Error while doing Transaction data loading from ECC to BW

HI,
I faced error in data records so i corrected it manually by going PSA Maintenance. then now when i am trying to schedule data laod by going to that Data source then right click on Manage then select Request which i have updated with correct records. then Again right click-->UPDATE WITH SCHEDULER .now next screen is SCHEDULER(PSA SUBSQUENT UPDATE) here i am not getting any Data Target means data target field is disabled so i cannot schedule it for load.
Any solution for this error.
Thanks
Nilesh Pathak

Hi,
I guess you have not deleted the request from the InfoCube 'Manage' Screen. If the request is already updated to your InfoCube/ODS ,then it will not show the Data Target in PSA Scheduler.
You can try to re-load the data using 'Only PSA' in the InfoPackage and then correct the errors and load the data using Update option from the Manage screen.
Thanks

Similar Messages

Error while activating DSO after loading from another DSO..Production issue

Hello Gurus,
I got an error while activating DSO2 after loading from another DSO1.
DSO1 load and activation was sucessful but while loading from DSO1 to DSO2 load was fine but got error while activating...
>Error when assigning SID: Action VAL_SID_CONVERT table ZWEEK_NUM
>Value u201809u2019 of characteristic ZWEEK_NUM is not a number with 000004 spaces
this theard was posted after searching for related post in SDN.
and i tried Function Module RSODS_CHECK_RSODSACTUPDTYPE but it is not available .. but I used this in BW 3.10u2026..
is their any similar Function Module in BI 7.0 please advice.
We are using SAP NetWeaver BI 7.0
Release- 700 Service level- 017
Thanks in advance
Sandy

sloved the issue......
it was due to wrong data for the related field...
it must be "0009 "
Thanks for ur support. closing the ticket
Regards
Sandy

Transaction Data Load from BW info provider

Hi gurus,
I am doing a transaction dat aload from the BW data feed to BPC cube. When I did the validation of the transformation file the task was sucessfully completed with some skipped records as expected based on the conversion files.
ValidateRecords = YES
[List of conversion file]
Conversion file: DataManager\ConversionFiles\EXAMPLES\TIMECONV.XLS!CONVERSION
Conversion file: DataManager\ConversionFiles\EXAMPLES\VERSIONCONV.XLS!CONVERSION
Conversion file: DataManager\ConversionFiles\EXAMPLES\ACCOUNTCONV.XLS!CONVERSION
Conversion file: DataManager\ConversionFiles\EXAMPLES\ENTITY.XLS!CONVERSION
Record count: 25
Accept count: 13
Reject count: 0
Skip count: 12
This task has successfully completed
but when did run package, load fails.
/CPMB/MODIFY completed in 0 seconds
/CPMB/INFOPROVIDER_CONVERT completed in 0 seconds
/CPMB/CLEAR completed in 0 seconds
[Selection]
InforProvide=ZPCAOB01
TRANSFORMATION= DATAMANAGER\TRANSFORMATIONFILES\EXAMPLES\ABF_TRANS_LOAD.xls
CLEARDATA= Yes
RUNLOGIC= No
CHECKLCK= No
[Messages]
Task name CONVERT:
No 1 Round:
Error occurs when loading transaction data from other cube
Application: TEST Package status: ERROR
This is a fresh system and we are doing the data load for the first time. we are using BPC NW 7.5 with SP4
Is there something which we are missing which is supposed to be performed before starting the load for the first time.
my transformation file is as below
*MAPPING
Account=0ACCOUNT
Currency=0CURRENCY
DataSrc=*NEWCOL(INPUT)
Entity=ZPCCCPLN
ICP=*NEWCOL(ICP_NONE)
Scenario=0VERSION
Time=0FISCPER
SIGNEDDATA=0AMOUNT
*CONVERSION
TIME=EXAMPLES\TIMECONV.XLS
SCENARIO=EXAMPLES\VERSIONCONV.XLS
ACCOUNT=EXAMPLES\ACCOUNTCONV.XLS
ENTITY=EXAMPLES\entity.xls
Thanks a lot in advance.
Regards
Sharavan

Hi Gersh,
Thanks for the quick response.
I checked in SLG1 and i have the below error in the log.
Class: CL_UJD_TRANSFORM_PROXY:CONSTRUCTOR Log:DATATYPE 3
Class: CL_UJD_TRANSFORM_PROXY:CONSTRUCTOR Log:CURRENT_ROUND 1
Error occurs when loading transaction data from other cube
Message no. UJD_EXCEPTION137
we are on SP4, BPC NW 7.5. Please advice
Regards
Sharavan.

Error while performing Master Data transfer from SAPR/3- ECC5.0 to SCM4.1

Hi all,
Am getting an error while transfering Master data from SAP R/3 system ECC5.0 to SCM4.1 through Core Interface (CIF).
After creating an Integration model and while activating the same am getting the following error,
" System: SCMCLNT800 User: SMART03 06/17/2006 13:32:14
Function: /SAPAPO/CIF_LOC_INBOUND
Text:Error in address data for location DC2000/ECC800 "
Could anyone provide me how to fix this?.
Regards
Bharanidharan

Hi Veera,
Am sorry for the delayed response. Well am using XI as integration engine for transfer of transactional data from R/3 to SCM4.1. I resolved this issue which was because of master data problem. Thanks for your input.
Regards
Bharanidharan

Industry error while doing replication of customer from R/3 to CRM

Hi,
We have production system already implemented and going for roll out for another company both R/3 & CRM.
We have generated conditional objects while doing roll out phase. From then we are getting this error.
Problem:
Customers are not getting replicated to CRM. And in SMW01 the error log says
"Industry 300 not defined for industry system SAPS
Validation error occurred: Module CRM_BUPA_MAIN_VAL, BDoc type BUPA_MAIN."
Since we are going for roll out we have done initial load of all conditional objects
like 'DNL_COND_A002' etc.
After running we did checked in R3AM1 - everything was DONE - in green colour.
But in SLG1 - Display log - there are several entries in Red colour.
Message text says -
"It is not possible to change client-independent Customizing objects
Diagnosis:
Change of client-independent Customizing objects is not permitted in the client in which the transfer of data for table T682 is executed.
System response:
As table T682 contains client-independent Customizing, data transfer is interrupted.
Procedure for System Administration
Provide users with the appropriate authorization to execute data transfer in a client in which changes to client-independent objects is permitted."
Now queues are pilled up with the industry error and don't know how to correct these errors.
Please help.
Regards,
Dhanraj Dange

Hi pankaj,
Step 1:After completing Initial Download tranfer of data takes place from R/3 to CRM system in the form of Customers or employess.
Bulk data will be flown in the first step.
I f there are any errors ,we solve the errors and replicate them manually by using CRMM_BUPA_map.
Step2:There are few customers which are created daily in SAP SD or R/3 and these customers are transfered from R/3 to CRM .
So my question is Is this b'cos of Delta Download or Bcoz of some other Reason.
If so "Is there any specific name for this.
Regards,
divya

Error while activating Transactional data source

I am facing the below error while activating the transactional data source.
Field Revenue ( Position 7 ): Amount Field in Internal Format, Check Settings.
Can nyone plz let me know.

Hi Reddy,
You might have created the Revenue field Currency as "Fixed Currency" like INR or USD.
In the Datasouce Def - Fields tab you have Internal format for a field then you should have the reference field to specify the external format like 0currency.
In your case you have not taken any reference field 0currency. So you should n't specify the revenue field in Internal format,
As Shashank said, Please change it to External format and Activate the DS.
Thanks
Sreekanth.

Error while downloading the object u201CDNL_CUST_PROD0u201D from ECC to CRM

Hi All,
I am trying to download the object u201CDNL_CUST_PROD0u201D from ECC to CRM. However it ended up throwng an error. Below are the error details:
The following Errors/Warnings occured. Do you want to continue?
Please read the OSS Note no. 212666 (QUEUE_ALREADY_EXITS:R3AI_DNL_CUST_PROD0)*
DNL_CUST_PROD0: Object will not be loaded
After getting the above error I deleted the already running instance and again ran it. But when I again ran it, it gave me the same error. So I checked for the entries in Outbound queue of ECC system. But couldnt found any entry.
Please help me fixing the issue.
Thanks in Advance.
Cheers,
Rj

Hello RJ,
Check CRM I /B and O / B (txn:SMQ2 and SMQ1) and also R/3 I /B and O / B queue, for the presence of
R3AI_DNL_CUST_PROD*.
Also, abort the running load in txn:R3AM1 for object DNL_CUST_PROD0.
Then try to re-load the object.
I do not see any other reasons for the above error message.
Best Regards,
Shanthala Kudva.

Error while doing OASV T Code in ECC 6

Can anybody help me how to fix this while doing T Code OASV.
I will assign good points.
Balance in 1 currencies
Message no. F5842
Diagnosis
Balances have been found in 1 currencies with the following details:
Currency type Amount Currency
30 0.01 USD
(A maximum of three differences are listed)
System Response
The prerequisite for posting a document in financial accounting is that the balances for all currency types are zero.
Procedure
This is a system error in the calling application or the FI/CO interface.
Thanx,
Edu

Hye
When you are using multiple currencies this error arrises. You can not transfer the values through OASV.
You have to follow the other way :
first reset the asset reconcilation account.
post the transaction through fb50 or f-02
after posting the entry re-set the reconcilation account.
The path : Assets accounting preparing for production start upset or reset recon account.

Regarding master data ,transactional data loading from flat file

Hi friends,
Please tell me how to load master data and transactional data from flat file ....
Thanks in advance ,
Regards,
ramnaresh.

Hi,
Please use the 'search forum' functionality and search the BI Forum with say 'flat file loading'. You would get plenty of links of previous threads.
BR/
Mathew.

Reagarding Master Data loading from ECC

Hi i want to activate Master Data for Customer and Material from ECC ,Can any one give me the clear steps ,and also i want to know what is the source for these Material And Customer in ECC.

Hi
The datasources are 0CUSTOMER_ATTR and 0MATERIAL_ATTR you can find these in RSA6 if activated under SAP-R/3->LO->LO-IO.
Assign these to 0CUSTOMER and 0MATERIAL infoobjects in BW for a direct update or you can use the following infosources for flexible update
0CUSTOMER_ATTR
0MATERIAL_ATTR
Also use texts datasources 0CUSTOMER_TEXT & 0MATERIAL_TEXT
If the above mentioned datasources are not activated (NOT VISIBLE IN RSA6), use RSA5 transaction code to activate them.
Hope you are familiar with BW and good luck
Regards

Syntax error while doing Convert data in LSMW

Hi experts,
      I am using direct input method for uploading customer master records. After display read data step, when i click Convert data button, i get a runtime error saying that:
      the data object "LEGACY_CUSTOMER_MASTER" has no component called "OLD_CUST_NO", but there is a component called "SAP_CUST_NO".
    But actually we do not need OLD_CUST_NO field, so i did not include it while maintaining source fields. Someone plz help. I urgently need to resolve this.
Thanks.

Hi ,
I think you have declared the filed old_cust_no in the maintain field mapping step may be in global declaration or in the mapping section of hte field. Without the use of filed OLD_CUST_NO you wont get the syntax error. Check the sysntax error in field mapping step and delete the unwanted field.Check the filed mapping section carefully based on the error.
Thanks.

Error while doing multiple object updation from EP ! object lock error

HI all,
I am doing multiple object updation using a standard RFC(BAPI_PROJECT_MAINTAIN). The RFC i am calling from Enterprise portal. I am sending data to RFC one by one. But the error i am getting is object is locked by user so data can't be save.
Though i am using Lock and unlock method before and after calling RFC the project lock error comes up.
What might be the reason
regards
sandeep

Hi Sandeep,
Is the RFC you use for locking in the same model as the bapi BAPI_PROJECT_MAINTAIN? If it is not then you are using two connections for communication with the sap R/3 backend.
You can do 2 things.
1. You could add the RFCs for locking in the same model as the BAPI_PROJECT_MAINTAIN
2. Instead of adding the RFCs in one model synchronize the connections the models use as follows:
IWDDynamicRFCModel model1 = (IWDDynamicRFCModel) WDModelFactory.getModelInstance(Model1.class);
IWDDynamicRFCModel model2 = (IWDDynamicRFCModel) WDModelFactory.getModelInstance(Model2.class);
model1.setConnectionProvider(model2);
You can do this in the wdDoInit. This will make sure both models use the same connection but closing a connection will close both at the same time.
The same problem applies to commit/rollback functionality.
Regards,
Jeschael

Transaction Data Load from Infoprovider Problem?

Hi Dear colleagues;
I have a load transaction from infoprovider data problem. I have transformation file and i prepared our mapping. my transformation file like this:
http://img822.imageshack.us/i/capture1cw.jpg/
Then , run package .The result like this :
http://img291.imageshack.us/i/capture2m.jpg/
and also Package status situation like this :
http://img836.imageshack.us/i/53445642.jpg/
As you see in 3rd picture .. Submit count seems 18525. So i have 18k datas in my BW cube. Lets look Bw side
http://img513.imageshack.us/img513/5760/capture4o.jpg
as you see My BW Cube is empty
http://img137.imageshack.us/img137/6451/capture3dg.jpg
and there is no pack in my BW cube.
I tried to explain my problem in this way.
What should i do in this situation?
Edited by: Breathe_ on Jan 5, 2011 10:34 AM

Thanks for your answer nilanjan. But when i check reject records and reject datas , i couldn't see any hint. Otherwise i want to ask one more question:
my transformation select row like this :
SELECTION=0SALESORG,1000;0SALESORG,2000;0SALESORG,3000
can i write multiple selection about 0SALESORG ? ( EX: 0SALESORG,2000,3000...) are there any syntax about that?
Take it easy...

Error while doing transport to Quality from Solman

Dears,
I am using Solman 7.0 SP15.
I have recently configured Charm,Now to test it funcationality I created one transport and as per process released it by solman.
Now I am trying to import this request by Solman into QAS but it is giving error:
TMS communication error with TMSSUP#QAZ.DOMAIN_DEV
Message no. XT153
Diagnosis
There was an error during communication with the RFC destination
TMSSUP#QAS.DOMAIN_DEV
System Response
The exact error message of the system is:
Name or password is incorrect (repeat logon)
Procedure
The function terminates.
Procedure for System Administration
Check your TMS configuration with the transaction STMS.
I checked all RFCs are working fine with authorization test,RFC TMSSUP#QAZ.DOMAIN_DEV is also working fine but its created with clicked logon screen option that i read is OK.
We have one RFC destination to 000 Client of our domain controller DEV.
Please suggest do i nead to create RFC destnations to QAS and PRD also to import requests or what is the root cause of this issue.
Shivam
Edited by: Shivam Mittal on Jan 22, 2009 9:30 AM

Hi,
TMSSUP#QAZ.DOMAIN_DEV Client 000 ...
Looks like the user who performs action "import to qas" does not exist in QAZ (000).
/cheers

ANT error while doing a setup-bpm from the OBPM documentation - antlib err

Hi,
Have anyone see this particular error and found a solution for the following problem:
I've tried using the samples in OBPM Enterprise version for weblogic. It has samples under OBPMWlHome directory samples/interop.
Setup my environment settings so that the ANT command works for regular java compilations and jar builds.
But, when i try to run the ANT with samples/interop/AntTasks build.xml and setting the properties, getting the following error:
build.xml:58: Problem: failed to create task or type antlib:fuego.tools.ant.enterprise:passport
and when i add the ANT_ARGS=-lib c:/oraHome/lib;c:/oraHome/ext a different error msg is displayed.
org/apache/tools/ant/antlib.xml:37: Could not create task or type of type: componentdef
Would you please give any insight into what can be done to resolve this issue.
Thank you and appreciate any help you can provide.
-Arjen

thank you.. it works..
not sure if this is something, that we need to configure differently in ANT1.81.
Apache site and ANT help messages in ant1.8.1 execute command mentions that this is not a bug..
in any case, appreciate your help on this to use ant 1.6.5
regards

Error while doing Transaction data loading from ECC to BW

Similar Messages

Maybe you are looking for