Error while doing migo PO not yet release

Hi experts,
While doing posting in Migo for a PO . it showing error
"Purchasing document not yet released."
But i have already released. and while seeing the header details in ME22n, it showing as released.
pls help
regards
arun

Hi,
I have checked in PO all are released and the indicator is in Release only R.
The confirmation key also not ticked.
but still showing that error message while posting
regards
arun

Similar Messages

No rfc destination defined for global trade services error while doing migo

Hi all,
Pls help me in fixing the following error..
"no rfc destination defined for global trade services" error while doing migo

i guess you will be getting dumps in the background in ST22. Can you please check this and post the details if there are any dumps?
Meanwhile, check this note:
Note 1098491 - MIGO:Termination MESSAGE_TYPE_X with IO 304 (subcontracting)
Cheers,
Jazz

WBS error while doing MIGO

Dear Experts,
I am getting following error while performing MIGO - The WBS element XXXXXXX is not the lowest level in the project.
Kindly let me know what does this error mean and how to resolve the issue.
Thanks in advance
Leena

Leena0 wrote:
- The WBS element XXXXXXX is not the lowest level in the project.
>
It seems there is a validation in the system which checks whether any child WBSE is available. It might be a business requirement to post actual cost only on the lowest WBSE. It could be a user exit. Please check the functional specifications prepared during the implementation.

Spool error while doing migo

Dear MM Experts,
While doing migo i am getting error as "Error in spool c call spool overflow"
Got this thread but not getting exactly : http://forums.sdn.sap.com/thread.jspa?messageID=4528971#452897
Please help me out.
Thanks & Regards,
Sandeep.

Hi all
Delete the old spool request using SPAD .
regards,
reza rostami / mapna

Error while doing MIGO for a sub-contracted item

Hello to Everybody,
I am facing below problem -
Error : Incorrect CCtr <Cost Center Code> with this account (CCtr category must=D) for
<Item Code> , while doing MIGO. (for receiving sub-contracted item from vendor).
May I request for possible solution to above error ?
regards,

Dear Sanjay,
You can determine the cost object for the posting of the costs in the transaction OKB9.
Following thread should resolve this issue:
Re: cost of subcontracting
Regards,
Naveen.

Error while doing MIGO

Hi Experts,
While doing migo system showing the error message:
in this purchase order no excise.
It is IS OIL process.
Maintain pricing conditions for the material for the excise invoice date
Message no. 8I629
Pls help some one.
Regards,
Hanuman.

HI
is it Excisable Material, did you maintain the Tax indicator in PO stage? IF yes , next step is to check , are you selecting the right Post to....... register menu during MIGO, for example we use Post to Part-1 register only, then if yes , the you are getting this error becuse you have missed the J1ID master data details. Minimum you should maintain 1. chapter_id details, 2. Material and chapter_id combination 3. Vendor Excise details. for the materials you are tring to make GR.
Best Regards
SAM

Getting ABAP runtime error while doing MIGO-GR against PO.

Hi,
Getting ABAP runtime error message while doing GR against PO.
47 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_01 SPOTS ES_SAPLMBWL STATIC.
48
49 ENHANCEMENT-POINT MB_POST_GOODS_MOVEMENTS_02 SPOTS ES_SAPLMBWL.
50    CALL FUNCTION 'MB_CREATE_MATERIAL_DOCUMENT_UT'
51         EXCEPTIONS
52           error_message = 4.
53 * As soon as we have started to put things into UPDATE TASK, we must
54 * ensure that errors definitely terminate the transaction.
55 * MESSAGE A is not sufficient because it can be catched from
56 * external callers which COMMIT WORK afterwards, resulting in
57 * incomplete updates. Read note 385830 for the full story.
58    IF NOT sy-subrc IS INITIAL.
>>       MESSAGE ID sy-msgid TYPE x NUMBER sy-msgno WITH            "385830
60                  sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
61 *     MESSAGE A263.
62    ENDIF.
63 * Optische Archivierung
64 * Spaete Erfassung mit Barcode
65 * Redesign of barcode handling -> note 780365
66   PERFORM barcode_update(sapmm07m) USING xmkpf-mblnr
67                                          xmkpf-mjahr
68                                          barcode.
69
70   MOVE-CORRESPONDING xmkpf TO emkpf.
71   CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
72     EXCEPTIONS
73       error_message = 4.
74    MOVE-CORRESPONDING xmkpf TO emkpf.
75    CALL FUNCTION 'MB_MOVEMENTS_REFRESH'
76         EXCEPTIONS
77           error_message = 4.
78    IF NOT sy-subrc IS INITIAL.
Any pointers
Code Formatted by: Alvaro Tejada Galindo on Jan 14, 2010 6:00 PM

Hi ,
Any inputs
for this error
No RFC destination is defined for SAP Global Trade Services
Regards
Ashu

Error while doing MIGO:-Choose valuatlion type

Dear All,
        Can anybody suggest me on this issue. while doing GR system showing Choose Valuation type. IN process Order there is one material which is having 2 components.In two components for one component there is no valuation category is not maintained.
       Let me know whether error is coming due to this configuration.

Hi ,
         Are doing GR against process order in MB31 ? In that case system will check valuation category of Fert only is it?
Are you maintaining split Valuation for FG material?

Dump error while doing migo

>I am trying to do migo for a standard po. after doing all the entries the document is showing "document ok". But while posting the gr i am getting an error "the curent application triggered a termination with a short dump.Account 24840000 is blocked for posting. Trigger location of runtime error. Program SAPLMWBL.
>Can anyone guide to remove this error. Full points will be rewarded for a correct solution.
>thanks in advance.
>Ashutosh

DEAR ASHITOSH,
A/C 24840000 MAY BE BLOCKED FOR POSTINGS.
PL. CHECK THIS OR CONTACT UR FI TEAM
REAGARDING THIS.
HOPE THIS WILL SOLVE UR PROBLEM
AMOL

Getting Error while doing MIGO

Hello Gurus,
I am facing one problem recently. While I m doing MIGO_GR against PO, I am getting the error for Account Determination Key and Document Splitting. I have gone through all the configuration for Document splitting & Account Determination and found all correct.
I created PO on 01.03.2008 for 10000 Qty and i was doing MIGO_GR partially. When i m trying to do MIGO_GR for the rest of qty. I m getting the error for Account Determination key and Document splitting.
It very urgent and right now i m searching for work around solution.
Can anybody help me pls in this regards??
Its very urgent!!!!
Regards,
Jigar

Hi,
Message No. is GLT2152.
Account Determination 01001/missing
Procedure :
either check the splitting rule or create the account determination key.
I checked all these scenarios.
I m using 6.0 version
I am purchasing the material and i have already activated document splitting. earlier i was not getting any error though document splitting was activated.
What should i do?
Thanx in advance
Regards,
Jigar

Error while doing VKM1 SD Document - Credit Release

Hi Guys,
Its a very unusual situation.
I am Trying to VKM1 an Sales order. It gets released but when i try to save it it gives a pop up window displaying Project Network order and gives message List of orders cannot be Locked?
I try to process it .. it times out.
We are using assembly processing.
Please suggest

Can you tell the error message number ??
thanks
G. Lakshmipathi

Error while doing migo for STO order

hi,
we have done migo wrt the outbound delivery number and due to wrong invoice values they have cancelled the GR and again they are going to do the GR but system is not allowing to post the document since there is an entry in rg23d table with the specified invoice number.how to cancel the rg23d entry.
please help
regards
msp

Hi,
Cancel the Excise Invoice which is captured at the time of GR and post it.
And do the GR with new excise invoice.

S:ZMESS:021 Error while doing MIGO (GRN)

Dear Guru,
I am facing the problem in GRN error is "A:MESS:021"
Please help to solve this problem.
Thanks in advance.
Raj.

Hi,
Need to update Kernel Patches.Check with Basis Consultant.
Refer Notes 19466 & 318846.
Regards,
Biju K

Message no. QA495 error while doing migo through movement type 322

Dear Experts,
Please help.
I searched for this content but didn't get content matching my requirement.
I am trying to do stock transfer through movement type 322 when this error message is stopping me from posting the document.For this material inspection set up is active.
I want to transfer the stock from unrestricted area to quality inspection stock.Can you please suggest how to transfer the stock from unrestricted to quality inspection for this material.Can I do it with some t.code in QM.
If so please guide me how to transfer the stock.
Kind regards,
Pradeesh.P

Hi,
Basically, system is preventing you from managing stock of QM controlled material through non-QM transactions. You must be getting this error "Change the inspection stock in QM only"
You can post this quantity into QI via two methods,
Activate inspection type 08 for this material and then do the 322 mvmt. This will move the quantity into QI with an additional inspection lot of 08 origin.
Take complete quantity out of QI, Deactivate existing 'Stock relevant' inspection types and then do the 322 mvmt.
I'll suggest you to go with first option as it is more feasible and convenient.
And, this issue has been discussed several times and there are plenty of threads available on this. Im not sure why didn't you find any
ntn

While doing migo gertting error does not support serial management

while doing migo 101mvt type getting error does not suppoert serial no management .
Moderator: Please, avoid asking basic one-sentence questions. Your other threads were locked for the same reason

Hi,
Can you please check SAP Note 1262966 - MIGO and MIRO: Missing entries in T169P. This might be of some help to you. It states that
You use transaction SM31 to delete an entry in the views V_169P_A, V_169P_B, V_169P_DC, V_169P_IRTAX, V_169P_K, V_169P_LOGO, V_169P_MB, V_169P_PA, V_169P_PR, V_169P_S, V_169P_SA or V_169P_SV. The entry from the table T169P is deleted when you delete the entry from one of the views.
Different follow-on errors can occur in the transactions for inventory management or the Logistics Invoice Verification.
Error M7 001 "Check table 169P: entry & & & does not exist" occurs in the transactions for inventory management. The system does not propose any data for order-related items in the transactions for the Logistics Invoice Verification.
The entry in the table T169P is required for each company code for the function from Note 980420.
Thnx,
SG.

Error while doing migo PO not yet release

Similar Messages

Maybe you are looking for