Error while downloading the object u201CDNL_CUST_PROD0u201D from ECC to CRM

Hi All,
I am trying to download the object u201CDNL_CUST_PROD0u201D from ECC to CRM. However it ended up throwng an error. Below are the error details:
The following Errors/Warnings occured. Do you want to continue?
Please read the OSS Note no. 212666 (QUEUE_ALREADY_EXITS:R3AI_DNL_CUST_PROD0)*
DNL_CUST_PROD0: Object will not be loaded
After getting the above error I deleted the already running instance and again ran it. But when I again ran it, it gave me the same error. So I checked for the entries in Outbound queue of ECC system. But couldnt found any entry.
Please help me fixing the issue.
Thanks in Advance.
Cheers,
Rj

Hello RJ,
Check CRM I /B and O / B (txn:SMQ2 and SMQ1) and also R/3 I /B and O / B queue, for the presence of
R3AI_DNL_CUST_PROD*.
Also, abort the running load in txn:R3AM1 for object DNL_CUST_PROD0.
Then try to re-load the object.
I do not see any other reasons for the above error message.
Best Regards,
Shanthala Kudva.

Similar Messages

  • Object Class Invalid when downloading the pricing procedure from ECC to CRM

    Hi,
    I want to download the pricing procedure for that I have created the ZDNL_CUST_CND which contains only the following tablesT683, T683S, T683T and T683U.
    When I check in R3AM1 status is Red.
    The following Error have been found in SLG1
    •     Object class invalid
    •     Error in inbound data check
    Message no. CND_MAP120
    Diagnosis
    During the receiving inspection, serious errors were found in the consistency of the exchange object.
    System Response
    Data exchange is terminated
    •     Data exchange terminated     
    Message no. CND_MAP122
    Diagnosis
    Data exchange has been terminated due to serious errors. No exchanged data has been posted in the system.
    The following Error has been found in SMQ1
    •     R3AD_CONDITIONS     STOP
    Details of STOP
    Set by Host name: litldq; Transaction: ; Report: SAPMSSY1
    I have checked the connection, everything is perfect.
    What may be the problem?
    Thanks

    Hi,
      Please try to re-generate the adapter object (ZDNL_CUST_CND) services using trx.
    SMOGGEN
    . After this, try re-running the load.
    I assume that your CRM inbound mapping module are correctly coded. If the problem persists, try de-registering the R3AD_CONDITIONS inbound queue using trx.
    SMQR
    and then debugging the inbound queue from the same trx. after re-starting the load.
    Reward if this helps!
    Regards,
    Sudipta.

  • Mapping error while downloading the condition records (ECC to CRM)

    Hello Experts,
    We were downloading the condition records from ECC to CRM system (Production), but due to Mapping error, it was unsuccessful, i wonder what's going wrong there.
    When i see in SMQ2 (CRM Inbound Queue), an queue got stucked there, i.e, R3AD_ZDNL_COND_A930 having SYSFAIL status.
    While debugging the queue, I have found that the queue got stuck because of u2018Mapping Erroru2019.
    I found inside, Standard code reads the record from table /SAPCND/T681 (Condition Table Structure) for KAPPL = 'CRM', KVEWE = 'PR', KOTABNR = 'CUS930' and AS4LOCAL = u2018Au2019 for which the value of VAKEY_OFFSET is maintained as 0.
    If system finds the value of VAKEY_OFFSET is Zero(0) then it will change the download type from D (Delta) to M (Mapping Error) and raise the error & block the Inbound Queue in CRM.
    I checked in SMW01alsofor getting some more knowledge about that queue, here the error description:
    Structure information for table CNCCRMPRCUS930 not available (Message class: CND_MAP)
    Error when carrying out delta download (Message class: CND_MAP)
    I am a technical guy and dont have much idea in CRM Middleware.
    I welcome your valuable thoughts and will award full points.
    Regards,
    Jeo

    Hi,
    As you mentioned i checked for the followings:
    >>In Maintain field catalog:
    I found only 2-3 fields are maintained here, when i compared with A930 (A930 in ECC system).
    >>Create condition tables:
    I checked it for CUS930, i found the same but condition table structure name like CNCCRMPRCUS930 are missing. Is that important? Because i see in SMW01, same error is coming over there : Structure information for table CNCCRMPRCUS930 not available .
    Please suggest me, now what i need to do?
    Regards,
    Jeo
    Edited by: Jeo Denson on Dec 1, 2011 4:11 PM

  • I have error while testing the system created from a sap business objects template in SAP portal

    I have error while testing the system created from a sap business objects template in SAP portal. Error text:
    com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not initialize physical connection. Connection Failed: A nested exception occurred. Could not create JCO connection. 'mshost' missing
    I configure integration SAP portal and SAP BW system. All system requirements are complied.
    Environment
    SAP Business Objects 4.0
    SAP BW 7.31
    1.     I configure SSSO between SAP BW and SAP Business Objects Enterprise 4.0
    2.     Next I setting integration SAP PORTAL with SAP BW system
    3.     I download certificate from portal. Select Certificates and key (http://sapserver:port/nwa) – See scren_
    4.     In next window selected Ticketkeystore and Saplogonticketpair-cert( near part window form)
    5. Select Export entry button and binary format file certificate for download. Press download.
    6.     Save certificate file in local PC folder
    In next step need export certificate file to SAP system. Sequence of step:
    1.       Run STRUSTSS02 transaction .
    2.       Chose certificate ->import.
    3.       Select downloaded certificate file
    4.       Select Add to certificate list button and Add to ACL button
    5.       Inter System ID and Client(000)
    6.       In next I download iview sap business objects template into sap portal: System administration->transport->Import. And select and download sap business Objects iview template in .epa format into sap portal.
    7.       Result – downloaded iview.
    8.       In next step I create system from template. System administration->system landscape.
    9. In next step I input parameters for my system in Connector category, Sap business objects and user management categories: See screen _2
    10.   When I created the system and test the connection error occurred: See screen_3
    This issue is important enough. I would be grateful for opinions and ideas. Thanks in advance.

    Did you find a solution?

  • Error While downloading the file A server Error has occurred, please try again later Downloading Yahoo mail Application Attachments  Trying to download My Photos and movie 3 items so i can delete them all

    I have icloud and a new iPhone5 ! They work good , took pictures and a few short movies, plugged in my phone to my iMac transfered Items to iPhoto then inported items to iMovie. when getting to know what i was doing i decided to delete pictures and movies i no longer wanted. when i looked for a few missing items i opend Finder and there some where buyt i had already trashed them and deleted the doubles. Still could not find missing pictures and movies 3 items and today after calling yahoo about a different complant with sending feed back for Yahoo mail Applications login . i opened up Attachments Not the Large Attachments just Attachments and there were the 3 items i had been hunting for to Trash and delete. the mail Attachments file does not have the Option to delet Files and photos and movies. When i tried to Download the 3 items a window shows up that says Error While Downloading the Files, A Server Error has occured, please Try Again later. nothing works how do i remove the Trapped photo and movie Blank Files and trash them?  Onece they get into my downloads i can do something with them as i understand.    That part of it kind of keeps me in Question also because why should i have to down load my own files of Attachments / Pictures and movies if they are comming from my iMac?    How much better is iLife11 then iPhoto08 and iMovie08 .  Thanks Greg

    Hello,
    Thank you for your post.
    This is a quick note to let you know that we are performing research on this issue.
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Simon Wu
    TechNet Community Support

  • Error : While Importing the Objects in Quality

    Dear all,
           I'm facing some error while transporting the Objects to quality server. The error's like
    Start of the after-import method RS_ISFS_AFTER_IMPORT for object type(s) ISFS (Activation Mode)
    Source system RD1100LS does not exist
    Source system RD1100LS does not exist
    Source system RD1100LS does not exist
    Source system RD1110LS does not exist
    Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode)
    There is no DataSource with these attributes
    There is no DataSource with these attributes
    There is no DataSource with these attributes
    There is no DataSource with these attributes
    There is no DataSource with these attributes
    There is no DataSource with these attributes
        Anyone suggest me how to solve this error..,
    Thanx in Advance..
    Regards,
    Saran

    Hi saran,
    Check the source system connectivity of the Quality system. Also check whether you have transported the datasources related to those objects that you transported from DEV to QAS.
    First you need to transport the Datasources created in R/3 and then replicate them in QAS/Prod and then transport the objects in BW from DEV to QAS/Prod.
    Check all these things and if still the problem persists... Refer to the below threads which may help u...
    Transport Problem - Reference to Transfer Structure not available
    No Source system exist
    Assign points if this helps u...
    Regards,
    KK.

  • Error while downloading the DNL_CUST_PROD1

    Dear Experts
    I am establishing middleware connection between CRM 6.0 and ECC 6.0
    I am getting errors while downloading the DNL_CUST_PROD1.
    I am  getting   sysfail in crm inbound queue(smq2) with error saying
    "   Immport of material type into hierarchy YBPCRMPROD  not possible "
    Could you help me in resolving this error.
    Thanks & Regards
    V.Srinivas

    Hi Arup
    Initially CRM system is a standalone in that we configured the best practises to make it as a BUSINESS ALL IN ONE  while doing this we have defined  hierarchy YBPCRMPROD  in CRM and created products, now we are trying to establish the middleware connectivity between CRM and the ECC while doing this i am getting above error.
    When i check the Hierarchy in CRM with the tcode COMM_HIERARCHY  i am able to see the following
    1)R3MATCLASS        MATERIAL GROUP
    2)R3PRODHIER          PRODUCT HIERARCHY
    3)YBPCRMPROD        BEST PRACTISES PRODUCT HIERARCHY
    When i am trying to see assigned heirarchies to the apllication i am able to  see the following using the tcode COMM_PRAPPLCAT
    application                       HIERARCHY
    sales                               R3PRODHIER
    purchasing                     R3MATCLASS
    product                           YBPCRMPROD
    internet customer           YBPCRMPROD
    When i press f4 on the hierarchiesid i am able to see the following.
    1)R3MATCLASS        MATERIAL GROUP
    2)R3PRODHIER          PRODUCT HIERARCHY
    3)YBPCRMPROD       BEST PRACTISES PRODUCT HIERARCHY
    I  know that we can delete the  hierarchy in the CRM  by running  a program which deletes hierarchies in the crm ,  but  we canu2019t delete the hierarchy which is created in the CRM system without deleting the hierarchy how  can i resolve this issue.
    please help me in resolving this issue.
    Thanks & Regards
    V.Srinivas

  • Downloading Material Master data from ECC to CRM

    Hello friends, I am working in CRM 5.0., I am finding difficulty in downloading Material master created in ECC to a Product Master in CRM. Can you please tell me how to use Customizations to download the material master to product master.

    Hi Rghunandan,
    To carry out the product replication from ECC to CRM,you need to carry out the foll steps.
    First download the customizing objects using R3AS
    DNL_CUST_PROD0 u2013 Material number conversions
    DNL_CUST_PROD1 u2013 Product : Categories
    DNL_CUST_PROD3 u2013 Material : R/3 sales status
    DNL_CUST_SPROD u2013 Sales product item
    DNL_PLANT - Plant
    To download products foll the steps below
    1.Defining Product ID Settings  -COMCPRFORMAT
    Cross-Application Components  SAP Products  Basic Settings  Define Output Format and Storage Form of Product Ids
    This activity describes how to synchronize the product Ids in the CRM system and the R/3 system.
    The material master length is R/3 is defined in transaction code OMSL and is set to 18.  (also check note no. 545824)
    2.Make sure that CRM item categories and R/3 item categories are the same.
    In CRM, item categories and item category groups are seen via
    Customer Relationship Management  Transactions  Basic Settings
    3.Selecting specific objects for replication : R3AC1
    Use adapter object MATERIAL
    Use filter settings tab and specify the material or a range of products you want to download .Use atble name MARA,field MATNR use an approriate operator and mention theproduct you want to downlaod.
    4.Replicate Materials : R3AS
    mention the adaptor object Material and execute
    Regards
    Itty

  • Error in Initial Load of Products from ECC to CRM

    Hi ,
        Im getting below errors In initial load of MATERIAL from ECC to CRM.
    <b>Data cannot be maintained for set type COMM_PR_MAT
    Data cannot be maintained for set type COMM_PR_UNIT
    Data cannot be maintained for set type COMM_PR_SHTEXT</b>
    <b>My Analysis is</b> 
      I found these set types are already assigned in other base category and around 100+ materials are created using this base category.
      After initial load of DNL_CUST_PROD1, i found these set types are not assigned to any of the categories of hierarchy R3PRODSTYP. Since R3PRODSTYP is not having above set types, my initial load is failing.
    <b>Required Solution</b>
      Is there any other way, I can download materials from ECC to CRM, with out deleting the existing materials and Z hierarchy created earlier from CRM.
    Regards,
    Prasad
    Message was edited by:
            SAP CRM

    Hi there,
    Try to attach the Set Types:
    "COMM_PR_MAT", "COMM_PR_UNIT", "COMM_PR_SHTEXT", COMM_PR_BATCH, COMM_PR_LGTEXT, COMM_PR_LGTEXT1,COMM_PR_LGTEXT2,
    to the Category "MAT_" and then run the Initial load again.
    It should work now unless you have some other issues.
    Best regards,
    Pankaj S.

  • Mass download of condition records from ECC to CRM

    Hi Team,
    We need to download many condition records from ECC to CRM. We are doing a request download but it takes lot of time. Is there a way to do a mass download of condition records form ECC to CRM.
    Regards,
    Jan.

    Hi Robert,
    We have all the articles in CRM but the prices are not matching for 2000 articles. Kindly suggest us in doing a mass download of the condition records for those 2000 articles.
    Regards,
    Jan

  • How to Assigning the company code to the billing units from ecc to crm

    Hi,
    Iam doing the roll out project , i require the help.
    can any one suggest me how to assign the company code to the billing units from ecc to crm.
    Thanks
    Mustafa

    Hi Mustafa
    You can load this data from R/3 to CRM by going to transaction R3AS in your CRM system, and using load objects EQUIPMENT, MATERIAL, and CUSTOMER_MAIN.
    Best Regards
    Gavin

  • Error while downloading the sneak preview version of EP6

    Hi Experts,
    I was trying to download  "SAP NetWeaver 2004 & 2004s Trials and Previews on Windows Platform" from SDN , a sneak preview version of EP6.
    i got this error while downloading it ...
    "Unable to process FTP Request
    ftp://ftp.sap.com/pub/sdn/devkits/netweaver/java/SAPNWAS_JAVAEE5_T06.rar"
    Can anyone guide me what is the reason for this and whats the solution to it.
    Regards,
    Ashish Shah

    Please post this issue in the 'Trials, Previews & Other Downloads' forum under 'Community Discussions'.
    Sudha

  • Getting following error while deplying the webDynpro app from NWDS

    I am getting the followin error while deploying the application from the the NWDS
    Aborted: development component 'SalesOrder'/'local'/'LOKAL'/'0.2006.10.10.10.46.54':
    Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
    com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [EIMKOPDVS4] with user name: [Administrator]                     Check your login information.                     Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception while trying to get InitialContext. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Cannot create new RemoteLoginContext instance.]
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
    Deployment exception : The deployment of at least one item aborted.
    Regards
    Vijay

    Hi
    Make an entry in
    C:\WINDOWS\system32\drivers\etc\hosts
    <IP>     <alias>
    anr try it
    Kind Regards
    Mukesh

  • Request Download for Master Data from ECC to CRM resulting in "Wait" Status in R3AR3

    Hi All,
    I have created request download in R3AR2 transaction to download master data for a particular Business Partner from ECC to CRM.
    But after I execute the request in R3AR4 transaction and check its status in R3AR3 transaction, it always states as "Wait".
    Please help me as to how to resolve this issue.
    Thanks in advance,
    Shubham

    Hi Shubham,
    Please check the queues in SMQ2 and what status they are showing?.
    Thanks,
    Faisal

  • Error while download the data to an Excel sheet for ECC report from EP

    Hi experts,
    I had created a report program which will download the data to an Excel sheet using SAP OLE object
    For this report i had created a tcode too. The report which i developed is perfectly working fine in SAPGUI. But if i download the data to an Excel sheet for the same report throught SAP EP.I am getting the  error that "Error in excel downlaod"
    I analyed by putting dubigg point and it throws exception while calling Function module.
    The excpetion is " OLE object id not found".
    Can any body gives a light on this why i'm not able download the excel in ep?
    Thanks,
    JB

    Hello,
    (by the way I came here to ask my question and is my first time visit but...)
    The problem is obvious: How do you expect OLE handler can "touch" the local PC Excel through a web browser? I believe that is not possible. That means (at least for me) that I have to create the whole documents before I return them to the user. That is why I use XML Office documents generation or you can try to hack some Export to excel features of ERP reports.
    Regards Otto

Maybe you are looking for