Error while executing the query in RSRT

Hi to all,
I am executing the query in client development system in RSRT.
Error coming (Query could not open Genun id is invalid)
I shall be thankfull to you for this.
Regards
Pavneet Rana

Hi,
Plz check ur report and execute at the designer and take its technical name and go to RSRT. log out and log in and try..
if not check ur authorisation.
Regards....KP

Similar Messages

Serious system error while executing the query: java.lang.OutOfMemoryError

From ALSB, we are trying to insert records in a table, by calling the ALDSP webservice. It is working fine when the xml (ie., given as input to the ALDSP webservice) is small. But facing the following error when the input xml size is large.
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space
We do not want to increase the heap size. Is there any other way we can solve this problem?

In logical dataservice of ALDSP we have created a procedure called createTest, which is used to insert mulitple rows in the table. We have created a webservice for that logical DataService.
Using the ALSB, we are calling the webservice -> createTest Operation and we are passing xml as input to that createTest function.
Input xml:
<ns1:createTest>
<ns1:createTemps>
<ns0:createTemp>
     <ns0:field1>1</ns0:field1>
          <ns0:field10>test1</ns0:field10>
</ns0:createTemp>
<ns0:createTemp>
     <ns0:field1>2</ns0:field1>
          <ns0:field10>test2</ns0:field10>
</ns0:createTemp>
     </ns1:createTemps>
</ns1:createTest>
each ns0:createTemp represent a row that need to be inserted in the table.
When the number of ns0:createTemp is less ( when the number of rows that need to be inserted is less) then no problem occurs, it is getting inserted properly. But when there are more number of ns0:createTemp then we are getting the following error
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space

Error while executing the query

Hi all,
I am facing two errors while executing my query namely
1)The validity interval has initial value as lower limit.
2)Diagnosis
Query uses non-cumulative key figures. It requires calculation for non-cumulative values for more than 2000 periods in time. The most common reason for this is that the non-cumulative InfoCube has a very large validity interval and the query has no time restrictions. With exception aggregation AVERAGE (AV1 or AV2) in particular, this lack of time restriction would result in considerable memory and performance problems.
System Response
Query cannot be executed in this way.
Please suggest a possible reason for these errors.
Thanks and Regards.
Mudit Khanna

Hi,
See
Refer Notes 496638,571364
210432
528202
1318741
208546
and also see simila thread
Problem getting data from BF cube in report (Non cummulative keyfigures)
Thanks
Reddy

0ADHOC error while executing the query from Report Designer

Hi All,
When I am executing The Query from Report Designer, am getting the below error.
Please help me in this regard.
The initial exception that caused the request to fail was:
The Web template "0ADHOC" does not exist in the master system
com.sap.ip.bi.base.exception.BIBaseRuntimeException: The Web template "0ADHOC" does not exist in the master system
at com.sap.ip.bi.webapplications.runtime.service.template.impl.TemplateService.getTemplateContent(TemplateService.java:57)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:82)
at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:163)
at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:79)
at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:133)
Thanks,
KVR

Hi,
The web template 0ADHOC is usually the standard web template for 3.x queries. The Report Designer executes the reports in java web, thus tries to find the template 0ADHOC in the 7.0 templates and does not find it. Check whether you have maintained the standard web template 0ADHOC for 7.0 reports also:
Transaktion SPRO -> SAP Reference Image -> SAP NetWeaver -> Business Intelligence -> Settings for Reporting and Analysis -> Bex Web -> Set Standard Web Templates
Best regards,
Janine

Error while executing the query-VIMP

Dear alll
I am executing the query in production i am getting this below error message
BRAIN 629 Specify a value for variable companycode(single values,entry,mandatory)
BRAIN 629 specify a values for variables Simulkation ID1Individal values,requireed entry)
RSBOL 000 Program error in class SAPMSSY1 Method UNCAUGHT_EXCEPTION
BRAIN 633 varibale contain invalid values
It have been worked untill yesterday
Please suggest me in futhuru its very very imp to deliver the reports

Hi,
Try one of these
1. Take of the infoobject from the query definition and see if the query is working.
2. Try saving this Query as another one and try executing it.
REgards
Govind

Getting error while executing the query in query generator

Hi all
I need to execute on query where I set perameter ''delivery doc date'' but when I execute its giving me error
Please help
Error is :- 1) .[Microsoft][SQLSERVER NATIVE CLINT 10.0][SQL SERVER] MUST SPECIFY TABLE TO SELECT FROM ,2 [Microsoft][SQLSERVER NATIVE CLINT 10.0][SQL SERVER] STATMENT 'BLANKET AGREEMENT'(OOAT) (s) COULD NOT BE PREPARED .HELP
SELECT ELECT T0.[CardName] PartyName, T1.[Dscription] as 'Item description', T0.[NumAtCard] as 'Customer Ref No',
T1.[ShipDate] as 'Del Date', T0.[DocNum] as 'SO No', T0.[DocDate] as 'SO Date', T1.[Quantity],
T1.[Price],T1.[Quantity]*T1.[Price] as 'Line total without tax', ISNULL( T1.[DelivrdQty],0) As DelivrdQty,
ISNULL( T1.[DelivrdQty]*T1.[Price],0) as 'Delivered amount', T1.[OpenQty] as 'pending qty',
ISNULL((select sum(a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) from BMM_PNITEM A inner join bmm_PNFGALLOC B On A.PnRecordId = B.PNRecordId
and A.LineId = b.LineId and A.Linetype =7 and (a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) >0 and a.Status<>'C' and T1.ItemCode=A.ItemCode),0) as WIP,
ISNULL((select sum(a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) from BMM_PNITEM A inner join bmm_PNFGALLOC B On A.PnRecordId = B.PNRecordId
and A.LineId = b.LineId and A.Linetype =7 and (a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) >0 and a.Status<>'C' and T1.ItemCode=A.ItemCode),0)*T1.Price as Value
FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry join OCRD T3 on t3.CardCode=t0.CardCode
where T1.ShipDate between [%0]and [%1] and t3.groupCode in('115','116') ORDER BY T1.ShipDate

hi
you need to use parameters.
try this:
/*select from [dbo].[RDR1] T1*/
DECLARE @FromDate datetime
/*where*/
set @FromDate =/* T2.ShipDate */N'[%0]'
/*select from [dbo].[RDR1] T1*/
DECLARE @ToDate datetime
/*where*/
set @ToDate =/* T2.ShipDate */N'[%0]'
SELECT T0.[CardName] PartyName, T1.[Dscription] as 'Item description', T0.[NumAtCard] as 'Customer Ref No',
T1.[ShipDate] as 'Del Date', T0.[DocNum] as 'SO No', T0.[DocDate] as 'SO Date', T1.[Quantity],
T1.[Price],T1.[Quantity]*T1.[Price] as 'Line total without tax', ISNULL( T1.[DelivrdQty],0) As DelivrdQty,
ISNULL( T1.[DelivrdQty]*T1.[Price],0) as 'Delivered amount', T1.[OpenQty] as 'pending qty'
ISNULL((select sum(a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) from BMM_PNITEM A inner join bmm_PNFGALLOC B On A.PnRecordId = B.PNRecordId
and A.LineId = b.LineId and A.Linetype =7 and (a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) >0 and a.Status<>'C' and T1.ItemCode=A.ItemCode),0) as WIP,
ISNULL((select sum(a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) from BMM_PNITEM A inner join bmm_PNFGALLOC B On A.PnRecordId = B.PNRecordId
and A.LineId = b.LineId and A.Linetype =7 and (a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) >0 and a.Status<>'C' and T1.ItemCode=A.ItemCode),0)*T1.Price as Value
FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry join OCRD T3 on t3.CardCode=t0.CardCode
where T1.ShipDate between @FromDate and @ToDate and t3.groupCode in('115','116') ORDER BY T1.ShipDate

Receiving SQL Error: INTERNAL_ERROR while executing the query

Dear All,
I am receiving the below error while executing a query.
SQL Error: INTERNAL_ERROR
Diagnosis
The database system registered an SQL error. As available, the error number and a description are included in the short text. Possible causes for SQL errors include:
Overflow of database objects such as buffers, temporary tablespaces, rollback segments or data containers/tablespaces.
->These problems can generally be eliminated by system administrators.
Missing generated database objects such as tables or views based on inconsistent or inactive InfoCubes or InfoObjects. Examples of this include the view of the fact table for an InfoCube or the attribute SID table (X/Y table) of a characteristic.
-> These problems can generally be eliminated by a BW administrator.
SQL requests with incorrect content.
-> Problems of this type are generally programming errors.
System Response
Procedure
Contact your system administrator.
Procedure for System Administration
If there is no error description, look for one in the reference from the database producer.
Decide on the correct category for the SQL error and check if it can be eliminated. Generally the error can also be found in the syslog (transaction sm21). From there, transactions sm51 and sm50, the developer's trace log of the work process can be determined and the erroneous statement can be viewed in the log. This procedure is described in SAP Note 568768.
Notification Number DBMAN 257
I verified the table spaces and also done RSRV Repair of InfoObjects and InfoCubes and didnt find any error. But I am receiving this error for one particular month and remaining months are executing fine. Any ideas why i am receiving this error.
Regards
Ravi Y

OSS Note 1305568:
Symptom
A data mart query that
you want to execute within a data transfer process (DTP), for example, terminates with the
SQL error -1013 "Too many order columns".
The following is displayed in the monitor log of the data transfer process:
Error while extracting from source xxxxxx (type InfoProvider)
Message number RSBK 242
Exception CX_SQL_EXCEPTION occurred (program:
CL_SQL_STATEMENT==============CP, include:
CL_SQL_STATEMENT==============CM004, line: 32).
Message number RS_EXCEPTION 000
SQL error: POS(3306) Too many order columns
Message number DBMAN 257
Error reading the data of InfoProvider xxxxxx
Message number DBMAN 305
You have already implemented Note 1065380.
Other terms
CX_SQL_EXCEPTION, message number, RS_EXCEPTION 000, DBMAN 257, RSBK 242,
RS_EXCEPTION 000
Reason and Prerequisites
The MaxDB internal limit of 4016 bytes or 128 fields for GROUP BY columns was exceeded.
Solution
When you implement these corrections, no aggregation is performed for the data (GROUP BY) if the limits of the MaxDB database have been exceeded.
The limit values for the aggregation bahavior can also be manually reduced if there are problems with the default values.
Two RSADMIN parameters are provided for this.
MAXDB_MAX_GROUP_BY_FLDS is the maximum number of GROUP BY fields. The default value is 128.
MAXDB_MAX_GROUP_BY_LEN is the maximum total length of the GROUP BY fields. The default value is 4000.
SAP NetWeaver BI 7.00
Import Support Package 21 for SAP NetWeaver BI 7. 00 (SAPKW70021) into your BI system. The Support Package is available when Note 1270629"SAPBINews NW 7.00 BI Support Package 21", which describes this Support Package in more detail, is released for customers.

Error while executing the workbook query.

Hi guyz
i'm getting an error while executing the workbook Query. The actual problem is there is a filter for REQUID in the query definition for removing the doble count. there is customer exit written. the report works fine in DEVELOPMENT but it is not working in quality.
The query on which this workbook is created is working fine, but the problem is when we execute the workbook i'm facing this issue.
we re-transported the queries but still we are facing the same problem.
while we execute the query we are prompted for variable entry(Optional) for date. when we press OK we get the below error
" NO SID value found for the value REQU_4DQT75Y2RJPVT4PXZ4LHC70V3 of characteristic"
the request is not available in the BW system. the request was deleted long back, but it is still referring to the same the request id
could someone please tell me where we went wrong and why we are getting this error.
Regards,
Anil Vadde

Hey ,I think data load to your target on which the query was based had some issue.
Can you check the data load to the data target.change the status of request concerned to red and delete.do reconstruct if neeed..I think the request had some issue.
Even you can go to RSRQ or RSMO and filter on the basis of this request and see its status.
Regards,
RK

While executing the query in the web template I am facing below issue

Hello SAP geniuses,
Please help me on my issue ,
while executing the query in the web template i am facing below issue.
The variable for characteristic (region) is appearing but this characteristic (region) is not appearing in the free characteristic zone but when we are executing the query with out webtemplate it is showing both variable and free characteristic
can anybody help us to identify what is the issue with the web template.
Thanks
Alok

Hi,
Plz check ur report and execute at the designer and take its technical name and go to RSRT. log out and log in and try..
if not check ur authorisation.
Regards....KP

Internal Error while executing a query with varaints in BEX

HI All,
I am executing a query which has 4 variants. when I use the first 3 variants the query is working fine.....but when I try to execute the same query for the 4th variant....the system is giving an error message called Internal Error.....
when I executed the same query with same variant...in RSRT transaction code...I was able to see the results....
The error messages that I am getting as follows...
<Internal Error> receiving from the BW Server Failed. BW server raised exception SYSTEM_FAILURE. DO you want to see more information...
when I selected YES....I got the following message
Error in a ABAP statement when processing an Internal Table.table.
Error Group
RFC_ERROR_SYSTEM_FAILURE
when clicked on the OK button the following message is displayed....
<Internal Error> Can not determine text elements for the current query.
Can any one explain me what went wrong...is there any thing that I need to do in the BEX settings...are there any patches that needs to be installed...or any OSS notes available for this sort of errors...?
Advance in thanks
Dilse...
Hash

Hi Harish,
Execute the query in RSRT and check whether you have any short dump is in ST22. This would give a clear idea at what might have gone wrong.
Another thing is to check whether the code for the variable is fine in the user exit.
Hope this helps.
Bye
Dinesh

Error while running the query on web.

Hello Friends
I am getting the error message "Result set too large (1056716 cells); data retrieval restricted by configuration (maximum = 500000 cells)" while executing the query on the web in BI 2004s. How can this be resolved.
Any help in this regards is appreciated and points will be assigned.
Thanks.

Hi Rishi,
Maybe your queries returned too large volume of data.
So, if possible,
1, create some filter on your query to reduce the transferred data
2, chaange your query structure (reduce the items on the column or low)
and your error message seemed to be generated from BEx Analyzer...
does web report have "cells"?
if BEx Analyzer, the limit of cells volume is inneviable.
and if you use BEx Web, do you know note1008619?
this note describe about the limit of data volume on web applications.
Hope it help,
Kanako

Error While Executing The Queries

Hi Every Body,
Can Any One Explains Me About This Error And How To Rectify It,I Got This Error While Executing A query,In which We Are Using Customer Exit Varible For A Date Charectrstic..Im Getting This Error Before Entering In To Variable Screen.Error Is
Error An exception with the type CX_SY_ARITHMETIC_OVERFLOW occurred,but was ne
Error Overflow in the operation COLLECT
Please Help Me Out.
Thanks&Regards,
Nagarjun

Are you sure this was an error generated by MDM? This sounds like more of a netweaver based issue. You may try posting this in the Netweaver forum and give some more details on the system that you are running and the patch level.

Error while executing BEX query via FM

Hi Friends,
I am getting following error while executing a query via FM RRW3_GET_QUERY_VIEW_DATA.
Please see the error screenshot as follows.
the I_T_PARAMETERS entered are as follows.
Please let me know what is missing.
Thanks.
Regards,
Hrishikesh

the key date variable 0DAT is normally filled by a SAP exit variable, but this may not be the case. it could have been changed in the query designer, check the query in query designer and see.
Try passing 0DAT in the variable list with todays date

Gettng Error while executing the procedure(oracle 10.2.0.3.0)

Hi all,
I am getting following error While executing the package .
    PLS-00103: Encountered the symbol "Truncate" when expecting one of
         the following:
         * & = - + ; < / > at in is mod remainder not rem return
         returning <an exponent (**)> <> or != or ~= >= <= <> and or
         like LIKE2_ LIKE4_ LIKEC_ between into using || multiset bulk
         member SUBMULTISET_I have written follwing query in the package body.
EXECUTE IMMEDIATE 'TRUNCATE TABLE FORT ';
EXECUTE IMMEDIATE '
     INSERT INTO FORT (CID,CODE,DESC,SCODE,SES,T_DT,SDN,LANG)
     SELECT
       SERVICES.CID                                                     CID,
       PROFILE.FUCODE                                               CODE,
       TO_DATE(SUBSTR(SERVICES.STAT_CHNG,-7,6),'YYMMDD')   T_DT,
       PHOR.NUM                                                               SDN,
       C_ALL.cLANGUAGE                                      LANG
     FROM
      SERVICES      .....Please give me the solution for this .
Thank y ou
Edited by: user636482 on Apr 10, 2009 1:08 AM

I am getting following errors if I gave " ' " after not null.
LINE/COL ERROR
42/8     PLS-00103: Encountered the symbol "AND" when expecting one of the
         following:
         begin case declare end exception exit for goto if loop mod
         null pragma raise return select update while with
         <an identifier> <a double-quoted delimited-identifier>
         <a bind variable> << close current delete fetch lock insert
         open rollback savepoint set sql execute commit forall merge
         pipe
42/56    PLS-00103: Encountered the symbol "A" when expecting one of the
         following:
LINE/COL ERROR
         ) , * & | = - + < / > at in is mod remainder not rem => ..
         <an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
         LIKE4_ LIKEC_ between || multiset member SUBMULTISET_
         The symbol ", was inserted before "A" to continue.
42/74    PLS-00103: Encountered the symbol "D" when expecting one of the
         following:
         * & - + ; / at mod remainder rem return returning
         <an exponent (**)> and or || multiset
         The symbol "* was inserted before "D" to continue.
LINE/COL ERROR
45/6     PLS-00103: Encountered the symbol "COMMIT"
52/3     PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
         of the following:
         end not pragma final instantiable order overriding static
         member constructor map
         The symbol "static" was substituted for "PROCEDURE" to continue.
85/8     PLS-00103: Encountered the symbol "AND" when expecting one of the
         following:
         begin case declare end exception exit for goto if loop mod
         null pragma raise return select update while with
LINE/COL ERROR
         <an identifier> <a double-quoted delimited-identifier>
         <a bind variable> << close current delete fetch lock insert
         open rollback savepoint set sql execute commit forall merge
         pipe
85/56    PLS-00103: Encountered the symbol "A" when expecting one of the
         following:
         ) , * & | = - + < / > at in is mod remainder not rem => ..
         <an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
         LIKE4_ LIKEC_ between || multiset member SUBMULTISET_
         The symbol ", was inserted before "A" to continue.
LINE/COL ERROR
85/74    PLS-00103: Encountered the symbol "D" when expecting one of the
         following:
         * & - + ; / at mod remainder rem return returning
         <an exponent (**)> and or || multiset
         The symbol "* was inserted before "D" to continue.
88/8     PLS-00103: Encountered the symbol "COMMIT"
95/3     PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
         of the following:
         end not pragma final instantiable order overriding static
LINE/COL ERROR
         member constructor map
         The symbol "static" was substituted for "PROCEDURE" to continue.
133/3    PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
         of the following:
         end not pragma final instantiable order overriding static
         member constructor map
         The symbol "static" was substituted for "PROCEDURE" to continue.
169/3    PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
         of the following:with out adding " ' " I am getting the previous error which I mentioned in Previous thread(TRUNCATE)
Thank you

Error while executing the report

Hello Frineds..
Need some help once again .
When the user is executing the query , he is getting below error.sometimes.
could please tell me why it is so ?
Warning Result from ZPOS_C10 removed( attempt1) , Reorgenzation during reading.
Abort sys error - RSDRC ERROR in RSDRC_NUMC_BASIC_QUERY_DATA_ZPOS_C10 60
Abort sys error in prog RSDRC_NCUM_ROUTINES and form READ_DELTA_1
Could please tell me why it has happend ..and how can we improve the situation in next time
Thanks in advance
Regards

Hi Akshay,
I guess the error occurs since you made a change to the Data target - possibly removing/replacing a info-object.
Try this sequence:
1. Open the query in change mode and resave it.Now execute it and check.
2. If error still occurs then try executing the query in RSRT and check the error and analyze or post here.
Hope this helps.
Bye
Dinesh

Error while executing the query in RSRT

Similar Messages

Maybe you are looking for