Error while doing goods issue of finished goods

Dear All,
When I try to issue fineshed good to project using transaction code MIGO, I get the following error:
"WBS element xxxx does not exist" and the message line shows " Variant xxxxx is deleted."
Kindly help me in solving this problem.
Regards,
Shynu John

I am not sure why it has happened ? May be some inconsistency, but if you wanted to check than change the date of project and try to reverse the GI. The the project date is not having any direct linkage with WBS posting.
With regards
Nitin P.

Similar Messages

Error while doing Goods receipt for process order. Error code: "BS027"

I am getting error while doing GR for a day whereas previous day(s) GR is already done and also 2 days post that day are also done successfully.
Error : ""Goods receipt for prodn. order" is not allowed (ORD XX-CEMTSAL) " (XX = First two characters of plant code)
Error code: BS027.
Thanks to all in advance.

Hello,
This issue would occur when you want to post a confirmation for a production order. The error message is generated if you wanted to post a backflush for a component and if this component was assigned to a sales order stock. The sales order itself was assigned to a work breakdown structure element which should be debited with the actual costs. However, the business transaction 'Confirm' is not permitted for a work breakdown structure.
Please look into SAP Note 62367 and 64370
Hope the information is helpful
regards

I am getting error while doing MFBF for semifinisg good

Hi,
i am getting error while doing MFBF for semifinisg good
Existing standard cost estimate cannot be used
Message no. RM175
Diagnosis
This error appears under the following circumstances:
The existing standard cost estimate cannot be used for backflushing activities as the repetitive manufacturing profile was not maintained correctly when the standard cost estimate was carried out.
The standard cost estimate must come from product costing. Other cost estimates (such as base object controlling) are not possible.
Procedure
The repetitive manufacturing profile assigned to the material at the time of the planned cost estimate must be a profile for repetitive manufacturing with product cost collector.
Use product costing to create the standard cost estimate.

I had already check REM profile repetitive mfg profile final backflush w. activities.
this particular material is semifinish material attached in BOM of finish material.
backflush of finish good is possible but now new requirement is to do production booking for the semifinish material.
i had assign production version , done routing and maintain REM profile,
created material cost with quantity structure ck11n then run the costing in ck40n.
still getting the error what else is to done to able to book this thru MFBF.

Error while doing GR against STO in IS Retail

Hi.
I am getting an Error while doing the GR against STO.
The error is "Enter goods receipts for vendor only. Message no. M7107". I am not able to understand the reason for the GR checking the vendor where it should consider the supplying site as vendor as the GR is being done against a delivery.
I have checked the Inforecord and the source list which is correctly maintained
(i doubt whether they are to be considered).
Kindly suggest...
Regards,
Vinod Kapote.

Hi Vinod Kapote,
Check following IMG Settings in your system;
(a) Schema for Stock transports
(b) Shipping data for Site
Hope you have carried out following activities;
(1) Purchase order with document type UB
(2) Outbound delivery using VL10B
(3) Post Goods Issue using VL02N
(4) Goods Receipt using MIGO
Bye,
Muralidhara

Error while doing GR : Deficit of PU GR quantity 5 EA

I am getting the below error while doing the reversal of GR:
Deficit of PU GR quantity 5 EA : <material><plant><pur grp>
Please let me know the solution to rectify it.
Thanks in advance.

Hi,
Check the latest goods issue docs for this quantity and cancel that GI doc. This will bring the required stock to enable you cancel the GR. After creating new GR, cancel the "cancelled GI doc" to complete the loop.
or
Increase the stock by doing GR against 501. After new GR, cancel this 501 doc.
or
Post issue return (202) for this quantity. After new GR, cancel this 202 doc.
or
thro' physical inventory, you can add the stock. After new GR, make another PI doc. to set right the stock.
While the first option is a best one, based on your urgency/superior approval, you may opt for other options also.
Regards,
Siva

Error while doing outbound delivery against Purchase Order

hello
i m getting error while doing Outbound delivery for purchase order as follows
EKPO-SOBKZ=E; EKPO-UMSOK=_; EKPO-KZBWS<>_ EKPO-KZVBR<>E (Note 305582) not supported (check your entry)
Message no. M7146, i m not getting wht will be the reason,
Regards
NISHJ

Please go through the note - 305582. It is clearly given the direction.
Symptom
You try to post a goods movement for a stock transport order from the unrestricted-use stock into the sales order stock or project stock.
During the goods issue, the system displays error message M7146 with a text along the lines of "EKPO-SOBKZ=E; EKPO-KZVBR<>E; ... not supported".
Cause and prerequisites
In the goods issue for the stock transport order, the system may have to create a stock in transit which is deconstructed during the goods receipt. If the withdrawal takes place from the special stock, it is clear which is the receiving stock.
However, if the withdrawal is carried out from the unrestricted-use stock ("Collective requirements", controlled by the dependent requirements indicator MARC-SBDKZ in the material master of the issuing plant), this results in the design problem that the control tables of the goods movement do not have any key field for the receiving stock. Therefore, the control for the receiving stock is controlled via the consumption indicator in the account assignment category of the purchase order. The consumption indicator therefore requires a specific default setting (you may have assumed you could change the design of these control tables, however this is not possible).
Using an inappropriate consumption indicator then causes for the goods issue an incorrect or no stock in transit to be created so that the goods receipt fails.
Solution
Implement the program change in accordance with the correction instructions.
Afterwards implement Note 413908 immediately if this is relevant for your release.

Error while doing "Visulaize Plan"

Hi,
Before i did Visualize plan many times without any problem.Now I am getting error while doing so.
I was able to run "Explain Plan" successfully.
I am on HANA revision 60.
I saved above error log and the log information is given below:
I can identify invalid XML tag <TablesInvolved><![CDATA[raj/AN_VIZ]]></TablesInvolved> but how to fix this issue?
I gone through various blogs related to Visulaization Plan but not found related to this issue.
<Plan xmlns="http://www.sap.com/ndb/planviz" ID="ID_0" Type="Estimated">
<SQL><![CDATA[SELECT KOKRS, BELNR, PERIO, SUM(MEGBTR)
FROM "_SYS_BIC"."raj/AN_VIZ"
GROUP BY KOKRS, BELNR, PERIO]]></SQL>
<CompileTime>
<Start Unit="us">1401281467643661</Start>
<End Unit="us">1401281467658329</End>
</CompileTime>
<RootRelation ID="ID_0" TypeName="PROJECT" Status="Finished">
<Name>Project</Name>
<ExecutionType>Row Search</ExecutionType>
<Summary><![CDATA[raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO, SUM(raj/AN_VIZ.MEGBTR)]]></Summary>
<Location>hanasp7:30003</Location>
<EstimatedCost>
   <Exclusive Unit="us">2.12902e+06</Exclusive>
   <Inclusive Unit="us">2.64021e+06</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<Details><![CDATA[{"Projected Cols":"raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO, SUM(raj/AN_VIZ.MEGBTR)","Project column0":"NString(4, 0) __trex_field_NVarchar3__() ....... [3]:040:<5/7 (16B)>:
/1/ void* \"__rids__\" ....... [0]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [1]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 0 ....... [2]:LOAD:<4/5 (4B)>:","Project column1":"NString(10, 0) __trex_field_NVarchar3__() ....... [8]:040:<5/7 (16B)>:
/1/ void* \"__rids__\" ....... [5]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [6]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 1 ....... [7]:LOAD:<4/5 (4B)>:","Project column2":"NString(3, 0) __trex_field_NVarchar3__() ....... [13]:040:<5/7 (16B)>:
/1/ void* \"__rids__\" ....... [10]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [11]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 2 ....... [12]:LOAD:<4/5 (4B)>:","Project column3":"Decimal(18, 3) __typecast__() ....... [23]:076:<10/12 (16B)>:
/1/ Fixed16(18, 3) __trex_field_Fixed16__() ....... [19]:043:<6/8 (16B)>:
     /1/ void* \"__rids__\" ....... [15]:NOP:<0/1 (8B)>:
     /2/ int32_t(10, 0) const := 0 ....... [16]:LOAD:<3/4 (4B)>:
     /3/ int32_t(10, 0) const := 3 ....... [17]:LOAD:<4/5 (4B)>:
     /4/ int32_t(10, 0) const := 3 ....... [18]:LOAD:<5/6 (4B)>:
/2/ int32_t(10, 0) const := 18 ....... [21]:LOAD:<8/9 (4B)>:
/3/ int32_t(10, 0) const := 3 ....... [22]:LOAD:<9/10 (4B)>:"}]]></Details>
<Child ID="ID_8" >
</Child>
</RootRelation>
<Relation ID="ID_8" TypeName="TREX_SEARCH" Status="Finished">
<Name>Column Search</Name>
<ExecutionType>Column Search</ExecutionType>
<Summary><![CDATA[Aggregation on a single table]]></Summary>
<Location>hanasp7:30003</Location>
<EstimatedCost>
   <Exclusive Unit="us">511194</Exclusive>
   <Inclusive Unit="us">511194</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<TablesInvolved><![CDATA[raj/AN_VIZ]]></TablesInvolved>
<LogicalPlan ID="ID_11" Type="Estimated">
   <RootRelation ID="ID_11" TypeName="PROJECT" Status="Finished">
    <Name>Project</Name>
    <EstimatedCost>
     <Exclusive Unit="us">0</Exclusive>
     <Inclusive Unit="us">0</Inclusive>
    </EstimatedCost>
    <EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
    <Child ID="ID_12" >
    </Child>
   </RootRelation>
   <Relation ID="ID_12" TypeName="GROUP_BY" Status="Finished">
    <Name>Aggregation</Name>
    <Summary><![CDATA[raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO\nSUM(raj/AN_VIZ.MEGBTR)]]></Summary>
    <EstimatedCost>
     <Exclusive Unit="us">0</Exclusive>
     <Inclusive Unit="us">0</Inclusive>
    </EstimatedCost>
    <EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
    <Details><![CDATA[{"Grouping Cols":"raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO","Aggregation Cols":"SUM(raj/AN_VIZ.MEGBTR)"}]]></Details>
    <Child ID="ID_13" >
    </Child>
   </Relation>
   <Relation ID="ID_13" TypeName="TABLE" Status="Finished">
    <Name>Column View</Name>
    <Schema><![CDATA[_SYS_BIC]]></Schema>
    <ObjectName><![CDATA[raj/AN_VIZ]]></ObjectName>
    <Location>hanasp7:30003</Location>
    <EstimatedCost>
     <Exclusive Unit="us">0</Exclusive>
     <Inclusive Unit="us">0</Inclusive>
    </EstimatedCost>
    <EstimatedOutputCardinality>682404</EstimatedOutputCardinality>
   </Relation>
</LogicalPlan>
</Relation>
</Plan>
Regards
Raj

Hi,
To solve this you must update your studio. In lower studio versions (PlanViz) does not allow "unknown" XML tags sent by higher version servers. A fix for this issue was made so that PlanViz parser can simply skip unknown tags.
Please go to version 74, if possible.
Regards,
Michael

Error while doing Challan updation

Dear all,
Iam getting error while doing Challan updation, system shows an error saying "No line Item exist for Challan updation" whereas iam having all the data but the system is not picking.
pls help on this
will get a good points for solving this

I understood ur problem, u r running the J1INCHLN when u r running this program . Program chks both the Table BSEG & WITH_ITEM they 2 field from BSEG-BUZEI & WITH_ITEM -J_1IBUZEI . if this 2 line item is not matching then system will show the same error which u have mentioned.
Whether this has occured first time or rarely it occurs, if first then just update the table WITH_ITEM for the field J_1IBUZEI with respect to BSEG-BUZEI for the TDS line item only. Make the changes with help of ur Internal consultant. write an update program.

Error while doing picking

Hi Gurus,
I am getting a error while doing picking manually which is as below.
"Batches/valuationclass not completed"
Please tell me the what is the cause.
Thanks and Regards,
Anand.

Hi Anand,
It seems that your batch number field in delivery is greyed out. During goods receipt check whether the batchs are maintained for the material or not. If not maintained maintain the batches for the material. First check the GR.
regards
prasad

Error while doing PGI for Outbound delivery using BAPI BAPI_GOODSMVT_CREATE

Hi All,
I am getting an below error while doing PGI for outbound delivery using the BAPI BAPI BAPI_GOODSMVT_CREATE:
Goods movement not possible with mvmt type 601
Can anyone suggest me what will be the solution for it?
Regards,
Raghuraman.k

I tried with the above BAPI but it is not working.
In my case a delivery has one line item with batch split and other line item without batch split.
Below is my code :
DATA : gwa_header_data TYPE bapiobdlvhdrcon,
       gwa_header_ctrl TYPE bapiobdlvhdrctrlcon,
       lv_delivery     TYPE bapiobdlvhdrcon-deliv_numb,
       git_item_data TYPE STANDARD TABLE OF bapiobdlvitemcon,
       gwa_item_data TYPE bapiobdlvitemcon,
       git_item_ctrl TYPE STANDARD TABLE OF bapiobdlvitemctrlcon,
       gwa_item_ctrl TYPE bapiobdlvitemctrlcon,
       git_return    TYPE STANDARD TABLE OF bapiret2,
       gwa_return    TYPE bapiret2.
*Header data
gwa_header_data-deliv_numb = '0808000002'.
*Header Control data
gwa_header_ctrl-deliv_numb = '0808000002'.
gwa_header_ctrl-post_gi_flg = 'X'.
*Delivery Number
lv_delivery = '0808000002'.
*Item data and its corresponding control data
gwa_item_data-deliv_numb      = '0808000002'.
gwa_item_data-deliv_item      = '900002'.
gwa_item_data-dlv_qty         = 4.
gwa_item_data-dlv_qty_imunit = 4.
gwa_item_data-fact_unit_nom   = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb      = '0808000002'.
gwa_item_ctrl-deliv_item      = '900002'.
gwa_item_ctrl-chg_delqty      = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
gwa_item_data-deliv_numb      = '0808000002'.
gwa_item_data-deliv_item      = '900003'.
gwa_item_data-dlv_qty         = 6.
gwa_item_data-dlv_qty_imunit = 6.
gwa_item_data-fact_unit_nom   = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb      = '0808000002'.
gwa_item_ctrl-deliv_item      = '900003'.
gwa_item_ctrl-chg_delqty      = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
gwa_item_data-deliv_numb      = '0808000002'.
gwa_item_data-deliv_item      = '000020'.
gwa_item_data-dlv_qty         = 10.
gwa_item_data-dlv_qty_imunit = 10.
gwa_item_data-fact_unit_nom   = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb      = '0808000002'.
gwa_item_ctrl-deliv_item      = '000020'.
gwa_item_ctrl-chg_delqty      = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
BREAK-POINT.
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CONFIRM_DEC'
EXPORTING
    header_data    = gwa_header_data
    header_control = gwa_header_ctrl
    delivery       = lv_delivery
TABLES
    item_data      = git_item_data
    item_control   = git_item_ctrl
    return         = git_return.
BREAK-POINT.
IF git_return IS INITIAL.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF.

Error while doing ABGL Asset Credit Memo

Hi Friends,
I am getting the below error while doing Asset Credit Memo in ABGL. Please help me in fix this issue.
Balance for transaction type group 10 negative for the area 01
Note:In Asset Explorer Fiscal year start Asset value is 98,425.45 and Change is 4768.19. So total Asset value as of now is 1,03,193.64.
Now we are trying to do ABGL with 12,790.23 value (Transaction type is 105). System is giving the above highlighted error.
If we give the amount 4768.19 in ABGL transaction, system is not giving any error. If we give more that that system is giving error.
Why system is giving error even the asset has balance of 1,03,193.64? Please help me on this..
Thanks
Sunil

Hi,
If the asset has been capitalized during earlier years, use ABGF to post credit memo. ABGL is meant for assets capitalized during the year.
Best Regards,
Madhu

Error while doing GR for scheduling aggrement

Dear Experts,
We are facing error while doing GR for scheduling aggrement.
we have done the following steps.
1) Scheduling aggreement in ME31L
2) Released in ME35L
3) Mainatined Sch.Agmt Schdule in ME38 for todays and date 200 qty and other line is 800 qty.
When we are trying to do GR in MIGO system is giving the following message.
Document 5500000152 does not contain any selectable items
can I know what I have missed in the above steps.
Please guide me to resolve this.
Regards,
Prasad

Hi,
Please check Please check if Gr is already done against this document. Also please check whether you have attached SA in the source list with line items.
T-code:ME01
Enter Mat.code & Plant.
In the next screen pl.do the following:
Valid from - commencement date of the SA
Valid to - End date of the SA
Vendor - Vendor on whom the SA is released
POrg - Your purchase organisation
PPL - Leave it blank(This is only for interplant)
OUn - Ordering unit
Agreement - SA number
Item - 1
I hope this will resolve your issue. Thanking you

Error While doing ABT1N transaction

Hi,
I am facing the below error while doing ABT1N in Asset Accounting.Please help me in fixing this Issue.
Error Message -No depreciation area for receiving the revenue
Message no.AAPO149
Diagnosis
You tried to post a retirement on asset 1000 100007-0.You entered transaction type 300,in which the retirement with revenue indicator is not set
You tried to transfer asset 1000 100007-0.According to transfer variant 0001,none of the areas on the asset uses a transaction type for retirement with revenue
In both of these cases, you are not allowed to enter revenue or make specifications for the determination of revenue.
Proceedure
Check the transfer variant and check your entry
please do the needful
Thanks
Supriya

Hello,
You will have a check box for the same.
Double click on transaction type, you will see the check box for revenue.
Otherwise, tomorrow I will get back to you once I am in front of the system.
Regards,
Ravi
Edited by: Ravi Sankar Venna on May 5, 2009 7:53 PM

Error while doing F-90 Asset Acquisation

Hi,
I am getting the below error while doing F-90 Asset Acquisation scenario. Please help me to fix this issue.
Tax code V1 country IN does not exist in procedure TAXINN
Message no. FF713
Diagnosis
You entered a tax code which is not defined for the country of the company code to be posted to in the tax calculation procedure.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the system settings.
To do this, choose Maintain entries (F5).
Check whether the company code is assigned to the correct country and whether the correct tax calculation procedure has been entered for the company code country.
Create a new tax code if necessary.
Caution:
Since it is possible that the tables in question are being updated at a different time on another computer, it can take a certain amount of time for the tax code to be on all local machines in client server architectures after saving the new code.
Thanks
KB

Hi,
you need to maintain Tax Code A0 & V0 in t.code OBCL t.code.
and also ensure to check whether you have created tax code V1 or not in FTXP t.code. If not, create V1 tax code and assign GL on that in the right Transaction event keys in OB40.
Try.... if not working let me know....
Regards,
MOhan.

Error while doing File to File Scenario

All,
I am trying a simple file to file scenario - where xi picks up the file from a location and maps the message and dumps it in another location.
I am Getting the below error while doing the same .........
Time Stamp Status Description
2009-03-30 14:30:24 Success Channel Test_send_cc: Send binary file "d:\input\input.xml". Size 203 with QoS EO
2009-03-30 14:30:24 Success Application attempting to send an XI message asynchronously using connection AFW.
2009-03-30 14:30:24 Success Trying to put the message into the send queue.
2009-03-30 14:30:24 Success Message successfully put into the queue.
2009-03-30 14:30:24 Success The application sent the message asynchronously using connection AFW. Returning to application.
2009-03-30 14:30:24 Error Attempt to delete file "d:\input\input.xml" after processing failed. Retry
2009-03-30 14:30:24 Success The message was successfully retrieved from the send queue.
2009-03-30 14:30:24 Success The message status set to DLNG.
*+2009-03-30 14:30:24 Error Transmitting the message to endpoint http://filip:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 401 : Unauthorized.*
2009-03-30 14:30:24 Success The asynchronous message was successfully scheduled to be delivered at Mon Mar 30 14:35:24 GMT+05:30 2009.
And i cant see the meesages using the SXMB_MONI trasaction
please help me resolve ths issue
Regards,
Mahesh.
Edited by: mahesh uma on May 3, 2008 2:12 PM

Hi Uma,
Go through this links::
Hope these links are useful to you..
Urgent: Message not transmitted from AFW to Integration server
Error with huge file
File to JDBC error
Thanks,
Satya Kumar..

Error while doing goods issue of finished goods

Similar Messages

Maybe you are looking for