Error while downloading the stack file
Hi,
I'm in the process of upgrading my EhP4 system to EhP5.
While trying to generate the file via MOPZ, I just can't seem to "Continue" with the Enhancement package installation option.
The error's as follows:
"Successor installed for SAP SNC 2007."--Check SMSY. (SMSY is perfectly reflecting whatever's installed on the ECC system.)
I just can't figure out where SNC has cm in from.
I do have the component ECC-SE on 604...does this have anything to do with it?
Pls. help..
Thank You,
Saba.
Hi Saba,
I've had the same problem as you building the stack file for an EHP5 upgrade and have CPRXRPM version 400 installed. I used you idea of adding SAP SNC 7.0 as an installed product under the ERP system which enabled be to continue the mopz config and build a stack file.
Now when attempting the upgrade I get :-
"The Installation/Upgrade Package for Add-on SCMSNC rel. 700 is not available"
This is not that surprising I guess as its not installed.
Did you also come across this, if so were you able to bypass this?
Thanks
Warren
Similar Messages
-
Error while downloading the xml file
i am having a internal table which contains data in xml format but i am unable to download the data into local system by using 'GUI_DOWNLOAD' fn. module
its error its showing is as :
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
A name contained an invalid character. Error processing resource 'file:///D:/XX.XML'. Line 4, Position 4
MOD/><RPTSX/><MANDT/><SYPSY/><SYSID/><SAPRL/></T682><T682><KVEWE>A</KV...hello Durairaj,
i am fwd the code go thru it and check why the xml file is not downloading,
and after downloading the file i want that file to be in displayed in .pdf.
REPORT ZCCSV_TO_XML.
DATA : BEGIN OF TABLE OCCURS 0,
TABNAME(15) TYPE C,
END OF TABLE.
DATA : BEGIN OF HEADER_NAMTAB OCCURS 0,
NAMTAB TYPE STRING,
END OF HEADER_NAMTAB.
DATA : BEGIN OF CONVERT_ITAB_TO_XML OCCURS 0,
FIELDNAME(255) TYPE C,
END OF CONVERT_ITAB_TO_XML .
DATA : BEGIN OF CONVERT_XML_TO_ITAB OCCURS 0,
FIELDNAME(255) TYPE C,
END OF CONVERT_XML_TO_ITAB.
DATA DREF TYPE REF TO DATA.
DATA TNAME LIKE DD02L-TABNAME.
DATA BEGIN OF ZDFIES OCCURS 0.
INCLUDE STRUCTURE DFIES.
DATA END OF ZDFIES.
DATA: xml_out TYPE string .
DATA: xml_TO_ITAB TYPE string .
data : wa_indx type indx.
DATA : DETAIL(30).
DATA : DATA1 TYPE STRING.
DATA : COMMA . "VALUE ','.
DATA : DBTAB1(15) TYPE C.
FIELD-SYMBOLS: <ITAB> TYPE ANY TABLE,
<WA> TYPE ANY,
<WA1> TYPE ANY .
SELECTION-SCREEN : BEGIN OF BLOCK b1 WITH FRAME,
SKIP 1.
PARAMETERS : SPOOL RADIOBUTTON GROUP rad1 DEFAULT 'X',
CSV RADIOBUTTON GROUP rad1 ,
XMLTOPDF RADIOBUTTON GROUP rad1.
SELECTION-SCREEN : SKIP 1,
END OF BLOCK b1.
TABLE-TABNAME = 'T681'.
APPEND TABLE.
TABLE-TABNAME = 'T682'.
APPEND TABLE.
IF SPOOL = 'X'.
PERFORM SPOOL.
ELSEIF CSV = 'X'.
PERFORM CSV.
ELSEIF XMLTOPDF = 'X'.
PERFORM XMLTOPDF.
ENDIF.
*& Form CSV
form CSV .
LOOP AT TABLE.
dbtab1 = TABLE-TABNAME.
TNAME = dbtab1.
PERFORM GETFIELDS.
LOOP AT HEADER_NAMTAB.
WRITE: HEADER_NAMTAB-NAMTAB, COMMA.
ENDLOOP.
PERFORM GET_DETAIL_LIST.
ENDLOOP.
endform. " CSV
form XMLTOPDF .
LOOP AT TABLE.
PERFORM GET_DETAIL_LIST.
ENDLOOP.
endform. " XMLTOPDF
GETTING THE HEADER OF THE TABLE *
FORM GETFIELDS.
REFRESH HEADER_NAMTAB.
CALL FUNCTION 'GET_FIELDTAB'
EXPORTING
LANGU = SY-LANGU
ONLY = SPACE
TABNAME = TNAME
WITHTEXT = 'X'
TABLES
FIELDTAB = ZDFIES
EXCEPTIONS
INTERNAL_ERROR = 01
NO_TEXTS_FOUND = 02
TABLE_HAS_NO_FIELDS = 03
TABLE_NOT_ACTIV = 04.
CASE SY-SUBRC.
WHEN 0.
LOOP AT ZDFIES.
HEADER_NAMTAB-NAMTAB = ZDFIES-SCRTEXT_M.
APPEND HEADER_NAMTAB.
ENDLOOP.
WHEN OTHERS.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-SUBRC.
ENDCASE.
ENDFORM. " GETFIELEDS
*& Form GET_DETAIL_LIST
form GET_DETAIL_LIST .
CREATE DATA DREF TYPE STANDARD TABLE OF (TABLE)
WITH NON-UNIQUE DEFAULT KEY.
ASSIGN DREF->* TO <ITAB> .
SELECT * FROM (TABLE) INTO TABLE <ITAB>.
CALL TRANSFORMATION ('ID')
SOURCE tab = <ITAB>[]
RESULT XML xml_out.
Convert to TABLE
CALL FUNCTION 'HR_EFI_CONVERT_STRING_TO_TABLE'
EXPORTING
i_string = xml_out
i_tabline_length = 100
TABLES
et_table = CONVERT_ITAB_TO_XML.
Download
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filetype = 'ASC'
filename = 'D:\XX.XML'
TABLES
data_tab = CONVERT_ITAB_TO_XML
endform. -
Error while downloading the PDF file on presentation server
Hi all,
i have converted OTF file into PDF one and then downloading it to the presentation server . But it gives the error as follows
'Access to file denied' . Can anyone tell me what may be the issue ? Below is my code
DATA: i_lines TYPE tline OCCURS 0 WITH HEADER LINE.
DATA: ws_bin_size TYPE i.
DATA: t_otf TYPE TABLE OF itcoo,
ws_filename TYPE string.
t_otf[] = wa_job_info-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = ws_bin_size
TABLES
otf = t_otf
lines = i_lines.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
bin_filesize = ws_bin_size
filename = 'C:\ABC.PDF'
filetype = 'BIN'
TABLES
data_tab = i_lines.Hi Sayeed,
You may not having the permissions to create files in 'C' folder. Change the path and try again. -
I have icloud and a new iPhone5 ! They work good , took pictures and a few short movies, plugged in my phone to my iMac transfered Items to iPhoto then inported items to iMovie. when getting to know what i was doing i decided to delete pictures and movies i no longer wanted. when i looked for a few missing items i opend Finder and there some where buyt i had already trashed them and deleted the doubles. Still could not find missing pictures and movies 3 items and today after calling yahoo about a different complant with sending feed back for Yahoo mail Applications login . i opened up Attachments Not the Large Attachments just Attachments and there were the 3 items i had been hunting for to Trash and delete. the mail Attachments file does not have the Option to delet Files and photos and movies. When i tried to Download the 3 items a window shows up that says Error While Downloading the Files, A Server Error has occured, please Try Again later. nothing works how do i remove the Trapped photo and movie Blank Files and trash them? Onece they get into my downloads i can do something with them as i understand. That part of it kind of keeps me in Question also because why should i have to down load my own files of Attachments / Pictures and movies if they are comming from my iMac? How much better is iLife11 then iPhoto08 and iMovie08 . Thanks Greg
Hello,
Thank you for your post.
This is a quick note to let you know that we are performing research on this issue.
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support -
Error while loading the WSLD file
Hi all
I am trying to consume a Webservice. When i try to create the Model out of the WSDL file, it says "Error while loading the WSDL file".
Its an XI webservice, so i cannot view it from Webservice navigator.
How could i find out that, the problem is with the Webservice or i am missing any thing
Kindly help
regards
DeepuHi
I checked the log and i am getting the following exceptions
1.DynamicProxy.TempDir=C:\DOCUME1\DEEPUM1\LOCALS~1\Temp\, DynamicProxy.INetProxy.Host=}'
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:413)
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model.
2. Caused by: com.sap.engine.lib.xml.util.NestedException: IO Exception occurred while parsing file:Invalid Response Code: (401) Unauthorized. The requested URL was:"http://Pinnacle:50000/XISOAPAdapter/MessageServlet?channel=:PowerEP_BusService:Out_SOAP_DocViewDownload" -> com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (401) Unauthorized. The requested URL
3. java.lang.NullPointerException
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DOperationImpl.initParameters_DocumentStyle(DOperationImpl.java:59)
Is this any authorization problem
regards
Deepu -
Error while updating the configuration files (MOB20003)
hi,
After installing the BI 4.0 server, i am trying to configure mobile using mobile server configuration tool. When i enter all the information for non Blackberry option as i would like to access through ipad, its giving me the error message" Error while updating the configuration files (MOB20003)" Please advise.Hi Somesh,
If i am not wrong, only a war file deployment is needed to make ipad work.
This happens with URL hitting directly on the Server.
If you want to configure VAS and VMS servers, let us know what configuration settings have been done.
Regards,
Atul -
SWF error- while generating the flash files.
Post Author: [email protected]
CA Forum: Xcelsius and Live Office
Hi, in the old forum I came across the folowing topic: SWF error- while generating the flash files.
As I have the same problem, I would like to know the solution / answer / meaning please. What do I have to change in order to let in function properly again.
Thanks anyone.
Femke
(The post is from 3/6/2007)
The following error is generated upon generating the flash files Any insight???SWF error- while generating the flash files.--ErrorSWF Function Overflow. The generated SWF will not function correctly because data dependencies go beyond SWF limits.--
OK -Post Author: Andres
CA Forum: Xcelsius and Live Office
Hello.
I'm having the same problem. It appeared after I made use of many cells (a table of 10x200 cells) with formulas inside them.
Before that, while I was making my tests and only used a few cells and the .XLF file was 4Mb, I had no problem. Now that the .XLF file is 8Mb I see this error appearing (in Spanish):
"Error
Desbordamiento de la función SWF. El archivo SWF generado no funcionará correctamente ya que las dependencias de datos superan los límites de SWF."
Any idea of how this could be resolved (appart from using less data)?
Thanks in advance. -
Error while downloading the DNL_CUST_PROD1
Dear Experts
I am establishing middleware connection between CRM 6.0 and ECC 6.0
I am getting errors while downloading the DNL_CUST_PROD1.
I am getting sysfail in crm inbound queue(smq2) with error saying
" Immport of material type into hierarchy YBPCRMPROD not possible "
Could you help me in resolving this error.
Thanks & Regards
V.SrinivasHi Arup
Initially CRM system is a standalone in that we configured the best practises to make it as a BUSINESS ALL IN ONE while doing this we have defined hierarchy YBPCRMPROD in CRM and created products, now we are trying to establish the middleware connectivity between CRM and the ECC while doing this i am getting above error.
When i check the Hierarchy in CRM with the tcode COMM_HIERARCHY i am able to see the following
1)R3MATCLASS MATERIAL GROUP
2)R3PRODHIER PRODUCT HIERARCHY
3)YBPCRMPROD BEST PRACTISES PRODUCT HIERARCHY
When i am trying to see assigned heirarchies to the apllication i am able to see the following using the tcode COMM_PRAPPLCAT
application HIERARCHY
sales R3PRODHIER
purchasing R3MATCLASS
product YBPCRMPROD
internet customer YBPCRMPROD
When i press f4 on the hierarchiesid i am able to see the following.
1)R3MATCLASS MATERIAL GROUP
2)R3PRODHIER PRODUCT HIERARCHY
3)YBPCRMPROD BEST PRACTISES PRODUCT HIERARCHY
I know that we can delete the hierarchy in the CRM by running a program which deletes hierarchies in the crm , but we canu2019t delete the hierarchy which is created in the CRM system without deleting the hierarchy how can i resolve this issue.
please help me in resolving this issue.
Thanks & Regards
V.Srinivas -
Error while uploading the PAR file of Production to UAT-
Hi Experts,
Could you please help me out in resolving the error which i'm facing while uploading the PAR file.
1. I have downloaded the par file from the production, imported to my NWDS.
2. Made changes to my HeadiView.jsp
3. I want to test my implementation in UAT.So i have uploaded the PAR to UAT system.
4. Below is the error i'm getting from the Log trace.
#1.#D27E2000F002008200000020000BD0FE0004436CD4EBF6C2#1200034614604#com.sap.porta
l.prt.runtime#sap.com/irj#com.sap.portal.prt.runtime#BVISHALA#17971##adcapsap18.
uk_QP0_16441150#BVISHALA#5d8f9460c01111dcafa2d27e2000f002#Thread[PRT-Async 2,5,P
RT-Async]##0#0#Error##Java###06:56_11/01/08_16441150
[EXCEPTION]
#1#com.sapportals.portal.prt.component.PortalComponentException: Error in in
it method
Component : com.tw.navigation.Masthead.HeaderiView
at com.sapportals.portal.prt.component.PortalComponentContext.init(Porta
lComponentContext.java:251)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.refr
esh(PortalComponentContextItem.java:271)
at com.sapportals.portal.prt.core.broker.PortalComponentContextItem.getC
ontext(PortalComponentContextItem.java:316)
at com.sapportals.portal.prt.component.PortalComponentRequest.getCompone
ntContext(PortalComponentRequest.java:387)
at com.sapportals.portal.pb.PageBuilder.createIviewProfile(PageBuilder.j
ava:443)
at com.sapportals.portal.pb.PageBuilder.createiView(PageBuilder.java:391
at com.sapportals.portal.pb.PageBuilder.createAndAddiViews(PageBuilder.j
ava:233)
at com.sapportals.portal.pb.PageBuilder.doOnNodeReady(PageBuilder.java:6
36)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEve
nt(AbstractPortalComponent.java:388)
at com.sapportals.portal.pb.PageBuilder.handleEvent(PageBuilder.java:816
at com.sapportals.portal.prt.component.CachablePortalComponent.handleEve
nt(CachablePortalComponent.java:703)
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode
.java:252)
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.j
ava:368)
at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.
java:340)
at com.sapportals.portal.navigation.PortalLauncher.doOnNodeReady(PortalL
auncher.java:318)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEve
nt(AbstractPortalComponent.java:388)
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode
.java:252)
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.j
ava:368)
at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.
java:340)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(P
ortalRequestManager.java:642)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(
ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatc
her.java:524)
at java.security.AccessController.doPrivileged(AccessController.java:242
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.ja
va:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.se
rvice(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcher
Impl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcher
Impl.forward(RequestDispatcherImpl.java:377)
at com.sap.portal.navigation.Gateway.service(Gateway.java:126)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServle
t(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleReq
uest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServle
t(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServle
t(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebCo
ntainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(Requ
estAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:9
5)
at com.sap.engine.services.httpserver.server.Processor.request(Processor
.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSes
sionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRu
nner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:3
7)
at java.security.AccessController.doPrivileged(AccessController.java:215
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.ja
va:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:1
70)
Caused by: com.sapportals.portal.prt.core.broker.PortalComponentInstantiationExc
eption: Could not instantiate implementation class com.btexx.pct.easyWCM.navigat
ion.masthead.HeaderiView of Portal Component com.tw.navigation.Masthead.HeaderiV
iew because: Could not find implementation class
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getIn
stanceInternal(PortalComponentItemFacade.java:242)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getCo
mponentInstance(PortalComponentItemFacade.java:160)
at com.sapportals.portal.prt.core.broker.PortalComponentItem.getComponen
tInstance(PortalComponentItem.java:732)
at com.sapportals.portal.prt.component.PortalComponentContext.getCompone
nt(PortalComponentContext.java:103)
at com.sapportals.portal.prt.component.PortalComponentContext.init(Porta
lComponentContext.java:242)
... 44 more
Caused by: java.lang.ClassNotFoundException: com.btexx.pct.easyWCM.navigation.ma
sthead.HeaderiView
at java.lang.Class.forNameImpl(Native Method)
at java.lang.Class.forName(Class.java:152)
at com.sapportals.portal.prt.core.broker.PortalComponentItemFacade.getIn
stanceInternal(PortalComponentItemFacade.java:228)
... 48 more
Kindly help me to resolve this issue.
Many Thanks,
B.Vishali.Hi,
The problem might be caused by the version inconsistency of your J2EE and Portal Platform.
Please check the version of your J2EE and Portal.
Best Regards,
Assaf -
Error while importing the epa file..help needed urgently..
Hi,
I am facing a severe problem, I have developed a portal application, designed the pages, iViews roles etc and exported to a file and later downloaded the epa file.
For testing purpose, I deleted my content folder of the pages and iViews from the content administration. But when i tried to import the file, I am getting an error message
<b>" Error extracting the package file. Check the log files for details. "</b>
When i lokked the log file, i found the exception as
<b>" [com.sapportals.portal.transport.ui.ImportComponent] Error while extracting EP6.0 package C:
usr
sap
J2E...
MyEpafile.epa "</b>
and below the erro i found an exception message as <b>"error in opening zip file"</b>
When i tried to extract the file using winzip, I can extract it with out any problem..
Can you please tell me how this happened?
Please help me to solve this problem,
Thankyou,
Sudheesh...Hi Christopher,
Well, I have solved the problem. But I don't know whether it will be the correct technical way.. Because i have to solve the same under a very little time constraint. The solution is given below,
I unzipped the epa file which i have downloaded using winzip. inside the extracted file, i found a zip file with the same file name and extension. when i uploaded that file, it worked fine with out any problem. I tried the same many times. and each time i got the same results.
Please try this if you are still facing the problem..
Best regards,
Sudheesh... -
Error while deploying the par file
while deploying an application in NWDS we are getting the error as"operation failed,please make sure that the server is running or check the log."
we have ensured that the server is running,but the deployment is getting failed.
Please suggest tips to deploy the PAR file successfully.
Thanks.Hi,
We are using NWDS to create a small application to develop ( for ex jspdynpage)
.while deploying the par file or exporting it to the server,we are getting the error as "please make sure that the server running.HTTPS protocol is not supported,please ensure that this server is not using HTTPS.
the server is running and is shown in green.
we have also disabled the proxy settings.
we have also tried by specifiing the IP of the server in the proxy settings.
the above steps didnt work.please suggest the things to do to make this working.
thanks,
rajani. -
Error in Downloading the Text file on Application Server
Hi All,
I am working on ECC6.0. I have written a program in whcih I am downloading the text file on
application server in UTF-8 format. However when I am opening this file in Excel I am getting
garbage value for some characters(as Excel does not support UTF-8 format). So now I
want to download the data on application server in text file in non unicode format(Like ANSI or
other non unicode format) which is supported by excel. When I am writing the code as
OPEN DATASET DN_FILE FOR OUTPUT IN LEGACY TEXT MODE it is giving me dump saying
CHARACTER CONVERSION FROM CODE PAGE '4102' to CODEPAGE '1100' NOT POSSIBLE.
Same in case if I add the code OPEN DATASET DN_FILE FOR OUTPUT IN LEGACY TEXT
MODE CODE PAGE '8000' is also giving dump.
So please let me know how can I download the file in non unicode format ?
Any help would be greatly appricated.
Thanks & Regards
Jitendra Gujarathi.OPEN DATASET l_filename FOR INPUT IN TEXT MODE ENCODING NON-UNICODE IGNORING CONVERSION ERRORS.
CHECK sy-subrc EQ 0.
DO.
CLEAR wa_file_content.
READ DATASET l_filename INTO wa_file_content.
IF sy-subrc EQ 0.
APPEND wa_file_content TO it_file_content.
ELSE.
EXIT.
ENDIF.
ENDDO.
CLOSE DATASET l_filename.
t_filedata[] = it_file_content[].
can you use like this. -
Error while sourcing the environment file
Hi,
Apps 11.5.10.2
O/S windows 2003 server
While sourcing the environment file i am getting the following error
E:\>oracle\prodappl\appsprod_tstoraf.cmd
ECHO is off.
ECHO is off.
Wed 10/06/2010 06:45 AM
ECHO is off.
ECHO is off.
This script requires the following files:
ECHO is off.
C:\MicrosoftVisualStudio\bin\vcvars32.bat
ECHO is off.
APPSORA.cmd exiting with status 1
After this command i am running the following (i am including vc98 directory in the path)
E:\>C:\MicrosoftVisualStudio\VC98\bin\vcvars32.bat
Setting environment for using Microsoft Visual C++ tools.
Actually vcvars32.bat file is under C:\MicrosoftVisualStudio\VC98\bin\vcvars32.bat directory structure
but
in appsora.cmd it is showing the C:\MicrosoftVisualStudio\bin\vcvars32.bat (VC98 Directory is not present in this path)
In contextfile.xml i have not seen any path related to vcvars32.bat.
In which file i have to change this directory structure of C:\MicrosoftVisualStudio\bin\vcvars32.bat to E:\>C:\MicrosoftVisualStudio\VC98\bin\vcvars32.bat
please advice
Regards,
SRKHi Srk;
That SR was raised by my team only.
I have gone through the doc id's given but my Visual Studio directory is more than 8 characters.So Could you please advice, instead of re-installing the visual studio? whether there is any file to change the path from If you already opened SR you have to confirm it wiht Oracle Support
Also,If we have to re-install the Visual Studio .will be there any effect on the existing 11.5.10.2 application?I belive yes it could effect your system until your install process end.
Please confirm all those wiht oracle support via your SR
Regard
Helios -
WebInterface Server - Error while opening the PDF file
Hello,
We are using webinterface to display the MSDS genearated.
Our customers use the link provided to them for displaying the msds.
We imported a few MSDS ( CG36 ), which are in PDF format & displayed successfully on the webinterface server.
However the newly generated MSDS ( Create Report ) from SAP EH&S system are not getting displayed on the webinterface server. We are getting following error message:
Error reading resulitng document from filesystem. Class:
COM.td.ehswww.results.EhsDocument.
Method:getResolvedDocument().This error could have been caused by a misconfigured filter.ini.
We checked and found that the filter.ini file is same on both quality & production system.
We are able to generate & display the report successfully on quality webinterface server.
Problem only appears on the production webinterface server.
We also tried to search for the SAP notes on this issue.
But we could not find out any relevant note for our issue.
Any help in this regarding is highly appreciated.
Thanks & Regards,
AarohiHello Sebastian,
Thank you very much for your help.
We checked on both quality & production webinterface server.
The Tomcat service is not executed with any specific user.
The system is working fine on quality , we are getting errors only on the production.
We also identified a strange behavior on the production web interface server.
We are able to see files under following menu path:
There are error files getting generated.
I guess these error files are getting generated while converting the rtf file to pdf file.
The resultant PDF file is not getting generated and hence system is giving the error on the webpage.
Can you guide us as to why these error files are getting generated .? What can be the root cause of this issue.? and How to prevent this.?
Again thanks a lot for your help.
Best Regards,
Aarohi -
Error while introspecting the JAR file
I get the following error while introspecting the JAR into BPM
[Error] Introspection exception : Internal Error:
java.lang.UnsupportedClassVersionError: Bad version number in .class file.
Anybdy knows whats the error?It means you're using different JDK versions to run OBPM Studio and to compile the classes in your JAR. If you recompile the classes with the same major version of the JDK you use in Studio the introspection should work.
Maybe you are looking for
-
Laptop not even a year old and the power cord is stripping really bad and barely working
My toshiba laptop is not even a year old and the part of the cord closest to my computer is becoming really stripped. I noticed that it got very hot during pc use, I just assumed that was normal, but I'm starting to think that this heat made the rubb
-
after transfering data froAm my pc to mac using windows migration assist, where do the data go to on my mac please?
-
Does creating and using multiple constants (string or numeric, say instead using of two numeric constants, conating same value, at two stantdifferent locations in the same VI, if I use one constant as common) affects anywaym on performance or memory
-
How to remove extra spaces in a xml formatted string
Hi, I am trying to remove extra spaces between the xml tags. For example, if a string is something like ' <header 1> <header 2> test </header 2> </header1>' I want to get rid of the spaces only between the closing tag of header 1 and opening tag of h
-
Hi, i just bought a 20gig ipod photo. I dont know if this is causing the problem, but, the day i got it, as the ipod was formating, 1/2 way later the ipod just froze, and the screen just switched to like safe mode or something ( No color/backlight) a