Error while downloading large application

Hi,
This is little strange.
1) I am having problems while downloading the MAU 3.0 application alone to my device. The error is : Error downloading application from "...<link>..."
Can anyone explain. Can there be any other issue apart from connection timeout? is there any workaround for this?
While other applications(like sample apps & MSA HH) are correctly downloading.
The deployment in 7.0 and assigning to device are all fine.but the status of the MAU is "deployment activated".
Regards
Divya

I now re-installed MWDS again, and it gave same error. I am pasting the log file here
Normal Log
12:28:00 SapFeiKr 2   Falling back to out of process self registration ( sapregsv.exe )
Error in Red
12:28:01 SapFeiKr 2E Out of process self registration failed: The specified procedure could not be found.   Error code 0x7f (127)
12:28:02 SapFeiKr 2E The module C:\WINDOWS\system32\librfc32.dll could not be loaded due to unresolved module dependencies:
12:28:02 SapFeiKr 2E Module msvcr80.dll is unresolved
12:28:02 SapFeiKr 2E COM server registration failed. Reboot required: The specified procedure could not be found.   Error code 0x7f (127)
Warning in Blue
12:28:02 SapFeiSv 2W Cannot register 'C:\WINDOWS\system32\librfc32.dll', but no reboot is pending --> ignored
Any Clue???

Similar Messages

Error While downloading the file A server Error has occurred, please try again later Downloading Yahoo mail Application Attachments Trying to download My Photos and movie 3 items so i can delete them all

I have icloud and a new iPhone5 ! They work good , took pictures and a few short movies, plugged in my phone to my iMac transfered Items to iPhoto then inported items to iMovie. when getting to know what i was doing i decided to delete pictures and movies i no longer wanted. when i looked for a few missing items i opend Finder and there some where buyt i had already trashed them and deleted the doubles. Still could not find missing pictures and movies 3 items and today after calling yahoo about a different complant with sending feed back for Yahoo mail Applications login . i opened up Attachments Not the Large Attachments just Attachments and there were the 3 items i had been hunting for to Trash and delete. the mail Attachments file does not have the Option to delet Files and photos and movies. When i tried to Download the 3 items a window shows up that says Error While Downloading the Files, A Server Error has occured, please Try Again later. nothing works how do i remove the Trapped photo and movie Blank Files and trash them? Onece they get into my downloads i can do something with them as i understand. That part of it kind of keeps me in Question also because why should i have to down load my own files of Attachments / Pictures and movies if they are comming from my iMac? How much better is iLife11 then iPhoto08 and iMovie08 . Thanks Greg

Hello,
Thank you for your post.
This is a quick note to let you know that we are performing research on this issue.
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

Html error while downloading table entries to Excel.

Hi,
I am getting an error while downloading table entries from webdynpro to excel. After some entries below error script comes and this is not comming all the times.
Is this because of large size?Can anyone please suggest me on this?
Here is the dump:
[code]<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<html>
<head>
 <title>Error Report</title>
<style>
td {font-family : Arial, Tahoma, Helvetica, sans-serif; font-size : 14px;}
A:link
A:visited
A:active
</style>
</head>
<body marginwidth="0" marginheight="0" leftmargin="0" topmargin="0" rightmargin="0">
<table width="100%" cellspacing="0" cellpadding="0" border="0" align="left" height="75">
<tr bgcolor="#FFFFFF">
 <td align="left" colspan="2" height="48"> 500 Internal Server Error</td>
</tr>
<tr bgcolor="#3F73A3">
 <td height="23" width="84"><img width=1 height=1 border=0 alt=""></td>
 <td height="23"><img width=1 height=1 border=0 alt=""></td>
 <td align="right" height="23">SAP J2EE Engine/6.40 </td>
</tr>
<tr bgcolor="#9DCDFD">
 <td height="4" colspan="3"><img width=1 height=1 border=0 alt=""></td>
</tr>
</table>
 
 Application error occurs during processing the request.
<table><tr><td valign="top"> Details:</td><td valign="top"><PRE><pre>com.sap.engine.services.servlets_jsp.server.exceptions.WebIllegalStateException: The stream has already been committed.
 at com.sap.engine.services.servlets_jsp.server.runtime.client.HttpServletResponseFacade.sendError(HttpServletResponseFacade.java:792)
 at com.sap.engine.services.servlets_jsp.server.runtime.client.HttpServletResponseFacade.sendError(HttpServletResponseFacade.java:780)
 at com.sap.engine.services.servlets_jsp.server.runtime.client.HttpServletResponseFacade.sendError(HttpServletResponseFacade.java:768)
 at com.sap.tc.webdynpro.serverimpl.core.url.WebDynproExchangeHandler.responseCachedWebResource(WebDynproExchangeHandler.java:98)
 at com.sap.tc.webdynpro.serverimpl.core.url.WebDynproExchangeHandler.doExchange(WebDynproExchangeHandler.java:189)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doExchangeProcessing(DispatcherServlet.java:164)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:119)
 at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doGet(DispatcherServlet.java:48)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:391)
 at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:265)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:345)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:323)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:865)
 at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:240)
 at com.sap.engine.services.httpserver.server.Client.handle(Client.java:92)
 at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:148)
 at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:37)
 at com.sap.engine.core.cluster.impl6.session.UnorderedChannel$MessageRunner.run(UnorderedChannel.java:71)
 at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
 at java.security.AccessController.doPrivileged(Native Method)
 at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:94)
 at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:162)
</pre></PRE></td></tr></table>
</body>
</html>[/code]
Thanks,
Sanjeev

Hallo Sanjeev,
How do you exactly "download the table entries from Web Dynpro to Excel?"
I wrote a new Wiki Code Tutorial which demonstrates how to download an Excel file from a Web Dynpro Table UI element on-demand. In this scenario the resource gets re-created on every request. The solution is based on re-initializing the context with a new 0-byte resource object within the calculated context attribute getter method.
See <a href="https://wiki.sdn.sap.com/wiki/display/Snippets/ExportingTableDatainWebDynproJava-SAPNetWeaver04s">Exporting Table Data in Web Dynpro Java - SAP NetWeaver 04s</a>
Regards, Bertram

Error while downloading. message on E71 GPS USA Ma...

“Error while downloading” message on E71 with updated GPS USA Maps
I’m sure I’m not the only one having this problem but I recently updated my maps on my Straight Talk Nokia E71. The phone says I have map download V 3.03 10wk bo4 Mw Open GL LM MN, Map version 0.1.25.114.and I’m using Nokia Ovi Suite 2.2.1.23. After I installed V3.03, I installed it and download the 1.46GB USA map file and the three turn by turn files. But when I first started the GPS app I started getting the following error “Error while downloading”(This is on phone only)
I have tried to factory reset the phone, re-format the 8GB memory card, remove City data and GF files and even unloaded OVI Suite and reload it. But every time I select GPS app and start to find places or my position, I get "Error while downloading" message. I’m new to this phone and didn’t get a respectable book from Straight Talk. So I don’t know much about this phone or Nokia OS. What is this error and how do I fix it. Also when I try to sync from the phone I get the response "system error". Ovi suite on the PC says I have downloaded all the USA maps and English voice with street names. Please help I’m at a lost.
Computer specs
I am running Win-Vista, with a Broadband connection. 3 GB Ram, 2 gig Pentium dual core.
Tran’s flash card has plenty room left on card over 5 gigs left.
If I need to delete a file on the phone please tell me the exact file name because I’m not sure which one to remove from the apps folder.
Solved!
Go to Solution.

@Action_Jackson
Welcome to the forum!
Whilst easy for me to say as keep very little data on device, I would suggest backup essential data then delete E:\cities + ,qf file followed by resetting device to "Out of box" state by keying in #7370# then 12345 (default Nokia lock code unless altered by yourself). At this point you would need to open OVI Maps application on device to re-initialise application and re-define necessary folder structure on memory card for device to be recognised by OVI Suite > Maps to re-download your regional mapping.
Happy to have helped forum with a Support Ratio = 42.5

Error while downloading data into excel file.

Hi,
    I have a requirement to download data available in xstring to excel file.
I have a RFC which has export parameter 'file_data' of type xstring. When i call RFC
from web dynpro abap application it gives data out pout in xstring format.
I am opening excel file using that xstring data as below
cl_wd_runtime_services=>attach_file_to_response(
i_filename = 'file.xls'
i_content = ls_data_source-data_source   ***[xstring data from RFC]
i_mime_type = 'x-excel/application'
i_in_new_window = abap_true ).
But excel file not coming in correct format. its giving an error while download
excel file
Error is
      " the file you are trying to open , 'file[1].xls', is in a different format than
specified by the file extension. Verify that the file is not corrupted and is from
a trusted source before opening the file. Do you want to open the file now? "
If i click on 'YES' button file opening but not in proper excel format. Data is coming
in tab delimiter format in excel file.
Please suggest any solution for this problem.
Thanks,
Venkat.

Hi Thomas,
Following is the logic implemented in RFC which is giving XSTRING as export parameter
STEP1      create a dynamic internal table
           Create field catalog for the table   using LVC_FIELDCATALOG_MERGE
               CALL METHOD cl_alv_table_create=>create_dynamic_table
                    EXPORTING
                       it_fieldcatalog = it_fieldcat
                     IMPORTING
                       ep_table        = dyn_table.
              CREATE EXCEL SHEET BY SENDING FIELD CATALOG AND DATA TAB
STEP2 # Convert text table to xstring.
        CALL FUNCTION 'SCMS_TEXT_TO_XSTRING'
          IMPORTING
            buffer   = l_content
          TABLES
            text_tab = lt_data_tab
          EXCEPTIONS
            failed   = 1
            OTHERS   = 2.
STEP3 *# Psss Data to Netweaver
          PERFORM pass_data_to_nw USING is_import
                                  CHANGING es_attachment_metadata.

Error while downloading Detroit MI W2 Magnetic media File.

Hello Guys,
We are getting a Run time error while downloading a w2 magnetic media file for MI, and its only for a particular tax company.
Any help is appreciated.
ST22 Dump:
Runtime Errors         CREATE_DATA_ILLEGAL_LENGTH
Exception              CX_SY_CREATE_DATA_ERROR
Date and Time          01/10/2011 13:58:44
Short text
CREATE DATA: Illegal value for the length of an object of the type "X"
What happened?
Error in the ABAP Application Program
The current ABAP program "RPCTRTU0_ALV" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CREATE_DATA_ERROR', was not
caught in
procedure "DOWNLOAD_CTXFU0" "(FORM)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
A data object of the type "X" with length 0 was to be created using
CREATE DATA. The value 0 is not within the allowed range.
Allowed range for the length specification:
Typ C, N, X: 1 .. 65535
TYP P:       1 .. 16
Thanks,
Krish

Hello Mr. Krish,
I believe that this error has been corrected because you had to send the W2 form .
But this issue was caused due to the fact that your file HR_F_W2_TAPE_DEC does not have a header line. The note 1553756 was delivered to correct this dump.
Best Regards,
Jaime

Error while downloading ADOBE LifyCycle Designer

Hi Professional,
I'm facing error, while downloading "ADOBE LifeCycle Designer 8.0" from Marketplace through "SAP Download Manager".
Error is: "Unable to read data from the SAP Service Marketplace. Check your services and try again", This error shows in the taskbar.
What will be the possible reason for this error?
Thanks
Devinder

Hi,
You can download the same from service market place. Go to http://service.sap.com/swdc
Choose Download->Installation and Upgrades->My Company's Application Components-> SAP NETWEAVER-> SAP NETWEAVER 7.0->Installation and Upgrades
Choose which ever is your OS and DB and under download tabs click on 50098620_1 NW 7.0 Presentation - Adobe LiveCycle Designer 8.0 which will ask you to download directly and save.
Regards,
Sharath

Error while downloading Itunes! Cant download AAS!

I keep getting this error, while downloading Itunes.
There is a problem with this windows installer package.
A program required for this install to completecould not be run.
contact your support personnel or package vendor.
Ive been searching for a solution, and figured out that its the Apple Application Support that cant download.
Does anyone have a clue how to fix this?
I just bought a new ipod touch, and im itching to use it.

Good day TanCher23,
If you are having an issue with installing the update for iTunes for Windows, I would suggest that you troubleshoot using the steps in this article -
If you can't install or update iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Safe computing,
Brett L

Error while downloading the DNL_CUST_PROD1

Dear Experts
I am establishing middleware connection between CRM 6.0 and ECC 6.0
I am getting errors while downloading the DNL_CUST_PROD1.
I am getting   sysfail in crm inbound queue(smq2) with error saying
"   Immport of material type into hierarchy YBPCRMPROD not possible "
Could you help me in resolving this error.
Thanks & Regards
V.Srinivas

Hi Arup
Initially CRM system is a standalone in that we configured the best practises to make it as a BUSINESS ALL IN ONE while doing this we have defined hierarchy YBPCRMPROD in CRM and created products, now we are trying to establish the middleware connectivity between CRM and the ECC while doing this i am getting above error.
When i check the Hierarchy in CRM with the tcode COMM_HIERARCHY i am able to see the following
1)R3MATCLASS        MATERIAL GROUP
2)R3PRODHIER          PRODUCT HIERARCHY
3)YBPCRMPROD        BEST PRACTISES PRODUCT HIERARCHY
When i am trying to see assigned heirarchies to the apllication i am able to see the following using the tcode COMM_PRAPPLCAT
application                       HIERARCHY
sales                               R3PRODHIER
purchasing                     R3MATCLASS
product                           YBPCRMPROD
internet customer           YBPCRMPROD
When i press f4 on the hierarchiesid i am able to see the following.
1)R3MATCLASS        MATERIAL GROUP
2)R3PRODHIER          PRODUCT HIERARCHY
3)YBPCRMPROD       BEST PRACTISES PRODUCT HIERARCHY
I know that we can delete the hierarchy in the CRM by running a program which deletes hierarchies in the crm , but we canu2019t delete the hierarchy which is created in the CRM system without deleting the hierarchy how can i resolve this issue.
please help me in resolving this issue.
Thanks & Regards
V.Srinivas

Troubleshootings while building large application

Hello,
I am currently trying to build a large application :
- ~6000 vis,
- ~300 or 400 classes,
I am quite proud of the code, because there is only 1 vi not packaged in a lib or 1 class, it's the Main_App.vi that launches the application.
Architecture is based on Model View Presenter design pattern.
When I try to build the application Labview just process for hours and don't even moves.
Last night, I let him go for 10 hours and it and just processed 1 class.
I tried using Libp to package part of the code but with no success, a lot of linkage troubles occurs when I try to use them. And management of redefinition seems to broke Vis.
As any body encounters that king of situation and even solved it.
Any Ideas...
The software have to be delivered within a week and it makes me sick not to be able to make usable to work we have done for months....
Thanx for answers.
Pierre
Coss-post : http://lavag.org/topic/15004-troubleshootings-while-building-large-application/

Hi,
Please have a look at this thread,
Re: Error in CompatibilityMode
Regards,
Saravanan K

Error while running web application through JDEV (10.1.3.0.3) in OC4J

Error while running web application through JDEV (10.1.3.0.3) in OC4J.
Here is the error message.
07/10/02 14:45:28 Exception in thread "OC4J Launcher" oracle.classloader.util.AnnotatedNoClassDefFoundError:
 Missing class: javax.xml.bind.JAXBContext
 Dependent class: com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl
 Loader: oc4j:10.1.3
 Code-Source: /C:/jdev/j2ee/home/lib/oc4j-internal.jar
 Configuration: <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar
The missing class is not available from any code-source or loader in the server.
07/10/02 14:45:28 at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClassLoader.java:2073) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
 at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLoader.java:1681) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
 at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1633) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
 at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.java:1618) [C:/jdev/j2ee/home/lib/pcl.jar (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@7]
 at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:319) [jre bootstrap, by jre.bootstrap]
 at com.oracle.corba.ee.impl.orb.config.InternalSettingsORBConfigImpl.init (InternalSettingsORBConfigImpl.java:46) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
 at com.oracle.corba.ee.impl.orb.config.SunRIORBConfigImpl.init (SunRIORBConfigImpl.java:97) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
 at com.oracle.iiop.server.IIOPServerExtensionProvider.configureOrb (IIOPServerExtensionProvider.java:26) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
 at com.oracle.corba.ee.impl.orb.ORBServerExtensionProviderImpl.preInitApplicationServer (ORBServerExtensionProviderImpl.java:45) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
 at com.evermind.server.ApplicationServer.serverExtensionPreInit (ApplicationServer.java:1031) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
 at com.evermind.server.ApplicationServer.setConfig (ApplicationServer.java:861) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
 at com.evermind.server.ApplicationServerLauncher.run (ApplicationServerLauncher.java:98) [C:/jdev/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xml in C:\jdev\j2ee\home\oc4j.jar), by oc4j:10.1.3]
 at java.lang.Thread.run (Thread.java:595) [jre bootstrap, by jre.bootstrap]

Hi,
The guide you were refering was pointing to 10.1.2 wizards.
For the latest 10.1.3 tutorial, please follow the below tutorial link :
http://www.oracle.com/technology/products/jdev/101/tutorials/WS/WSandAScontrol.htm
Hope this helps,
Sunil..

Getting error while running page application page developed in Jdev ADF

Hi,
i m facing this error while running page application page developed in Jdev ADF
can anybody help??
JBO-30003: The application pool (model.ChakDeTrackersLocal) failed to checkout an application module due to the following exception:oracle.jbo.JboException: JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-29000: Unexpected exception caught: oracle.jbo.JboException, msg=JBO-25222: Unable to create application module.

Hi,
try to test JDBC connection used by AM if it is ok
regards,
Branislav

Error while deploying my application

Hi,
I am getting the following error while deploying my application.
com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'password' missing
 at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:457)
 at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1015)
 at com.sap.mw.jco.JCO$Client.connect(JCO.java:3255)
 at com.sap.dictionary.runtime.mdi.DataProvider.<init>(DataProvider.java:91)
at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:319)
 at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:687)
 at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:238)
 at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671)
 at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674)
 at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40)
 at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199)
 at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430)
Thanks ,
nadh

Hi Nadh,
This is the code to execute RFCst
Z_Notification_Create_Input input = new Z_Notification_Create_Input();
wdContext.nodeZ_Notification_Create_Input().bind(input);
wdContext.currentZ_Notification_Create_InputElement().modelObject().addFlines(longText);
wdContext.currentZ_Notification_Create_InputElement().modelObject().execute();
Best regards,
Chinnu

HT5642 Unable to download app this time error while downloading app please help!!!

when i download some app from apps store i get the following error
"Unable to download app this time error while downloading app" please help!!!
i ve tried these Things but
didnt workout yet
1) i tried hard reset
2)i tried logout/login Itune & appstore
3)Connected to pc and rest setting Network and Full Rest
all of no use... i dont want to update my softwre from IOS 6.0
Plx help!1

Hey Prahaladvatsan,
Thanks for the question. If I understand correctly, there is a blank app icon on the home screen. It looks like you have already done some troubleshooting. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario

Error while executing the application

Hi Friends,
I am getting error while executing the application.The error is
"javax.ejb.EJBException: Transaction aborted; nested exception is: javax.transaction.RollbackException: Transaction marked for rollback."
Can anybody help me..
Thanks in advance.

You need to step through a debugger and find the source of your problem as something is clearly going wrong and causing the transaction to roll back. That is all that message tells us.
m

Error while downloading large application

Similar Messages

Maybe you are looking for