10, 0) const := 2 ....... [12]:LOAD:<4/5 (4B)>:","Project column3":"Decimal(18, 3)  __typecast__() ....... [23]:076:<10/12 (16B)>:
      /1/ Fixed16(18, 3)  __trex_field_Fixed16__() ....... [19]:043:<6/8 (16B)>: 
         /1/ void*  \"__rids__\" ....... [15]:NOP:<0/1 (8B)>:
         /2/ int32_t(10, 0) const := 0 ....... [16]:LOAD:<3/4 (4B)>:
         /3/ int32_t(10, 0) const := 3 ....... [17]:LOAD:<4/5 (4B)>:
         /4/ int32_t(10, 0) const := 3 ....... [18]:LOAD:<5/6 (4B)>: 
      /2/ int32_t(10, 0) const := 18 ....... [21]:LOAD:<8/9 (4B)>:
      /3/ int32_t(10, 0) const := 3 ....... [22]:LOAD:<9/10 (4B)>:"}]]></Details>
      <Child ID="ID_8" >
      </Child>
    </RootRelation>
    <Relation ID="ID_8" TypeName="TREX_SEARCH" Status="Finished">
      <Name>Column Search</Name>
      <ExecutionType>Column Search</ExecutionType>
      <Summary><![CDATA[Aggregation on a single table]]></Summary>
      <Location>hanasp7:30003</Location>
      <EstimatedCost>
       <Exclusive Unit="us">511194</Exclusive>
       <Inclusive Unit="us">511194</Inclusive>
      </EstimatedCost>
      <EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
      <TablesInvolved><![CDATA[raj/AN_VIZ]]></TablesInvolved>
      <LogicalPlan ID="ID_11" Type="Estimated">
       <RootRelation ID="ID_11" TypeName="PROJECT" Status="Finished">
        <Name>Project</Name>
        <EstimatedCost>
         <Exclusive Unit="us">0</Exclusive>
         <Inclusive Unit="us">0</Inclusive>
        </EstimatedCost>
        <EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
        <Child ID="ID_12" >
        </Child>
       </RootRelation>
       <Relation ID="ID_12" TypeName="GROUP_BY" Status="Finished">
        <Name>Aggregation</Name>
        <Summary><![CDATA[raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO\nSUM(raj/AN_VIZ.MEGBTR)]]></Summary>
        <EstimatedCost>
         <Exclusive Unit="us">0</Exclusive>
         <Inclusive Unit="us">0</Inclusive>
        </EstimatedCost>
        <EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
        <Details><![CDATA[{"Grouping Cols":"raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO","Aggregation Cols":"SUM(raj/AN_VIZ.MEGBTR)"}]]></Details>
        <Child ID="ID_13" >
        </Child>
       </Relation>
       <Relation ID="ID_13" TypeName="TABLE" Status="Finished">
        <Name>Column View</Name>
        <Schema><![CDATA[_SYS_BIC]]></Schema>
        <ObjectName><![CDATA[raj/AN_VIZ]]></ObjectName>
        <Location>hanasp7:30003</Location>
        <EstimatedCost>
         <Exclusive Unit="us">0</Exclusive>
         <Inclusive Unit="us">0</Inclusive>
        </EstimatedCost>
        <EstimatedOutputCardinality>682404</EstimatedOutputCardinality>
       </Relation>
      </LogicalPlan>
    </Relation>
    </Plan>
    Regards
    Raj

    Hi,
    To solve this you must update your studio. In lower studio versions (PlanViz) does not allow "unknown" XML tags sent by higher version servers. A fix for this issue was made so that PlanViz parser can simply skip unknown tags.
    Please go to version 74, if possible.
    Regards,
    Michael

  • Error in Bank Challan update

    Hi Experts,
    Am a fresher in SAP and your help would be highly appreciated.
    The issue is regarding the bank challan update. My client has paid TDS through an intercompany bank account and while bank challan update the intercompany bank is not accepted. To elaborate further with an example : For Company Code OPQR ,they have paid TDS through bank account 11010415 & house bank  60001 which pertains to company code  WXYZ.  Now when they are updating the bank challan for company code  OPQR  the same house  bank is not getting accepted and the error says:
    House Bank 60001 dosent exist for OPQR company code.
    Message No 8I713
    I have checked and found out that the particular housebank has not been created for company code OPQR. But am not sure whether the creation of this particualr housebank for the particular company code is the actual way to resolve this error or may be some other concepts are involved.
    Would be great if you can pls guide.
    Thanks in advance for your support.
    Rgds
    DB

    Dear Debjani,
    Sorry by late. I thought my imputs wasn't helpful.
    I suggest you create same bank for required company code. Copy all entries in t-code FBZP from original home bank and define also: OBBA, OBBB, OBBD, OB47 and OT55.
    About Business Place, it is an organizational unit below company code level that is primarily used for reporting taxes on sales/purchases.
    In some countries, the business place is also used to assign official document numbers to outgoing documents. In Brazil we assign it in invoices to be able change some company code data in DME generation during F110.
    Read more here:
    http://help.sap.com/saphelp_dimp50/helpdata/en/36/41913ab525fb23e10000000a114084/content.htm
    Let me know if it clarifies
    Regards

  • Error while doing F-90 Asset Acquisation

    Hi,
    I am getting the below error while doing F-90 Asset Acquisation scenario. Please help me to fix this issue.
    Tax code V1 country IN does not exist in procedure TAXINN
    Message no. FF713
    Diagnosis
    You entered a tax code which is not defined for the country of the company code to be posted to in the tax calculation procedure.
    System Response
    Procedure
    Check and, if necessary, correct the entry.
    Procedure for System Administration
    If it is not an input error, check and possibly change the system settings.
    To do this, choose Maintain entries (F5).
    Check whether the company code is assigned to the correct country and whether the correct tax calculation procedure has been entered for the company code country.
    Create a new tax code if necessary.
    Caution:
    Since it is possible that the tables in question are being updated at a different time on another computer, it can take a certain amount of time for the tax code to be on all local machines in client server architectures after saving the new code.
    Thanks
    KB

    Hi,
    you need to maintain Tax Code A0 & V0 in t.code OBCL t.code.
    and also ensure to check whether you have created tax code V1 or not in FTXP t.code. If not, create V1 tax code and assign GL on that in the right Transaction event keys in OB40.
    Try.... if not working let me know....
    Regards,
    MOhan.

  • Error while doing billing

    Hi every one'
    i got an error while doing billing
    Error :sub transactions in schema Z step 0001 inconsistent,
    this error is comming while using transaction eamabi,
    the schema is worked properly since i updated a line item for additional TAX,
    and we created new sub transactins for additional vat,AND for the sub transactions i have added a new GL account,
    and i have added those Sub transactions in the respective field of the rate,
    I have maintained properly all the fica setting for the sub trasactions...like ek01 and ek02 and table te305 & tfktvo as well. Dont understand where the setting have been missed..Please let me kow if you come acrosee this kind of situation.
    later i have deleted all the line items in tha same schema,and i have given only quanti01  variant
    and does not have any vat related line item maintained at schema even though the same error proposed.
    regards
    BekMs

    I think you need to ask FICA person to fix the subs, This is not billing or rate error. There must be some config missing in sub's and main. If you give another try with any other subs it should work. This will help you to double check too.
    GG

  • Error while doing settlement from WBS to P&L Account

    Hello
    I am trying to do a settlement from WBS to P&L Account(Expense account). In this case, "Dummy" Prof Ctr is getting derived from 0KE5 (we have maintained a dummy prof ctr). We have set the validations to disallow any postings/settlements to dummy prof ctr. Hence I am getting an error while doing settlement.
    Now I am maintaning a Prof ctr in my WBS master data. I am unable to understand why system is deriving dummy prof ctr and not the one maintained on WBS master data. The settlements are working fine when I do them against Balance sheet accounts and proper prof ctr is getting derived, which is being maintained on WBS master data. I am getting trouble only while doing settlement to my P&lL i.e. expense accounts.
    can anyone throw some light on this?
    Thks
    Sarang

    Dear Sarang,
    You have maintained profit center in WBS master which is not updated at the time settlement to FI that what makes you worried. If you are making FI posting and give WBS as an additional account assignment then Profit center in WBS master will be updated. Here in settlement WBS is sender not the receiver so that profit center will not be updated. In settlement receiver (any) is debited and sender (WBS) is credited so this credit entry will be updated in profit center.
    To your second query that when you carry out settlement to balance sheet account right profit center is updated then please make sure, that balance sheet account is maintained in 3KEH with profit center or OKB9.
    Your P&L account (expense) receives dummy profit center because it is not able to find cost center which can fetch profit center from the master. So, if you can afford, maintain that cost elements (expense account) with profit center in OKB9.
    might help you..........................................................

  • Error while doing F-22 entry

    Hi,
    I am getting the below error while doing F-22. Kindly help me how to over come this Bug..
    Error Message : Express Document "Update was terminated" received from author RWRGV1
    Please help me why this is coming and how to fix this to post the document?
    Many Thanks
    Sunil

    Hi,
    Go to transaction SM13 and give the username as RWRGV1 and then execute.
    It will show you the task failed to be updated. You can go in details by double clicking on this task to find where it has failed.
    Regards,
    Gaurav

  • Error while doing settlement

    Hi,
    I am getting the below error while doing the settelment
    Program Errors: no COBRB found 001
    Kindly advice me
    Thanks
    Supriya

    Hi Supriya,
    COBRB is table for Settlement Rules for Order Settlement. Debug if the Table itself is missing or table contains no entries to be picked up for settlement...
    Pls revert back with update...
    Srikanth Munnaluri

  • Error while doing ABGL Asset Credit Memo

    Hi Friends,
    I am getting the below error while doing Asset Credit Memo in ABGL. Please help me in fix this issue.
    Balance for transaction type group 10 negative for the area 01
    Note:In Asset Explorer Fiscal year start Asset value is 98,425.45 and Change is 4768.19. So total Asset value as of now is 1,03,193.64.
    Now we are trying to do ABGL with 12,790.23 value (Transaction type is 105). System is giving the above highlighted error.
    If we give the amount 4768.19 in ABGL transaction, system is not giving any error. If we give more that that system is giving error.
    Why system is giving error even the asset has balance of 1,03,193.64? Please help me on this..
    Thanks
    Sunil

    Hi,
    If the asset has been capitalized during earlier years, use ABGF to post credit memo.  ABGL is meant for assets capitalized during the year.
    Best Regards,
    Madhu

  • Error while doing EHP4 upgrade in downtime phase

    HI .
    Iam facing the below error while doing the EHP4 upgrade , in downtime phase.
    Checks after phase MAIN_SWITCH/STARTSAP_TRANS were negative!
    Last error code set: RFC call to subst_get_uvers failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 >
    Connect to SAP gateway failed Connect_PM GWHOST=Hydhtc4526D, GWSERV=sapgw04, SYSNR=04  LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.136.162.30:3304' not reached TIME Mon Jun 06 18:17:46 2011 RELEASE 720 COMPONENT NI (network interface) VERSION 40 RC -10 MODULE nixxi.cpp LINE 3286 DETAIL NiPConnect2: 10.136.162.30:3304 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER System start failed
    Please help me in resolving this error.
    Sanketh.

    Hi,
    Upgrade tool is trying to start the system but system is not coming up. Try to start system manually and see if system comes up or not. If not then check logs in work directory for why system is not coming up.
    Thanks
    Sunny

  • Error while trying to update to ios 5

    I keep getting an error while trying to update to iOS 5. I update iTunes this morning to the lastest version so I know that isn't the problem. I have tried restarting both my computer and my phone, but contine getting "The iPhone could not be restore. An unknow error occurred (3194)." PLease help! Thanks in advance

    I am also getting the error 43 when the update tries to back the phone up. Im using the latest version of itunes. This is on an iphone4, I am in the UK.
    I tried deleting all of the historical backups to see if a fresh backup folder helps. It did not.
    Ive tried running iTunes in 'administrator' mode on my Windows 7 machine. This made no difference.
    Ive tried putting the phone in airplane mode. No difference.
    I tried getting it into restore mode just to see if it worked on a iphone4. However it did not seem to want to do it.
    Im not not too sure about proceeding with this update as I done want to loose any of the apps I have. (or 3 my 3 stars in every angry birds level on all 3 versions of the game!!)
    Please someone, HELP !! !!

Maybe you are looking for