Error while doing QAC2 after QA11
Hi all,
we are using QM for quality inspection. After goods receive(MIGO), the stock goes to U101 quality storage location.
Then stock is transferred to QA01 quality stock by using QAC2 tcode. Then user need to do the usage decision & sample calculation by QA11 Tcode.
Now situation is After goods receive, User has done QA11, so now stock moved to U101 unrestricted stock.Now user want to move the stock to QA01 storage location.
i cancelled the Inspection lot created by QA11 so that the stock came to U101 quality stock. Now i need to transfer the stock
from U101 to QA01 using QAC2 Tcode but i am getting error as below.
Error --> while executing QAC2 one small pop up screen come & error on the screen is "The function you selected can not be carried out"
How to solve this error . please suggest.
Thanks
pabi
In SAP once UD is done stock can not be moved back to the same inspection lot.
You can transfer stock from one storage location to another using MB1B -301 movement
or transfer stock form Un-restricted to Quality stock using MB1B-322 movement.
If 08 Inspection type is active, SAP will automatically create a new inspection lot.
This inspection lot can then be processed like any other inspection lot.
Hope this helps.
AKM
Similar Messages
-
Error while doing EHP4 upgrade in downtime phase
HI .
Iam facing the below error while doing the EHP4 upgrade , in downtime phase.
Checks after phase MAIN_SWITCH/STARTSAP_TRANS were negative!
Last error code set: RFC call to subst_get_uvers failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 >
Connect to SAP gateway failed Connect_PM GWHOST=Hydhtc4526D, GWSERV=sapgw04, SYSNR=04 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.136.162.30:3304' not reached TIME Mon Jun 06 18:17:46 2011 RELEASE 720 COMPONENT NI (network interface) VERSION 40 RC -10 MODULE nixxi.cpp LINE 3286 DETAIL NiPConnect2: 10.136.162.30:3304 SYSTEM CALL connect ERRNO 10061 ERRNO TEXT WSAECONNREFUSED: Connection refused COUNTER System start failed
Please help me in resolving this error.
Sanketh.Hi,
Upgrade tool is trying to start the system but system is not coming up. Try to start system manually and see if system comes up or not. If not then check logs in work directory for why system is not coming up.
Thanks
Sunny -
Error while doing F-90 Asset Acquisation
Hi,
I am getting the below error while doing F-90 Asset Acquisation scenario. Please help me to fix this issue.
Tax code V1 country IN does not exist in procedure TAXINN
Message no. FF713
Diagnosis
You entered a tax code which is not defined for the country of the company code to be posted to in the tax calculation procedure.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the system settings.
To do this, choose Maintain entries (F5).
Check whether the company code is assigned to the correct country and whether the correct tax calculation procedure has been entered for the company code country.
Create a new tax code if necessary.
Caution:
Since it is possible that the tables in question are being updated at a different time on another computer, it can take a certain amount of time for the tax code to be on all local machines in client server architectures after saving the new code.
Thanks
KBHi,
you need to maintain Tax Code A0 & V0 in t.code OBCL t.code.
and also ensure to check whether you have created tax code V1 or not in FTXP t.code. If not, create V1 tax code and assign GL on that in the right Transaction event keys in OB40.
Try.... if not working let me know....
Regards,
MOhan. -
Error while doing File to File Scenario
All,
I am trying a simple file to file scenario - where xi picks up the file from a location and maps the message and dumps it in another location.
I am Getting the below error while doing the same .........
Time Stamp Status Description
2009-03-30 14:30:24 Success Channel Test_send_cc: Send binary file "d:\input\input.xml". Size 203 with QoS EO
2009-03-30 14:30:24 Success Application attempting to send an XI message asynchronously using connection AFW.
2009-03-30 14:30:24 Success Trying to put the message into the send queue.
2009-03-30 14:30:24 Success Message successfully put into the queue.
2009-03-30 14:30:24 Success The application sent the message asynchronously using connection AFW. Returning to application.
2009-03-30 14:30:24 Error Attempt to delete file "d:\input\input.xml" after processing failed. Retry
2009-03-30 14:30:24 Success The message was successfully retrieved from the send queue.
2009-03-30 14:30:24 Success The message status set to DLNG.
*+2009-03-30 14:30:24 Error Transmitting the message to endpoint http://filip:8000/sap/xi/engine?type=entry using connection AFW failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Received HTTP response code 401 : Unauthorized.*
2009-03-30 14:30:24 Success The asynchronous message was successfully scheduled to be delivered at Mon Mar 30 14:35:24 GMT+05:30 2009.
And i cant see the meesages using the SXMB_MONI trasaction
please help me resolve ths issue
Regards,
Mahesh.
Edited by: mahesh uma on May 3, 2008 2:12 PMHi Uma,
Go through this links::
Hope these links are useful to you..
Urgent: Message not transmitted from AFW to Integration server
Error with huge file
File to JDBC error
Thanks,
Satya Kumar.. -
Error while doing GR : Deficit of PU GR quantity 5 EA
I am getting the below error while doing the reversal of GR:
Deficit of PU GR quantity 5 EA : <material><plant><pur grp>
Please let me know the solution to rectify it.
Thanks in advance.Hi,
Check the latest goods issue docs for this quantity and cancel that GI doc. This will bring the required stock to enable you cancel the GR. After creating new GR, cancel the "cancelled GI doc" to complete the loop.
or
Increase the stock by doing GR against 501. After new GR, cancel this 501 doc.
or
Post issue return (202) for this quantity. After new GR, cancel this 202 doc.
or
thro' physical inventory, you can add the stock. After new GR, make another PI doc. to set right the stock.
While the first option is a best one, based on your urgency/superior approval, you may opt for other options also.
Regards,
Siva -
Getting error while doing stream setup through OEM
hi all,
I am getting following error while doing stream setup for user stradmin (ORCL) db to stradmin_dest (orcldestination) on same windows m/c.
java.sql.SQLException: ORA-20204: User does not exist: STRADMIN ORA-06512: at "SYSMAN.MGMT_USER", line 122 ORA-06512: at "SYSMAN.MGMT_JOBS", line 139 ORA-06512: at "SYSMAN.MGMT_JOBS", line 78 ORA-06512: at line 1
I provided everything (host credential, usernames for new users and table capture)
its urgent
Help in advancehi,
thanks for reply but DB user exists. It seems to be problem of WIN environment with Streams. I could solve it. But after whole setup and starting Apply and capture capture process goes for hours, not replicated at destination database. Normally how fast is replcation when done for small db like scott on table emp.
thanks -
Error while doing ABGL Asset Credit Memo
Hi Friends,
I am getting the below error while doing Asset Credit Memo in ABGL. Please help me in fix this issue.
Balance for transaction type group 10 negative for the area 01
Note:In Asset Explorer Fiscal year start Asset value is 98,425.45 and Change is 4768.19. So total Asset value as of now is 1,03,193.64.
Now we are trying to do ABGL with 12,790.23 value (Transaction type is 105). System is giving the above highlighted error.
If we give the amount 4768.19 in ABGL transaction, system is not giving any error. If we give more that that system is giving error.
Why system is giving error even the asset has balance of 1,03,193.64? Please help me on this..
Thanks
SunilHi,
If the asset has been capitalized during earlier years, use ABGF to post credit memo. ABGL is meant for assets capitalized during the year.
Best Regards,
Madhu -
Error while doing "Visulaize Plan"
Hi,
Before i did Visualize plan many times without any problem.Now I am getting error while doing so.
I was able to run "Explain Plan" successfully.
I am on HANA revision 60.
I saved above error log and the log information is given below:
I can identify invalid XML tag <TablesInvolved><![CDATA[raj/AN_VIZ]]></TablesInvolved> but how to fix this issue?
I gone through various blogs related to Visulaization Plan but not found related to this issue.
<Plan xmlns="http://www.sap.com/ndb/planviz" ID="ID_0" Type="Estimated">
<SQL><![CDATA[SELECT KOKRS, BELNR, PERIO, SUM(MEGBTR)
FROM "_SYS_BIC"."raj/AN_VIZ"
GROUP BY KOKRS, BELNR, PERIO]]></SQL>
<CompileTime>
<Start Unit="us">1401281467643661</Start>
<End Unit="us">1401281467658329</End>
</CompileTime>
<RootRelation ID="ID_0" TypeName="PROJECT" Status="Finished">
<Name>Project</Name>
<ExecutionType>Row Search</ExecutionType>
<Summary><![CDATA[raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO, SUM(raj/AN_VIZ.MEGBTR)]]></Summary>
<Location>hanasp7:30003</Location>
<EstimatedCost>
<Exclusive Unit="us">2.12902e+06</Exclusive>
<Inclusive Unit="us">2.64021e+06</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<Details><![CDATA[{"Projected Cols":"raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO, SUM(raj/AN_VIZ.MEGBTR)","Project column0":"NString(4, 0) __trex_field_NVarchar3__() ....... [3]:040:<5/7 (16B)>:
/1/ void* \"__rids__\" ....... [0]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [1]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 0 ....... [2]:LOAD:<4/5 (4B)>:","Project column1":"NString(10, 0) __trex_field_NVarchar3__() ....... [8]:040:<5/7 (16B)>:
/1/ void* \"__rids__\" ....... [5]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [6]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 1 ....... [7]:LOAD:<4/5 (4B)>:","Project column2":"NString(3, 0) __trex_field_NVarchar3__() ....... [13]:040:<5/7 (16B)>:
/1/ void* \"__rids__\" ....... [10]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [11]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 2 ....... [12]:LOAD:<4/5 (4B)>:","Project column3":"Decimal(18, 3) __typecast__() ....... [23]:076:<10/12 (16B)>:
/1/ Fixed16(18, 3) __trex_field_Fixed16__() ....... [19]:043:<6/8 (16B)>:
/1/ void* \"__rids__\" ....... [15]:NOP:<0/1 (8B)>:
/2/ int32_t(10, 0) const := 0 ....... [16]:LOAD:<3/4 (4B)>:
/3/ int32_t(10, 0) const := 3 ....... [17]:LOAD:<4/5 (4B)>:
/4/ int32_t(10, 0) const := 3 ....... [18]:LOAD:<5/6 (4B)>:
/2/ int32_t(10, 0) const := 18 ....... [21]:LOAD:<8/9 (4B)>:
/3/ int32_t(10, 0) const := 3 ....... [22]:LOAD:<9/10 (4B)>:"}]]></Details>
<Child ID="ID_8" >
</Child>
</RootRelation>
<Relation ID="ID_8" TypeName="TREX_SEARCH" Status="Finished">
<Name>Column Search</Name>
<ExecutionType>Column Search</ExecutionType>
<Summary><![CDATA[Aggregation on a single table]]></Summary>
<Location>hanasp7:30003</Location>
<EstimatedCost>
<Exclusive Unit="us">511194</Exclusive>
<Inclusive Unit="us">511194</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<TablesInvolved><![CDATA[raj/AN_VIZ]]></TablesInvolved>
<LogicalPlan ID="ID_11" Type="Estimated">
<RootRelation ID="ID_11" TypeName="PROJECT" Status="Finished">
<Name>Project</Name>
<EstimatedCost>
<Exclusive Unit="us">0</Exclusive>
<Inclusive Unit="us">0</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<Child ID="ID_12" >
</Child>
</RootRelation>
<Relation ID="ID_12" TypeName="GROUP_BY" Status="Finished">
<Name>Aggregation</Name>
<Summary><![CDATA[raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO\nSUM(raj/AN_VIZ.MEGBTR)]]></Summary>
<EstimatedCost>
<Exclusive Unit="us">0</Exclusive>
<Inclusive Unit="us">0</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>648284</EstimatedOutputCardinality>
<Details><![CDATA[{"Grouping Cols":"raj/AN_VIZ.KOKRS, raj/AN_VIZ.BELNR, raj/AN_VIZ.PERIO","Aggregation Cols":"SUM(raj/AN_VIZ.MEGBTR)"}]]></Details>
<Child ID="ID_13" >
</Child>
</Relation>
<Relation ID="ID_13" TypeName="TABLE" Status="Finished">
<Name>Column View</Name>
<Schema><![CDATA[_SYS_BIC]]></Schema>
<ObjectName><![CDATA[raj/AN_VIZ]]></ObjectName>
<Location>hanasp7:30003</Location>
<EstimatedCost>
<Exclusive Unit="us">0</Exclusive>
<Inclusive Unit="us">0</Inclusive>
</EstimatedCost>
<EstimatedOutputCardinality>682404</EstimatedOutputCardinality>
</Relation>
</LogicalPlan>
</Relation>
</Plan>
Regards
RajHi,
To solve this you must update your studio. In lower studio versions (PlanViz) does not allow "unknown" XML tags sent by higher version servers. A fix for this issue was made so that PlanViz parser can simply skip unknown tags.
Please go to version 74, if possible.
Regards,
Michael -
Error while doing GR for scheduling aggrement
Dear Experts,
We are facing error while doing GR for scheduling aggrement.
we have done the following steps.
1) Scheduling aggreement in ME31L
2) Released in ME35L
3) Mainatined Sch.Agmt Schdule in ME38 for todays and date 200 qty and other line is 800 qty.
When we are trying to do GR in MIGO system is giving the following message.
Document 5500000152 does not contain any selectable items
can I know what I have missed in the above steps.
Please guide me to resolve this.
Regards,
PrasadHi,
Please check Please check if Gr is already done against this document. Also please check whether you have attached SA in the source list with line items.
T-code:ME01
Enter Mat.code & Plant.
In the next screen pl.do the following:
Valid from - commencement date of the SA
Valid to - End date of the SA
Vendor - Vendor on whom the SA is released
POrg - Your purchase organisation
PPL - Leave it blank(This is only for interplant)
OUn - Ordering unit
Agreement - SA number
Item - 1
I hope this will resolve your issue. Thanking you -
Error While doing ABT1N transaction
Hi,
I am facing the below error while doing ABT1N in Asset Accounting.Please help me in fixing this Issue.
Error Message -No depreciation area for receiving the revenue
Message no.AAPO149
Diagnosis
You tried to post a retirement on asset 1000 100007-0.You entered transaction type 300,in which the retirement with revenue indicator is not set
You tried to transfer asset 1000 100007-0.According to transfer variant 0001,none of the areas on the asset uses a transaction type for retirement with revenue
In both of these cases, you are not allowed to enter revenue or make specifications for the determination of revenue.
Proceedure
Check the transfer variant and check your entry
please do the needful
Thanks
SupriyaHello,
You will have a check box for the same.
Double click on transaction type, you will see the check box for revenue.
Otherwise, tomorrow I will get back to you once I am in front of the system.
Regards,
Ravi
Edited by: Ravi Sankar Venna on May 5, 2009 7:53 PM -
Error while activating DSO after loading from another DSO..Production issue
Hello Gurus,
I got an error while activating DSO2 after loading from another DSO1.
DSO1 load and activation was sucessful but while loading from DSO1 to DSO2 load was fine but got error while activating...
>Error when assigning SID: Action VAL_SID_CONVERT table ZWEEK_NUM
>Value u201809u2019 of characteristic ZWEEK_NUM is not a number with 000004 spaces
this theard was posted after searching for related post in SDN.
and i tried Function Module RSODS_CHECK_RSODSACTUPDTYPE but it is not available .. but I used this in BW 3.10u2026..
is their any similar Function Module in BI 7.0 please advice.
We are using SAP NetWeaver BI 7.0
Release- 700 Service level- 017
Thanks in advance
Sandysloved the issue......
it was due to wrong data for the related field...
it must be "0009 "
Thanks for ur support. closing the ticket
Regards
Sandy -
Error while doing AIAB Settlement
Hi I am facing the below error while doing AIAB during AUC settlement. Please do the needful.
Data for determination of capitalization not managed in area 01
Message no. AW507
Diagnosis
You have chosen a depreciation area, which does not carry the depreciation data from table COEPBR.
Procedure
Choose a different depreciation area.
Thanks
KCHi,
This message could be helpful:
Error AW507
Please check the field T082AVIEWB-AUTHORITY. If it is not on 2 this is the reason.
In this case, you can change the value in T093-VIEW1 using the coding as per SAP note 29706 which you have already discovered. There will be no risk involved in changing this value.
regards Bernhard -
Error while doing AUC Settlement in KO88
Hi
I am getting the below error while doing KO88. I have maintained the Allocation structure for FXA and given the cost element group in the Source field & Given FXA in Receiver category and selected By cost element option aginast Receiver category FXA in Settlement Cost Element field. I am getting the below error while settling in KO88.
Define a settlement cost element for receiver type FXA
Message no. KD506
Diagnosis
In allocation structure A1 (controlling area BP01), you did not define which cost element should be used when settling costs/revenues of the sender. Nor did you define receiver type FXA.
Procedure
Assign a different allocation structure to the settlement sender (-> Master data -> Settlement rule -> Goto -> Settlement parameters), or maintain allocation structure A1.
Please help me
Thanks
KishorePlease check your allocation structure , it looks that settlement cost element that you have assigned in the allocation strcuture is not having correct cost element category.
regards
Ranjan -
Error while doing BAM configuration in JDeveloper
Hi,
I tried to create a connection to my local BAM Server in JDev 10.1.3.2.0 and also in 10.1.3.3, but I always failed! Error messages:
"Server is not set up correctly SOA1"
I'm running on Windows 2003 and installed BAM according to the Installation Guide (version was Bam with Enterprise Link for windows 10.1.3.3.0).
I did not get any error while doing the other setups and can access the different BAM tools via the Oracle BAM Start page, but I can't create a connection in JDev. I used the following parameters:
Host Name: SOA1(system name)
Port Number: 80
User Name: Administrator
Password: <windows domain pwd>
Domain Name: DOMAINNAME
Any help would be highly appreciated.
Regards,
Shailyhi Shaily
It looks like suggesting a different forum is not needed, because you already tried that ...
Error while doing BAM connection in jdeveloper
Error while doing BAM connection in jdeveloper
Error while doing BAM connection in jdeveloper
I hope you get some answers.
success
Jan Vervecken -
Error while doing BAM connection in jdeveloper
Hi,
I tried to create a connection to my local BAM Server in JDev 10.1.3.2.0 and also in 10.1.3.3, but I always failed! Error messages:
"Server is not set up correctly SOA1"
I'm running on Windows 2003 and installed BAM according to the Installation Guide (version was Bam with Enterprise Link for windows 10.1.3.3.0).
I did not get any error while doing the other setups and can access the different BAM tools via the Oracle BAM Start page, but I can't create a connection in JDev. I used the following parameters:
Host Name: SOA1(system name)
Port Number: 80
User Name: Administrator
Password: <windows domain pwd>
Domain Name: DOMAINNAME
Any help would be highly appreciated.
Regards,
Shaily*** Duplicate Posting ***Edited by: damorgan on Oct 6, 2008 11:05 PM
Maybe you are looking for
-
I own both Photoshop Elements and Photoshop (the original editor). I find the elements editor to be too cumbersome to use and would just like to edit using Photoshop. When I try to install Photoshop as a secondary editor in elements I get an error
-
Needs to be configured for Windows... but it already is!
I just bought a brand new 80GB iPod Classic today. I hooked it up to my laptop's USB port, and the first time it showed up in my iTunes directory. Unfortunately iTunes informed that my iPod was corrupted, so I restored it. This happened TWICE. The th
-
The iphone cannot be synced. you do not have enough access privileges for this operation
The iPhone"Kyle's iPhone" cannot be synced. You do not have enought access privileges for this opperation. what do i do?
-
Help with passing CLIENT_KEYSTORE as part of webapp
I've tried out the code at the following URL for accessing a secured webservice. http://e-docs.bea.com/wls/docs81/webserv/security.html#1064460 This code expects the CLIENT_KEYSTORE to be a file on the machine actually running the code. I'm using an
-
IDVD 4.0.1 "unexpectedly quits"
I have a dual 450 Mhz G4 running 10.3.9, 1.3 gig of ram, 30 gig HD w/ about 19gig of free space, an NEC 3520A internal dvd/cd burner. I am attempting to burn the tutorial dvd project within iDVD but i have gotten the "application unexpectedly quits"