Error while downloading custom condition objects(A989)

Hi Friends,
when we try to download custom condition objects(A989), we are getting the below error.
Error Message: At least one field name for the condition table is initial
The condition table for application CRM, usage PR and table number CUS989 contains at least one field with a name that is initial.
we have implemented note Note 514952 - Download of customer-specific tables, but the same issue persists.
we have also generated the report /SAPCND/RV12N001, still we are facing the same issue .
Please suggest..
Best Regards,
Anil.

Hi,
please try first a new initial load of pricing customizing from R/3 to CRM with transaction R3AS:
Download object: DNL_CUST_PRICE
Kind regards
Manfred

Similar Messages

Table is not generated while downloading customizing condition

Hi,
Ive ended the pricing configuration on Dev environment and now Im trying to configure it in CRM Production environment.
Ive created a new object to substitute CND_CUST_CNDALL and I called it ZDNL_CUST_CNDAL.
After create it in Production environment, just like the same object in Dev environment, I realized that even using the exactly same filters, in both objects, in Production environment one access sequence is not created in CRM after the initial download (using trx. R3AS).
In the log(trx. SLG1) I dont have errors, only 4 warnings of Double entry for table /SAPCND/T681E. For details, see long text., which dont seems to be a problem.
Ive tried to download only the access sequence that was missing and it didnt work too, so I analyzed deeply this access sequence and a realized that all tables of the sequence were activated except table CUS818.
In SAP notes 398078 and 314542 Ive found a reference of report /SAPCND/RV12N001 which Ive run for application CRM, Usage PR with check on option Condition tables and supplementary tables. In the log of this report I could see that all tables except CUS818 were generated and no errors were issued.
Im sure that Ive done the same configuration in both environments so I believe that this table should be generated.
This is very important because we need to start ordering from Internet on production environment and the pricing is not working.
What could be the problem of this situation?
Thanks in advance,
Liberto Rodrigues

Hello Liberto,
please have a look at the following note:
514952 Download of customer-specific tables
It describes all the steps you have to carry out in order to download your own tables. Most problems downloading customer tables are due to the steps from that note are not correctly fulfilled.
Please, reward points if it helps you
Regards, José Ignacio

Mapping error while downloading the condition records (ECC to CRM)

Hello Experts,
We were downloading the condition records from ECC to CRM system (Production), but due to Mapping error, it was unsuccessful, i wonder what's going wrong there.
When i see in SMQ2 (CRM Inbound Queue), an queue got stucked there, i.e, R3AD_ZDNL_COND_A930 having SYSFAIL status.
While debugging the queue, I have found that the queue got stuck because of u2018Mapping Erroru2019.
I found inside, Standard code reads the record from table /SAPCND/T681 (Condition Table Structure) for KAPPL = 'CRM', KVEWE = 'PR', KOTABNR = 'CUS930' and AS4LOCAL = u2018Au2019 for which the value of VAKEY_OFFSET is maintained as 0.
If system finds the value of VAKEY_OFFSET is Zero(0) then it will change the download type from D (Delta) to M (Mapping Error) and raise the error & block the Inbound Queue in CRM.
I checked in SMW01alsofor getting some more knowledge about that queue, here the error description:
Structure information for table CNCCRMPRCUS930 not available (Message class: CND_MAP)
Error when carrying out delta download (Message class: CND_MAP)
I am a technical guy and dont have much idea in CRM Middleware.
I welcome your valuable thoughts and will award full points.
Regards,
Jeo

Hi,
As you mentioned i checked for the followings:
>>In Maintain field catalog:
I found only 2-3 fields are maintained here, when i compared with A930 (A930 in ECC system).
>>Create condition tables:
I checked it for CUS930, i found the same but condition table structure name like CNCCRMPRCUS930 are missing. Is that important? Because i see in SMW01, same error is coming over there : Structure information for table CNCCRMPRCUS930 not available .
Please suggest me, now what i need to do?
Regards,
Jeo
Edited by: Jeo Denson on Dec 1, 2011 4:11 PM

Getting error while downloading customer

hi all,
i am getting following error in smq2.
while tranfering custmers.
Function module "/PMPAY/P_CHK_MC" not found.
plz check

Hi Vishesh,
All i can is the FM that you have metioned, i believe it to be custom one(Specific to your project). So, there is not much inputs that anyone can provide here. Ask your technical folks to look after.
Hope it helps!!
Regards,
Josh

Error while downloading DNL_CUST_BASIS3

Hi,
We are encountering the error while downloading Customizing Object
DNL_CUST_BASIS3 from R/3 system to SRM system. Error description reads"
Error in RSQL module of database interface. &INCLU DE
&P9".DNL_CUST_BASIS3 synchronizes units of measure, dimensions, and
currencies.
can any one help me to solve the issue.
Thanks,
Sandeep

Hi,
See if the foll notes help:
Note 1038966 - Entries missing in TCURX after load of DNL_CUST_BASIS3
Note 665077 - Downloading units of measurements (ISO codes etc.)
Note 904229 - Fields in Customizing tables are filled incorrectly
BR,
Disha.
Pls reward points for useful answers.

Object not found ERROR while downloading JAD over OTA

Hellow everybody !
I am getting Error while downloading JAD file over OTA in mobile..
I am putting JAD and JAR in same folder ...
and while I am trying to download JAR file directly then then Error like malformed content
anybody know that when it happens?
Premal

check on your system with giving url on IE whether it open jar or not.

Html error while downloading table entries to Excel.

Hi,
I am getting an error while downloading table entries from webdynpro to excel. After some entries below error script comes and this is not comming all the times.
Is this because of large size?Can anyone please suggest me on this?
Here is the dump:
[code]<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
 <title>Error Report</title>
<style>
td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}
A:link
A:visited
A:active
</style>
</head>
<body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0">
<table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75">
<tr bgcolor="#FFFFFF">
 <td align="left" colspan="2" height="48"> 500 Internal Server Error</td>
</tr>
<tr bgcolor="#3F73A3">
 <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td>
 <td height="23"><img width=1 height=1 border=0 alt=""></td>
 <td align="right" height="23">SAP J2EE Engine/6.40 </td>
</tr>
<tr bgcolor="#9DCDFD">
 <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td>
</tr>
</table>
 
 Application error occurs during processing the request.
<table><tr><td valign="top"> Details:</td><td valign="top"><PRE><pre>com.sap.engine.services.servlets_jsp.server.exceptions.WebIllegalStateException: The stream has already been committed.
 at com.sap.engine.services.servlets_jsp.server.runtime.client.HttpServletResponseFacade.sendError(HttpServletResponseFacade.java:792)
 at com.sap.engine.services.servlets_jsp.server.runtime.client.HttpServletResponseFacade.sendError(HttpServletResponseFacade.java:780)
 at com.sap.engine.services.servlets_jsp.server.runtime.client.HttpServletResponseFacade.sendError(HttpServletResponseFacade.java:768)
 at com.sap.tc.webdynpro.serverimpl.core.url.WebDynproExchangeHandler.responseCachedWebResource(WebDynproExchangeHandler.java:98)
 at com.sap.tc.webdynpro.serverimpl.core.url.WebDynproExchangeHandler.doExchange(WebDynproExchangeHandler.java:189)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doExchangeProcessing(DispatcherServlet.java:164)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:119)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:391)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:265)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
</pre></PRE></td></tr></table>
</body>
</html>[/code]
Thanks,
Sanjeev

Hallo Sanjeev,
How do you exactly "download the table entries from Web Dynpro to Excel?"
I wrote a new Wiki Code Tutorial which demonstrates how to download an Excel file from a Web Dynpro Table UI element on-demand. In this scenario the resource gets re-created on every request. The solution is based on re-initializing the context with a new 0-byte resource object within the calculated context attribute getter method.
See <a href="https://wiki.sdn.sap.com/wiki/display/Snippets/ExportingTableDatainWebDynproJava-SAPNetWeaver04s">Exporting Table Data in Web Dynpro Java - SAP NetWeaver 04s</a>
Regards, Bertram

Error while explicit creating relation object

Hello all ...
i am using forms6i i.e. 'Forms [32 Bit] Version 6.0.8.8.0 (Production)'
on Windows NT.
it is not such a big problem, but ofcource affecting work.
i am modifying a form that has a master block and five child blocks,
while i am trying to create another child block with implicit relation,
it creates block but wizard does not goes to next screen i.e to choose
canvas etc., rather it creates only block and comes to object navigator,
and does not create any relation and hence no associated triggers.
even if i try to create a relation explicitly, it gives error:
'Error while parsing join condition.'
while i am sure the join condition is allright.
when i tried to create a new form with exactly these blocks, it works
fine. the situation is only arising when modifing a form.
if anyone can suggest a solution, i'll be thankful.
regards,
aamir.

Hi Yash,
Check out the below thread:
[activation of the Datastore Object.|error in ODS activation/export datasource;
Hope it helps you!
Please reward points if helpful
Manish

Error while downloading Detroit MI W2 Magnetic media File.

Hello Guys,
We are getting a Run time error while downloading a w2 magnetic media file for MI, and its only for a particular tax company.
Any help is appreciated.
ST22 Dump:
Runtime Errors         CREATE_DATA_ILLEGAL_LENGTH
Exception              CX_SY_CREATE_DATA_ERROR
Date and Time          01/10/2011 13:58:44
Short text
CREATE DATA: Illegal value for the length of an object of the type "X"
What happened?
Error in the ABAP Application Program
The current ABAP program "RPCTRTU0_ALV" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CREATE_DATA_ERROR', was not
caught in
procedure "DOWNLOAD_CTXFU0" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
A data object of the type "X" with length 0 was to be created using
CREATE DATA. The value 0 is not within the allowed range.
Allowed range for the length specification:
Typ C, N, X: 1 .. 65535
TYP P:       1 .. 16
Thanks,
Krish

Hello Mr. Krish,
I believe that this error has been corrected because you had to send the W2 form .
But this issue was caused due to the fact that your file HR_F_W2_TAPE_DEC does not have a header line. The note 1553756 was delivered to correct this dump.
Best Regards,
Jaime

Error while download HR integrator having parameter

We created HR integrator and then selected Standalone_Integrator_Queries for assigning parameters which are following.
Example:
Integrator Name - CUSTOM TEST People3 INTG
SQL Where Clause – WHERE EFFECTIVE_DATE = '31-DEC-4712' AND EMPLOYEE_NUMBER = $PARAM$.EMPLOYEE_NUMBER
1st Parameter Name – EMPLOYEE_NUMBER
1st Parameter Type – Varchar2
1st Parameter Prompt– EMPLOYEE_NUMBER
Below error while download file for particular employee.
SQL error: ORA-00904: "EFFECTIVE_DATE": invalid identifier occurred processing stored SQL for Content 800:GENERAL_362_CNT.
Download parameters are not complete
Secondly, now if remove effective parameter coditions and reload the same then layout taking twice input for the employee field, is there any table which is configured parameter with integrator
thanks

Dear
I have incorporated both option as you suggested but still there is not getting all employee when pass blank employee number at the time of Parameter.
if this is working try to evolve it into something like:
SQL Where Clause – WHERE (EMPLOYEE_NUMBER = $PARAM$.MY_EMPLOYEE_NUMBER or $PARAM$.MY_EMPLOYEE_NUMBER is null)
SQL Where Clause – WHERE (EMPLOYEE_NUMBER = nvl($PARAM$.MY_EMPLOYEE_NUMBER, EMPLOYEE_NUMBER)
Secondly user ("936671") suggested to use where_clause in such manner but this where system doesn't accespt due to (:PER) SHORT NAME.
should i apply patch for this or need to change some profiles setting.
thanks

Error while downloading the DNL_CUST_PROD1

Dear Experts
I am establishing middleware connection between CRM 6.0 and ECC 6.0
I am getting errors while downloading the DNL_CUST_PROD1.
I am getting   sysfail in crm inbound queue(smq2) with error saying
"   Immport of material type into hierarchy YBPCRMPROD not possible "
Could you help me in resolving this error.
Thanks & Regards
V.Srinivas

Hi Arup
Initially CRM system is a standalone in that we configured the best practises to make it as a BUSINESS ALL IN ONE while doing this we have defined hierarchy YBPCRMPROD in CRM and created products, now we are trying to establish the middleware connectivity between CRM and the ECC while doing this i am getting above error.
When i check the Hierarchy in CRM with the tcode COMM_HIERARCHY i am able to see the following
1)R3MATCLASS        MATERIAL GROUP
2)R3PRODHIER          PRODUCT HIERARCHY
3)YBPCRMPROD        BEST PRACTISES PRODUCT HIERARCHY
When i am trying to see assigned heirarchies to the apllication i am able to see the following using the tcode COMM_PRAPPLCAT
application                       HIERARCHY
sales                               R3PRODHIER
purchasing                     R3MATCLASS
product                           YBPCRMPROD
internet customer           YBPCRMPROD
When i press f4 on the hierarchiesid i am able to see the following.
1)R3MATCLASS        MATERIAL GROUP
2)R3PRODHIER          PRODUCT HIERARCHY
3)YBPCRMPROD       BEST PRACTISES PRODUCT HIERARCHY
I know that we can delete the hierarchy in the CRM by running a program which deletes hierarchies in the crm , but we canu2019t delete the hierarchy which is created in the CRM system without deleting the hierarchy how can i resolve this issue.
please help me in resolving this issue.
Thanks & Regards
V.Srinivas

Error while downloading. message on E71 GPS USA Ma...

“Error while downloading” message on E71 with updated GPS USA Maps
I’m sure I’m not the only one having this problem but I recently updated my maps on my Straight Talk Nokia E71. The phone says I have map download V 3.03 10wk bo4 Mw Open GL LM MN, Map version 0.1.25.114.and I’m using Nokia Ovi Suite 2.2.1.23. After I installed V3.03, I installed it and download the 1.46GB USA map file and the three turn by turn files. But when I first started the GPS app I started getting the following error “Error while downloading”(This is on phone only)
I have tried to factory reset the phone, re-format the 8GB memory card, remove City data and GF files and even unloaded OVI Suite and reload it. But every time I select GPS app and start to find places or my position, I get "Error while downloading" message. I’m new to this phone and didn’t get a respectable book from Straight Talk. So I don’t know much about this phone or Nokia OS. What is this error and how do I fix it. Also when I try to sync from the phone I get the response "system error". Ovi suite on the PC says I have downloaded all the USA maps and English voice with street names. Please help I’m at a lost.
Computer specs
I am running Win-Vista, with a Broadband connection. 3 GB Ram, 2 gig Pentium dual core.
Tran’s flash card has plenty room left on card over 5 gigs left.
If I need to delete a file on the phone please tell me the exact file name because I’m not sure which one to remove from the apps folder.
Solved!
Go to Solution.

@Action_Jackson
Welcome to the forum!
Whilst easy for me to say as keep very little data on device, I would suggest backup essential data then delete E:\cities + ,qf file followed by resetting device to "Out of box" state by keying in #7370# then 12345 (default Nokia lock code unless altered by yourself). At this point you would need to open OVI Maps application on device to re-initialise application and re-define necessary folder structure on memory card for device to be recognised by OVI Suite > Maps to re-download your regional mapping.
Happy to have helped forum with a Support Ratio = 42.5

Error while running custom BI report in R12.1.1

Hi All,
We are encountering below error while running custom BI report in R12.1.1...
Forcing NLS_NUMERIC_CHARACTERS to: '.,' for XDO processing
APPLLCSP Environment Variable set to :
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
Enter Password:
MSG-00001: started report
REP-1401: '': Fatal PL/SQL error occurred.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: '': Fatal PL/SQL error occurred.
Report Builder: Release 10.1.2.3.0 - Production on Fri Jun 24 16:47:30 2011
Please let us know how to fix this error.
Thanks
Praveen

Hi Praveen,
Seems the issue is with the rdf. Check whether all the parameters are passed correctly.
REP-1401: '': Fatal PL/SQL error occurred.

Error While downloading the file A server Error has occurred, please try again later Downloading Yahoo mail Application Attachments Trying to download My Photos and movie 3 items so i can delete them all

I have icloud and a new iPhone5 ! They work good , took pictures and a few short movies, plugged in my phone to my iMac transfered Items to iPhoto then inported items to iMovie. when getting to know what i was doing i decided to delete pictures and movies i no longer wanted. when i looked for a few missing items i opend Finder and there some where buyt i had already trashed them and deleted the doubles. Still could not find missing pictures and movies 3 items and today after calling yahoo about a different complant with sending feed back for Yahoo mail Applications login . i opened up Attachments Not the Large Attachments just Attachments and there were the 3 items i had been hunting for to Trash and delete. the mail Attachments file does not have the Option to delet Files and photos and movies. When i tried to Download the 3 items a window shows up that says Error While Downloading the Files, A Server Error has occured, please Try Again later. nothing works how do i remove the Trapped photo and movie Blank Files and trash them? Onece they get into my downloads i can do something with them as i understand. That part of it kind of keeps me in Question also because why should i have to down load my own files of Attachments / Pictures and movies if they are comming from my iMac? How much better is iLife11 then iPhoto08 and iMovie08 . Thanks Greg

Hello,
Thank you for your post.
This is a quick note to let you know that we are performing research on this issue.
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Error while creating Vacancy requisition object (NB) after upgrading EHP4

Hi All,
We had alreay E-Rec system with EHP2 and using last 1 year. Now based on Client requirement, we have upgrdaed to EHP4. After completing EHP4 upgradation, we are getting error while creating vacancy requisition object after all level of approval.
Can any body help how to resolve this issue?
Thanks in advance.
Regards,
Sreelatha

Hi
Hope SAP Note 1241014 will be useful to you.
Best Regards
Reddy

Error while downloading custom condition objects(A989)

Similar Messages

Maybe you are looking for