Error while executing Crystal report in client computers

I got this error message -2147206460 Crystal Reports Activex Designer invalid directory. any idea guys how can i fix this. I tried using Crystal Report viewer in the server and its working perfectly.
thanks

Michael Litiatco
is your report working on SAP from server machine or it only works on Crystal Report on server machine
IF your report is working on SAP server then, the problem is on sharing the .rpt file with client
Place the .rpt file in shared folder whichi is accessable from all the clients then use that .rpt file in SAP CR addon and update it
updating the path from each client system SAP towards shared .rpt file
do you have any firewall installed, try disabling within your network and check
This should Fix your problem
make sure the printer is shared and correct printer is set as default printer
if possible give a test print page from client to make sure the printer is online
Regards
Krish

Similar Messages

Error while executing the report to display on the web in BI 7.0?

Hi All,
In BI 7.0, Getting Error while executing the report to display on the web?
The error message displayed is:
" Network Access Message : The website cannot be found ".
Source: DNS error.
Why this error is coming.
Wht needs to be done.
Thanks in Advance.

Hi Kishore,
All the configurations are in proper shape.
We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
EP is not configured over here. Is that causing the problem.
Thansk in Advance.

Error while executing the report FAGLB03

Hi,
i am getting the below error while executing the report FAGLB03 and double click on the balances to view the report on line item wise.
There is no active info structure for field catalog SAP_FI_DOC_003
Message no. Q6504
Diagnosis
The system wants to access the Archive Information System. It uses the field catalog SAP_FI_DOC_003 to do this. However, there are no active archive information structures for this field catalog.
Procedure
Create an info structure for field catalog SAP_FI_DOC_003 or activate an info structure for this field catalog.
Please could some one help me on this issue.
Thanks & Regards,
Venkat

Hi,
Please refer the below note.
1361304.
Reg
Madhu M

We are facing error while executing Bex report.

Hi Gurus:
We are facing error while executing Bex report.
Messge :
u201CQuery 0: Runtime error program state check for conversation 05284411 / CP with parallel processing via RFC
Message no. DBMAN428u201D
The query is based upon Multiprovider (based upon 2 basic cubes).
Both cubes are partitioned by info object 0CALMONTH, (valid range - 01.2005 - 012.2010).
Those cubes are not containing any non-cumulative key figures and Service package level for SAP NetWeaver BI 7.0 is u2018SAPKW70012u2019.
I have checked those cubes in RSRV and carry out following steps:
"All Elementary Tests -> Transaction Data" and execute the repair "Consistency of the Time Dimension for an Info Cube"
I have found system inconsistency like u201CRecord with the DIMID 2 contains non-fitting time characteristics u201C
Detail ERROR:
Record with the DIMID 2 contains non-fitting time characteristics
Message no. RSCV053Diagnosis
The data record of the time dimension table with the described DIMID contains values for time characteristics that do not fit together.
I have found the u2018 Note 1130450 - Query displays error DBMAN 284; RSRV: Time dimension checku2019 for this but still not sure this will work or not .
I tested this in dev server , didn't feel useful.
Could you please let us know what to correct this error.
Anwser will be rewared.
Regards,

>
Surendra Pande wrote:
> Anwser will be rewared.
> Regards,
Go read the RULES of these forums.

Error While running crystal report

Dear All,
i have some crystal reports in SAP.while opening any crystal report its through some error like "Error While running crystal report ".
Kindly suggested me how to do this .
Thanks&Regards,
P.Pratap

Hi All,
Thanks for your reply,
already i close this Issue.
they have one addon for crysatl report .so it show error like Error while Running crystal report
thanks&Reagrds,
P.Pratap

ORA-27092 Error while executing any query from client

Hello
I am getting following error while executing any query from client remotly.
IAMDBA@TEST_OAT.ABCD > select userid from dual;
select userid from dual
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01116: error in opening database file 1
ORA-01110: data file 1: '/u01/prod/system/system01.dbf'
ORA-27092: size of file exceeds file size limit of the process
Additional information: 131071
Additional information: 286209
But while local connection,its working.

hi,
ulimit command- Limit user resources
su - oracle
ulimit -n (this command will show you the current value for ulimit the default value is 1024)
to increase its value:---
ulimit -n <some value> ( this command will change value for current session only)
example
ulimit -n 101062
once done check the value as:--
ulimit -n( for verification)
search in google for more explanation or revert back to me for any suggestions.... :)
Edited by: varun4dba on Jan 31, 2011 4:09 PM

Getting Error while integrating Crystal reports with Java

Hi All,
I am getting below error while integrating crystal report with java
[java] os.arch = x86
[java] java.lang.NoSuchMethodError: com.crystaldecisions.Utilities.d.<init>
(Ljava/awt/Image;I)V
[java] at com.crystaldecisions.Utilities.af.try(Unknown Source)
[java] at com.crystaldecisions.Utilities.af.a(Unknown Source)
[java] at com.crystaldecisions.Utilities.af.<init>(Unknown Source)
[java] at com.businessobjects.crystalreports.viewer.applet.g.a(Unknown
Source)
[java] at com.crystaldecisions.ReportViewer.ReportViewer.start(Unknown
Source)
[java] at ReportViewerFrame.<init>(ReportViewerFrame.java:51)
[java] at JRCViewReport.launchApplication(JRCViewReport.java:29)
[java] at JRCViewReport$1.run(JRCViewReport.java:50)
[java] at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:
178)
[java] at java.awt.EventQueue.dispatchEvent(EventQueue.java:443)
[java] at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDi
spatchThread.java:190)
[java] at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDisp
atchThread.java:144)
[java] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.j
ava:138)
[java] at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.j
ava:130)
[java] at java.awt.EventDispatchThread.run(EventDispatchThread.java:98)
Any help can be appreciated
Kalyan

Hi All,
For got to mention i am using crystal reports XI release 2 with JDK1.4.
Kalyan

Database Error While Viewing Crystal Report In Infoview

Hi,
BO and Crystal Designer version is BO XI 3.1 SP2 FP2.6.
Issue:
While viewing crystal report for a particular user id in infoview, following error is coming:
Error in File EPACertificate.rpt: Database Connector Error
However, we are able to view the report in thick client Crystal Designer using same user id. This issue is occurring only for this user and rest of the users are able to view the report in Infoview and Crystal Designer.
It would be great if any of you can provie a solution to this issue.
Thanks in advance,
Jaya

closing it.

Error while executing a report

Hi ,
I have a problem while executing a report to brower as ..
ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
ABEND: System error in program SAPLRRI2 and form REP_QUELL_MOVE_01-01-
The same query is execting in DEV, but it is not working in QA, it is showing the above message. Can you please send me some idea, how to solve this problem.
In my reporting i am using 2 keyfigures, 2 formulae, 2 time char and 1 char.
Thanks and Regards
Rajesh

Hello,
Open the query in query designer and check the query and see wht detailed error message you get.
Regds,
Shashank

Invalid Key code Error while installing crystal report server 11

While installing crystal report server 11,i am facing an erro which says Invalid Key code Error.I had raised this issue to SAP customer support and attaching the conversation that we had.PLEASE HELP me to resolve the issue.
MAILS--Dear Mohit,
Thanks for the patience.
We have received the below update from the Licensing Team.
You received your permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
You did not purchase these licenses for Crystal Reports Server, but purchased it for Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but you elected to use version XI instead and received key .
You would need to enroll the licenses in maintenance if you want to upgrade them.
In case of any queries please create a ticket via the Service Market Place.
Regards,
Jessy
Customer Interaction Center
SAP Active Global Support
Hello Jessy,
The customer received their permanent key in respect of these licenses - the key is for Crystal Reports Server XI.
They did not purchase these licenses for Crystal Reports Server, they purchased Crystal Reports and a 5-named user license for Crystal Reports was included as a special offer. The software included was version XIR2, but they elected to use version XI instead and they received key .
They cannot decide to upgrade now - they must enrol these licenses in maintenance if they want to upgrade them.
Kind regards,
Rosemary
From: BOSAPASIA
Sent: 29 September 2009 05:49
To: Savage, Rosemary
Subject: FW: Crystal Reports Server Installation Issue
Importance: High
HI Rose ,
Need your assistance on the below issue.
Customer purchased Crystal Report Server XI R2 in 2005. When he is trying to install it now, he is getting an Invalid Key code Error.
He has provided us the Scanned copies of the Key code and the registration number.Can you please help and check if he can be provided with a Keycode.
Regards,
Jessy
CIC Team Lead
Customer Interaction Center
Global Support Centre India
SAP Labs India Pvt Ltd
Hi,
Providing you with the required details to proceed further
Registration Number-
Registration Email Address-taxmantra.support
And also please find attached the scanned copy of the Registration key we got for the Crystal report server.
Dear Mohitk,
Thank you for your information.
I checked with the concerned colleague and received the below update:
Please check from where you got this key code. If from a paper, please scan it to us. Please let them track to the original paper or email.
If you have registered the key code, please provide us the registration number or registration email address so that we will try to check for you.
If you did not register before, as the promotion is over so the key code could not be replaced.
I request you to kindly check the same at your end and revert with the details.
Moreover, there are two ways for Crystal Report customer to get support.
One is customer with bundled product such like BOE and under maintenance. These customers will have an S-user ID and password to log a case in service market place via http://service.sap.com/message
A learning map was provided, listed on left column.
The other is customer with only Crystal report product, the support is via SDN.
http://service.sap.com =>Crystal Reports and Xcelsius Support=>Crystal Reports and Xcelsius Forums
Customers can first check whether other customer has got the same issue and find the reply from our engineers.
You may also post your own thread for support.
Anything else I could help, please do not hesitate to contact again.
Hi,
I am providing you with the details required to resolve the issue related to Crystal report installation,for reference of the issue please refer the mail below.
Please find attached the Scanned Document containing the details as per the details required by you.
Hope to see a quick resolution for the issue.
Dear Mohit,
Thank you for your e-mail.
As discussed, I understand that youu2019ve procured Crystal Reports Server 11 in 2006. However youu2019re facing issues with key codes while reinstalling the same. We request you to kindly provide us with below details for further assistance.
Your customer number:
Your customer name and address:
Purchase order number:
Any other products purchased along with Crystal Reports Server 11
Any S-User Id:
Any old case ID:
Please feel free to contact us if any further queries.
Hi,
I am raising this concern on behalf on Taxmantra project (Tata Consultancy Services noida).
We have bought licensed Crystal Reports Server 11 near by 2006.We are trying to install the crystal server but while installing ,we have encountered with an error message that:-
"The product key code you have entered is incorrect"
We are facing the same issue in 2006,I am attaching with this email the conversations that was held in 2006 to get the correct key code.
Please help us to resolve the issue as early as possible.
My contact number:
If you need any further information do let me know

Ajit,
By design, the product is not able to be installed under the superuser account.
1. Create a new user and specify a home directory for the user without a quota set.
2. Copy or move the installation files to a directory that the new user can read. I suggest you move the installation files directly into the new user's home directory.
3. Logon as the new user (or su - newuser)
4. run the installation shell script using that new user's account.
NOTE: Ensure the system meets the requirements from the supported platforms documents.
.Tony

Error while loading Crystal report

Professionals'
I have encountered an error while opening a crystal report 2008, I am using VB.NET 2005 with Business One. When I am running the source code it works fine. With ARD I am getting problem "Crystal report can not open". What should be the solution for that? I made ARD with all the required reports and added all DLL required for it.. Is it required to add any crystal report reference when creating ARD?
Thanks.

Hi,
Are you checking the Addon in the Client or in the Working Machine....?
if it is client Machine install the Crystal Runtime and Check it out....
With Regards,
Madhu

While executing crystal report in visual studio getting hresult 0X80131515

I am working on visual studio 2010..windows form application i am try to create one crystal report.but while executing am getting
error like this:
Then I added crdb_adoplus.dll to
my refernce.but then also am getting same erro my Target Frame work is .Net
FrameWork 4
while coming to this line:
rpt.SetDataSource(ds.Tables(0))
what is wrong? how i can resolve this issue?

Hi jaseem0712,
Please ask this question on SAP Crystal Report forum instead of here:
http://scn.sap.com/community/crystal-reports/content
Regards,
Barry Wang
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Getting a 'Runtime Error' while launching Crystal Reports

Hello
I have Crystal Report XI R2 installed on an XP machine. However, while launching it, I get the following error:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program ...am Fils\Business Objects\Crystal Reports 11.5\crw32.exe
This application has requested the Runtime to terminate it in an unusual way.
Please contact the application's support team for more information.
Any help would be appreciated.
Thanks,
Alok.

Hi Alok
Are you logged in as Administrator?
If not try logging in as Administrator,is still the issue persists then you need to manually uninstall Crystal Reports and reinstall it again.
This issue happens because the installation of Crystal Reports has not been successful, despite a message stating that it has been successfully installed.
Manual Uninstalling Process:
Symptom
Crystal Reports XI is installed on your computer. You need to manually uninstall Crystal Reports XI for one of the following reasons:
u2022 To verify that all Crystal Reports XI components have been completely removed prior to installing a later version of Crystal Reports.
u2022 To remove the remaining Crystal Reports XI components that have not been removed using the 'Add/Remove Programs' command (Start > Settings > Control Panel).
u2022 To remove the remaining Crystal Reports XI components that have not been removed using the Setup.exe file from Crystal Reports XI installation CD.
How do you manually uninstall Crystal Reports XI?
Resolution
Before getting started, uninstall Crystal Reports XI by launching the Setup.exe file from the installation CD or by using the 'Add/Remove Programs' command. If either of these methods fails to remove all Crystal Reports directories, files and registry keys, then continue with the resolution of this article.
==========
WARNING:
This resolution can be applied if Crystal Reports XI is the only software installed on the computer that uses the Business Objects directories, files and registry keys.
For example, Crystal Analysis, Crystal Enterprise and BusinessObjects Enterprise XI are applications that may share the same directories, files and registry keys.
Removing these directories, files and registry keys may cause other software to function incorrectly.
==========
1. To manually uninstall Crystal Reports XI, delete the following directories:
u2022 C:\Program Files\Common Files\Business Objects\3.0
u2022 C:\Program Files\Business Objects
====================
NOTE:
Do not remove the directory C:\Program Files\Common Files\Business Objects\3.0 if you have BusinessObjects Enterprise XI or Crystal Reports Server XI installed. These files are shared by both applications and removal of these files will cause Business ObjectsEnterprise XI and Crystal Reports Server XI to function incorrectly.
====================
2. Delete the following registry keys:
====================
WARNING:
The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk.
HELP:
For information on how to edit the registry key, view the 'Changing Keys And Values' online Help topic in the Registry Editor (Regedit.exe).
RECOMMENDATION:
It is strongly recommended that you make a backup copy of the registry files (System.dat and User.dat on Win9x computers) before you edit the registry.
====================
u2022 HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\
u2022 HKEY_CURRENT_USER\Software\Business Objects\Suite 11.0\Crystal Reports
u2022 HKEY_USERS\S-#-#-##-...-####\Software\Business Objects\Suite 11.0\Crystal Reports
(The number signs (#) represent a series of numbers that are different on each computer.)
====================
NOTE:
After making changes to the registry, restart the affected service or application as required.
====================
Hope this Helps,
Shraddha

Error while executing webi report

Hello Experts,
I created a universe using SAP BI query. Now I am using this query to create webi report. so while creating webi report i select 1 characteristics and 1 key figure from the universe and putting them on result objects pane.
After putting these object when I execute the report i get following error:
Database error: SOFA Driver : Catastrophic failure. Contact your Business Objects administrator or database supplier for more information. (Error: WIS 10901)
Can anyone suggest me how to resolve this error?
Regards,
Nirav Shah

yes, underlying queries work perfectly fine. Universe are created without any issue. However,in WebI, when I drag the any TWO objects under any class or even combination of one object and one measurement key, as soon as I refresh query, the error pops up. If there is JUST ONE object, no issue at all. I can see the data.
Mean...if there is more than one object in any WebI report, the error is thrown by WebI report. And this happens only while running WebI against SAP BW/BI, query or against any InfoCube.
Thanks

Error while executing WAD report

Hi Gurus,
While executing the wad report in the web getting an error, can u brief me, and provide me any step by step procedure for WAD template creation
Reference to data provider "%NM%" is invalid
In the Web Application Designer, create a data provider with the name %NM% in template ZDEMO_WAD, or change the reference to the data provider in Web item ANALYSIS_ITEM_1
DROPDOWN_ITEM_1
No reference To data provider defined
In the Web Application Designer, set parameter DATA_PROVIDER_REF in template ZDEMO_WAD for Web item DROPDOWN_ITEM_1 to a valid data provider

can u brief me, and provide me any step by step procedure for WAD template creation
I believe you have already posted a Q on Dashboards
Re: DashBords
& many have responded with documentation links that can help. I suggest you take time to go thru' the links.
Reference to data provider "%NM%" is invalid
In the Web Application Designer, create a data provider with the name %NM% in template ZDEMO_WAD, or change the reference to the data provider in Web item ANALYSIS_ITEM_1
You need to first create a Data Provider, say DP1, on either an InfoProvider/Query/QueryView to be able to bind it to any webitem in a WAD template. Once created, assign DP1 to ANALYSIS_ITEM_1 under Data Binding properties.
No reference To data provider defined
In the Web Application Designer, set parameter DATA_PROVIDER_REF in template ZDEMO_WAD for Web item DROPDOWN_ITEM_1 to a valid data provide
Create DP2 first & then have it assigned to the DROPDOWN_ITEM_1 under Data Binding properties.

Error while executing Crystal report in client computers

Similar Messages

Maybe you are looking for