Error while executing BEx
hi !
I am getting the following error while executing the query .
Abort system error In program Cl_RSDM_READ_MASTER_DATA and form_sidval_direct_
Please suggest .
Do you have any replacment path variable defined in the query?
MASTER_DATA_READ is done either by end of the query execution (before the formating the result area) or while performing the value population for any formula / KF where replacement path is used.
- Danny
Similar Messages
-
We are facing error while executing Bex report.
Hi Gurus:
We are facing error while executing Bex report.
Messge :
u201CQuery 0: Runtime error program state check for conversation 05284411 / CP with parallel processing via RFC
Message no. DBMAN428u201D
The query is based upon Multiprovider (based upon 2 basic cubes).
Both cubes are partitioned by info object 0CALMONTH, (valid range - 01.2005 - 012.2010).
Those cubes are not containing any non-cumulative key figures and Service package level for SAP NetWeaver BI 7.0 is u2018SAPKW70012u2019.
I have checked those cubes in RSRV and carry out following steps:
"All Elementary Tests -> Transaction Data" and execute the repair "Consistency of the Time Dimension for an Info Cube"
I have found system inconsistency like u201CRecord with the DIMID 2 contains non-fitting time characteristics u201C
Detail ERROR:
Record with the DIMID 2 contains non-fitting time characteristics
Message no. RSCV053Diagnosis
The data record of the time dimension table with the described DIMID contains values for time characteristics that do not fit together.
I have found the u2018 Note 1130450 - Query displays error DBMAN 284; RSRV: Time dimension checku2019 for this but still not sure this will work or not .
I tested this in dev server , didn't feel useful.
Could you please let us know what to correct this error.
Anwser will be rewared.
Regards,>
Surendra Pande wrote:
> Anwser will be rewared.
> Regards,
Go read the RULES of these forums. -
Javascript Error while executing BEx querry from browser
Hi Folks
We have been getting a number of Javascript errors while executing BEx querries from the browser.
The various errors that we have been getting are:
'SAPBWItemCatalog' is undefined
'SAPBWJSgdo' is null or not an object
'SAPBWShortCutCatalog' is undefined
We have already looked at SAP Note 783496 and validated the solution.
Is there some specific settings that needs to be maintained for this?Hi Sandip,
Just spent 2 hours chasing this one so I know how frustrating it is.
Solution:-
Check mime service in SICF - dafault_host/sap/bw/mime - if it's greyed out activate it.
Regards
Nev -
Error while executing Bex Query
Hi all,
i am getting error while executing the Bex Query.i am able to change and save the Query without any issues.
Error:
<internal error> Receiving from the BW server failed.BW server raised exception:SYSTEM_FAILURE
Do you want to see more information?
YES--->Syntax error in Program SAPLY05BW_ISA
Details:
Error Group
RFC_ERROR_SYSTEM_FAILURE
Message
Syntax error in program SAPLY05BW_ISA
What could be the problem?pl help me out!
ThanksHi,
Try this:
Execute the report RSFTP005 in BIW.
With rgds,
Anil Kumar Sharma .P -
Error while executing BEX query via FM
Hi Friends,
I am getting following error while executing a query via FM RRW3_GET_QUERY_VIEW_DATA.
Please see the error screenshot as follows.
the I_T_PARAMETERS entered are as follows.
Please let me know what is missing.
Thanks.
Regards,
Hrishikeshthe key date variable 0DAT is normally filled by a SAP exit variable, but this may not be the case. it could have been changed in the query designer, check the query in query designer and see.
Try passing 0DAT in the variable list with todays date -
Error while executing BEx Query on Composite Provider
Hi,
We have a BW on-HANA system, patch level SAPKW73105.
We have created a Composite provider based on the union of two DSOs, two infoobjects, one SPO, and there are a couple of joins with two other DSOs, on the top of that we built a BEx query.
While executing the BEx query, sometimes (depending on the filter values), We got the following error message
"Attribute engine failed;Error executing physical plan: exception 6900: AttributeEngine/Parallel/DimensionFilter.cpp engine failed; $function$=getValidFemsPA;"
"Error 6,900 has occurred in the BWA/SAP HANA server"
"Error reading the data of InfoProvider @3ZSDRPCP5"
"Error while reading data; navigation is possible"
"Row: 59 Inc: MAP_TREX_EXCEPTION Prog: CL_RSDRH_TREX_STORAGE"
(Attached error message)
Ii We browse the composite provider data using the "display data" option in the RSA1, data is displayed without issue, the problem only appears during the BEx query execution and only with some filter vaues.
Any idea on how to fix the issue.
Thanks,
FedericoHe's on 7.3 EhP1, which is on SPS12 today. It got pretty stable by SP08, SP09. SP05 was pretty early on, and had a lot of bugs in the HANA views.
7.4 is on SP07 like you say, and most of our customers run at least SP06 - before then, you had to apply a bucketload of SAP notes. I would recommend customers apply SP08 with care because it's a feature release so will have a bunch of new features, which will no doubt need corrections. -
Error while executing BEx query made on Multiprovider having Virtual cube
Hi All,
We are getting an error message while executing a BEX query made on Multiprovide which consist of a Virtual Infocube infocube which extracts data from APO Live Cache, the error which we get is as below
''Error Reading the data of the infoprovider ZSS_R054
Error in Substep
Errors have occured while extracting data from datasource 9A_E2E_FC2
Errors occured during parallel processing of query 4, RC:3
Error while reading data; navigation is possible''
And also when tried to execute from RSRT , it gets executed in debug mode in TRY and CATCHE
Please let us know if anyone faced a similar situation or can suggest me what to do.
Please suggest.
Thanking you in advance.
regards,
ajayHi Ajay,
Try RSRV transaction, Select All Elementary Tests, Select query, now drag both these items on the right hand pane, select your query from this popup. and execute.
Let us know what the result is.
regards,
Sree. -
Regarding Error while executing Bex analyzer after execution
HI,
Need in urgent.
I had created a bex query which contains suppose columns A B C(amounts) , Based on this two columns a formula is created F1 = (AB) and F2 = (BC) and F3 = (F1 / F2) now in this case when F2 does not contain any value it is giving "X" in red color. I tried if as " (F2 <> 0 * (F1/F2)) " it is not working, i thing because when I see the out put in the column F2 where their is no value at that place it is not containing "0" (Zero) But contains space.
I have a thought but not able to implement in the formula " (F2 <> Space * (F1/F2)) " But not able to write space.
So is their any way to solve this.Hi,
U mean when F3 = (F1/F2) and F2 is not having any value then you are getting value of F3 as red X. Their is an inbuilt function to avoid this divide by zero problem.
That inbuilt data function is NDIV0(F3), where F3 = Calculated Key Figure.
You can also set how to display the bex values with transaction RSCUSTV4. Here you can set the display setting for following values in Bex Query Designer:
1. Division by 0
2. Does not exist
3. Mixed Values
4. No Authorization
Check out this link:
http://help.sap.com/saphelp_erp2005/helpdata/en/71/0aec3b6e011341e10000000a114084/content.htm
Regards
Raj Rai -
Error while executing BexQuery
Hi all,
I am getting the following error while executing a Bex Query.
SQL Error: 16
SQL Error: 0
Error while reading data; navigation is possible
Can you let me know of any inputs regarding the same ?
Regards
Snehith.hi snehith,
Check whether your infoprovider on which this query is build contains invalid Chars.
thanks -
Error while executing report in query designer
Dear Folks,
I am geting following error while executing report in query designer.
Error:500 E
an exception raised because of 0analysis pattern.
Hence,i am unable to execute any report.
Need help.
ThanksHi Kitu G,
I think this is something to do with the bex web 0ANALYSIS* objects not being installed in your BW system.
I would try and do the following:
- Goto RSA1 > BI Content > BEx Web Template (BTMP)
- Then double-click on Select Object.
- Highlight all objects that start with 0ANALYSIS_PATTERN
- Click on Transfer Selections, and then Install.
If you can't do the above in prd, do it in DEV, then transport the objects to prd.
After all this, try re-running your queries.
Any questions/clarification just let me know
Cheers.
Darwin -
Error while integrating BEx Query with Cognos
Hi all,
we have made 999 rows and 150 columns..
but we r unable to integrate it with cognos if we remove free characteristics....
and it thows me the following error
1.BAP-ERR-0002 a BAPI error has occured in the function module RFC_READ_TABLE. NOT_AUTHORIZED
2.error when generating data provider
3.Query is too large
Please do reply immediately with the correct solution
Regards
MadhaviHi Vani Reddy
Jus one quick finding are there any new patches upgrade taken place in your system . its in generally occurs because patch issues please refer the following note 1325527.
it may helps you in this reg.
Hope its clear a little..!
Thanks
K M R
***Even if you have nothing, you can get anything.
But your attitude & approach should be positive..!****
>
vani reddy wrote:
> Hi All,
>
> While executing Bex Query user is getting below error message after 20 mins and coming out of BEx.
>
>
>
> Error Group
>
> RFC_ERROR_SYSTEM_FAILURE
>
> Message
>
> An exception that could not be cought occured.
>
> Thanks in advance
> Vani
Edited by: K M R on Aug 12, 2009 2:14 PM -
Created a web application but while executing I am facing problem Please help....
Error Message is given below
Error while executing Service RSWAD_WEBPUB_CALL_SERVICE:V for object 1 ()
ThanksHi,
Let me know you have java stack or not?
BEx Web in SAP NetWeaver 2004s (Usage Type BI-Java) requires Usage Types EP and AS-Java
i.e. a Portal on a Java stack is required. This Java stack could be installed on the same server or on another server (see Types of Installation for details).
Please check the note: 917950.
Thanks,
Venkat -
Hi All ,
I got an error while executing a DTP. Short Dump analysis points this error. : DBIF_REPO_SQL_ERROR.
Please provide in your valuable inputs to resolve this error.
Thank & Regards,
Rohit GargThis error comes majorly when you have a deadlock in your code. Check ST22 if you have any short dump corresponding to it and see the source code where it is getting stuck.
If you find this dump explaining table space issue, then contact Basis, they will be able to help you with table space problem.
Edited by: Deepmala Agarwal on Aug 18, 2009 7:40 AM -
error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable.
I am creating many site collections reading records from sharepoint list using powershell in sharepoint online tenant (office 365).
Few site collections are created and then getting above error so this error record will be skipped then few succeeding record processed then again getting error.
pattern is like:
success
success
success
success
Error
success
success
success
success
success
success
error
successHi,
As it is an online environment, to troubleshoot this issue in an easier way, I suggest you contact Office 365 Support to see if there is any useful information in
the log files in the server side:
https://support.office.com/en-us/article/Contact-Office-365-for-business-support-32a17ca7-6fa0-4870-8a8d-e25ba4ccfd4b?ui=en-US&rs=en-US&ad=US
Best regards
Patrick Liang
TechNet Community Support -
Error while executing the script adgetlnxver.sh
Error while executing the script adgetlnxver.sh on apps&db tier during upgrade from 11.5.9 to 11.5.10.2
-bash: [: -lt: unary operator expected
[aptinst@dba5 TINST_dba5]$ sh adapcctl.sh restart
adapcctl.sh version 115.55
/u01/app/tinst/tinstappl/ad/11.5.0/bin/adgetlnxver.sh: line 123: [: -lt: unary operator expected
Apache Web Server Listener :httpd ( pid 8645 ) is running.
Restarting the Apache Web Server Dedicated HTTP Listener..
Apache Web Server Listener (PLSQL) :httpd ( pid 8673 ) is running.
Restarting the Apache Web Server Dedicated PLSQL Listener..
adapcctl.sh: exiting with status 0
In adgetlnxver.sh: line 123 says
if [ ${setflag}x = "x" -a $os = "RH" ]; then
redhatver=`grep -oP "Enterprise Linux [a-z A-Z 0-9]* release [0-9]+" /etc/redhat-release | sed 's/Enterprise Linux [a-z A-Z 0-9]* release //g'`
if [ $redhatver -lt 5 ]; then
LD_ASSUME_KERNEL="2.4.19"
export LD_ASSUME_KERNEL
fi
fi
Thanks,
VamsiHi Vamsi.
The exactly erro refers to a problems when you try upgrade from these version to 11.5.10.
Can you read this note and apply solution? The note refers a patch, but the problem is the same.
After Patch 4334965, adstrtal.sh & adstpall.sh is failing with errors [ID 360046.1]
BR Rafael Ceolim
Maybe you are looking for
-
FBL5N : how to add a column of the Account's name?
Hi, the list displayed by Tcode : FBL5N contain only the number of account, please how to add a column of Account's name ? Please advise Regards.
-
Excise not captured in the MIGO & Tax calculation is not correct in the PO.
Excise Settings completed. 02.11.2007 a) Configuration done as per J05 Building block.( Tax Procedure TAXINN) b) Maintained J1ID, all steps. c) Maintained tax code in FTXP. d) FV11 Maintained for Material, vendor,
-
Sharing one iTunes music and movies folder
Our family iMac is used by 3 people. But I want my brothers to access my iTunes folder instead of having them create their own iTunes playlist and having duplicate songs and taking up space on my iMac. Is there a way for my brothers to access my iTu
-
Need help on how to specify the current select row in a View Object
Hi, I have a ADF table on my page, when I was selecting the rows in this table, I want the set and get methods in the ViewRowImpl class to do some customized actions. I found out that each time regardless the row I select in the table, the viewrowimp
-
Web Server 6.02 Internationalization Question
Hello. I have a problem with WS: it doesn't compile JSP with an error: JSP: JSP1x compiler threw exception java.io.FileNotFoundException: /www/netscape/nextDocs/Acsadm/auth.jsp: Cp1251 at org.apache.jasper.compiler.JspReader.pushFile(JspReader.java:1