Error while doing transfer posting

Hi,
While doing transfer posting I am getting an error given below:
"Deficit of SL Bl.stock returns 10 SU : (material) (plant) (stor loc)"
Please help me in this regard.
Thanks in advance.
Sonal

Hi,
Please check once again. There is a deficit of stock in the storage location in the plant. I guess you are mentioning the incorrect s.loc in mb1b.
Also check if there is any return material in the storage loc.
Regards,
satyajit
Edited by: Satyajit Kumar on Dec 23, 2008 11:24 AM
Edited by: Satyajit Kumar on Dec 23, 2008 11:25 AM

Similar Messages

Populate Tax Code in RKWA table while doing transfer posting through MIGO.

Hi All,
I have a requirement where for certain countries i have to pass the tax code to RKWA table while doing Transfer posting through MIGO transaction.
For certain countries which i have to pass the Tax code to RKWA table, basically will not be having the tax code. For this reason im looking for BADi/User exits where i can update the RKWA table with the tax code. If the tax code is not derived, im getting the error as 'No tax information found'.
Please suggest if any BADi/exits are available for this requirement.
Regards,
Santosh

Check the following SAP notes:
139176
579241
Regards,
Indranil

While doing transfer posting in Tcode MIGO,with moment type 413e

I am doing transfer posting with moment type 413 ,E
changing the stock from one sale order to another sale order .
and the material is not related to planning .mrp type ND
I am getting warning messege
"sale order (sobkz= ) is not for this goods moment "
Can any body help me to remove this msg
thanks in advance
Srinivas

when a cost center is created with KS01 transaction, then the user has to enter a validity period.
So this cost center is just not valid for the given date.
Check in KS03 and ask the CO consultant to do the necessary actions

Error while doing consumption posting

Dear all,
There is sufficient amount of quantity for particular batch,but while posting consumption it is showing error.
Error is: Deficit of BA Unrestricted use.
please guide me to solve this issue.
Regards,
santosh.

Dear Santosh,
You are not able to see the radio button that our friends are suggesting because in the configuration at
SPRO-> Logistics - General->Batch Management->Specify Batch Level and Activate Status Management Execute-->Click on Batch Status Management is Inactive
Now coming back to your main problem of error of Deficit........
Pls check that to stock you are looking for is available in correct Plant--Storage Location. And if you are WM managed then in correct bin as well.
Then check the reservations also if the batch is already reserved against something else then also this happens.
And fially check the dates also in the posting document, and check that the same stock - batch combination available in that date.
Even after that if the error remains than pls elaborate your transaction.
Regards,
Shyamal

Error while doing goods posting

Hi,
I am trying to do goods posting in TCode - MB1C
movement type is - 561.
I am getting an error message "Posting is possible only in month 10/2006 or 0000/00".
My current posting period is 10/2006 in Material Master. As well as transaction MMPV shows current period as 10/2006 .
Here is the Exate error message.
Posting only possible in periods 2006/10 and 0000/00 in company code XXXX
Message no. M7053
Diagnosis
The posting date entered is not within one of the permitted posting periods (current period/previous period).
This can be due to one of two reasons:
The correct current period has not been set in the system.
For the system, the first of the entered periods is the current period. At the beginning of a new period, your systems administrator must change the current period in the material master record, using the function "Shift periods". This has not yet been done.
You have entered a wrong date in the field "Posting date".
Procedure
Check the posting date and correct it if necessary. If your input is correct, inform your systems administrator that the "period shifting" (period-end closing) process has not yet been completed. Copied from M8022
Pls Help.
Thanks,
Hardik

HI,
1)simply goto t-code <b>omsy</b> for your plant check the year and period ( month )
for eg: year 2007 and period 5 ( may month)
<b>or</b>
2) by using MMPV and closing the periods one after the other (every month) till the current month.
thnax
sunil jawalkar
Message was edited by:
sunil jawalkar

Error while doing PGR (post goods issue for sales order return)

Hello Gurus,
I'm trying to do PGR for a sales order return. But system shows the following message: "Shortfall below the specified stock level or quantity amounting to 100 UN". (Message number : M7021)
I've made some searches in SD forum but I didn't fnd appropriate answers.
What does it mean ? How can I fix it ?
Thank you,
Bahia.

Hi
"Special Stock E not supported (check your entry)".
This means your sales order (in your case the returns order ) is created with an item category which is marked with special stock indicator E in VOV7 and the system is checking for that special stocks and it is not finding that
When you mark any item category with special stock indicator it can be E or Q or W ( it can be anything ) system will check for that particular stock category and not the general unrestricted stocks
For you mistake can be two things
1. Right now REN or RENN is wrongly marked with special stock indicator E in VOV7
If so remove that and try a fresh cycle
2.The process you are right now doing is returns
The original sale would have happened with special stock indicator E marked in its item category
That means it is special stock
That stock you might be trying to take it into general stocks now
In that case right now you need to mark REN or RENN with special stock indicator E
Note whenever you put your hand in VOV7 create a fresh order cycle and test and dont test it with already created order
Note touching requirement classes are all big things to do in a project and not advisable lot many mistakes we can correct itself if we know order type ,item category and schedule line category
Regards
Raja

Someone can help me here with posting period error in doing GR post in SAP

Hi Seniors,
I've been getting below error while doing GR post. could someone help me to step on further with this error.
"Check table T001B for record type "0", the selected company code, account type S and G/L account 191*** If required, make sure that an entry is made in the table or an interval is changed."
i'm using test system as am a student of SAP MM.
Thank you very much..
Shivakumar

Open and Close Posting Periods
In this activity, you can specify which periods are open for posting for each variant. You have two time intervals (time period 1 and time period 2). In each interval, specify a period lower limit, a period upper limit, and the fiscal year.
You close a period by selecting the period specifications so that the period to be closed does not fall within them.
You can also assign authorization groups for permitted posting periods. This means that in month-end or year-end closing for example, you can open some posting periods for specific users only. The authorization group only has an effect on time period 1. The authorization object is F_BKPF_BUP (Accounting document: Authorizations for posting periods). For more information about assigning authorizations, see the corresponding section for User Maintenance.
Note
Specify G/L account numbers for your specifications. You define the permitted posting periods for the subledger accounting accounts using the relevant reconciliation accounts. To do this, specify the account type for the subledger accounting, such as D or K, and the relevant reconciliation account.
Caution
There must be a minimum entry for each variant. This entry must have + in column K, and the columns From Account and To Account must not contain entries. In the columns for the posting periods, specify the periods you want to always be open in this variant. With further entries, you define more specifically which periods are to be open for which accounts.
Activities
1. Specify the periods permitted for posting.
2. First enter the periods permitted for posting for all variants (minimum entry).
3. Then add entries for account types or account areas if the periods are to be further restricted for specific accounts.
4. In addition, enter an authorization group for each time period 1 in order to limit user access.

Termination error while doing me31k

HI Experts,
This is the sincere apology for the previous thread which was in capital letter subject" termination error while doing me31k
Posted: Mar 6, 2012 2:56 AM
HI while performing transaction ME31K I'm getting follow error
Runtime error: DYNPRO_NOT_FOUND
What Happened?
Error in the ABAP application Program
The current ABAp program "SAPLXM06" had to be terminated because it has come across a statement that unfortunately canont be executed.
Error Analysis
The system attempted to use dynpro 0201 in program "SAPLXM06".
This dynpro does not exist.
Trigger Location of Run TIme Error
Program: SAPLXM06
Include: MM06E00C_CUSTSCR1_HEAD_SET_DAT
ROW: 10
There is a Edit button, that allows you to change the subject
Edited by: Jürgen L. on Mar 6, 2012 8:41 AM

Dear MM user,
Follow the documentation of this enhancement (see transaction SMOD):
Within the documentation of enhancement MM06E005, via TA SMOD, it specifically states that if you use the enhancement you must generate six listed dynpros (screens), even if you are not using them.
So you may goto transaction CMOD and enhance the same.
For example, the dynpro area should be like the following:
Calling screen No. Area Called screen No. ShortTxt
SAPMM06E 0101 CUSTSCR1 SAPLXM06 0101 Subscreen: PO header
SAPMM06E 0111 CUSTSCR1 SAPLXM06 0111 Subscreen: PO item
SAPMM06E 0201 CUSTSCR1 SAPLXM06 0201 Subscreen: agreement
Regards,
ian Wong Loke Foong

Error while doing J1IH (Excise JV) - TR6 Challan posting

I am getting the following error while doing, J1IH (Excise JV) - TR6 Challan posting
Please assist....
Short text
    The COMMIT WORK processing must not be interrupted.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLFACS" had to be terminated because it h
    come across a statement that unfortunately cannot be executed.
What can you do?
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
Error analysis
    During the COMMIT WORK statement, the following are executed:
    - the routines registered with the statement PERFORM .. ON COMMIT,
    - the registered methods for the events of the object services
      and
    - possibly the local update (SET UPDATE TASK LOCAL).
    An exception was raised and caught. The normal sequence of the routines
    was interrupted by this resulting in the program being continued before
    the call of COMMIT WORK. As this can lead to inconsistencies, the
    processing cannot be continued in the normal way.

Thanks Milind...
I am also getting the following error:
Balance in transaction currency
    Message no. F5702
Diagnosis
    A balance has occurred in transaction currency 'INR' with the following
    details:
    Exchange rate '00', amount '       500,000.00' and currency key 'INR'.
    The data in the transaction currency were transferred from the calling
    application.
System Response
    Your data cannot be processed in FI.
Procedure
The error is probably in the calling application.
Please assist

Error while doing Parked document posting in FBV0

Hi,
I am getting the below dump error while doing FBV0 - Parked document posting. Can you please help me to fix this.. I have also maintained FBVB. But still i am facing this.
Thanks
Sunil

Error details missing, like error message no, error text.
Regards,
Gaurav

While doing sample posting in QA32 tansaction below error getting

Hi ....
Recently we have changed the business area from 25 to 11 for all cost centers from 01.04.2014 but unfortunately we didn't change for one cost center now one error is hitting While doing sample posting in QA32.
The account assignment objects are defined for different business areas
Message no. KI196
Diagnosis
You entered several account assignment objects assigned to different business areas. In a posting row all account assignment objects must be assigned to the same business area.
Procedure
Change the account assignment objects if required. The following business areas have been assigned so far:
Business area Type Object
OBJECT_IDENT_GET_OR
ML11 ORD 86000352
If account assignment objects of different business areas are posted to at the same time, whereby the business area of the posting row is derived from the real posting of the CO account assignment object, you can make the error message a caution or a note, or you can deactivate it entirely in Customizing. Use the Implementation Guide under "Controlling: General" and choose Change message control. Enter area KI and message number 196.
Pls give me the solution it's urgent......

Hi,
You can make message KI196 to Warning message. Go To transaction code OBA5 and change this message to Warning instead of Error. Please find below text from the long text information of message KI196.
Regards,
Anand Raichura

Error While doing ABT1N transaction

Hi,
I am facing the below error while doing ABT1N in Asset Accounting.Please help me in fixing this Issue.
Error Message -No depreciation area for receiving the revenue
Message no.AAPO149
Diagnosis
You tried to post a retirement on asset 1000 100007-0.You entered transaction type 300,in which the retirement with revenue indicator is not set
You tried to transfer asset 1000 100007-0.According to transfer variant 0001,none of the areas on the asset uses a transaction type for retirement with revenue
In both of these cases, you are not allowed to enter revenue or make specifications for the determination of revenue.
Proceedure
Check the transfer variant and check your entry
please do the needful
Thanks
Supriya

Hello,
You will have a check box for the same.
Double click on transaction type, you will see the check box for revenue.
Otherwise, tomorrow I will get back to you once I am in front of the system.
Regards,
Ravi
Edited by: Ravi Sankar Venna on May 5, 2009 7:53 PM

Getting the error while doing PGI for depot delivery

Hi
I am getting the below error while doing PGI for Depot delivery. This error is happening only when I taking the materials from stock transfer order which has more than 10 line items. Same issue is not happening when I am taking one material in Stock transfer order in & same material in depot delivery. Please see the screen shots below attachment. I have already maintained no range for the object J_1IDEPINV for year 2014.
Regards
PK

Moved from SAP ERP SD Sales to Internationalization and Unicode. Please post all your CIN related queries here. Also ensure that before posting, you made efforts in searching in SCN or Google. The reason for this indication is the issue you posted has already been discussed many times here and you will get some clue had you searched.
G. Lakshmipathi

Error while doing ABGL Asset Credit Memo

Hi Friends,
I am getting the below error while doing Asset Credit Memo in ABGL. Please help me in fix this issue.
Balance for transaction type group 10 negative for the area 01
Note:In Asset Explorer Fiscal year start Asset value is 98,425.45 and Change is 4768.19. So total Asset value as of now is 1,03,193.64.
Now we are trying to do ABGL with 12,790.23 value (Transaction type is 105). System is giving the above highlighted error.
If we give the amount 4768.19 in ABGL transaction, system is not giving any error. If we give more that that system is giving error.
Why system is giving error even the asset has balance of 1,03,193.64? Please help me on this..
Thanks
Sunil

Hi,
If the asset has been capitalized during earlier years, use ABGF to post credit memo. ABGL is meant for assets capitalized during the year.
Best Regards,
Madhu

Error while trying to post inbound idoc of message type COND_A

Hi,
I am getting error while trying to post inbound idoc of message type COND_A.
If I left Usage & Condition field of segment E1KOMG then 'Table not available' idoc message is coming
and if providing value in above fields then dump is coming.
How to solve ?
Plz do reply
Thanks
Mohit

I do not see any reason why you would need to use COND_A04 if COND_A01 is working.
What if you could get COND_A04 to post and you would face the same result as in COND_A01?
If SAP does not check wrong values, then you have to do it yourself, or you report an incident at SAP (after you have searched for OSS notes that may have fixed this error already)
For example OSS Note 1169998 - IDoc: KONP-LIFNR values not checked
fixed a situation where the vendor number was not validated.

Error while doing transfer posting

Similar Messages

Maybe you are looking for