Error while executing the query-VIMP
Dear alll
I am executing the query in production i am getting this below error message
BRAIN 629 Specify a value for variable companycode(single values,entry,mandatory)
BRAIN 629 specify a values for variables Simulkation ID1Individal values,requireed entry)
RSBOL 000 Program error in class SAPMSSY1 Method UNCAUGHT_EXCEPTION
BRAIN 633 varibale contain invalid values
It have been worked untill yesterday
Please suggest me in futhuru its very very imp to deliver the reports
Hi,
Try one of these
1. Take of the infoobject from the query definition and see if the query is working.
2. Try saving this Query as another one and try executing it.
REgards
Govind
Similar Messages
-
Serious system error while executing the query: java.lang.OutOfMemoryError
From ALSB, we are trying to insert records in a table, by calling the ALDSP webservice. It is working fine when the xml (ie., given as input to the ALDSP webservice) is small. But facing the following error when the input xml size is large.
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space
We do not want to increase the heap size. Is there any other way we can solve this problem?In logical dataservice of ALDSP we have created a procedure called createTest, which is used to insert mulitple rows in the table. We have created a webservice for that logical DataService.
Using the ALSB, we are calling the webservice -> createTest Operation and we are passing xml as input to that createTest function.
Input xml:
<ns1:createTest>
<ns1:createTemps>
<ns0:createTemp>
<ns0:field1>1</ns0:field1>
<ns0:field10>test1</ns0:field10>
</ns0:createTemp>
<ns0:createTemp>
<ns0:field1>2</ns0:field1>
<ns0:field10>test2</ns0:field10>
</ns0:createTemp>
</ns1:createTemps>
</ns1:createTest>
each ns0:createTemp represent a row that need to be inserted in the table.
When the number of ns0:createTemp is less ( when the number of rows that need to be inserted is less) then no problem occurs, it is getting inserted properly. But when there are more number of ns0:createTemp then we are getting the following error
<ALDSP> <BEA-000000> <Product> <Serious system error while executing the query:
{ld:ABC/Test}createTest:1
java.lang.OutOfMemoryError: Java heap space -
Error while executing the query
Hi all,
I am facing two errors while executing my query namely
1)The validity interval has initial value as lower limit.
2)Diagnosis
Query uses non-cumulative key figures. It requires calculation for non-cumulative values for more than 2000 periods in time. The most common reason for this is that the non-cumulative InfoCube has a very large validity interval and the query has no time restrictions. With exception aggregation AVERAGE (AV1 or AV2) in particular, this lack of time restriction would result in considerable memory and performance problems.
System Response
Query cannot be executed in this way.
Please suggest a possible reason for these errors.
Thanks and Regards.
Mudit KhannaHi,
See
Refer Notes 496638,571364
210432
528202
1318741
208546
and also see simila thread
Problem getting data from BF cube in report (Non cummulative keyfigures)
Thanks
Reddy -
0ADHOC error while executing the query from Report Designer
Hi All,
When I am executing The Query from Report Designer, am getting the below error.
Please help me in this regard.
The initial exception that caused the request to fail was:
The Web template "0ADHOC" does not exist in the master system
com.sap.ip.bi.base.exception.BIBaseRuntimeException: The Web template "0ADHOC" does not exist in the master system
at com.sap.ip.bi.webapplications.runtime.service.template.impl.TemplateService.getTemplateContent(TemplateService.java:57)
at com.sap.ip.bi.webapplications.runtime.jsp.portal.service.template.PortalTemplateAccessService.getTemplateContent(PortalTemplateAccessService.java:82)
at com.sap.ip.bi.webapplications.runtime.preprocessor.Preprocessor.parseTemplate(Preprocessor.java:163)
at com.sap.ip.bi.webapplications.runtime.xml.XmlTemplateAssembler.doInit(XmlTemplateAssembler.java:79)
at com.sap.ip.bi.webapplications.runtime.template.TemplateAssembler.init(TemplateAssembler.java:133)
Thanks,
KVRHi,
The web template 0ADHOC is usually the standard web template for 3.x queries. The Report Designer executes the reports in java web, thus tries to find the template 0ADHOC in the 7.0 templates and does not find it. Check whether you have maintained the standard web template 0ADHOC for 7.0 reports also:
Transaktion SPRO -> SAP Reference Image -> SAP NetWeaver -> Business Intelligence -> Settings for Reporting and Analysis -> Bex Web -> Set Standard Web Templates
Best regards,
Janine -
Error while executing the query in RSRT
Hi to all,
I am executing the query in client development system in RSRT.
Error coming (Query could not open Genun id is invalid)
I shall be thankfull to you for this.
Regards
Pavneet RanaHi,
Plz check ur report and execute at the designer and take its technical name and go to RSRT. log out and log in and try..
if not check ur authorisation.
Regards....KP -
Getting error while executing the query in query generator
Hi all
I need to execute on query where I set perameter ''delivery doc date'' but when I execute its giving me error
Please help
Error is :- 1) .[Microsoft][SQLSERVER NATIVE CLINT 10.0][SQL SERVER] MUST SPECIFY TABLE TO SELECT FROM ,2 [Microsoft][SQLSERVER NATIVE CLINT 10.0][SQL SERVER] STATMENT 'BLANKET AGREEMENT'(OOAT) (s) COULD NOT BE PREPARED .HELP
SELECT ELECT T0.[CardName] PartyName, T1.[Dscription] as 'Item description', T0.[NumAtCard] as 'Customer Ref No',
T1.[ShipDate] as 'Del Date', T0.[DocNum] as 'SO No', T0.[DocDate] as 'SO Date', T1.[Quantity],
T1.[Price],T1.[Quantity]*T1.[Price] as 'Line total without tax', ISNULL( T1.[DelivrdQty],0) As DelivrdQty,
ISNULL( T1.[DelivrdQty]*T1.[Price],0) as 'Delivered amount', T1.[OpenQty] as 'pending qty',
ISNULL((select sum(a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) from BMM_PNITEM A inner join bmm_PNFGALLOC B On A.PnRecordId = B.PNRecordId
and A.LineId = b.LineId and A.Linetype =7 and (a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) >0 and a.Status<>'C' and T1.ItemCode=A.ItemCode),0) as WIP,
ISNULL((select sum(a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) from BMM_PNITEM A inner join bmm_PNFGALLOC B On A.PnRecordId = B.PNRecordId
and A.LineId = b.LineId and A.Linetype =7 and (a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) >0 and a.Status<>'C' and T1.ItemCode=A.ItemCode),0)*T1.Price as Value
FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry join OCRD T3 on t3.CardCode=t0.CardCode
where T1.ShipDate between [%0]and [%1] and t3.groupCode in('115','116') ORDER BY T1.ShipDatehi
you need to use parameters.
try this:
/*select from [dbo].[RDR1] T1*/
DECLARE @FromDate datetime
/*where*/
set @FromDate =/* T2.ShipDate */N'[%0]'
/*select from [dbo].[RDR1] T1*/
DECLARE @ToDate datetime
/*where*/
set @ToDate =/* T2.ShipDate */N'[%0]'
SELECT T0.[CardName] PartyName, T1.[Dscription] as 'Item description', T0.[NumAtCard] as 'Customer Ref No',
T1.[ShipDate] as 'Del Date', T0.[DocNum] as 'SO No', T0.[DocDate] as 'SO Date', T1.[Quantity],
T1.[Price],T1.[Quantity]*T1.[Price] as 'Line total without tax', ISNULL( T1.[DelivrdQty],0) As DelivrdQty,
ISNULL( T1.[DelivrdQty]*T1.[Price],0) as 'Delivered amount', T1.[OpenQty] as 'pending qty'
ISNULL((select sum(a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) from BMM_PNITEM A inner join bmm_PNFGALLOC B On A.PnRecordId = B.PNRecordId
and A.LineId = b.LineId and A.Linetype =7 and (a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) >0 and a.Status<>'C' and T1.ItemCode=A.ItemCode),0) as WIP,
ISNULL((select sum(a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) from BMM_PNITEM A inner join bmm_PNFGALLOC B On A.PnRecordId = B.PNRecordId
and A.LineId = b.LineId and A.Linetype =7 and (a.ActualQtyDispUOM - a.IssuedReceivedQtyDispUOM ) >0 and a.Status<>'C' and T1.ItemCode=A.ItemCode),0)*T1.Price as Value
FROM ORDR T0 INNER JOIN RDR1 T1 ON T0.DocEntry = T1.DocEntry join OCRD T3 on t3.CardCode=t0.CardCode
where T1.ShipDate between @FromDate and @ToDate and t3.groupCode in('115','116') ORDER BY T1.ShipDate -
Receiving SQL Error: INTERNAL_ERROR while executing the query
Dear All,
I am receiving the below error while executing a query.
SQL Error: INTERNAL_ERROR
Diagnosis
The database system registered an SQL error. As available, the error number and a description are included in the short text. Possible causes for SQL errors include:
Overflow of database objects such as buffers, temporary tablespaces, rollback segments or data containers/tablespaces.
->These problems can generally be eliminated by system administrators.
Missing generated database objects such as tables or views based on inconsistent or inactive InfoCubes or InfoObjects. Examples of this include the view of the fact table for an InfoCube or the attribute SID table (X/Y table) of a characteristic.
-> These problems can generally be eliminated by a BW administrator.
SQL requests with incorrect content.
-> Problems of this type are generally programming errors.
System Response
Procedure
Contact your system administrator.
Procedure for System Administration
If there is no error description, look for one in the reference from the database producer.
Decide on the correct category for the SQL error and check if it can be eliminated. Generally the error can also be found in the syslog (transaction sm21). From there, transactions sm51 and sm50, the developer's trace log of the work process can be determined and the erroneous statement can be viewed in the log. This procedure is described in SAP Note 568768.
Notification Number DBMAN 257
I verified the table spaces and also done RSRV Repair of InfoObjects and InfoCubes and didnt find any error. But I am receiving this error for one particular month and remaining months are executing fine. Any ideas why i am receiving this error.
Regards
Ravi YOSS Note 1305568:
Symptom
A data mart query that
you want to execute within a data transfer process (DTP), for example, terminates with the
SQL error -1013 "Too many order columns".
The following is displayed in the monitor log of the data transfer process:
Error while extracting from source xxxxxx (type InfoProvider)
Message number RSBK 242
Exception CX_SQL_EXCEPTION occurred (program:
CL_SQL_STATEMENT==============CP, include:
CL_SQL_STATEMENT==============CM004, line: 32).
Message number RS_EXCEPTION 000
SQL error: POS(3306) Too many order columns
Message number DBMAN 257
Error reading the data of InfoProvider xxxxxx
Message number DBMAN 305
You have already implemented Note 1065380.
Other terms
CX_SQL_EXCEPTION, message number, RS_EXCEPTION 000, DBMAN 257, RSBK 242,
RS_EXCEPTION 000
Reason and Prerequisites
The MaxDB internal limit of 4016 bytes or 128 fields for GROUP BY columns was exceeded.
Solution
When you implement these corrections, no aggregation is performed for the data (GROUP BY) if the limits of the MaxDB database have been exceeded.
The limit values for the aggregation bahavior can also be manually reduced if there are problems with the default values.
Two RSADMIN parameters are provided for this.
MAXDB_MAX_GROUP_BY_FLDS is the maximum number of GROUP BY fields. The default value is 128.
MAXDB_MAX_GROUP_BY_LEN is the maximum total length of the GROUP BY fields. The default value is 4000.
SAP NetWeaver BI 7.00
Import Support Package 21 for SAP NetWeaver BI 7. 00 (SAPKW70021) into your BI system. The Support Package is available when Note 1270629"SAPBINews NW 7.00 BI Support Package 21", which describes this Support Package in more detail, is released for customers. -
Error while executing the workbook query.
Hi guyz
i'm getting an error while executing the workbook Query. The actual problem is there is a filter for REQUID in the query definition for removing the doble count. there is customer exit written. the report works fine in DEVELOPMENT but it is not working in quality.
The query on which this workbook is created is working fine, but the problem is when we execute the workbook i'm facing this issue.
we re-transported the queries but still we are facing the same problem.
while we execute the query we are prompted for variable entry(Optional) for date. when we press OK we get the below error
" NO SID value found for the value REQU_4DQT75Y2RJPVT4PXZ4LHC70V3 of characteristic"
the request is not available in the BW system. the request was deleted long back, but it is still referring to the same the request id
could someone please tell me where we went wrong and why we are getting this error.
Regards,
Anil VaddeHey ,I think data load to your target on which the query was based had some issue.
Can you check the data load to the data target.change the status of request concerned to red and delete.do reconstruct if neeed..I think the request had some issue.
Even you can go to RSRQ or RSMO and filter on the basis of this request and see its status.
Regards,
RK -
Error while running the query on web.
Hello Friends
I am getting the error message "Result set too large (1056716 cells); data retrieval restricted by configuration (maximum = 500000 cells)" while executing the query on the web in BI 2004s. How can this be resolved.
Any help in this regards is appreciated and points will be assigned.
Thanks.Hi Rishi,
Maybe your queries returned too large volume of data.
So, if possible,
1, create some filter on your query to reduce the transferred data
2, chaange your query structure (reduce the items on the column or low)
and your error message seemed to be generated from BEx Analyzer...
does web report have "cells"?
if BEx Analyzer, the limit of cells volume is inneviable.
and if you use BEx Web, do you know note1008619?
this note describe about the limit of data volume on web applications.
Hope it help,
Kanako -
Error While Executing The Queries
Hi Every Body,
Can Any One Explains Me About This Error And How To Rectify It,I Got This Error While Executing A query,In which We Are Using Customer Exit Varible For A Date Charectrstic..Im Getting This Error Before Entering In To Variable Screen.Error Is
Error An exception with the type CX_SY_ARITHMETIC_OVERFLOW occurred,but was ne
Error Overflow in the operation COLLECT
Please Help Me Out.
Thanks&Regards,
NagarjunAre you sure this was an error generated by MDM? This sounds like more of a netweaver based issue. You may try posting this in the Netweaver forum and give some more details on the system that you are running and the patch level.
-
Error while executing BEX query via FM
Hi Friends,
I am getting following error while executing a query via FM RRW3_GET_QUERY_VIEW_DATA.
Please see the error screenshot as follows.
the I_T_PARAMETERS entered are as follows.
Please let me know what is missing.
Thanks.
Regards,
Hrishikeshthe key date variable 0DAT is normally filled by a SAP exit variable, but this may not be the case. it could have been changed in the query designer, check the query in query designer and see.
Try passing 0DAT in the variable list with todays date -
Gettng Error while executing the procedure(oracle 10.2.0.3.0)
Hi all,
I am getting following error While executing the package .
PLS-00103: Encountered the symbol "Truncate" when expecting one of
the following:
* & = - + ; < / > at in is mod remainder not rem return
returning <an exponent (**)> <> or != or ~= >= <= <> and or
like LIKE2_ LIKE4_ LIKEC_ between into using || multiset bulk
member SUBMULTISET_I have written follwing query in the package body.
EXECUTE IMMEDIATE 'TRUNCATE TABLE FORT ';
EXECUTE IMMEDIATE '
INSERT INTO FORT (CID,CODE,DESC,SCODE,SES,T_DT,SDN,LANG)
SELECT
SERVICES.CID CID,
PROFILE.FUCODE CODE,
TO_DATE(SUBSTR(SERVICES.STAT_CHNG,-7,6),'YYMMDD') T_DT,
PHOR.NUM SDN,
C_ALL.cLANGUAGE LANG
FROM
SERVICES .....Please give me the solution for this .
Thank y ou
Edited by: user636482 on Apr 10, 2009 1:08 AMI am getting following errors if I gave " ' " after not null.
LINE/COL ERROR
42/8 PLS-00103: Encountered the symbol "AND" when expecting one of the
following:
begin case declare end exception exit for goto if loop mod
null pragma raise return select update while with
<an identifier> <a double-quoted delimited-identifier>
<a bind variable> << close current delete fetch lock insert
open rollback savepoint set sql execute commit forall merge
pipe
42/56 PLS-00103: Encountered the symbol "A" when expecting one of the
following:
LINE/COL ERROR
) , * & | = - + < / > at in is mod remainder not rem => ..
<an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
LIKE4_ LIKEC_ between || multiset member SUBMULTISET_
The symbol ", was inserted before "A" to continue.
42/74 PLS-00103: Encountered the symbol "D" when expecting one of the
following:
* & - + ; / at mod remainder rem return returning
<an exponent (**)> and or || multiset
The symbol "* was inserted before "D" to continue.
LINE/COL ERROR
45/6 PLS-00103: Encountered the symbol "COMMIT"
52/3 PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
of the following:
end not pragma final instantiable order overriding static
member constructor map
The symbol "static" was substituted for "PROCEDURE" to continue.
85/8 PLS-00103: Encountered the symbol "AND" when expecting one of the
following:
begin case declare end exception exit for goto if loop mod
null pragma raise return select update while with
LINE/COL ERROR
<an identifier> <a double-quoted delimited-identifier>
<a bind variable> << close current delete fetch lock insert
open rollback savepoint set sql execute commit forall merge
pipe
85/56 PLS-00103: Encountered the symbol "A" when expecting one of the
following:
) , * & | = - + < / > at in is mod remainder not rem => ..
<an exponent (**)> <> or != or ~= >= <= <> and or like LIKE2_
LIKE4_ LIKEC_ between || multiset member SUBMULTISET_
The symbol ", was inserted before "A" to continue.
LINE/COL ERROR
85/74 PLS-00103: Encountered the symbol "D" when expecting one of the
following:
* & - + ; / at mod remainder rem return returning
<an exponent (**)> and or || multiset
The symbol "* was inserted before "D" to continue.
88/8 PLS-00103: Encountered the symbol "COMMIT"
95/3 PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
of the following:
end not pragma final instantiable order overriding static
LINE/COL ERROR
member constructor map
The symbol "static" was substituted for "PROCEDURE" to continue.
133/3 PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
of the following:
end not pragma final instantiable order overriding static
member constructor map
The symbol "static" was substituted for "PROCEDURE" to continue.
169/3 PLS-00103: Encountered the symbol "PROCEDURE" when expecting one
of the following:with out adding " ' " I am getting the previous error which I mentioned in Previous thread(TRUNCATE)
Thank you -
ORA-27092 Error while executing any query from client
Hello
I am getting following error while executing any query from client remotly.
IAMDBA@TEST_OAT.ABCD > select userid from dual;
select userid from dual
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01116: error in opening database file 1
ORA-01110: data file 1: '/u01/prod/system/system01.dbf'
ORA-27092: size of file exceeds file size limit of the process
Additional information: 131071
Additional information: 286209
But while local connection,its working.hi,
ulimit command- Limit user resources
su - oracle
ulimit -n (this command will show you the current value for ulimit the default value is 1024)
to increase its value:---
ulimit -n <some value> ( this command will change value for current session only)
example
ulimit -n 101062
once done check the value as:--
ulimit -n( for verification)
search in google for more explanation or revert back to me for any suggestions.... :)
Edited by: varun4dba on Jan 31, 2011 4:09 PM -
Error while executing Bex Query
Hi all,
i am getting error while executing the Bex Query.i am able to change and save the Query without any issues.
Error:
<internal error> Receiving from the BW server failed.BW server raised exception:SYSTEM_FAILURE
Do you want to see more information?
YES--->Syntax error in Program SAPLY05BW_ISA
Details:
Error Group
RFC_ERROR_SYSTEM_FAILURE
Message
Syntax error in program SAPLY05BW_ISA
What could be the problem?pl help me out!
ThanksHi,
Try this:
Execute the report RSFTP005 in BIW.
With rgds,
Anil Kumar Sharma .P -
ORA-01008 Error while executing VO Query
HI,
I have a VO to get the heirarchy for the selected Business. On selecting appropriate business, ppr is fired to build up available heirarchies for that business. The query for VO is
SELECT pos.name ||' ('||DECODE(pos.primary_structure_flag,'Y','Primary', 'N', 'Non-Primary','')||')' name , posv.org_structure_version_id org_structure_version_id
FROM per_organization_structures pos,per_org_structure_versions posv
WHERE pos.business_group_id = :1
AND pos.organization_structure_id = posv.organization_structure_id
AND pos.business_group_id = posv.business_group_id
AND posv.date_to IS NULL
While executing the query, it throws ORA-01008 exception saying "Not all Variables are bound". During debugging i saw that the selected business group id is available in AM before calling the VO execution.
Any help will be appreciated.
Thanks,Hi Tapash,
The following is the information you have requested
1. VO defn from the xml file
<?xml version="1.0" encoding='windows-1252'?>
<!DOCTYPE ViewObject SYSTEM "jbo_03_01.dtd">
<ViewObject
Name="HierarchyVO"
BindingStyle="Oracle"
CustomQuery="true"
RowClass="ge.oracle.apps.per.orghierarchy.poplist.server.HierarchyVORowImpl"
ComponentClass="ge.oracle.apps.per.orghierarchy.poplist.server.HierarchyVOImpl"
MsgBundleClass="oracle.jbo.common.JboResourceBundle"
UseGlueCode="false" >
<SQLQuery><![CDATA[
SELECT pos.name ||' ('||DECODE(pos.primary_structure_flag,'Y','Primary', 'N', 'Non-Primary','')||')' name , posv.org_structure_version_id org_structure_version_id
FROM per_organization_structures pos,per_org_structure_versions posv
WHERE pos.business_group_id = :1
AND pos.organization_structure_id = posv.organization_structure_id
AND pos.business_group_id = posv.business_group_id
AND posv.date_to IS NULL
]]></SQLQuery>
<DesignTime>
<Attr Name="_isCodegen" Value="true" />
<Attr Name="_version" Value="9.0.3.12.53" />
<Attr Name="_CodeGenFlagNew" Value="36" />
</DesignTime>
<ViewAttribute
Name="Name"
IsPersistent="false"
Precision="44"
Type="java.lang.String"
AliasName="NAME"
ColumnType="VARCHAR2"
Expression="NAME"
SQLType="VARCHAR" >
<DesignTime>
<Attr Name="_DisplaySize" Value="44" />
</DesignTime>
</ViewAttribute>
<ViewAttribute
Name="OrgStructureVersionId"
IsPersistent="false"
IsNotNull="true"
Type="oracle.jbo.domain.Number"
AliasName="ORG_STRUCTURE_VERSION_ID"
ColumnType="VARCHAR2"
Expression="ORG_STRUCTURE_VERSION_ID"
SQLType="NUMERIC" >
<DesignTime>
<Attr Name="_DisplaySize" Value="22" />
</DesignTime>
</ViewAttribute>
</ViewObject>
2. the method in AM
public void getHierarchy(String strBusinessGrpId)
try
HierarchyVOImpl vo = getHierarchyVO1();
Number BusinessGroupId = new Number("0");
if(strBusinessGrpId!=null && !strBusinessGrpId.equals(""))
BusinessGroupId = new Number(strBusinessGrpId);
//vo.setWhereClause(null);
//vo.setWhereClauseParam(0,BusinessGroupId);
vo.executeQuery();
catch(Exception e)
throw new OAException(e.toString(),OAException.ERROR);
} //end of getHierarchy
3. calling code in CO
if ("changeBusiness".equals(pageContext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
String businessGrpId = pageContext.getParameter("BusinessGroup");
Serializable[] parameters = { businessGrpId };
mAM.invokeMethod("handleChangeBusiness", parameters);
mAM.invokeMethod("getHierarchy", parameters);
Thanks,
Mohammadi
Maybe you are looking for
-
HT1237 Where can I get firmware updates for a Mid 2007 Mac mini (Macmini2,1)?
The model for some reason is taken off of the firmware update support page. I found an archive of the page from 2011 and there seems to have been an update. My current SMC Version is 1.19f2 and the update was 1.3f4 but the strange thing is that when
-
Website logo needs to sit on top of backgropund image with no box
I am trying to create a logo with a transparnt background for my website, so my logo can sit on top of background images. I have created different file, png, gif, eps all with transparent backgrounds but everytime I upload it to my website builder (w
-
Hey whats up i just bought my Xfi elite pro about 3 days ago and is really amazing im using it for my recordings with the band and really works in a fine way but suddenly the line 2 input inthe front pannel doesnt works when i put the micro there I d
-
I am trying to refactor a piece of code that was originally designed using HTMLB to create a tree view role menu that invokes an event in another iView. My question is, can portal eventing be done with traditional JavaScript as opposed to using HTML
-
We're having a weird issue with Illustrator that rarely can be replicated. When we're saving a file as a PDF, sometimes the PDF gets cropped to the right and bottom and we're not quite sure why it's happening. Sometimes we'll just go an open the Illu