Error while dong dtp
while doing flat file loading
the data is getting to till PSA very fine by info package
but while doing DTP i am getting error as
' END OF MASTER DATA UPDATE '
kindly help me why its getting error like this
Check the DTP monitor again...there must be detail error message. Also, check the DTP job in SM37, you will get the reason.
Thanks..
Shambhu
Similar Messages
-
Hi gurus,
Iam trying to extract the data from r/3 using generic extractor the data is loaded into PSA sucessfully, but iam getting following errors while executing DTP.
1.An error occurred while executing a transformation rule:
The exact error message is:
The argument 'EA' cannot be interpreted as a number
The error was triggered at the following point in the program
GP4D35STLXQI3SHIVNQC2FSJ7MB 791
2.The data record was filtered out because data records with the same key
have already been filtered out in the current step for other reasons and
the current update is non-commutative (for example, MOVE). This means
that data records cannot be exchanged on the basis of the semantic key.
Please guide me accordingly.
Regards
Amar.Hi
While mapping the Qty Fields it is must to add UOM to the Qty Fields and map it with relevant Info Objects.
The Semantic Keys defined at DTP are also has some issues, try to give a dummy key figure if you are using DSO in the data flow as the DSO has the Overwrite mode.
(Choose Semantic Groups to specify how you want to build the data packages that are read from the source (DataSource or InfoProvider). To do this, define key fields. Data records that have the same key are combined in a single data package. This setting is only relevant for DataStore objects with data fields that are overwritten. This setting also defines the key fields for the error stack. By defining the key for the error stack, you ensure that the data can be updated in the target in the correct order once the incorrect data records have been corrected.)
Hope it helps and clear -
Error while activating DTP in BI 7.0
I am facing an error while activating DTP between a ODS and CUBE.
I have converted 3.x update rules and transfer rules to 7.x transformation. Enhancements were carried out on the data source as well. All the objects and transformations were activated. While activating the DTP between the ODS and CUBE i get an error message saying:
"Creation of PSA /BIC/B0000XXX failed.
Error during creation of DDIC sources of Data Transfer Process DTP_<Request Number>
Error when activating Data Transfer Process DTP_<Request Number>"
I have come across a OSS note, 954574, which is relavent to SP09. But we have SP17 installed on our server.
Any pointers on the same would be of great help.Hi Rupesh,
Chk these links they may help you
http://help.sap.com/saphelp_nw70/helpdata/EN/43/fa2f42e8fc6befe10000000a11466f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/EN/44/03a25c0bbe025ce10000000a1553f7/content.htm
Regards,
RK -
Error while creating DTP from DS to Infoobject
Dear All,
I am getting one error while creating DTP from Datasource to Info object can any one give some suggetion regarding this issue.
Issue:Enter a valid value
Msg No:00002
Procedure: Display the allowed values withF4 and correct your entry,
Regards,
SatyaHi Satya,
Trying logging off the system and log in again and try to activate Data source Infoobject and transformation again and try creating DTP by selecting Selecting the source system by pressing F4. I hope it should work.
I don't find any specific problem or any patch problem with the error you are getting.
Hope it helps !
Regards,
Rose. -
Getting error while running dtp
Hi
i am getting this error while running dtp, i am uisng BI 7.0 write optimized DSO
Duplicate data record detected (DS GMND0002 , data package: 000001 , data record: 4 )
ple let me know ur solutions for this problem,Hi,
You are bound to get this error as write optimized behave in this pattern.
open the write opt DSO and in the settings you can see a check box for 'Do not check uniquness of data'
Check it if you want to use the duplicate records. But there will be two records (duplicate) uniquely identified by the technical key.
Now if you want to use delta concept in this then in DTP use delta by request.
If you further want to use delta then refer to this thread..
[write oprimized dso(URGENT);
Regards,
Priti -
Error while activating DTP : database returned a value containing an error
Hi ,
I am getting an error as "The database returned a value containing an error"
while activating the DTP. Can neone suggest any solution for this error .
The system is also not allowing to delete the DTP and giving the same error as above one .Are you receiving a similar error as below from the log:
Creation of PSA /BIC/B0001995 failed
Error during creation of DDIC sources of Data Transfer Process DTP_4DGGKC0NCCP394FEOOSQC68Y3
If yes then look into SAP Note 1145673 - Extracting from InfoProviders with navigation attributes. Application of this note should resolve the issue. -
Hi Experts,
I create a new key figure on cube, then after this I had a problem when I execute the DTP.
Error while updating to target PS_C08T (type INFOCUBE)
Message number: RSBK241
I need help for this.
Thansk a lot.Hi,
I think you have added the keyfigure in Infocube......... there after you need to activate the transformation and properly map the new target keyfigure with the source keyfigure .... then activate the transformation also activate the DTP as well....... then execute the DTP ......... hopefully it should solve the error....
If not then please provide some more details of the error............
Thanks
Mayank -
TIME LIMIT EXCEEDED ERROR WHILE EXECUTING DTP
Hi gurus,
I Have got an error while executing
The errors are as follows.
1.Time limit exceeded. No return of the split processes
2.Background process BCTL_DK9MC0C2QM5GWRM68I1I99HZL terminated due to missing confirmation
3.Resource error. No batch process available. Process terminated
Note: Iam not executing the DTP as a back ground job.
As it is of higher priority the answers Asap Is appreciated.
Regards
Amar.Hi,
how is it possible to execute a DTP in dialog process. In my mind it is only possible for debugging...
In "Display Data Transfer Process" -> "Goto" -> "Settings for Batch Manger" you can edit settings like Number of Processes or Job Class.
Additional take a look at table RSBATCHPARALLEL and
http://help.sap.com/saphelp_nw04s/helpdata/en/42/f29aa933321a61e10000000a422035/frameset.htm
Regards
Andreas -
Error while running DTP : Exception wrong_fisper
Hi,
I am running an DTP which sends data from standard DSO 0BBP_SC to Cube 0SR_C01. In the ransformation between the two there was a date from DSO which has connections from Calender day of DSO to calender day(ocalday) , week(0calweek) month(0calmonth), quarter(0calquarter), year(0calyear) and Fiscal year/period (0fiscper). While running the DTP then we are getting an error saying Exception wrong_fisper ;.
I debugged it and found that the Constant have not been declared for fiscal year Variant (FISCVARNT). I have declared the values in T009 table. But still its generating the same error. Can anyone help me out reagrding the sameHi Poornima,
THe T009 table should not be maintained manually.
Ask the R/3 people to maintain the required values(initial) in the r/3 system.
After it is done, go to the source system right click and select "Transfer global settings".
Hope this helps,
Sri... -
hi all ,
When I am scheduling DTP one error is coming while monitoring
Named Error in Substep : extraction completed
I am not getting what kind of error it is
Please help meHi Gaurav,
Just check all the data packets in your DTP monitor screen, there you can find Exception error beside to that there will be a error icon, just click on that it will give you entire error message.
Hope this helps.
Rgs,
I.R.K -
Error while Executing DTP for 0ic_c03
Hi Friends,
While executing the 2lis_03_bx DTP for the cube 0ic_c03, i am facing this peculiar problem.
Executing the DTP takes a lot of time and after some time i am getting the error "Status 'Processed with Errors'
Message no. RSBK257"
I have tried with all the three Extraction mode in DTP, but am gettig the same result. i also deleted the DTP and created it again, but am facing the same problem.
Please suggest me with some solutions.
Thanks in advanceHi Friends
Thanks for replying
My colleague told me that in BI 7, its not necessary that we have to load BX datasource. wanted to confirm whether that is true.
And another thing is i Tried to load the datasource 2lis_03_bf, to the PSA but i am facing getting the error message. Transfer structure field not contained in DataSource. Message no. R3037. and "Errors in source system, Message no. RSM340".
Are both the errors related.
what can be the solution for this issue.
Thanks -
Hi,
I am trying to activate a DTP in Q.
But it shows me Error Message no. RSO404 which says that an active version already exists.
But when I see the DTP, the execute option is greyed out and it is inactive.
How do I remove the already active version ?
Is there any function module which can automatically make the previous verions inactive and make the latest version active.
Infact, same error message appears even when I try to create a new DTP and activate it.
Kindly help.I tried to create another full DTP but it showed the same error.
You can create multiple Full DTP's.
You can delete a Full DTP even after loading data with the same.
Jr - can u elaborate that I cant delete a DTP unless the target contents are deleted.
You cannot create multiple Delta DTP's.
Once you load data using a Delta DTP you just cannot delete the Delta DTP as it maintains the delta pointer based on requests. It can only be deleted after deleting all data loaded by it in the target.
Meanwhile, this issue is fixed. Actually one of my teammate was able to activate it at the very first attempt.
Executing an inactive DTP will activate it in the process before the loading job kicks off.
Did you try to activate ? May be you have no auth....did you friend executed it...or may be he has auth.
We are on SP13 as well. -
Hello,
I am running a DTP and getting error 'SYST: Date 13/01/2009 not expected'. After doing analysis of this error, I found that there is data that contain period number 13, which is creating this error. User confirmed that they have made some adjustments entries in period 13 and they need this data in BI also. Is there any way to load this data in BI? in OB29, I checked and found 12 periods and 4 special periods. Please help me in loading this data.
Thanks in advance.
Ajay Ahujareally? that's not what your error message is saying...according to that the format entered is not the one expected by the system...
M. -
Getting error while executing DTP
Hello,
I am learning BI 7.0, am trying load master data from a flatfile to InfoObject. I am getting error when I execute DTP.
I have 15 records in the file. Below are the message that I see in the DTP monitor
- Extraction DataSource ( shows green light)
- Filter out New Records with Same Key ( shows red light) Below are the messages for 15 records
' Record filtered in advance as error records with the same key exist'
Please help me how to resolve this error.I checked my flatfile it looks as following structure
LANG Material Number Mat Desc
E MAT001 text1
E MAT002 text2
E MAT003 text3
I checked the transformations, it shows 'Key' sign against both lang and material number field. I checked the datasource field list and I 'Key' column is not checked. I don't know where key field settings need to be done. According to my understanding combination of Lang and Material Number forms the key then it cannot be duplicate as the material number is different though the lang field is same.
Please advise. Thanks -
SYST: Date 00.00.0000 not expected - error while running DTP.
I had a red alert in a process chain , the message showed TRASFORMATION IS INACTIVE , When I tried after activating DTP manually again gives the same error, atlast I ran the ACTIVE ALL routine again it shows the same message . It also shows SYST: Date 00.00.0000 not expected error.
Can anyone please help me in this issue?This error message is typically associated with trying to populate a field that references 0DATE incorrectly. Check that all of your update routines are syntactically correct and that the data in your source is populated correctly too.
You should be able to see at which line of the generated transformation program that is failing by looking at any short dumps in ST22 or checking the job log in SM37. Place a breakpoint before this point and run through the load in debug mode to analyse if it is a specific data record or it is the update logic that is causing the error.
Regards,
Nick
Maybe you are looking for
-
I have an iphone4 (Verizon) and an iPad (AT&T), and starting this morning, neither one is receiving my mail from Yahoo. I can send an email from Yahoo on both devices, but I can't see any messages. It's clear that both devices know how many messages
-
hi, in my application I am using container and ADF security. Sometimes I get following exception but not always!? What could be the cause? (I added a new role with three members - 1 user and two sub-roles. I configured these sub-roles in web.xml as r
-
Hi All Does anyone having query for excise reports Like RG23 part A 1 and 2 and RG23 Part C 1 and 2 Please send me the query ...... Thanks Ricky
-
Oracle 10.2.0.4 Solaris os version, try to upgrade to version 11.2.0.2.But during the installation, you get an error that there is not enough space .. What issue of the journal ... You need when working up to version 11.2.0.2 from 10.2.0.4 version?
-
Hi I am on Infinity 2 and my HH5 is reporting me as receiving 40.3 Mbps down, this is not what I paid for especially after leaving my 100mb virgin line. When the line was first installed the speed was much higher, I had to have my HH5 replaced due to