ERROR while excecuting BEx query
Hi Friends,
I executed a Bex query and error is displayed Page not Found while connecting.I am using a Remote desktop.
Can you please let me know how can i correct the error.
Appreciate your help
Thanks
Sahasra
Hi Sahasra,
Can you provide more details about your issue. At the same time you can check the following points.
1. When you are executing the query, does it ask for your SAP user ID and password.
2. You can check the link on your webpage, whether its referring to the correct query. Query name will be there on URL.
3. There could be a connection issue, check with you basis team.
Thanks,
Sachin
Similar Messages
-
Error while integrating BEx Query with Cognos
Hi all,
we have made 999 rows and 150 columns..
but we r unable to integrate it with cognos if we remove free characteristics....
and it thows me the following error
1.BAP-ERR-0002 a BAPI error has occured in the function module RFC_READ_TABLE. NOT_AUTHORIZED
2.error when generating data provider
3.Query is too large
Please do reply immediately with the correct solution
Regards
MadhaviHi Vani Reddy
Jus one quick finding are there any new patches upgrade taken place in your system . its in generally occurs because patch issues please refer the following note 1325527.
it may helps you in this reg.
Hope its clear a little..!
Thanks
K M R
***Even if you have nothing, you can get anything.
But your attitude & approach should be positive..!****
>
vani reddy wrote:
> Hi All,
>
> While executing Bex Query user is getting below error message after 20 mins and coming out of BEx.
>
>
>
> Error Group
>
> RFC_ERROR_SYSTEM_FAILURE
>
> Message
>
> An exception that could not be cought occured.
>
> Thanks in advance
> Vani
Edited by: K M R on Aug 12, 2009 2:14 PM -
Error while executing BEX query via FM
Hi Friends,
I am getting following error while executing a query via FM RRW3_GET_QUERY_VIEW_DATA.
Please see the error screenshot as follows.
the I_T_PARAMETERS entered are as follows.
Please let me know what is missing.
Thanks.
Regards,
Hrishikeshthe key date variable 0DAT is normally filled by a SAP exit variable, but this may not be the case. it could have been changed in the query designer, check the query in query designer and see.
Try passing 0DAT in the variable list with todays date -
Error while executing BEx Query on Composite Provider
Hi,
We have a BW on-HANA system, patch level SAPKW73105.
We have created a Composite provider based on the union of two DSOs, two infoobjects, one SPO, and there are a couple of joins with two other DSOs, on the top of that we built a BEx query.
While executing the BEx query, sometimes (depending on the filter values), We got the following error message
"Attribute engine failed;Error executing physical plan: exception 6900: AttributeEngine/Parallel/DimensionFilter.cpp engine failed; $function$=getValidFemsPA;"
"Error 6,900 has occurred in the BWA/SAP HANA server"
"Error reading the data of InfoProvider @3ZSDRPCP5"
"Error while reading data; navigation is possible"
"Row: 59 Inc: MAP_TREX_EXCEPTION Prog: CL_RSDRH_TREX_STORAGE"
(Attached error message)
Ii We browse the composite provider data using the "display data" option in the RSA1, data is displayed without issue, the problem only appears during the BEx query execution and only with some filter vaues.
Any idea on how to fix the issue.
Thanks,
FedericoHe's on 7.3 EhP1, which is on SPS12 today. It got pretty stable by SP08, SP09. SP05 was pretty early on, and had a lot of bugs in the HANA views.
7.4 is on SP07 like you say, and most of our customers run at least SP06 - before then, you had to apply a bucketload of SAP notes. I would recommend customers apply SP08 with care because it's a feature release so will have a bunch of new features, which will no doubt need corrections. -
Error while executing BEx query made on Multiprovider having Virtual cube
Hi All,
We are getting an error message while executing a BEX query made on Multiprovide which consist of a Virtual Infocube infocube which extracts data from APO Live Cache, the error which we get is as below
''Error Reading the data of the infoprovider ZSS_R054
Error in Substep
Errors have occured while extracting data from datasource 9A_E2E_FC2
Errors occured during parallel processing of query 4, RC:3
Error while reading data; navigation is possible''
And also when tried to execute from RSRT , it gets executed in debug mode in TRY and CATCHE
Please let us know if anyone faced a similar situation or can suggest me what to do.
Please suggest.
Thanking you in advance.
regards,
ajayHi Ajay,
Try RSRV transaction, Select All Elementary Tests, Select query, now drag both these items on the right hand pane, select your query from this popup. and execute.
Let us know what the result is.
regards,
Sree. -
Error while executing Bex Query
Hi all,
i am getting error while executing the Bex Query.i am able to change and save the Query without any issues.
Error:
<internal error> Receiving from the BW server failed.BW server raised exception:SYSTEM_FAILURE
Do you want to see more information?
YES--->Syntax error in Program SAPLY05BW_ISA
Details:
Error Group
RFC_ERROR_SYSTEM_FAILURE
Message
Syntax error in program SAPLY05BW_ISA
What could be the problem?pl help me out!
ThanksHi,
Try this:
Execute the report RSFTP005 in BIW.
With rgds,
Anil Kumar Sharma .P -
Getting Java error while connect BEx query to WebI report (SAP BI4.0 )
Not able to connect BEx query to WebI report (SAP BI4.0 ) . Below is the error I get while creating a new BEx connection to BOBJ WebI report .
Please find the below error and help me ,
"Select a BW Bex query window box " displayed "Nothing to display " and server error as mentioned below
Java.uti.concurrent.executionException: Com.sap.sl.sdk.repository.service.repositor******
at Java.uti.concurrent.futuretask (Unknown source )
at java.swing.swing.timer.fireactionperformed(Unknown source )
at java.awt.event.invocationEvent.dispatch(Unknown Source)
Thanks ,
Pradeep GorpaduHi,
I am on BO 4.0 SP05 Patch 6. Webi reports are just showing processing but not giving results. When I try to create new report it is throwing java security error.
Tried applet patch upgrade(From link : https://websmp207.sap-ag.de/~sapidb/011000358700000902752013E) for webi certificate but didn't help.
Please suggest what could be done.
Thanks and Regards,
Ankit Sharma -
Giving Error while opening BEx Query Designer.
Hi all,
A user is trying to open BEx Query Designer 7.0 and she is getting this error
" SAP BEx Query Designer standalone has encountered a problem and needs to close. We are sorry for the inconvenience.
If you were middle of something, the information you are working on might be lost. "
She is not having issues while opening BEx Analyzer. She is having Office 2010. This doesn't seem to be compatibility issue with the Office. This BEx was not installed on her machine 2 weeks back and it was working fine until now.
As a first re-solution i told her to get it re-installed but still she is getting the same issue.
Thanx.Hello,
There is no relation between Office VS Query Designer. Only with BEx Analyzer and MS Excel.
My suggestion is.
If you don't have version 7.20 of SAPGUI and Business Explorer, please download the installer.
After that, download the latest patch available and install:
http://service.sap.com/swdc
> Support Packages and Patches
> Browse our Download Catalog
> SAP Frontend Components
> SAP GUI FOR WINDOWS
> SAP GUI FOR WINDOWS 7.20 CORE
> Win32
_ > * gui720_5-10007878.exe
| > BI ADDON FOR SAP GUI
| > BI 7.0 ADDON FOR SAP GUI 7.20
|_ > * bi720sp03p_301-20006596.exe
|
| > BI ADDON FOR SAP GUI
| > BW 3.5 ADDON FOR SAP GUI 7.20
| > Win32
|_ > bw350gui720_5-20006857.exe
If persist, let me know.
Cheers
Edward John -
Hi Mates,
Throught webi if i try to connect to a bex query im getting the attached error message, any idea what to do..
2 days back im able to connect to bex query frm webi..frm yesterday its not happening
regards,
mahihi Ray,
Bex query is checked , and pwd is also fine, but i think java need to be updated in my pc
and im getting the below errrors while opening webi in BI launch pad.........any idea -
hi all,
While i try to execute a query i am getting the below error msg. How to rectify it. Can i suppress the message and execute the query. I want to look at the keyfigure/characters used in the query how to look at it.
Warning following error for partial infocube = zsbmt in rsdrc_cube_data_get_rfc
error ods zsbmt not configured for bex reporting
abort system error : rsrdc/form data_get_ods error in rsdro_read_ods_dat zsbm
abort system error in program saplrsdrc and form rsdrc/form data_get_ods.
thanxs
harithaHi,
it looks like the ods, you are running the query on is not enabled for bex reporting. So goto the ods maintenance and switch on bex reporting in the settings of the ods.
regards
Siggi
PS: someone removed the flag after the query was created. -
Hi all
I created a Global RKF in Query desinger and when i click on Save button, it is throwing error
[Query name] contains errors do you want to save anyway?
why i am not able to create RKF, If i delete that RKF and click SAVE its working fine, but if I create a Global RKF it's throwing error.
What i Did is I select the option No, and tried to create again the same RKF with same Technical name then it says already RKF exists but i dont see that in any other query's too, then i logout and once again login and tried with same technical name and same RKF then it worked but for only one RKF, when i create another RKF and save query same error is showing up.
Did any one face this issue before?
ThanksIn SAP we can't create any of the objects with the same Technical name, but you can create the objects with same description with different Technical names...
You might have checked the Description which is same for the other RKF you are referring too...
Why you want to create the RKF with the same name? why don't you make use of already existing one?
If you are not able to find it ,,some body might have created and later they had deleted it. but the entry is still there in the tables.
Give a try and check out your self... -
We are facing error while executing Bex report.
Hi Gurus:
We are facing error while executing Bex report.
Messge :
u201CQuery 0: Runtime error program state check for conversation 05284411 / CP with parallel processing via RFC
Message no. DBMAN428u201D
The query is based upon Multiprovider (based upon 2 basic cubes).
Both cubes are partitioned by info object 0CALMONTH, (valid range - 01.2005 - 012.2010).
Those cubes are not containing any non-cumulative key figures and Service package level for SAP NetWeaver BI 7.0 is u2018SAPKW70012u2019.
I have checked those cubes in RSRV and carry out following steps:
"All Elementary Tests -> Transaction Data" and execute the repair "Consistency of the Time Dimension for an Info Cube"
I have found system inconsistency like u201CRecord with the DIMID 2 contains non-fitting time characteristics u201C
Detail ERROR:
Record with the DIMID 2 contains non-fitting time characteristics
Message no. RSCV053Diagnosis
The data record of the time dimension table with the described DIMID contains values for time characteristics that do not fit together.
I have found the u2018 Note 1130450 - Query displays error DBMAN 284; RSRV: Time dimension checku2019 for this but still not sure this will work or not .
I tested this in dev server , didn't feel useful.
Could you please let us know what to correct this error.
Anwser will be rewared.
Regards,>
Surendra Pande wrote:
> Anwser will be rewared.
> Regards,
Go read the RULES of these forums. -
Error while trying to query mbean
I am getting an error while trying to query MBeans:
<Mar 27, 2007 4:27:32 AM MDT> <Warning> <JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.>
ERROR: Tue Mar 27 04:27:32 MDT 2007MBeanHome being refreshed weblogic.management.NoAccessRuntimeException: User guest does not have access permission on weblogic.admin.mbean.MBeanHome
Bea doc says that the cause of this error is that the context is closed in a different thread than the one that created it. I have multiple thread that query the mbeans. The code that does the above is in a synchronized block. The code runs fine on some environments. On wls 8.1 it is giving the above error.
Anyone faced this issue? Any ideas, suggestions?
thanks a lot
JainHi Daniel
Thanks for your help. Here is some more info.
I have another application that goes out and tries to get the MBeanHome. Here is the code:
Environment env = new Environment();
env.setProviderUrl(t3URL);
env.setSecurityPrincipal(t3UserName);
env.setSecurityCredentials(t3Password);
ctx = env.getInitialContext();
mBeanHome = (MBeanHome) ctx.lookup MBeanHome.ADMIN_JNDI_NAME);
This code runs fine in the app. where it is not threaded. But the same code when run in a separate thread is throwing the error. It is happening only in wbl 8.1. In wls 6.1 it runs fine. It is strange. Any clues will be appreciated. -
Problem while opening Bex query on the web
Hello BW experts,
I have a problem while opening Bex query from my SAP Favorites.See below.
When i double click on the query, i get the following page, with the server name KBWS01QX.
But, from RSRT Tcode, select the query > query display as HTML > Click on ABAP Web , click execute as shown below, it is going to the correct URL as in the 2nd screen shot below.
My question is why is it going to the wrong URL when i open it from SAP Favorites menu?
I want it to open the same URL as it opened from RSRT(which is the right one)
What is the Config needed to make it to work from SAP favorites.
Any help would be appreciated.
Thanks alot.
SVHello,
Thank you all for your responses.
See below some additional info.
From RSRT, this time I clicked on JAVA WEB, and i get the below URL, which is the same URL i was getting when i executed the query from SAP favorites.
http://kbws01qx.xxxxxxx.com:50000/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=ZCONSUMPTION
Also, i have executed the Function module : RSBB_URL_PREFIX_GET and i get the below values.
It seems that it is trying to connect to Java portal something services may be, but i want it to open in ABAP web only.
Please help. -
Error while executing the query
Hi all,
I am facing two errors while executing my query namely
1)The validity interval has initial value as lower limit.
2)Diagnosis
Query uses non-cumulative key figures. It requires calculation for non-cumulative values for more than 2000 periods in time. The most common reason for this is that the non-cumulative InfoCube has a very large validity interval and the query has no time restrictions. With exception aggregation AVERAGE (AV1 or AV2) in particular, this lack of time restriction would result in considerable memory and performance problems.
System Response
Query cannot be executed in this way.
Please suggest a possible reason for these errors.
Thanks and Regards.
Mudit KhannaHi,
See
Refer Notes 496638,571364
210432
528202
1318741
208546
and also see simila thread
Problem getting data from BF cube in report (Non cummulative keyfigures)
Thanks
Reddy
Maybe you are looking for
-
Assignment of chart of Dep to company code
Dear All, While assigning the chart of depreciation to my company code the system give the error is inconsistency in fi company code. pls ex plain why it is comining? thanks in advance regards avudaiappan
-
Redeploy sender soap adapter 7.1
We have PI 7.1 SP7 and expriencing many problems with the sender SOAP adapter the service registry works for us for all web services but from other applications like xmlspy and soapui we get messages of chace problems and unauthorized ( all cache che
-
I have a requirement to have a-z in a spinner? Any ideas if this can be accomplished in ADF? -Srini.
-
Tapping on links bring up the navigation bar
I am working on a digital book using Folio producer and everything is hunky dory! Except when there are buttons or links I want people to be able to tap it also bring sup the reader's navigation bar. I want to have the navigation bar in there but may
-
Condition Type-Change-Email Triggering
Hi Friends, Problem is: Whenever there is a change done in pricing condition types a email must be triggered... How to go about this ?????? Best Regards