Error while executing query in BEX

Hi All,
I am experiencing an issue while executing query on FIAR_C03.
"Abort No Values could be determined for variable 0P_FVAEX
Error specify a value for 0P_FVAEX
Abort system error in program SAPLRRKO and form APPEND_KHANDLE_1-01-
I had searched SDN forums and found the similar error which is inculded in the below link:
Bex Variable
However, the solution specified is only for a particular 3 queries. Also the solution is that the 3 queries(Which are having errors) are replaced by another 3 queries.
Can anybody help us in this regard.
Regards
YJ

hi JY,
try 858477 steps for other 'infected' webtemplates ?
try implement correction in 660514 ?
(also search other notes with keyword 0P_FVAEX
e.g 585202)
hope this helps.

Similar Messages

SQl Error while executing query in BEx

Hi All,
We are executing a Report in Bex 7.0 and we get the selection screen once i give the slections and execute it after running for few mins ( say 3 mins), its giving the below error message.
Error Sql: 1578
Error ORA-01578 ORACLe DATA BLOCK Corrupted(file #120, block #21118) ORA.
Errors occured during parallel process of Query 15;RC:3
Error while reading data Navigation is not possible.
I have regenerated the Query in RSRT, but no errors from it.
Other queries are working fine from BEx in the same BW system.
Plaese provide any inputs on this.
Thanks & Regardsm
Ganesh Thota

HI,
Try the below sequence, not sure if it works for you.
Go to query properties
In advance tab
Check the box "Allow external access to this query" and re-execute the query
this might help
regards,
ray

Getting below error while opening query in bex 3.5x

Dear Guru's
I am getting below error while opening query in bex 3.5x
The following object were not found when accesing the server .
Press repair to correct the problem (included parts of query deleted) press cancel to undo the last action.
Regards
Karan

Hi,
1) When a query administrator with the sufficient authorization (sap_all or the * authorization for the field in the authorization object) is creating the query in query designer including the 'attributes' which are not visible with the 'normal' authorizations, the query will not list the columns in the output when it is executed by the normal user.
2) so create an authorization object for each of these attributes with * (full authorization)
Regards,
Marasa.

Web Analysis Error -- Error while executing query and retrieving data

Regarding Web Analysis:
We have a number of reports that we created. yesterday they were all working fine. today we try to open them and most are generating an error.
The error is:
Error while executing query and retrieving data.; nested exception is:
com.hyperion.ap.APException: [1033] Native:
1013033[Thu Oct 22 09:08:17
2009]server name/application name/database name/user name/Error91013033)
ReportWriter exit abnormally
Does anyone have any insight into what is going on?
My version information is:
Hyperion System 9 BI+ Analytic Administration Services 9.3.0.1.1 Build 2
Web Analysis 9.3.0.0.0.286
Thanks in advance for your help.
DaveW

Hi,
And also click on check option by opening the query in Query designer,as Mr . Arun suggested.
And if you get any error in checking, see the long message(detail).
With rgds,
Anil Kumar Sharma .P

Error while executing query in OLAP server

Dear all,
we are using APD to extracted sales data for the last 3 months .this APD was executed perfectly till yesterday.
in today's run APD got failed with error message as below
"@5C\QError@ Fiscal year variant Z3 is not maintained for calendar year 9999
"@5C\QError@ Error while executing query in OLAP server; redesign query.
Please suggest corrective action .
I have tried executing manually with less selections on creation date by no success..
regards,
puru

Purushotham wrote:
Hi Jeeth,
>
> in query we have selection for " currency type " and created on " .we are not using fiscal year variant.
>
> in first strep of APD design only we have a problem and also recently there are no changes to this APD .
>
> It was executed perfectly on till 4th .
>
> Edited by: Purushotham on Feb 6, 2012 12:48 PM
Dear Purushotham, You can maintain the Fiscal year Variant in OB29. 2 possibilities, #1 : Data for the FYV/Year could be wrong. #2 : Updates for Fiscal Year might not have been done. You can maintaine FY varients up to FY 2XXX in your BW system. This should fix the error. The table T009 must be the same as we get when we do OB29 TCode in BW, so via SPRO do rebuild of table again.
Edited by: Arun Bala G on Feb 6, 2012 4:05 PM

ORA-01722: Error while executing query in Query Designer

Hi All;
I am getting the below error while executing a query
ORA-01722: invalid number
Error reading the data of InfoProvider
Error while reading data; navigation is possible
Have anyone encountered this before? How do i resolve this?
Thanks!
~ Arun KK

Hi,
Did you checked all the setting required to run this query are present in the Qualtiy system??
Which means all the characteristics,key figures are in active state.
Also all the cubes are in active state with no issues with the involved in the dimensions used for the query.
Also do a check in the query and if you have authorization try to save the same query and execute the saved one again in quality and see if the same error happens again.
Thanks
Ajeet

Error while executing query through rsrt

hello experts,
I am facing following error while executing one HR query through rsrt.
"System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text) "
while executing query through rsrt it automatically goes to debug mode, coming out of debug mode i get the screan showing above error message.
What would be an issue?
Regards,
Nirav
Edited by: Nirav Shah on Apr 21, 2008 8:19 AM

Hi ramesh,
I havent kept any execlusion selection. Though i saw long text, it is like this:
"Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
Notification Number BRAIN 299 "
Regards,
Nirav

Error while running query in BEx

Hi Experts,
when i am running a query i am getting this error in BEx: "Value 'First NameAPPROVER1' (hex. '004600690072007300740020004E0061006D00650041005000') of characteristic ZZNAME1 contains invalid characters,Error while reading data; navigation is possible
I>> Row: 121 Inc: EXECUTE Prog: CL_RSDRV_SRVS_SID).
Please suggest how to solve the error.
Regards,
AKSINGH

Thanks All,
Problem Solved

Error while executing query after migration

I have migrated a query to 7. While executing the report following error occurs
When I attempt to open a query, (I get past the login and query selection screens) I get the following error:
"Creation of item TEXTELEMENT_xx Failed" (20 or so lines)
After which the variable entry screen pops up, but no data is displayed when the query returns due to the creation of the elements failing.
Excel 2007 Office SP2. SAP GUI 710
Please suggest.
Regards,
Raj.

Hi Raj,
I also faced this problem with Excel 2007 BI
I was able to resolve the problem with the following
This problem is because changes to excel in the 2007
first try reinstalling the GUI components If it works with the reinstallation then its fine
if not try Installing FEP 900 (Latest patch for BEX Suite) and GUI 7.10 patch 13
this definitely solves your problem
Thank you

Error while executing query in SQL Developer

I am getting the following error whenever I login to sql developer.
SEVERE 56 0 oracle.jdbc Error while registering Oracle JDBC Diagnosability MBean.
I get below error whenever I execute any query.
SEVERE 70 53918 oracle.dbtools.worksheet.sqlhistory.SqlHistoryTask oracle.dbtools.worksheet.sqlhistory.db.HistoryDB.readHistory(HistoryDB.java:99)
I use following versions
Java(TM) Platform 1.6.0_35
Oracle IDE 3.2.20.09.87
Versioning Support 3.2.20.09.87
I am working on Oracle11gR2.
Please help me to resolve this and let me know if you need more information.

Got same issue with :
Component
Version
=========
=======
Java(TM) Platform
1.6.0_41
Oracle IDE
3.2.20.09.87
Versioning Support
3.2.20.09.87
Alternate path for SqlHistory directory :
C:\Users\USER_NAME\AppData\Roaming\SQL Developer
Best Regards,
F.L.

CX_SY_NO_HANDLER Error While executing query in RSRT T-Code

Hi Experts,
I have created a data source extraction using function module.
Then i have created customer exit variable, dso, infocube and all....
my variable name is ZWBS_VAR and
        query name is WBS_VAR.
while executing this query name I'm getting the exception CX_SY_NO_HANDLER.
If i use WBS_VAR instead of ZWBS_VAR in when condition.. it is not showing that error.
this is my code i have written in ZXRSRU01 include.
DATA:it_wbs_elemt TYPE STANDARD TABLE OF /bic/awbsdsogn00,
     wa_wbs_elemt like line of it_wbs_elemt,
     L_S_RANGE TYPE RSR_T_RANGESID with header line,
     LOC_VAR_RANGE like line of i_T_VAR_RANGE,
     ZLOW TYPE C,
     LV_USER LIKE SY-UNAME,
     lv_user1 LIKE /bic/awbsdsogn00-/BIC/WBSE.
CASE i_vnam.
*****************************Start of Code for 'ZWBS_VAR' variable******************************
when 'ZWBS_VAR'.
lv_user = sy-uname.
if lv_user CP '/BIC/WBSE'.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = lv_user
IMPORTING
output = lv_user1.
CLEAR wa_wbs_elemt.
SELECT * FROM /bic/awbsdsogn00 INTO TABLE it_wbs_elemt WHERE /BIC/WBSE = lv_user1.
READ TABLE it_wbs_elemt INTO wa_wbs_elemt WITH KEY /BIC/WBSE = lv_user1.
IF sy-subrc = 0.
l_s_range-low = wa_wbs_elemt-/BIC/WBSE.
l_s_range-sign = ' I '.
l_s_range-opt = ' EQ'.
APPEND l_s_range TO e_t_range.
ENDIF.
ENDIF.
ENDCASE.
IF I_STEP = 3.
LOOP at i_t_var_range INTO loc_var_range WHERE vnam = 'ZWBS_VAR'.
CLEAR : l_s_range.
zlow = loc_var_range-low.
lv_user = sy-uname.
CALL FUNCTION 'CONVERSIOn_EXIT_ALPHA_OUTPUT'
EXPORTING
input = loc_var_range-low
IMPORTING
output = loc_var_range-low.
IF lv_user NE loc_var_range-low.
IF lv_user CP '/BIC/WBSE'.
CALL FUNCTION 'RRMS_MESSAGE_HANDLING'
EXPORTING
I_CLASS = 'RSBBS'
I_TYPE = 'E'
I_NUMBER = '000'
I_MSGV1 = 'You are not authorized for the WBS ELEMENT'
I_MSGV2 = loc_var_range-low
I_MSGV3 = 'Enetr your valid WBS ELEMENT'
I_MSGV4 = lv_user
EXCEPTIONS
OTHERS = 02.
RAISE Again.
ELSE.
l_s_range-low = loc_var_range-low.
l_s_range-sign = loc_var_range-sign.
l_s_range-opt = loc_var_range-opt.
APPEND l_s_range TO e_t_range.
ENDIF.
ENDIf.
ENDLOOP.
ENDIF.
If you find any errors in this piece of code please let me know..
Thanks&Regads,
Sirisha.

Hey think other way round .
Filtering the report with the partner(current user executing the report) will suffice your requirement .
Am I correct ?
If yes then follow this simple approach .
Create a variable(mandatory, not ready for input ) of type customer exit on partner infoobject and filter your report with this variable .
In this way the current user executing the report can see data only related to him .
Type the below code in cmod .
WHEN '(give your variable name).
     DATA :lv_bp        TYPE /bi0/oibpartner,
    CHECK i_step EQ '1'.
    lv_bp = sy-uname.
    IF lv_bp IS NOT INITIAL.
      lv_bp = ( sy-uname ) .
      CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
        EXPORTING
          input = lv_bp
        IMPORTING
          output = lv_bp.
      l_s_range-sign = 'I'.
      l_s_range-opt = 'EQ'.
      l_s_range-low = lv_bp .
      APPEND l_s_range TO e_t_range.
      CLEAR : l_s_range,lv_bp.
    ENDIF.
If this approach is not flexible in ur case then let me know will change the code what u have written as I can see many errors in that .
Also I can figure it out that the whole code is ctrl c ctrl v of that sdn document but his requirement was quite different than yours .

Error while executing query at a user

Hello Experts,
I am getting error while previewing the query at one of my user ERROR is: Error while connecting the read-only DB user; check that the read only DB user is assigned to database. 110.
Help Required !

Log in as a super User
Navigate to Authorisations on path
Administration > setup > Authorisation
Navigate to the user facing the issue Navigate to Reports and
Give Full authorization to
Query generator
Query Wizard
Query Manager.
This should resolve your issue.

Error while executing query ORA-00932

Hi I have the following query and its giving error please resolve.....
SELECT DISTINCT acthed,rcptno,depdate,matdate,depamt,intrate,intaccd,intpaid,intpble,paytfreq,instalamt,autrenfg,
curbalnc,curbdrcr,clrbalnc,clrbdrcr,acstatus,lnachd,lnacno,siflag,siacthed,siactnum,catgcode,lastitcal,
tdsflag, tdsamt, tdsdate, tdsint,actnum FROM tdmaster WHERE acstatus = 1
AND fundstat = 'Y' AND acthed = 4016
AND depdate < to_number(trunc('30-SEP-2011','mm') + 22) //Error here //
AND ((lastitcal) < '30-SEP-2011' or lastitcal is null)
ORDER BY depdate ASC;
Please send the executable query....
Thanks in advance...

Hi user11384749,
If the column depdate have date datatype then you may use to_date function to convert text into date then do addition in it:
depdate < (to_date('30-SEP-2011','dd-MM-YYYY') + 22)
this will compare the depdate with 22-OCT-11 date
I hope this will be your answer
Regards,
M.A.Bamboat

Error while executing query

Hi all,
I am not able to execute a report in BEx Analyzer. It keeps asking for userid and password and after that it gives message saying Query not yet calculated. When tried to execute again using the refresh button it disconnects from BW server. (I am typing correct userid and password).
Tried to check for the query that was created. Even the query doesnt open in BEx Query Designer. It gives error message saying - System Error in Program CL_RSD_MULTIPROV and from FACTORY -02.
Program error in class SAPMSSY1 method: UNCAUGHT_EXCEPTION
(This query is built on Multiprovider). I went in the BW system and checked if the Multiprovider and its cubes were inactive. I found that there was no problem with Multiprovider and its cubes. All are in active and executable state.
not sure what the problem is. Do let me know how we can resolve this issue.
Thanks in advance.
Maddy

Hi,
Reason for such error could be that you had some info-object either characteristic or key-figure in your query which now is deleted and since you are trying to open that query it is checking that info-object in source (multi-provider/cube/dso/infoset whatever is applicable in your case) which is not available and hence giving this error.
You need to add that info-object in info-provider on which query is built, ones you add that do necessary modification in query and then remove unwanted info-object from multi-provider.
Regards,
Akshay

Error while executing query on portal-SAPMSSY1 method : UNCAUGHT_EXCEPTION

Hello all,
I have created a quey and executed it on portal and everything just works fine. The query has few input varaibles at the start like fiscal year and some other inputs. I saved the query in my Portal favorites and then when I try to excute it from there it gives me a runtime BI error.
Termination message sent ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION MSGV1: SAPMSSY1 MSGV3: UNCAUGHT_EXCEPTION
I guess it errors out because of the variable input part at the start of query.
We already have note "950992" in the system so wonder what next now.
Any inputs appreciated.
Thanks,
Kiran

We are having the same issue too - we are SP13. Our query is built on a Infoset, and the problem comes with 0FISCPER variable, when we try to do a input help (F4) in Bex. this happens only when I use fiscper on queries bulit on INFOSETS, and it works perfectly alright with all other cubes.
<i>System error in program CL_RSMD_RS_SPECIAL and form
IF_RSMD_RS~READ_META_DATA-02 (see long text)
    Message no. BRAIN299
Diagnosis
    This internal error is an intended termination resulting from a program
    state that is not permitted.
Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template,
    or during interaction in the planning modeler, and if you can reproduce
    this termination, record a trace (transaction RSTT).</i>
    For more information about recording a trace, see the documentation for
    the trace tool environment as well as SAP Note 899572.
and in portal, it gets to the point of variable screen and then throws a error msg.
<i>ABEND RSBOLAP (000): Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
MSGV1: SAPMSSY1
MSGV3: UNCAUGHT_EXCEPTION</i>
Message was edited by:
        voodi
Message was edited by:
        voodi

Error while executing query in BEX

Similar Messages

Maybe you are looking for