Error while executing mapping with 500 K records

Hi,
I have a mapping which has couple of transformation operators (Procedures) and some joiners and a splitter. The operation mode is set based fail over to row based. The target is set to update/insert. The target has about 20 fields.
I am loading about 500k records from source to target. I get the following error"
unable to extend segment by 4 in undo tablespace". My DBA has set 14 gigs space for the tablespace.
Can anybody provide pointers/ideas why this is happening and how can I overcome this.
My target and source are on Oracle 10g R2 and OWB is also 10g R2.
Thanks a lot in advance!
Maruthi

Hi, Maruthi!
Running OWB 10.1.0.4 on an Oracle 10gR1 database we had similar problems with UNDO tablespaces.
One reason could be that the UNDO tablespace is too small, but 500K rows with 20 columns do not seem very large to me (of course it depends on the column types, but I suppose they are mainly some NUMBERs, VARCHARs or DATEs).
You could use TOAD to have a quick look at the tablespaces or use the following statement:
SELECT *
FROM dba_data_files
WHERE tablespace_name = 'SYS_UNDO';
Another reason could be improper UNDO Management settings.
You should contact the DBA to check them to fit the application's requirements.
Regards,
Günther

Similar Messages

Error while executing Initialize with Data Transfer for 0FI_GL_10

Hello All,
Post Pre prod refresh, our timestamp for the datasource 0FI_GL_10 got reset. Due to which our deltas did not bring any records to the BW system.
First we did an Initialize without data transfer for all the BW related datasources. The deltas were then set properly for all datasources except 0FI_GL_10.
We then raised a message to SAP and they suggested to run the 'Initialize with data transfer' for 0FI_GL_10 so that the timestamp is set and accordingly the deltas are fixed.
The issue now is we are getting the following error message while running INIT with data transfer.
Job terminated in source system --> Request set to red
Message no. RSM078
We have copied the data till July 1st week of 2011.
Please advice. The issue is very critical.
Thanks & Regards
Sneha

Hi Arvind
Thanks for your inputs.
Please find below the details of the short dump.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Date and Time          09/07/2011 11:25:32
Short text
     SQL error in the database when accessing a table.
What can you do?
     Note which actions and input led to the error.
     For further help in handling the problem, contact your SAP administrator
     You can use the ABAP dump analysis transaction ST22 to view and manage
     termination messages, in particular for long term reference.
How to correct the error
     Database error text........: "ORA-01652: unable to extend temp segment by 128
      in tablespace PSAPTEMP"
     Internal call code.........: "[RSQL/FTCH/FAGLFLEXT ]"
     Please check the entries in the system log (Transaction SM21).
     If the error occures in a non-modified SAP program, you may be able to
     find an interim solution in an SAP Note.
     If you have access to SAP Notes, carry out a search with the following
     keywords:
     "DBIF_RSQL_SQL_ERROR" "CX_SY_OPEN_SQL_DB"
Information on where terminated
    Termination occurred in the ABAP program "GP_GLX_FAGLFLEXT" - in
     "FETCH_TO_ISTRUCTURE".
    The main program was "SBIE0001 ".
    In the source code you have the termination point in line 903
    of the (Include) program "GP_GLX_FAGLFLEXT".
    The program "GP_GLX_FAGLFLEXT" was started as a background job.
    Job Name....... "BIREQU_4N3PZQ12IA0X0PYGEA85IG39S"
    Job Initiator.. "BIWREMOTE"
    Job Number..... 11203300
    The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
    procedure "FETCH_TO_ISTRUCTURE" "(FORM)", but it was neither handled locally
     nor declared
    in the RAISING clause of its signature.
    The procedure is in program "GP_GLX_FAGLFLEXT "; its source code begins in line
    840 of the (Include program "GP_GLX_FAGLFLEXT ".

Error while executing bts_ConfigureBizTalkLogShipping with SQL Server 2012 and BTS 2013

Hi,
while configuring the DR site for Log shipping (http://msdn.microsoft.com/en-us/library/aa560961(v=bts.10).aspx)
exec bts_ConfigureBizTalkLogShipping @nvcDescription = '<MyLogShippingSolution>',
@nvcMgmtDatabaseName = '<BizTalkServerManagementDatabaseName>',
@nvcMgmtServerName = '<BizTalkServerManagementDatabaseServer>',
@SourceServerName = null, -- null indicates that this destination server restores all databases
@fLinkServers = 1 -- 1 automatically links the server to the management database
Getting errors while trying to execute the stored procedure "bts_ConfigureBizTalkLogShipping".
OLE DB provider "SQLNCLI11" for linked server "(null)" returned message "Login timeout expired".
OLE DB provider "SQLNCLI11" for linked server "(null)" returned message "A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible.
Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online.".
Msg -1, Level 16, State 1, Line 0
SQL Server Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF].
This is very strange because with the same server name (which I am passing in above query) I am able to connect from SQL Server Studio from DR site.
Any help would be much appreciated.
Thanks!
Regards,
Gautam
Thanks! Regards, Gautam

You need to check the DTC Connectivity between your DC and DR SQL Instance. The Linked Server requires DTC connectivity. Secondly this activity is better done from the SQL Server in question (the DC server in your case).
You can also manually add the Linked Server. Refer
http://msdn.microsoft.com/en-IN/library/ms188279(v=sql.105).aspx - Linking Servers and
http://msdn.microsoft.com/en-IN/library/ff772782(v=sql.105).aspx - Creating Linked Servers.
After having created the Linked Server(s) you can run the log shipping configuration again BUT using @fLinkServers = 0.
Regards.

Error while executing WDA with PDf form

Hi,
when i'm executing WDA with PDF form i'm getting the following error message.
i've checked for Reader credential properties from Basis, they say evething is okay.
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/f2c94a069f44a785b85748e11f82a0/content.htm
what must be theproblem.
Also when i execute other WDA application with PDF it is generating PDF .
pls help.
Error when processing your request
What has happened?
The URL http://dv1d11.corp.abc.pvt:8011/sap/bc/webdynpro/sap/zktest_pdf_try3/ was not called due to an error.
Note
The following error text was processed in the system D11 : WebDynpro Exception: ADS: com.adobe.ProcessingException: Could not retrieve a password for credential: ReaderRights(200,101).
The error occurred on the application server dv1d11_D11_11 and in the work process 2 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: RAISE of program CX_WD_GENERAL=================CP
Method: CREATE_PDF of program CL_WD_ADOBE_SERVICES==========CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/LADOBE==================CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L8STANDARD==============CP
Method: IF_WDR_VIEW_ELEMENT_ADAPTER~SET_CONTENT of program /1WDA/L7STANDARD==============CP
Method: CONV_VIEW_INTO_VE_ADAPTER_TREE of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: SET_CONTENT_BY_WINDOW of program CL_WDR_INTERNAL_WINDOW_ADAPTERCP
Method: RENDER_WINDOWS of program CL_WDR_CLIENT_SSR=============CP
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system D11 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server dv1d11_D11_11 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 2 in transaction ST11 on the application server dv1d11_D11_11 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 100 -u: 09039694 -l: E -s: D11 -i: dv1d11_D11_11 -w: 2 -d: 20081007 -t: 162655 -v: RABAX_STATE -e: UNCAUGHT_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team

When you tried other WDAs with PDFs, where they interactive PDFs? The reader rights are only needed for interactive PDFs.
>WebDynpro Exception: ADS: com.adobe.ProcessingException: Could not retrieve a password for credential: ReaderRights(200,101).
That error message would sure to seem to point that the credentials are not accessible to the user that ADS webservice call is being made by. That would certainly seem to me to point to a configuration problem at the Basis level.

Error while executing Query with Variable.

Hi All,
I have written a query to fetch values from some user tables and sap tables. The query is as below.
select a.docentry,a.u_scname,e.block,e.[City],
e.[Country], e.[State1],
e.[StreetNo], e.[ZipCode],
e.[Building], e.[Cellular],a.[U_WONo], a.[U_DocDate],
a.[UserSign], b.[LineId], b.[U_Des],
b.[u_SDes], b.[U_UoM],
b.[U_Qty], b.[U_Rte],
b.[U_Tamt], a.[U_PrjName], a.[u_WO_PB],
a.[U_WO_UL], a.[U_WO_FC],
a.[U_WO_PYT], a.[U_WO_COP],
a.[U_WO_TRMT], a.[U_WO_DocSub],
a.[U_WO_ADV], a.[U_WO_OCondition],
a.[U_WO_PRPBY], a.[U_WO_RCMBY],e.[CntctPrsn],
(T4.[WhsName]+ '-' + T4.[Street] +'-' + T4.[Block]) as 'Work Address ',
T4.[Building], T4.[City],
T4.[ZipCode], T4.[U_PMCNT], T4.[WhsName], e.Taxid0
from [@e360_owor] as a join [@e360_wor1] as b
on a.docentry = b.docentry
left outer join
( select c.cardname,d.TaxId0,d.Taxid1, c.block, c.[City],
c.[Country], c.[State1],
c.[StreetNo], c.[ZipCode],
c.[Building], c.[Cellular], c.[CntctPrsn] from ocrd
as c join crd7 as d on c.cardcode = d.cardcode
where d.TaxId0 is not <b>null</b> ) as e
on
a.U_SCName = e.CardName
left outer join OWHS T4 on T4.[WhsName] = a.[U_Prj]
where
a.U_WONo = '[%0]'
In this code, when the variable is assigned to field U_WONo, then I get an error
Must Specify A Table To Select From. Statement 'Service Contractors' (OCTR) (s) could nto be prepared.
But when the values for variables are hard coded, the query executes.
I have been working on it from long time, but same error exists. Could anybody help resolve the same...
I am using SAP B1 2007 B, patch level 15.
Thanks in advance,
Regards
Rohan

The error messages may be misleading. With complicated queries with parameter request I frequently saw references to service contract (or something other).
Sometimes SBO does not manage correctly variables in complicated queries and there is a note about the workaround to solve the problem:[Note730960|https://websmp130.sap-ag.de/sap/bc/bsp/spn/sapnotes/index2.htm?numm=730960]

Error while executing operation mapping

Hi All,
I am getting the below the error , while executing the Operation mapping, whereas the same payload
working fine with message mapping. Please suggest.

Hi Chandra,
Please refer to mark's comment provided in below thread:
Unable to display tree view
Regards,
Akshay

Error while executing SDM process phase with action DEPLOY_SLOT

Hi,
I am upgrading CRM 2007 to CRM 7.0 and got an error in Java side.
Following is DEPLOY_SLOT_1_DON_01.LOG
<!LOGHEADER[START]/>
<!HELP[Manual modification of the header may cause parsing problem!]/>
<!LOGGINGVERSION[1.5.3.7185 - 630]/>
<!NAME[C:\usr\sap\jupgrade\log\DEPLOY_SLOT_1__DON_01.LOG]/>
<!PATTERN[DEPLOY_SLOT_1__DON_01.LOG]/>
<!FORMATTER[com.sap.tc.logging.TraceFormatter(%24d %s: %m)]/>
<!ENCODING[UTF8]/>
<!LOGHEADER[END]/>
May 20, 2009 4:15:48 AM Info:
May 20, 2009 4:15:48 AM Info: ============================================
May 20, 2009 4:15:48 AM Info: = Starting to execute command 'deploy' =
May 20, 2009 4:15:48 AM Info: ============================================
May 20, 2009 4:15:48 AM Info: Starting SDM - Software Deployment Manager...
May 20, 2009 4:15:49 AM Info: tc/SL/SDM/SDM/sap.com/SAP AG/7.0103.20081105085605.0000
May 20, 2009 4:15:51 AM Info: SDM operation mode successfully set to: Standalone
May 20, 2009 4:15:52 AM Info: Initializing Network Manager (50017)
May 20, 2009 4:15:52 AM Info: Checking if another SDM is running on port 50018
May 20, 2009 4:15:53 AM Info: -
Starting deployment -
May 20, 2009 4:15:53 AM Info: Error handling strategy: OnErrorSkipDepending
May 20, 2009 4:15:53 AM Info: Prerequisite error handling strategy: OnPrerequisiteErrorStop
May 20, 2009 4:15:53 AM Info: Update strategy: UpdateLowerVersions
May 20, 2009 4:15:53 AM Info: Starting deployment prerequisites:
May 20, 2009 4:15:55 AM Info: Loading selected archives...
May 20, 2009 4:15:55 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\ADSSAP03_0.SCA'
May 20, 2009 4:16:43 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIBASES16_0-10003477.SCA'
May 20, 2009 4:16:48 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIIBC16_0-10003495.SCA'
May 20, 2009 4:16:50 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIREPPLAN16_0-10002878.SCA'
May 20, 2009 4:17:00 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIWDALV16_0-10003475.SCA'
May 20, 2009 4:17:02 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\BIWEBAPP16_0-10003476.SCA'
May 20, 2009 4:17:13 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\BIMMR03_0.SCA'
May 20, 2009 4:17:24 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\BIUDI03_0.SCA'
May 20, 2009 4:17:31 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\BPCRMAPP02_0.SCA'
May 20, 2009 4:17:35 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\BPCRMFND02_0.SCA'
May 20, 2009 4:17:37 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CAF03_0.SCA'
May 20, 2009 4:18:02 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CAFKM03_0.SCA'
May 20, 2009 4:18:04 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CAFUM03_0.SCA'
May 20, 2009 4:18:08 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CRMAPP02_0.SCA'
May 20, 2009 4:18:09 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\CRMFND02_1.SCA'
May 20, 2009 4:18:10 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\DICBS16_0-10003500.SCA'
May 20, 2009 4:18:13 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\DICMS16_0-10003499.SCA'
May 20, 2009 4:18:20 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\DIDTR16_0-10003501.SCA'
May 20, 2009 4:18:26 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\EPPSERV03_0.SCA'
May 20, 2009 4:18:43 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\EPWDC03_0.SCA'
May 20, 2009 4:18:45 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\EPBC203_0.SCA'
May 20, 2009 4:18:50 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\KMKWJIKS03_0.SCA'
May 20, 2009 4:18:51 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\KMCBC03_0.SCA'
May 20, 2009 4:18:56 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\KMCCM03_0.SCA'
May 20, 2009 4:19:03 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\KMCCOLL03_0.SCA'
May 20, 2009 4:19:10 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\LMPORTAL03_0.SCA'
May 20, 2009 4:19:12 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\LMTOOLS03_01.SCA'
May 20, 2009 4:19:43 AM Error: There is already a component of the same type with identical name 'tc/cts/appl' and vendor 'sap.com' selected.
May 20, 2009 4:19:43 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\NETPDK03_0.SCA'
May 20, 2009 4:19:45 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\RTC03_0.SCA'
May 20, 2009 4:19:48 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\RTCSTREAM03_0.SCA'
May 20, 2009 4:19:49 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SAPCRMAPP02_1.SCA'
May 20, 2009 4:20:55 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SAPCRMDIC02_0.SCA'
May 20, 2009 4:21:00 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SAPEU03_0.SCA'
May 20, 2009 4:21:39 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SAPSHRAPP02_0.SCA'
May 20, 2009 4:23:18 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\SWLIFECYCL03_0.SCA'
May 20, 2009 4:23:24 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\UMEADMIN03_0.SCA'
May 20, 2009 4:23:27 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\UWLJWF03_0.SCA'
May 20, 2009 4:23:33 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCBASE03_0.SCA'
May 20, 2009 4:23:37 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCFLEX03_0.SCA'
May 20, 2009 4:23:54 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCFRAMEWORK03_0.SCA'
May 20, 2009 4:23:58 AM Info: Loading archive '
nbg-dev-cd1\sapmnt\trans\EPS\in\VCKITBI16_0-10003603.SCA'
May 20, 2009 4:23:59 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCKITGP03_0.SCA'
May 20, 2009 4:24:00 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\VCKITXX03_0.SCA'
May 20, 2009 4:24:02 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\WDEXTENSIONS03_0.SCA'
May 20, 2009 4:24:05 AM Error: Error while loading selected archives.
May 20, 2009 4:24:05 AM Error: Prerequisites were aborted.
May 20, 2009 4:24:13 AM Error: Error while loading selected archives.
May 20, 2009 4:24:13 AM Info: Summarizing the deployment results:
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\ADSSAP03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIBASES16_0-10003477.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIIBC16_0-10003495.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIREPPLAN16_0-10002878.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIWDALV16_0-10003475.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\BIWEBAPP16_0-10003476.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\BIMMR03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\BIUDI03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\BPCRMAPP02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\BPCRMFND02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CAF03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CAFKM03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CAFUM03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CRMAPP02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\CRMFND02_1.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\DICBS16_0-10003500.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\DICMS16_0-10003499.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\DIDTR16_0-10003501.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\EPPSERV03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\EPWDC03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\EPBC203_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\KMKWJIKS03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\KMCBC03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\KMCCM03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\KMCCOLL03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\LMPORTAL03_0.SCA
May 20, 2009 4:24:13 AM Error: Precondition violated: C:\usr\sap\jupgrade\data\archives\LMTOOLS03_01.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\NETPDK03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\RTC03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\RTCSTREAM03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SAPCRMAPP02_1.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SAPCRMDIC02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SAPEU03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SAPSHRAPP02_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\SWLIFECYCL03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\UMEADMIN03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\UWLJWF03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCBASE03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCFLEX03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCFRAMEWORK03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial:
nbg-dev-cd1\sapmnt\trans\EPS\in\VCKITBI16_0-10003603.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCKITGP03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\VCKITXX03_0.SCA
May 20, 2009 4:24:13 AM Error: Initial: C:\usr\sap\jupgrade\data\archives\WDEXTENSIONS03_0.SCA
May 20, 2009 4:24:13 AM Error: Processing error. Return code: 4
It appears to me that somehow there is a component conflict:
May 20, 2009 4:19:12 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\LMTOOLS03_01.SCA'
May 20, 2009 4:19:43 AM Error: There is already a component of the same type with identical name 'tc/cts/appl' and vendor 'sap.com' selected.
May 20, 2009 4:19:43 AM Info: Loading archive 'C:\usr\sap\jupgrade\data\archives\NETPDK03_0.SCA'
Is it advisable at all to manually delete the above LMTOOLS03_01.SCA from the location and try again or this will lead to more errors?
Please help ASAP, thanks a lot,
Shival

Following is the trouble ticket information:
Trouble Ticket Report
Upgrade to Enhancement Package 1 SR1 for SAP NetWeaver/ SAP Business Suite 7 SR1
SID................: CD1
Hostname...........: nbg-dev-cd1
Install directory..: c:/usr/sap/CD1
Upgrade directory..: C:\usr\sap\jupgrade
Database...........: SAP DB
Operating System...: NT
JDK version........: 1.4.2_15 Sun Microsystems Inc.
SAPJup version.....: 1.5.6
Source release.....: 700
Target release.....: 700
Current usages.....: AS;EP;EPC;BP-CRM;JCRM;AAS
ABAP stack present.: true
The execution of UPGRADE/UPGRADE/DEPLOY_ONLINE ended in error.
Error while executing SDM process phase with action DEPLOY_SLOT. See C:\usr\sap\jupgrade\log\DEPLOY_SLOT_1__DON_01.LOG for details.
Cannot execute Java process for deployList with parameters C:/usr/sap/jupgrade/tmp/SLOT.DEPLOY.LST.
Return code condition success evaluated to false for process java.exe for action ACTION_DEPLOY_LIST.
More information can be found in the log file C:\usr\sap\jupgrade\log\DEPLOY_ONLINE_DON_01.LOG.
Use the information provided to trouble-shoot the problem. There might be an OSS note providing a solution to this problem. Search for OSS notes with the following search terms:
com.sap.sdt.j2ee.phases.PhaseTypeSDMProcess
com.sap.sdt.ucp.phases.PhaseException
Error while executing SDM process phase with action DEPLOY_SLOT. See C:\usr\sap\jupgrade\log\DEPLOY_SLOT_1__DON_01.LOG for details.
DEPLOY_ONLINE
UPGRADE
NetWeaver Upgrade
SAPJup
Java Upgrade

Error while executing SAP E-Commerce Application with UME system

When attempting to login to the B2B application (http://hostname:port/b2b/init.do), we receive the following error:
Error while executing SAP E-Commerce Application with UME system; try again to log on. If the problem persists, call our hotline.
I checked the defaultTrace log and every time the login page is called the following messages are displayed:
#System.err#sap.com/crm~b2b#System.err#Guest#0##n/a##70cf2ba0756b11df86050003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Error##Plain###com.sap.engine.services.servlets_jsp.server.exceptions.WebIllegalStateException: The output is committed.
#System.err#sap.com/crm~b2b#System.err#Guest#0##n/a##70cf2ba0756b11df86050003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Error##Plain### at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:354)#
another 40 lines of similar text
When a login is attempted, the following messages are appended to the trace file:
#tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#Guest#0##n/a##f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[actionxecution]='begin' [actionclass]='com.sap.isa.user.action.PrepareLoginBaseAction' [path]='/preparelogin'#
tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#USER1#7439##n/a##f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[actionxecution]='end' [actionclass]='com.sap.isa.user.action.PrepareLoginBaseAction' [path]='/preparelogin' [forward]='/login.do' [exectime]='42'#
#tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#USER1#7439##n/a##f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[jcofuncionexecution]='begin' [funcname]='CRM_ISA_SSO_LOGIN_CHECKS' [ashost]='<hostname>' [sysid]='CRM'#
#tracing.isa.runtime#sap.com/crm~b2b#tracing.isa.runtime#USER1#7439##<hostname>_CJM_678801250#USER1#f6384ec0756b11df81380003ba827311#SAPEngine_Application_Thread[impl:3]_0##0#0#Debug##Plain###[jcofunctionexecution]='end' [funcname]='CRM_ISA_SSO_LOGIN_CHECKS' [ashost]='<hostname>' [sysid]='CRM' [exectime]='12'#
I have modified the userid and hostname in the above trace output.
Does anyone know how we can debug this issue further?
Thanks,
Setu

Hi,
Are you using UME login type for your B2B Scenario?
In your B2B XCM setting have you selected UME related login type?
eCommerce Developer

Error while executing DTP

Hi gurus,
Iam trying to extract the data from r/3 using generic extractor the data is loaded into PSA sucessfully, but iam getting following errors while executing DTP.
1.An error occurred while executing a transformation rule:
The exact error message is:
The argument 'EA' cannot be interpreted as a number
The error was triggered at the following point in the program
GP4D35STLXQI3SHIVNQC2FSJ7MB 791
2.The data record was filtered out because data records with the same key
have already been filtered out in the current step for other reasons and
the current update is non-commutative (for example, MOVE). This means
that data records cannot be exchanged on the basis of the semantic key.
Please guide me accordingly.
Regards
Amar.

Hi
While mapping the Qty Fields it is must to add UOM to the Qty Fields and map it with relevant Info Objects.
The Semantic Keys defined at DTP are also has some issues, try to give a dummy key figure if you are using DSO in the data flow as the DSO has the Overwrite mode.
(Choose Semantic Groups to specify how you want to build the data packages that are read from the source (DataSource or InfoProvider). To do this, define key fields. Data records that have the same key are combined in a single data package. This setting is only relevant for DataStore objects with data fields that are overwritten. This setting also defines the key fields for the error stack. By defining the key for the error stack, you ensure that the data can be updated in the target in the correct order once the incorrect data records have been corrected.)
Hope it helps and clear

Gettng Error while executing the procedure(oracle 10.2.0.3.0)

Hi all,
I am getting following error While executing the package .
    PLS-00103: Encountered the symbol "Truncate" when expecting one of
         the following:
         * & = - + ; < / > at in is mod remainder not rem return
         returning <an exponent (**)> <> or != or ~= >= <= <> and or
         like LIKE2_ LIKE4_ LIKEC_ between into using || multiset bulk
         member SUBMULTISET_I have written follwing query in the package body.
EXECUTE IMMEDIATE 'TRUNCATE TABLE FORT ';
EXECUTE IMMEDIATE '
     INSERT INTO FORT (CID,CODE,DESC,SCODE,SES,T_DT,SDN,LANG)
     SELECT
       SERVICES.CID                                                     CID,
       PROFILE.FUCODE                                               CODE,
       TO_DATE(SUBSTR(SERVICES.STAT_CHNG,-7,6),'YYMMDD')   T_DT,
       PHOR.NUM                                                               SDN,
       C_ALL.cLANGUAGE                                      LANG
     FROM
      SERVICES      .....Please give me the solution for this .
Thank y ou
Edited by: user636482 on Apr 10, 2009 1:08 AM

I am getting following errors if I gave " ' " after not null.
LINE/COL ERROR
42/8     PLS-00103: Encountered the symbol "AND" when expecting one of the
         following:
         begin case declare end exception exit for goto if loop mod
         null pragma raise return select update while with
         <an identifier> <a double-quoted delimited-identifier>
         <a bind variable> << close current delete fetch lock insert
         open rollback savepoint set sql execute commit forall merge
         pipe
42/56    PLS-00103: Encountered the symbol "A" when expecting one of the
         following:
LINE/COL ERROR
         ) , * & | = - + < / > at in is mod remainder not rem => ..
         <an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
         LIKE4_ LIKEC_ between || multiset member SUBMULTISET_
         The symbol ", was inserted before "A" to continue.
42/74    PLS-00103: Encountered the symbol "D" when expecting one of the
         following:
         * & - + ; / at mod remainder rem return returning
         <an exponent (**)> and or || multiset
         The symbol "* was inserted before "D" to continue.
LINE/COL ERROR
45/6     PLS-00103: Encountered the symbol "COMMIT"
52/3     PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
         of the following:
         end not pragma final instantiable order overriding static
         member constructor map
         The symbol "static" was substituted for "PROCEDURE" to continue.
85/8     PLS-00103: Encountered the symbol "AND" when expecting one of the
         following:
         begin case declare end exception exit for goto if loop mod
         null pragma raise return select update while with
LINE/COL ERROR
         <an identifier> <a double-quoted delimited-identifier>
         <a bind variable> << close current delete fetch lock insert
         open rollback savepoint set sql execute commit forall merge
         pipe
85/56    PLS-00103: Encountered the symbol "A" when expecting one of the
         following:
         ) , * & | = - + < / > at in is mod remainder not rem => ..
         <an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
         LIKE4_ LIKEC_ between || multiset member SUBMULTISET_
         The symbol ", was inserted before "A" to continue.
LINE/COL ERROR
85/74    PLS-00103: Encountered the symbol "D" when expecting one of the
         following:
         * & - + ; / at mod remainder rem return returning
         <an exponent (**)> and or || multiset
         The symbol "* was inserted before "D" to continue.
88/8     PLS-00103: Encountered the symbol "COMMIT"
95/3     PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
         of the following:
         end not pragma final instantiable order overriding static
LINE/COL ERROR
         member constructor map
         The symbol "static" was substituted for "PROCEDURE" to continue.
133/3    PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
         of the following:
         end not pragma final instantiable order overriding static
         member constructor map
         The symbol "static" was substituted for "PROCEDURE" to continue.
169/3    PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
         of the following:with out adding " ' " I am getting the previous error which I mentioned in Previous thread(TRUNCATE)
Thank you

Error While Executing the Asset history report S_ALR_87011990

Hi,
I am getting the below error while executing the Asset History Report - S_ALR_87011990
No data was selected
Message no. AB064
Kindly advice me

Hi,
Thi may be a authorisation issue. I doubt that it will get recorded in su53 for report executing. Check with basis guy for respective asset class authorization.

Error while executing agent. ORABPEL-05006

Hi:
I have a bpel process waiting until a DbAdapter (with one Wait Activity) reads a record on database, but the problem is :
- The record is in the database
- The DbAdapter read it but the process don´t continue.
- If the process is monitored by the Bpel Console it seems like it is waiting for the expiration of the wait activity, but the expiration time is reached.
When i restart the OC4J_BPEL the process that was waiting , continues.
i was looking the log file of the oc4j and it throws the following exception, could anybody help me??
Thanks
Santiago Velez.
<2006-11-08 13:43:26,871> <INFO> <default.collaxa.cube.ws> <AdapterFramework::Outbound> file:/data2/middle/integration/orabpel/domains/default/tmp/.bpel_PG-ComunicacionATC_1.0.jar/InsertaAtcsComunicados.wsdl [ InsertaAtcsComunicados_ptt::insert(AtcsComunicadosCollection) ] - Using JCA Connection Pool - max size = <unbounded>
<ExpirationJob::execute> Error while executing agent.
An error occured while attempting to execute the job "111499-BpWai0-BpSwt1.22-1" for agent "scheduler". The exception reported was : Dispatcher schedule error.
An error occurred while scheduling a batch message with the dispatcher. The exception is: Failed to create "ejb/collaxa/system/DispatcherBean" bean; exception reported is: "javax.naming.NamingException: Not in an application scope - start Orion with the -userThreads switch if using user-created threads
at com.evermind.server.PreemptiveApplicationContext.getContext(PreemptiveApplicationContext.java:34)
at com.evermind.naming.FilterContext.lookup(FilterContext.java:138)
at javax.naming.InitialContext.lookup(InitialContext.java:347)
at com.collaxa.cube.engine.util.EngineBeanRegistry.lookupDispatcherBean(EngineBeanRegistry.java:137)
at com.collaxa.cube.engine.dispatch.DispatchHelper.scheduleRemote(DispatchHelper.java:348)
at com.collaxa.cube.engine.agents.ExpirationAgent$ExpirationJob.execute(ExpirationAgent.java:417)
at org.quartz.core.JobRunShell.run(JobRunShell.java:141)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:281)
ORABPEL-05006
Dispatcher schedule error.
An error occurred while scheduling a batch message with the dispatcher. The exception is: Failed to create "ejb/collaxa/system/DispatcherBean" bean; exception reported is: "javax.naming.NamingException: Not in an application scope - start Orion with the -userThreads switch if using user-created threads
at com.evermind.server.PreemptiveApplicationContext.getContext(PreemptiveApplicationContext.java:34)
at com.evermind.naming.FilterContext.lookup(FilterContext.java:138)
at javax.naming.InitialContext.lookup(InitialContext.java:347)
at com.collaxa.cube.engine.util.EngineBeanRegistry.lookupDispatcherBean(EngineBeanRegistry.java:137)
at com.collaxa.cube.engine.dispatch.DispatchHelper.scheduleRemote(DispatchHelper.java:348)
at com.collaxa.cube.engine.agents.ExpirationAgent$ExpirationJob.execute(ExpirationAgent.java:417)
at org.quartz.core.JobRunShell.run(JobRunShell.java:141)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:281)
at com.collaxa.cube.engine.dispatch.DispatchHelper.scheduleRemote(DispatchHelper.java:354)
at com.collaxa.cube.engine.agents.ExpirationAgent$ExpirationJob.execute(ExpirationAgent.java:417)
at org.quartz.core.JobRunShell.run(JobRunShell.java:141)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:281)

anybody have comments on this????????????

Error while executing report in query designer

Dear Folks,
I am geting following error while executing report in query designer.
Error:500 E
an exception raised because of 0analysis pattern.
Hence,i am unable to execute any report.
Need help.
Thanks

Hi Kitu G,
I think this is something to do with the bex web 0ANALYSIS* objects not being installed in your BW system.
I would try and do the following:
- Goto RSA1 > BI Content > BEx Web Template (BTMP)
- Then double-click on Select Object.
- Highlight all objects that start with 0ANALYSIS_PATTERN
- Click on Transfer Selections, and then Install.
If you can't do the above in prd, do it in DEV, then transport the objects to prd.
After all this, try re-running your queries.
Any questions/clarification just let me know
Cheers.
Darwin

We are facing error while executing Bex report.

Hi Gurus:
We are facing error while executing Bex report.
Messge :
u201CQuery 0: Runtime error program state check for conversation 05284411 / CP with parallel processing via RFC
Message no. DBMAN428u201D
The query is based upon Multiprovider (based upon 2 basic cubes).
Both cubes are partitioned by info object 0CALMONTH, (valid range - 01.2005 - 012.2010).
Those cubes are not containing any non-cumulative key figures and Service package level for SAP NetWeaver BI 7.0 is u2018SAPKW70012u2019.
I have checked those cubes in RSRV and carry out following steps:
"All Elementary Tests -> Transaction Data" and execute the repair "Consistency of the Time Dimension for an Info Cube"
I have found system inconsistency like u201CRecord with the DIMID 2 contains non-fitting time characteristics u201C
Detail ERROR:
Record with the DIMID 2 contains non-fitting time characteristics
Message no. RSCV053Diagnosis
The data record of the time dimension table with the described DIMID contains values for time characteristics that do not fit together.
I have found the u2018 Note 1130450 - Query displays error DBMAN 284; RSRV: Time dimension checku2019 for this but still not sure this will work or not .
I tested this in dev server , didn't feel useful.
Could you please let us know what to correct this error.
Anwser will be rewared.
Regards,

>
Surendra Pande wrote:
> Anwser will be rewared.
> Regards,
Go read the RULES of these forums.

Full Load: Error while executing :TRUNCATE TABLE: S_ETL_PARAM

Hi All,
We are using Bi Apps 7.9.6.1. Full Load was running fine. But Now we are facing a problem with truncating a table "S_ETL_PARAM".
I have restart informatica Server And also DAC Srever. But still I am getting the same in the DAC Log as, *"NOMALY INFO::: Error while executing : TRUNCATE TABLE:S_ETL_PARAM*
*MESSAGE:::com.siebel.etl.database.IllegalSQLQueryException: DBConnection_OLTP:SIEBTRUN ('siebel.S_ETL_PARAM')*
*Values :*
*Null Map*
*EXCEPTION CLASS::: java.lang.Exception"*
Any Suggestion.....
Thanks in Advance,
Deepak

are you trying to run incremental load when you get this truncate error? can you re-run full load and see that still runs ok? pls also check your DW side database logs like alert lor any DB level issue. such errors do not throw friendly messages in DAC/Informatica side.

Error while executing mapping with 500 K records

Similar Messages

Maybe you are looking for