Error while executing report in query designer

Dear Folks,
I am geting following error while executing report in query designer.
Error:500 E
an exception raised because of 0analysis pattern.
Hence,i am unable to execute any report.
Need help.
Thanks

Hi Kitu G,
I think this is something to do with the bex web 0ANALYSIS* objects not being installed in your BW system.
I would try and do the following:
- Goto RSA1 > BI Content > BEx Web Template (BTMP)
- Then double-click on Select Object.
- Highlight all objects that start with 0ANALYSIS_PATTERN
- Click on Transfer Selections, and then Install.
If you can't do the above in prd, do it in DEV, then transport the objects to prd.
After all this, try re-running your queries.
Any questions/clarification just let me know
Cheers.
Darwin

Similar Messages

  • Error while executing report from Query designer

    Hi All,
    When I am executing from query designer, I am getting following error.
    Even I can't execute it from another portal where i created source system of BI server.
    But i can execute queriew from Query analyser and t-code RSRT.
    When I execute from Query desinger the url is as follows.
    http://XXX:00/irj/servlet/prt/portal/prtroot/pcd!3aportalcontent!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=0PA_C01_Q0201&VARIABLE_SCREEN=X&DUMMY=5_
    And the error is:
    500 Internal Server Error
      BEx Web Application
    Failed to process request; contact your system administrator
    Information for Administrator
    To avoid this exception see the steps below. To help SAP better investigate this issue, you will need to provide the diagnostic information from these steps.
    1. Most likely, the issue you are experiencing has already been corrected. Please make sure that the most recent patch level is deployed on your system according to notes 1033246 and 1011241. Starting with Support Package Stack 16 patch level 30, BI Java is delivered according to the synchronized delivery process described in the note 1033246.
    2. Please ensure that NetWeaver Business Intelligence Diagnostics & Support Desktop Tool  does not report any issues on your server according to note 937697. You can start it by clicking here (administrator permissions are required).
    3. When opening any customer message on this issue, please attach:
    Support Desktop Tool support info ZIP  file according to note 937697,*
    Required information for reproduction  according to note 948490.*
    Error Summary
    Exception occured while processing the current request; this exception cannot be handled by the application or framework
    If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
    To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
    Root Cause
    The initial exception that caused the request to fail was:
    java.lang.NullPointerException
    java.lang.NullPointerException
    at com.sap.ip.bi.webapplications.runtime.service.metadata.impl.MetadataAccess.getMetadataModel(MetadataAccess.java:139)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.getMetadataModel(Page.java:8953)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.normalizeCommands(Page.java:4963)
    at com.sap.ip.bi.webapplications.runtime.impl.Page.doProcessRequest(Page.java:4473)
    at com.sap.ip.bi.webapplications.runtime.impl.Page._processRequest(Page.java:3316)
    Details: Full Exception Chain
    System Environment
    Server
    BI Java Release: 7 - Patch level: 0000000100 - Description: BI Web Applications Java - Additional info:  - Production mode: true
    BI ABAP unknown
    Java Virtual Machine Java HotSpot(TM) 64-Bit Server VM - Sun Microsystems Inc. - 1.4.2_24-b04
    Operating System SunOS - amd64 - 5.10
    REgards
    Mohan

    Hi mohan ,
      You can check these OSS notes for the issue  .
    1. 795699 - Customizing default error messages for HTTP
    2. 807000 - Http requests are not fully read after timeout
    3. 804124 - HTTP communication with XI Adapter Engine fails
    Regards,
    Lokesh

  • Error while executing the workbook query.

    Hi guyz
    i'm getting an error while executing the workbook Query. The actual problem is there is a filter for REQUID in the query definition for removing the doble count. there is customer exit written. the report works fine in DEVELOPMENT but it is not working in quality.
    The query on which this workbook is created is working fine, but the problem is when we execute the workbook i'm facing this issue.
    we re-transported the queries but still we are facing the same problem.
    while we execute the query we are prompted for variable entry(Optional) for date. when we press OK we get the below error
    " NO SID value found for the value REQU_4DQT75Y2RJPVT4PXZ4LHC70V3 of characteristic"
    the request is not available in the BW system. the request was deleted long back, but it is still referring to the same the request id
    could someone please tell me where we went wrong and why we are getting this error.
    Regards,
    Anil Vadde

    Hey ,I think data load to your target on which the query was based had some issue.
    Can you check the data load to the data target.change the status of request concerned to red and delete.do reconstruct if neeed..I think the request had some issue.
    Even you can go to RSRQ or RSMO and filter on the basis of this request and see its status.
    Regards,
    RK

  • Error while executing report : Error in program CL_RSR_RRK0_CURR

    Hi Gurus,
    I am getting an error while executing a report.This error is only for one date seletion. For other selections report runs fine.Below is the error description & long text.
    Please let me know if you have any solution on this.
    A System error in program CL_RSR_RRK0_CURR and form FILL_CUDIM_02-04.
    System error in program CL_RSR_RRK0_CURR and form FILL_CUDIM_02-04- (see long text)
    Message no. BRAIN299
    Diagnosis
    This internal error is an intended termination resulting from a program state that is not
    permitted.
    Procedure
    Analyze the situation and inform SAP.
    If the termination occurred when you executed a query or Web template, or during interaction in
    the planning modeler, and if you can reproduce this termination, record a trace (transaction
    RSTT).
    For more information about recording a trace, see the documentation for the trace tool
    environment as well as SAP Note 899572
    Thanks,
    Prasanna N.

    Hi Prasanna,
                 Check the below SAp Note:
    SAP Note : 1030657
    Thanks,
    Vijay.

  • Error while executing a sql query for select

    HI All,
    ORA-01652: unable to extend temp segment by 128 in tablespace PSTEMP i'm getting this error while i'm executing the sql query for selecting the data.

    I am having 44GB of temp space, while executing the below query my temp space is getting full, Expert please let us know how the issue can be resolved..
    1. I dont want to increase the temp space
    2. I need to tune the query, please provide your recomendations.
    insert /*+APPEND*/ into CST_DSA.HIERARCHY_MISMATCHES
    (REPORT_NUM,REPORT_TYPE,REPORT_DESC,GAP,CARRIED_ITEMS,CARRIED_ITEM_TYPE,NO_OF_ROUTE_OF_CARRIED_ITEM,CARRIED_ITEM_ROUTE_NO,CARRIER_ITEMS,CARRIER_ITEM_TYPE,CARRIED_ITEM_PROTECTION_TYPE,SOURCE_SYSTEM)
    select
    REPORTNUMBER,REPORTTYPE,REPORTDESCRIPTION ,NULL,
    carried_items,carried_item_type,no_of_route_of_carried_item,carried_item_route_no,carrier_items,
    carrier_item_type,carried_item_protection_type,'PACS'
    from
    (select distinct
    c.REPORTNUMBER,c.REPORTTYPE,c.REPORTDESCRIPTION ,NULL,
    a.carried_items,a.carried_item_type,a.no_of_route_of_carried_item,a.carried_item_route_no,a.carrier_items,
    a.carrier_item_type,a.carried_item_protection_type,'PACS'
    from CST_ASIR.HIERARCHY_asir a,CST_DSA.M_PB_CIRCUIT_ROUTING b ,CST_DSA.REPORT_METADATA c
    where a.carrier_item_type in('Connection') and a.carried_item_type in('Service')
    AND a.carrier_items=b.mux
    and c.REPORTNUMBER=(case
    when a.carrier_item_type in ('ServicePackage','Service','Connection') then 10
    else 20
    end)
    and a.carrier_items not in (select carried_items from CST_ASIR.HIERARCHY_asir where carried_item_type in('Connection') ))A
    where not exists
    (select *
    from CST_DSA.HIERARCHY_MISMATCHES B where
    A.REPORTNUMBER=B.REPORT_NUM and
    A.REPORTTYPE=B.REPORT_TYPE and
    A.REPORTDESCRIPTION=B.REPORT_DESC and
    A.CARRIED_ITEMS=B.CARRIED_ITEMS and
    A.CARRIED_ITEM_TYPE=B.CARRIED_ITEM_TYPE and
    A.NO_OF_ROUTE_OF_CARRIED_ITEM=B.NO_OF_ROUTE_OF_CARRIED_ITEM and
    A.CARRIED_ITEM_ROUTE_NO=B.CARRIED_ITEM_ROUTE_NO and
    A.CARRIER_ITEMS=B.CARRIER_ITEMS and
    A.CARRIER_ITEM_TYPE=B.CARRIER_ITEM_TYPE and
    A.CARRIED_ITEM_PROTECTION_TYPE=B.CARRIED_ITEM_PROTECTION_TYPE
    AND B.SOURCE_SYSTEM='PACS'
    Explain Plan
    ==========
    Plan
    INSERT STATEMENT ALL_ROWSCost: 129 Bytes: 1,103 Cardinality: 1                                                        
         20 LOAD AS SELECT CST_DSA.HIERARCHY_MISMATCHES                                                   
              19 PX COORDINATOR                                              
                   18 PX SEND QC (RANDOM) PARALLEL_TO_SERIAL SYS.:TQ10002 :Q1002Cost: 129 Bytes: 1,103 Cardinality: 1                                         
                        17 NESTED LOOPS PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 129 Bytes: 1,103 Cardinality: 1                                    
                             15 HASH JOIN RIGHT ANTI NA PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 129 Bytes: 1,098 Cardinality: 1                               
                                  4 PX RECEIVE PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 63 Bytes: 359,283 Cardinality: 15,621                          
                                       3 PX SEND BROADCAST PARALLEL_TO_PARALLEL SYS.:TQ10001 :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621                     
                                            2 PX BLOCK ITERATOR PARALLEL_COMBINED_WITH_CHILD :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621                
                                                 1 MAT_VIEW ACCESS FULL MAT_VIEW PARALLEL_COMBINED_WITH_PARENT CST_ASIR.HIERARCHY :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621           
                                  14 NESTED LOOPS ANTI PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 65 Bytes: 40,256,600 Cardinality: 37,448                          
                                       11 HASH JOIN PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 65 Bytes: 6,366,160 Cardinality: 37,448                     
                                            8 BUFFER SORT PARALLEL_COMBINED_WITH_CHILD :Q1002               
                                                 7 PX RECEIVE PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 1 Bytes: 214 Cardinality: 2           
                                                      6 PX SEND BROADCAST PARALLEL_FROM_SERIAL SYS.:TQ10000 Cost: 1 Bytes: 214 Cardinality: 2      
                                                           5 INDEX FULL SCAN INDEX CST_DSA.IDX$$_06EF0005 Cost: 1 Bytes: 214 Cardinality: 2
                                            10 PX BLOCK ITERATOR PARALLEL_COMBINED_WITH_CHILD :Q1002Cost: 63 Bytes: 2,359,224 Cardinality: 37,448                
                                                 9 MAT_VIEW ACCESS FULL MAT_VIEW PARALLEL_COMBINED_WITH_PARENT CST_ASIR.HIERARCHY :Q1002Cost: 63 Bytes: 2,359,224 Cardinality: 37,448           
                                       13 TABLE ACCESS BY INDEX ROWID TABLE PARALLEL_COMBINED_WITH_PARENT CST_DSA.HIERARCHY_MISMATCHES :Q1002Cost: 0 Bytes: 905 Cardinality: 1                     
                                            12 INDEX RANGE SCAN INDEX PARALLEL_COMBINED_WITH_PARENT SYS.HIERARCHY_MISMATCHES_IDX3 :Q1002Cost: 0 Cardinality: 1                
                             16 INDEX RANGE SCAN INDEX PARALLEL_COMBINED_WITH_PARENT CST_DSA.IDX$$_06EF0001 :Q1002Cost: 1 Bytes: 5 Cardinality: 1

  • Error while executing Report migrated from 6i to 11g

    Hello,
    We have migrated forms & reports from 6i to 11g.
    Most of the reports work fine but we are having issue with very few reports.
    Let me explain the issue here:
    We have a Form that Runs a report.
    The Report has a PLL which loads a C library and calls a C Function. [using ORA_FFI]
    The C Function which is called has embedded SQL in it.
    The Report Server Engine crashes on encountering the first Executable SQL statement. [A Select or Insert]
    Need help to resolve this as we have tried a lot of things and not been successful.
    Below is a gist of the errors we see in teh Report server logs:
    "console~rep_test~1.log"
    Nov 14, 2012 7:37:11 AM com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl <init>
    WARNING: "IOP00410201: (COMM_FAILURE) Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: 190.10.97.30; port: 57343"
    org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
    at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2200)
    at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2221)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:205)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:218)
    at com.sun.corba.se.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:101)
    at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:152)
    at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:118)
    at org.omg.CORBA.portable.ObjectImpl._request(ObjectImpl.java:431)
    at oracle.reports.engine._EngineClassStub.shutdown(_EngineClassStub.java:198)
    at oracle.reports.server.EngineManager.shutdownEngine(EngineManager.java:1748)
    at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:1330)
    at oracle.reports.server.JobManager.runJobLocal(JobManager.java:2238)
    at oracle.reports.server.JobManager.dispatch(JobManager.java:1467)
    at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1537)
    at oracle.reports.server.ConnectionPOA._invoke(ConnectionPOA.java:460)
    at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:637)
    at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:189)
    at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1682)
    at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1540)
    at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:922)
    at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
    at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:694)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:451)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1213)
    at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.performWork(ThreadPoolImpl.java:471)
    at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:500)
    Caused by: java.net.ConnectException: Connection refused
    at sun.nio.ch.Net.connect(Native Method)
    at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:500)
    at java.nio.channels.SocketChannel.open(SocketChannel.java:146)
    at com.sun.corba.se.impl.transport.DefaultSocketFactoryImpl.createSocket(DefaultSocketFactoryImpl.java:60)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:188)
    ... 23 more
    ===============================================================================================================================
    "rwserver_diagnostic.log"
    [2012-11-14T07:37:10.969+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 12] [ecid: 0000Jf_MXxPFg4^kxS3j7k1GbGIR000003,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] EngineManager:updateEngineState Engine rwEng-0 status is 3
    [2012-11-14T07:37:10.969+01:00] [reports] [NOTIFICATION:16] [REP-56004] [oracle.reports.server] [tid: 12] [ecid: 0000Jf_MXxPFg4^kxS3j7k1GbGIR000003,0] EngineInfo:setState Engine rwEng-0 state is: Running
    [2012-11-14T07:37:11.294+01:00] [reports] [INCIDENT_ERROR] [REP-50125] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [URI: /reports/rwservlet/showjobs] REP-50125 : org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 208 completed: Maybe [[
    org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 208 completed: Maybe
    at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectionAbort(ORBUtilSystemException.java:2400)
    at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectionAbort(ORBUtilSystemException.java:2418)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.readBits(SocketOrChannelConnectionImpl.java:354)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.handleEvent(SocketOrChannelConnectionImpl.java:1124)
    at com.sun.corba.se.impl.transport.SelectorImpl.run(SelectorImpl.java:289)
    Caused by: org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 211 completed: No
    at com.sun.corba.se.impl.logging.ORBUtilSystemException.ioexceptionWhenReadingConnection(ORBUtilSystemException.java:2484)
    at com.sun.corba.se.impl.logging.ORBUtilSystemException.ioexceptionWhenReadingConnection(ORBUtilSystemException.java:2502)
    at com.sun.corba.se.impl.protocol.giopmsgheaders.MessageBase.readGIOPHeader(MessageBase.java:116)
    at com.sun.corba.se.impl.transport.CorbaContactInfoBase.createMessageMediator(CorbaContactInfoBase.java:150)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.readBits(SocketOrChannelConnectionImpl.java:314)
    ... 2 more
    Caused by: java.io.IOException: End-of-stream
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.readFully(SocketOrChannelConnectionImpl.java:602)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.read(SocketOrChannelConnectionImpl.java:521)
    at com.sun.corba.se.impl.protocol.giopmsgheaders.MessageBase.readGIOPHeader(MessageBase.java:112)
    ... 4 more
    [2012-11-14T07:37:11.296+01:00] [reports] [INCIDENT_ERROR] [REP-50125] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [URI: /reports/rwservlet/showjobs] REP-50125 : org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No [[
    org.omg.CORBA.COMM_FAILURE: vmcid: SUN minor code: 201 completed: No
    at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2200)
    at com.sun.corba.se.impl.logging.ORBUtilSystemException.connectFailure(ORBUtilSystemException.java:2221)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:205)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:218)
    at com.sun.corba.se.impl.transport.SocketOrChannelContactInfoImpl.createConnection(SocketOrChannelContactInfoImpl.java:101)
    at com.sun.corba.se.impl.protocol.CorbaClientRequestDispatcherImpl.beginRequest(CorbaClientRequestDispatcherImpl.java:152)
    at com.sun.corba.se.impl.protocol.CorbaClientDelegateImpl.request(CorbaClientDelegateImpl.java:118)
    at org.omg.CORBA.portable.ObjectImpl._request(ObjectImpl.java:431)
    at oracle.reports.engine._EngineClassStub.shutdown(_EngineClassStub.java:198)
    at oracle.reports.server.EngineManager.shutdownEngine(EngineManager.java:1748)
    at oracle.reports.server.JobManager.runJobInEngine(JobManager.java:1330)
    at oracle.reports.server.JobManager.runJobLocal(JobManager.java:2238)
    at oracle.reports.server.JobManager.dispatch(JobManager.java:1467)
    at oracle.reports.server.ConnectionImpl.runJob(ConnectionImpl.java:1537)
    at oracle.reports.server.ConnectionPOA._invoke(ConnectionPOA.java:460)
    at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:637)
    at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:189)
    at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1682)
    at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1540)
    at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:922)
    at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
    at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:694)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:451)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1213)
    at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.performWork(ThreadPoolImpl.java:471)
    at com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$WorkerThread.run(ThreadPoolImpl.java:500)
    Caused by: java.net.ConnectException: Connection refused
    at sun.nio.ch.Net.connect(Native Method)
    at sun.nio.ch.SocketChannelImpl.connect(SocketChannelImpl.java:500)
    at java.nio.channels.SocketChannel.open(SocketChannel.java:146)
    at com.sun.corba.se.impl.transport.DefaultSocketFactoryImpl.createSocket(DefaultSocketFactoryImpl.java:60)
    at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.<init>(SocketOrChannelConnectionImpl.java:188)
    ... 23 more
    [2012-11-14T07:37:11.297+01:00] [reports] [NOTIFICATION:16] [REP-56004] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [URI: /reports/rwservlet/showjobs] EngineInfo:setState Engine rwEng-0 state is: Shutdown
    [2012-11-14T07:37:11.297+01:00] [reports] [TRACE:32] [REP-56047] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] EngineManager:remove Reports Server shut down engine rwEng-0.
    [2012-11-14T07:37:11.297+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobManager:start Using Maximum Job Retry value = 0
    [2012-11-14T07:37:11.297+01:00] [reports] [NOTIFICATION:16] [REP-56016] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [URI: /reports/rwservlet/showjobs] JobManager:updateJobStatus Job 1658 status is: The report terminated with error: [[
    REP-56048: Engine rwEng-0 crashed., job Id: 1658.
    [2012-11-14T07:37:11.297+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobObject:writeLongUTF Number of Break Index values=1
    [2012-11-14T07:37:11.298+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobObject:writeLongUTF String= Engine rwEng-0 crashed., job Id: 1658 strlen=37
    [2012-11-14T07:37:11.298+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobManager:notifyWaitingJobs Master job 1658 notify its duplicated jobs.
    [2012-11-14T07:37:11.299+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobManager:updateJobStatus Finished updating job: 1658
    [2012-11-14T07:37:11.299+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] JobManager:runJobInEngine Encounted exception in job 1658
    [2012-11-14T07:37:11.299+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 17] [ecid: 004nX0QrTwUFg4^kxS3j7k0005WT000k^s,0:1:0x5f5e639:100000000] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] [URI: /reports/rwservlet/showjobs] ConnectionImpl:runJob jobid = 1658 Failed with exceptionoracle.reports.RWException: IDL:oracle/reports/RWException:1.0
    [2012-11-14T07:37:11.318+01:00] [reports] [NOTIFICATION:16] [REP-56013] [oracle.reports.server] [tid: 12] [ecid: 0000Jf_MXxPFg4^kxS3j7k1GbGIR000003,0] ConnectionManager:release Connection 239 is released.
    [2012-11-14T07:37:11.382+01:00] [reports] [NOTIFICATION:16] [REP-56020] [oracle.reports.server] [tid: 13] [ecid: 0000Jf_MXxSFg4^kxS3j7k1GbGIR000004,0] EngineManager:spawnEngine Launching engine rwEng-0.
    [2012-11-14T07:37:11.382+01:00] [reports] [NOTIFICATION:16] [] [oracle.reports.server] [tid: 13] [ecid: 0000Jf_MXxSFg4^kxS3j7k1GbGIR000004,0] EngineManager:spawnEngine OS Name = Linux : OS Arch = amd64
    [2012-11-14T07:37:11.383+01:00] [reports] [TRACE:16] [] [oracle.reports.server] [tid: 13] [ecid: 0000Jf_MXxSFg4^kxS3j7k1GbGIR000004,0] [SRC_CLASS: oracle.reports.utility.RWLogger] [SRC_METHOD: writeln] EngineManager:spawnEngine Start engine command line = /utility/app/oracle/product/fmwfr/formsreports1/config/reports/bin/rwengine.sh -server -cp /utility/app/oracle/product/fmwfr/formsreports/reports/jlib/rwrun.jar -Dcomponent.path=rep_test -Doracle.reports.component=rwEng-0 -Dinprocess.server=false -Duser.language=it -Duser.region=IT -Xms512m -Xmx512m -Xss512k oracle.reports.engine.RWEngine name=rwEng-0 server=rep_test ORACLE_HOME=/utility/app/oracle/product/fmwfr/formsreports engineimplclass=oracle.reports.engine.EngineImpl cacheDir=/utility/app/oracle/product/fmwfr/formsreports1/reports/cache diagnosis="yes" keepConnection="yes" server_ior="/test/orafood/tmp/rep_test_129261664_1352875031383"
    [2012-11-14T07:37:11.386+01:00] [reports] [NOTIFICATION:16] [REP-56021] [oracle.reports.server] [tid: 13] [ecid: 0000Jf_MXxSFg4^kxS3j7k1GbGIR000004,0] EngineManager:spawnEngine Engine rwEng-0 has been launched.
    ====================================================================================================================
    Regards,
    KVS
    I can post the other logs if it helps.

    Hi Rajesh,
    If you just want to execute the report in web, you can do one thing.
    Go to Query designer of your relevent system.
    Open the Query which you want to execute in Web.
    Then in the Query tab(first one) in the drop down list you have the Option  'execute'./ the 5th Icon  in the Query designer screen.On clicking this it will open a new window( Internet Explorer) and prompts for your system credentials.
    Upon providing them  the query start executing if it deosn't have any selections, else selection screen appears.
    You can save the link and can use this when ever you want to execute the query.Use it in the BW system environment's Intrenet explorer only.
    Hope this helps.
    Regards,
    Ganesh Thota

  • Error while executing report throug web (procedure to run a report through)

    Hi experts,
    I am executing a report through web. But its not running , displaying an error message "page cannot be displayed".
    Please provide me the step by step procedure (settings) to run a report in web.
    regards,
    Rajesh

    Hi Rajesh,
    If you just want to execute the report in web, you can do one thing.
    Go to Query designer of your relevent system.
    Open the Query which you want to execute in Web.
    Then in the Query tab(first one) in the drop down list you have the Option  'execute'./ the 5th Icon  in the Query designer screen.On clicking this it will open a new window( Internet Explorer) and prompts for your system credentials.
    Upon providing them  the query start executing if it deosn't have any selections, else selection screen appears.
    You can save the link and can use this when ever you want to execute the query.Use it in the BW system environment's Intrenet explorer only.
    Hope this helps.
    Regards,
    Ganesh Thota

  • Error while executing Report in BI7.0

    Hello Friends,
    My BI7.0 system is a fresh installation.
    I have created a query using Nw2004s Bi Frontend-Bex Query Designer.
    After saving the changes when I click on Execute Button (in between Saveall & Check buttons) I am getting an error in the browser
    The page cant be displayed. & the URL is
    http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=IC_SLS_Q001&VARIABLE_SCREEN=X&DUMMY=1
    Is this URL correct one? Or do i need to make any further settings ? If so what are those settings & where they need to be done?
    Why am i not able to execute the Bex report in the browser?
    Please let me know
    Thanks
    mv_d

    Further to what Manjunath has pointed out..
    Note Symptom
    After pressing the "Execute" button in Web Application Designer, Query designer or Report Designer, the url is not valid. Possible variations are:
    The server is not included
    The port is not included
    URL is like http:///irj..... (missing server & port)
    Other terms
    URL generation, Execute Query, Execute Web Template, Execute Report
    Reason and Prerequisites
    Missing configuration of the portal. Check following:
          1. Start the transaction SE37
          2. Call the Module RSWAD_URL_GET
          3. Fill the parameters as follows
               I_ACTION: NEW
               I_OBJTYPE: QU
               I_TECHNAME: QUERY
          4. Execute and check the result
          5. E_URL=http://<your expected server>:<your expected port>/irj/...&QUERY=QUERY
    Solution
    If the result is as you expect, the problem is not in the configuration. In other case please do following:
    Run the transaction SE16
    View the table RSPOR_T_PORTAL
    Execute it (expand the width to see the parameter URL_PREFIX)
    Check if there is a prefix for your portal maintained
    If not, correct it editing this table directly.
    For any other configuration problems please read the note 917950
    Hope it helps...
    Arun

  • REP - 300 Error while executing report from Application

    Hi,
    I have report in Report Builder & for the same report form is there in Form Builder in which parameter page is designed. From application where I am calling report is internally calling form & in form Procedure Run Report is there which is calling report from Report Builder. Both report from builder & form form Builder are compiled . Also query is executing fine in Toad without error. Also all query fields are present in database.
    But when I am trying to excute report from Application it is giving error as "REP - 300 Invalid Identifier " & it displays whole query.
    Note - Report & it's Form are in ORACLE - 10g. Also the user through which I am executing report from application is ADMIN user , so it has executing permission.

    looks like error in parameters. check out the value of variable that you are passing through to report from form. Put a messages to see variable values before execute report.

  • Error while executing Report

    Hi,
    Am getting very strange error while running a report.
    It gives me an 'Autopass' error while inserting some variables in the filter screen.
    Also it shows "system error in program CL RSR WWW RENDERER and form GET VARDEF FOR F4:03.
    Kindly provide your insights on this.
    regards,
    Omprakash

    Hi , could you please check note 1166294 and check if the issue will be fixed ?
    1166294-BRAIN 299 in CL_RSR, form GET_CHANMID-02-
    In case if you are executing the the report on a multiprovider then check this note below
    Note 1166241 - BRAIN 299 in CL_RSR, form GET_COB_PRO-01-
    hope this helps
    santosh

  • Error while executing report related to hierarchy

    Hello all
    Why trying to execute a query that we moved to production we're getting the following error.
    Error Hierarchy MANAGEMENT_REPORTING 99991231 is not available for InfoObject
    This heirarchy is defined on the BCOCOM_CC Combination code info object and is a time dependant heirarchy.
    I can verify that the definitions of the queries in both Quality and Production are the same and data had also been loaded into the heirarchy and the hierarchy tables are active.
    There are no authorization defined on this object.
    Please let me know your views
    Thanks in advance

    Hi..
    couldnt respond coz its a busy day...
    1.Check your query in development..
    Open query designer --
    right click the concerned infoboject for ur hierarchy and
    in the properties window click on hierarchy.tab...
    are you able to see the hierarchy active there...i.e. is it available there??
    Now if everything is fine then run the query in development and check if there is issue?
    If on query execution everything is fine then compare the hierarchy properties of two queries..of Prod and Development..there should be some settings different..or transport issue...
    If possible transport the query once again..if it is working fine in dev.
    Regards,
    rk

  • Error while executing reports in the SPM UI

    Hi,
    We try to run an OOB report "Spend by Supplier". After report generated, tried to add few more dimensions Source system supplier and Category to the same report.
    After the report started, it gave an error massage.
    Error message states that
    "Dimension(s) in result do not match query - report execution aborted"
    Kindly suggest how resolve this issue.
    Regards,
    Alaap

    Hi Alaap,
    Seems like there is some problem with you BW query.  Please try and run the 'Spend Analysis Final Query' in BEx first to see if you get the same error or may be you get more details as to what the problem is.
    Depending on how much data you have in your system, you may not be able to execute the default query.  In this case please create a copy query with only the necessary dimensions & measures (characteristics & key-figures) and execute that to test.
    Regards,
    Rohit

  • Error while Executing reports in Portal

    Hello All,
    We are facing the following Error message while running reports in Portal.
    We have recently updated the EP Patch to 17..  since then we are facing the issue.
    500 Internal Server Error
      BEx Web Application
    Failed to process request; contact your system administrator
    Error Summary
    Exception occured while processing the current request; this exception cannot be handled by the application or framework
    If the information on this page does not help you locate and correct the cause of the problem, contact your system administrator
    To facilitate analysis of the problem, keep a copy of this error page Hint: Most Web browsers allow you to select all content, and copy and paste it into an empty document (such as in an email or simple text file)
    Root Cause
    The initial exception that caused the request to fail was:
    com/sap/portal/services/api/connectorgateway/IConnectorGatewayService
    Log ID
    001A4B0717C8005E0000014900002E07000498168CA315E3
    While checking the KM Content, we are getting the following error:
    Runtime Error
    An exception occured while processing the request.
    Additional information: com/sapportals/wcm/util/uri/RID
    Exception ID = 7004f63e-daf3-2d10-689e-add88da33d97      Portal runtime error.
    An exception occurred while processing your request. Send the exception ID to your portal administrator.
    Exception ID: 06:27_27/12/10_0014_49226950
    Refer to the log file for details about this exception.

    Hi Sneha,
    Please check the default trace log file in NWA. Also verify that BI System and portal system should be same SP level.
    If there is any mismatch in the SP level then issue might comes. So check SP level for Bi and Portal.
    Regards, Arun Jaiswal

  • User Missing Error while Executing a Bex Query.

    Hi,
    I created a query using BEx Query Designer, i'am trying to  execute the query. After giving the  Login ID and Password to execute in EP  it shows a exception called 'user' missing.Kindly help out regarding this issue.
    With Regards,
    Pradeep.B

    Hi Zoltan,
    How to opn it through Analyzer can you please tell me.If i'am unable to open after creatinga  new user as you said what roles i have to give or If am able to open thriugh Analyzer what is the Manditory role i need to check for the user in EP.
    Please let me know am new to this BI.
    Thnaks and Regards,
    Pradeep.B

  • Error While Executing Report - "Field symbol has not yet been assigned."

    Dear All,
    I am using Cube 0PP_C01 which filled with data Source 2LIS_04_P_MATNR.
    Based on this Cube I had developed a report.
    0MRP_CONTRL characteristic filled using 0MATERIAL master data.
    Authorization in this report is based on Characteristic 0MRP_CONTRL & 0PLANT.
    While running report User gets error u201CField symbol has not yet been assignedu201D & Analyzer just quit.
    Also getting dump in tcode ST22.
    This problem occurs when limited authorization of 0MRP_CONTRL & 0PLANT assigned to user & if I provide full authorization 0BI_ALL then report runs fine.
    When I will remove 0MATERIAL characteristic from report then Report runs fine & at a time when I put 0MATERIAL in the report its gives error.
    Please suggest me what to do as I can not give user 0BI_ALL right in RSECADMIN.
    Please help.
    Regards,
    Divyesh Khambhati.

    Hello Shashank,
    Thanks for your reply.
    No material is not checked for authorization relevant.
    Is it required to make 0MATERIAL to be checked as Authorization relevant ??
    I had make 0MATERIAL authorization relevant & assign all material Authorization to User but still error coming..
    I do not have any idea regarding this colon authorization, if possible can you explaine me how I can use this colon authorization ?
    Divyesh Khambhati
    Edited by: Divyesh M Khambhati on Oct 2, 2010 10:29 AM

Maybe you are looking for

  • Cost center assigment cycle

    Hi friends,               Can any one help me in this issue? I have created assignment cycle where the sender is a cost center and the receiver is different WBS elements and a cost center, I would like to know if there is any possibility that the val

  • Report by users

    Hi all, we need to see, how many times a particular queiry get executes in span of 5 months for reporting purpose. i.e where to get proper information. its urgent. thanks & regards pushkar

  • Best practice to update to Snow Leopard

    I just placed my family pack order on Amazon.com for Snow Leopard. But this will be the first time for me doing an OS upgrade on a Mac (all 4 Macs in my house came with Leopard on them so we've only done the "software update" variety). I am a reforme

  • ABAP Proxy URI

    Hello Everyone, Over the past couple of years I have been configuring the following in SM59 /sap/xi/engine?type=entry when going from a backend system to XI 3.0 and /sap/xi/engine?type=receiver when going from XI 3.0 to a backend system. My backend s

  • Why are there no screen recorders?

    Why are there no screen recorders? I really need one