Error while doing MB1B ( movement type is 413E)
Dear friends,
when we are trying to do the tranfer posting (MB1B), system is throwing an error, it is "Characteristic value ZOLC( Sales document ype) does not exist for characteristic WW207 (Sales Order Type)
Message no. KE0C133".
As per as my concern In "CO" module some settings have to be done for CO-PA
Cna somebody pls tell the solution.
Full points will be rewarded.
Thanks in advance
Regards
Gupta
hi,
pl check t.code KEA5, and the operating concern settings with respect to your profit center. However to be sure, please do take the help of your FI consultants help on this.
regards
sadhu kishore
Similar Messages
-
CO related error while doing MB1B & movement type 413 E
Dear friends,
when we are trying to do the tranfer posting (MB1B), system is throwing an error, it is "Characteristic value ZOLC does not exist for characteristic WW207 (Sales Order Type)
Message no. KE0C133".
As per as my concern In "CO" module some settings have to be done for CO-PA
Cna somebody pls tell the solution.
Full points will be rewarded.
Thanks in advance
Regards
GuptaDear Anandrajan,
Thanks for the reply.
I had tried with KE4I t.code, but it is asking for the condition type. Actually ZOLC is a sales document type, it is not condition type. Can u pls give me some more inputs.
Thanks in advance
Regards
G.S.Gupta -
Guyz,
Firstly despite the plant+storage location + warehouse no. assignments are done , my replenishment delivery (delivery for stock transport order between plants under same company code) is not picking up storage location and warehouse no and thus stopping me from doing picking and PGI (post goods issue).
However in VL02N when i'm trying to change storage location for line item, i'm getting following weird error
*Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /*
I found a SAP Note(133223) regarding this error and VL02 transaction but that note was specific to older versions. I'm on ECC 6.0
Any suggestions please ?
ThanksWarehouse managment has its own movement types, most identical to inventory management movement types.
These WM movement types are determined via reference movement types.
the error you have just looks like your customizing is not complete.
IMG > LE > WM > Interfaces > IM > define movement types. -
Error while determining ref.mov.type for WM via table 156S:601///
Hi SAP gurus
while doing delivery i am getting error like
Error while determining ref.mov.type for WM via table 156S:601///
please give me needful solution
regards
SarveshChk via
SPRO>LE>WM>Interfaces>IM>Define mvt>Assign MVt reference...and then LE-WM interface...
maintina the correspoding entries..
BR,
Krishna -
Error messag -'Error while determining ref.mov.type for WM via Table 156S:'
Hi Guys,
I am currently facing some issues with respect to the deliver creation.
The scenario is somthing like this.
I have assigned a FOC Item category to an Consignment Issue order type.
The system is able to determine the Item category successfully.
However when the delivery is created it throws an error message
'Error while determining ref.mov.type for WM via Table 156S: 903/X/X/W/L/X/'
Not sure why this occurs.
All the settings seem to be set.
If any one of you can help me out it would be great.
Thanks.
Regards,
PandiDear Pandiraj
The standard process is that consignment issue order should be created with reference to Proforma invoice. Having said that I dont understand why you have assigned a FOC item category to issue order. Not sure, whether this will work. Also I feel that you should explain in detail the process for which you are configuring this.
thanks
G. Lakshmipathi -
Hello SAP gurus,
My issue is while doing MB1B with movement type 909 system is throwing error message saying u201Ccombination of movement type/special stock/stock type is not possibleu201D .can someone please let me know which setting is missing here.
Regards,
ShaHi
There can be problem with stock type also, check whether you're trying to post from unrestricted/QM/blocked and it is allowed for this combination. In some cases, posting will be allowed only from unrestricted stock.
Thanks !
E.Avudaiappan
Edited by: Avudaiappan E on Jun 28, 2011 4:44 PM -
Error while copying a movement type
Hi all,
I want to create an movement type alternate to 501which will only update the qty not the value.
1. For this I have copied movement type 501 through t code OMJJ.
2. While copying I changed the target movement type as "Y01".
3. Selected the option of "Copy all dependent entries"
Now i wanted to modify/delete some dependent entries to get the desired result, but unable to do so.
such as in section "Update control / WM movement types" , I want to have only 3 lines and want to delete all other lines of special stocks, but unable to do so.
Similarly with field "Account grouping", system not allowing me to delete any entries.
Please suggest.
BKRHi,
You just need to delete two items from the customizing view, go to next step, that will be okay!
Regards
Tao -
Error while creating new Movement Type
All SAP Gurus,
We are creating a new Z movement type by copying the 101 movement type (T code: OMJJ).
But system is not allowing to create a new movement type and giving an error message as 'Specify the key within the work area'.
We are unable to create a new movement type due to this error.
Please help...................
Regards,How did solve the problem
plz let me know
thanks. -
Error of serial no while doing stock movement 343
Hello all gurus
please help me out I am in junk state.my problame is
I am doing the stock movement from blocked stock to unrestricted stock through Mb1B movement type 343
when i m doing this system asking serial no i m searching the serial no by giving plant n stor loc system autometically showing a no
but when selecting the ser no and putting enter the system showing an error that (this ser no is not suitable for the movement type)
plz help me out naa I am in a crunch situation
thank you all in advance
your valuable suggestion is highly appreciableDear skmohankuda ,
In IQ03, check what is the status of the serial number which is coming and revert back.
Thanks & Regards,
Hegal K Charles -
Error while doing MIRO-Overflow for arithmetical operation (type P) in prog
Hi ,
I am getting the error while doing the MIRO as below-
Runtime Errors COMPUTE_BCD_OVERFLOW
Exception CX_SY_ARITHMETIC_OVERFLOW
Date and Time 20.05.2009 10:07:03
Short text
Overflow during the arithmetical operation (type P) in program "SAPLMRMC".
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLMRMC" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_ARITHMETIC_OVERFLOW', was not
caught in
procedure "MRM_AMOUNT_QUANTITY_PROPOSE" "(FUNCTION)", nor was it propagated by
a RAISING clause.
Since the caller of the procedure could not have anticipated that the
Please let me know how can this be removed.Hi,
There can be some problem with tolerances set in the customizing.
In my case, I was getting this error because of delivery date variance. The difference between delivery date maintained in PO and invoice date was huge and hence the multiplication of price of PO and difference of delivery date was huge and that was the reason for error.
Similarly in your case also, there will be some tolerance limit problem.
Please check your tolerance limits set in customizing.
Regards,
Mihir Popat -
Hi All,
I'm working on IDES, I got a error while doing MB1C with movement type 561. Error is "Error accessing functional module : FMFK_FIKRS_READ. Parameter : IP_FIKRS, IP_FMA_OBJNR"
Regards
NagendraHi Lakshmipathi
How to deactive the functional module ? Just now I had checked Functional Module, IP_FIKRS is Financial Management Area and IP_FMA_OBJNR is Object number. If I deactive does this leads to some other problem ?
Kindly guide me.
Regards
Nagendra -
Error while doing PGI for Outbound delivery using BAPI BAPI_GOODSMVT_CREATE
Hi All,
I am getting an below error while doing PGI for outbound delivery using the BAPI BAPI BAPI_GOODSMVT_CREATE:
Goods movement not possible with mvmt type 601
Can anyone suggest me what will be the solution for it?
Regards,
Raghuraman.kI tried with the above BAPI but it is not working.
In my case a delivery has one line item with batch split and other line item without batch split.
Below is my code :
DATA : gwa_header_data TYPE bapiobdlvhdrcon,
gwa_header_ctrl TYPE bapiobdlvhdrctrlcon,
lv_delivery TYPE bapiobdlvhdrcon-deliv_numb,
git_item_data TYPE STANDARD TABLE OF bapiobdlvitemcon,
gwa_item_data TYPE bapiobdlvitemcon,
git_item_ctrl TYPE STANDARD TABLE OF bapiobdlvitemctrlcon,
gwa_item_ctrl TYPE bapiobdlvitemctrlcon,
git_return TYPE STANDARD TABLE OF bapiret2,
gwa_return TYPE bapiret2.
*Header data
gwa_header_data-deliv_numb = '0808000002'.
*Header Control data
gwa_header_ctrl-deliv_numb = '0808000002'.
gwa_header_ctrl-post_gi_flg = 'X'.
*Delivery Number
lv_delivery = '0808000002'.
*Item data and its corresponding control data
gwa_item_data-deliv_numb = '0808000002'.
gwa_item_data-deliv_item = '900002'.
gwa_item_data-dlv_qty = 4.
gwa_item_data-dlv_qty_imunit = 4.
gwa_item_data-fact_unit_nom = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb = '0808000002'.
gwa_item_ctrl-deliv_item = '900002'.
gwa_item_ctrl-chg_delqty = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
gwa_item_data-deliv_numb = '0808000002'.
gwa_item_data-deliv_item = '900003'.
gwa_item_data-dlv_qty = 6.
gwa_item_data-dlv_qty_imunit = 6.
gwa_item_data-fact_unit_nom = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb = '0808000002'.
gwa_item_ctrl-deliv_item = '900003'.
gwa_item_ctrl-chg_delqty = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
gwa_item_data-deliv_numb = '0808000002'.
gwa_item_data-deliv_item = '000020'.
gwa_item_data-dlv_qty = 10.
gwa_item_data-dlv_qty_imunit = 10.
gwa_item_data-fact_unit_nom = 1.
gwa_item_data-fact_unit_denom = 1.
APPEND gwa_item_data TO git_item_data.
gwa_item_ctrl-deliv_numb = '0808000002'.
gwa_item_ctrl-deliv_item = '000020'.
gwa_item_ctrl-chg_delqty = 'X'.
APPEND gwa_item_ctrl TO git_item_ctrl.
BREAK-POINT.
CALL FUNCTION 'BAPI_OUTB_DELIVERY_CONFIRM_DEC'
EXPORTING
header_data = gwa_header_data
header_control = gwa_header_ctrl
delivery = lv_delivery
TABLES
item_data = git_item_data
item_control = git_item_ctrl
return = git_return.
BREAK-POINT.
IF git_return IS INITIAL.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
ENDIF. -
Hello SAP gurus,
I am getting error message u201CCombination of movement type/special stock/stock type is not possibleu201D while doing 552 W. And this error message is only for those materials which are batch managed. If material is not managed by batch then I can do to transaction.
Can someone please help me on this?
Thanks
ShaYou are confusing me. Initially you wrote that you get this message only for batch managed materials
I am getting error message u201CCombination of movement type/special stock/stock type is not possibleu201D while doing 552 W. And this error message is only for those materials which are batch managed. If material is not managed by batch then I can do to transaction.
in your last message you wrote, that the material is not batch managed.
>
Shayan Sharma wrote:
And that material is not batch managed.
> So my doubt is u2013 is this the reason because for that material 551 w is not done while doing 552 W we are getting that error message - u201CCombination of movement type/special stock/stock type is not possibleu201D.
By the way, it works in my system for both cases, with and without batch managment. -
Error while doing ABGL Asset Credit Memo
Hi Friends,
I am getting the below error while doing Asset Credit Memo in ABGL. Please help me in fix this issue.
Balance for transaction type group 10 negative for the area 01
Note:In Asset Explorer Fiscal year start Asset value is 98,425.45 and Change is 4768.19. So total Asset value as of now is 1,03,193.64.
Now we are trying to do ABGL with 12,790.23 value (Transaction type is 105). System is giving the above highlighted error.
If we give the amount 4768.19 in ABGL transaction, system is not giving any error. If we give more that that system is giving error.
Why system is giving error even the asset has balance of 1,03,193.64? Please help me on this..
Thanks
SunilHi,
If the asset has been capitalized during earlier years, use ABGF to post credit memo. ABGL is meant for assets capitalized during the year.
Best Regards,
Madhu -
Hi guys,
I have this error : Error while processing a command type "WriteSettings" in plug-in "servermgr_netboot"
This happens when I select an image as default in NetInstall, OS X Server 2.1.1
It happened also in version 2.1
Otherwise, NetInstall is working fine when I connect from an other mac through my network.
Every other services work fine too.
Does someone else have this issue ?
Thanx for you helpHi guys,
I have this error : Error while processing a command type "WriteSettings" in plug-in "servermgr_netboot"
This happens when I select an image as default in NetInstall, OS X Server 2.1.1
It happened also in version 2.1
Otherwise, NetInstall is working fine when I connect from an other mac through my network.
Every other services work fine too.
Does someone else have this issue ?
Thanx for you help
Maybe you are looking for
-
Playing media files from Time Capsule hard drive
Hello folks, I am using my 3TB Time Capsule to host all of my video files, most of which are MKV files. I also have an external hard drive connected to the USB port on Time Capsule and there are few video files on it as well. I am using Time Capsule
-
Hi all! I have a question. The same problem in Illustrator CS6 (but it appears from a few version of CS back). I have document in an Illustrator. The document is generally for print, I don't using them to making website, so without using Slice tool.
-
My imessenger on my iPad isn't working. When I try to sign in it says "an error occurred during activation try again" . I don't understand why it isn't working.
-
Exporting a book as individual indesign documents
HI Can anyone tell me if I am able to export a 32page document in indesign into individual spreads as indesign documents...???
-
(X)HTML vs Adobe Air vs ?
Hi, In my small office I'm using a self designed, simple file (as in dossiers, not docs) management app that I'm still working on, providing new functionalities as we go. Currently, I use plain XHTML, CSS, PostgreSQL, LDAP and calDAV. To be able to u