Error while executing the report to display on the web in BI 7.0?

Hi All,
In BI 7.0, Getting Error while executing the report to display on the web?
The error message displayed is:
" Network Access Message : The website cannot be found ".
Source: DNS error.
Why this error is coming.
Wht needs to be done.
Thanks in Advance.

Hi Kishore,
All the configurations are in proper shape.
We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
EP is not configured over here. Is that causing the problem.
Thansk in Advance.

Similar Messages

  • We are facing error while executing Bex report.

    Hi Gurus:
    We are facing error while executing Bex report.
    Messge :                                                                          
    u201CQuery 0: Runtime error program state check for conversation 05284411 / CP  with parallel processing via RFC
    Message no. DBMAN428u201D
    The query is based upon Multiprovider (based upon 2 basic cubes).
    Both cubes are partitioned by   info object 0CALMONTH, (valid range - 01.2005 - 012.2010).
    Those cubes are not containing any non-cumulative key figures and Service package level for  SAP NetWeaver BI 7.0 is  u2018SAPKW70012u2019.
    I have checked those cubes in RSRV and carry out following steps:
    "All Elementary Tests -> Transaction Data" and execute the repair "Consistency of the Time Dimension for an Info Cube"
    I have found system inconsistency like u201CRecord with the DIMID 2 contains non-fitting time characteristics u201C
    Detail ERROR:
    Record with the DIMID 2 contains non-fitting time characteristics
    Message no. RSCV053Diagnosis
    The data record of the time dimension table with the described DIMID contains values for time characteristics that do not fit together.
    I have found the u2018 Note 1130450 - Query displays error DBMAN 284; RSRV: Time dimension checku2019  for this but still not sure this will work or not .
    I tested this in dev server , didn't feel useful.
    Could you please let us know what to correct this error.
    Anwser will be rewared.
    Regards,

    >
    Surendra Pande wrote:
    > Anwser will be rewared.
    > Regards,
    Go read the RULES of these forums.

  • Error while executing a report

    Hi ,
    I have a problem while executing a report to brower as  ..
    ABEND: Program error in class SAPMSSY1 method : UNCAUGHT_EXCEPTION
    ABEND: System error in program SAPLRRI2 and form REP_QUELL_MOVE_01-01-
    The same query is execting in DEV, but it is not working in QA, it is showing the above message. Can you please send me some idea, how to solve this problem.
    In my reporting i am using 2 keyfigures, 2 formulae, 2 time char and 1 char.
    Thanks and Regards
    Rajesh

    Hello,
    Open the query in query designer and check the query and see wht detailed error message you get.
    Regds,
    Shashank

  • Error while executing a report from Planning

    Hi,
    I've got this error message when I execute a report from Hyperion Planning (web) :
    "5200: Error executing query. [1106] Error : Class component property name invalid[DataType]"
    Can you help me please ?
    Thanks.
    Virgile.

    I am not sure about it. But i remember once running into a similar issue where i made some changes in the metadata or outline and few members were dropped from the hierarchy and it came up with this error at the time of running
    the report as my report was still trying to query the dropped members. But u said you have already checked and all your members are valid on the report. Is this happening with all the reports or just one. If its all the reports i would
    restart the BI+ reporting services and then try to run the reports!

  • Dreamweaver CS5 error - While executing onLoad in Design Note_onOpen.htm, the following JavaScript e

    I'm on a Mac and can't get this fixed. I tried to look for any .dat files in en_US and configuration but didnt see any when I went through terminal as I read that one in there would cause this
    While executing onLoad in Design Note_onOpen.htm, the following JavaScript error(s) occurred:
    In file "Design Notes_onOpen": onOpen is not defined

    It seems that your configuration settings are corrupted. Use the documents below to re-create your user preferences.
    http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
    http://forums.adobe.com/thread/494811

  • Error while executing a report  in BI 7.0

    Hello Friends,
    My BI7.0 system  is a fresh installation.
    I  have  created a query using Nw2004s Bi Frontend-Bex Query Designer.
    After saving the changes when I click on Execute Button (in between Saveall & Check buttons) I am getting an error in the browser
    The page cant be displayed. & the URL is 
    http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.sap.ip.bi.bex?QUERY=IC_SLS_Q001&VARIABLE_SCREEN=X&DUMMY=1
    Is this URL correct one? Or do i need to make any further settings ? If so what are those settings & where they need to be done?
    Why am i not able to execute the Bex report in the browser?
    Please let me know
    Thanks
    mv_d

    Hi
    What do you mean by Install portal? Where should I install?
    While installing the server i have choosen the Usage type EP also!!
    Thanks
    mv_d

  • Error while executing WAD report

    Hi Gurus,
      While executing the wad report in the web getting an error, can u brief me, and provide me any step by step procedure for WAD template creation
    Reference to data provider "%NM%" is invalid
    In the Web Application Designer, create a data provider with the name %NM% in template ZDEMO_WAD, or change the reference to the data provider in Web item ANALYSIS_ITEM_1
    DROPDOWN_ITEM_1
    No reference To data provider defined
    In the Web Application Designer, set parameter DATA_PROVIDER_REF in template ZDEMO_WAD for Web item DROPDOWN_ITEM_1 to a valid data provider

    can u brief me, and provide me any step by step procedure for WAD template creation
    I believe you have already posted a Q on Dashboards
    Re: DashBords
    & many have responded with documentation links that can help. I suggest you take time to go thru' the links.
    Reference to data provider "%NM%" is invalid
    In the Web Application Designer, create a data provider with the name %NM% in template ZDEMO_WAD, or change the reference to the data provider in Web item ANALYSIS_ITEM_1
    You need to first create a Data Provider, say DP1, on either an InfoProvider/Query/QueryView to be able to bind it to any webitem in a WAD template. Once created, assign DP1 to ANALYSIS_ITEM_1 under Data Binding properties.
    No reference To data provider defined
    In the Web Application Designer, set parameter DATA_PROVIDER_REF in template ZDEMO_WAD for Web item DROPDOWN_ITEM_1 to a valid data provide
    Create DP2 first & then have it assigned to the DROPDOWN_ITEM_1 under Data Binding properties.

  • Error while executing a Report in Browser

    Every time I go into BI and try to run a GL report it never comes back with data.  It runs for a long time. The comes back blank for a long time, then finally it ends in error.
    Please help. As it is the end of the year I need the GL information on my PL. 
    I get the following:
    Action canceled
    Internet Explorer was unable to link to the Web page you requested. The page might be temporarily unavailable.
    Please try the following:
    •         Click the  Refresh button, or try again later.
    •         If you have visited this page previously and you want to view what has been stored on your computer, click File, and then click Work Offline.
    •         For information about offline browsing with Internet Explorer, click the Help menu, and then click Contents and Index.
    Internet Explorer

    Hi Kartikey,
    I am getting the datain browser itself but its taking more than 20min for each report to fetch the data.
    I tried running the reports thrgouh designer and data is coming in less time.
    Kindly suggest me why is it taking so much time while running from Browser.
    Thank you for your help.
    Praveen

  • Error while executing a report : Time limit exceeded

    Hello Experts,
    i have executed a report  and it took long time and finally throw an error saying that time limit is exceeded ,
    please suggest how to resolve the problem
    Thanks in Advance
    Nitya

    Hi Nitya H,
    There are many resons behind Time out issue.
    It is better to find where exaclty, our report is taking more time.
    Below are the some of the bottle necks we need to monitor for time out issue:
    1) OLAP query generation time.
    2) F4 Search time.
    3) Read Cache.
    4) Write Cache.
    Above features we can monitor @ RSRT transaction.
    If OLAP query generation time is taking much time means ,pls regenerate the query @ RSRT.
    For F4 search ,keep mater data as data retrival target.
    For Read Cache and Write Cache increase the query memory @ RSRT.
    Plse check the report and let me know if there is other bottle necks for query execution....
    _Note:_ This is just a high level view but we can have many performance drills...like Free char ,complex calculated key fig...etc..
    Hope this may helps you...
    Cheers,
    Maruthi

  • Getting an error while executing a report

    Hi,
    While generating a report through Tcode RSRT, I am getting an error message.
    Its showing ,
    "Element 3X7YU11DF0IQ7YARYGY0BU9ZN (version A) does not exist on the database".
    Can you please help me out in this.
    Thanks,
    Jyothi.

    Hi Jyothi,
        Did you make changes to the existing report or facing problem while creating new report? Either ways, it is something like some element of in the report has some realtion with others and that particular element is not there now. Just check if they are any exceptions or conditions in the report which were defined on the objects which were present earlier and removed later.
    Something similar to the above scenario might be the case.
    Hope this helps you....

  • Error while executing Crystal report in client computers

    I got this error message -2147206460 Crystal Reports Activex Designer invalid directory. any idea guys how can i fix this. I tried using Crystal Report viewer in the server and its working perfectly.
    thanks

    Michael Litiatco 
    is your report working on SAP from server machine or it only works on Crystal Report on server machine
    IF your report is working  on SAP server then, the problem is on sharing the .rpt file with client
    Place the .rpt file in shared folder whichi is accessable from all the clients then use that .rpt file in SAP CR addon and update it
    updating the path from each client system SAP towards shared .rpt file
    do you have any firewall installed, try disabling within your network and check
    This should Fix your problem
    make sure the printer is shared and correct printer is set as default printer
    if possible give a test print page from client to make sure the printer is online
    Regards
    Krish

  • Encountering Error while executing excel report in Reports 10g

    Hi,
    I have got Oracle 10g developer environment which has been implemented on Web browser through Oracle Jinitiator. I am running an excel report and encountering 105101: non-ORACLE exception -105101 when the output file exceeds a size of around 23MB. Where is this configuration done on Reports Server? Can we change this?

    Hi
    What do you mean by Install portal? Where should I install?
    While installing the server i have choosen the Usage type EP also!!
    Thanks
    mv_d

  • Getting timeout error while executing my report

    Hi experts,
    I need to get data from a Ztable which is having more than 64 millions of records. That query itself is taking more than 20 min to execute. I have used package size while retrieving tha data but still taking same time to execute, Giving me the TIMEOUT error .
    Provide some suggetions to use different types of SELECT quries that can be used to improve the performance.
    Thanks & Regards,
    Bhanu

    Hi ,
    I am working as an abaper for Service Management module.
    I need to show the prmise details inthe output of alv. Before that i need to get the meter reading details and need to do some calculations, by which i need to show idle one (Here only i need to hit a ZTABLE which is having more than 64 million records). For that idle premise user can select multiple pemises by using check boxes and can create notification by pressing a pushbutton 'CREATE IS NOTIFICATION' which exist on the application toolbar . So i can not run this report in background.
    Thanks & regards,
    Bhanu.

  • Portal runtime error while executing BI report through BEx Query designer

    I want to execute a query from query designer but when I execute it the following error occurs -
    Portal runtime error.
    An exception occurred while processing your request. Send the exception ID to your portal administrator.
    Exception ID: 04:30_30/04/11_0008_35740651
    Refer to the log file for details about this exception.
    I have checked log, the error displayig in log is,
    ACCESS ERROR: Authorization check for caller assignment to J2EE security role SAP_J2EE_Engine:administrator
    Kindly help me.
    regards
    nk

    Dear Friends
    I have the same with this problem
    Please help us to resolve this problem
    Thanks and best regards

  • Timed Out error while executing BI report in Portal

    Hi Experts,
    When we are trying to execute a BI report which returns over 9 lac records, it is taking lot of time to get executed and then its throwing the timed out error.
    Can anyone help me resolving the issue?
    Is this a problem with the performance of Portal server or its just due to the huge amount of records that are being retrieved?
    Thank You.
    Regards,
    Murthy.

    I havent got any solution regarding this. But, due to constraint regarding number of open Question in the forum, I am closing this and as there is not other way I am marking it as answered.
    Please suggest any other way to close the thread if this is not the right way.
    Thank You.

Maybe you are looking for

  • Cannot connect to the itunes store following update of itunes

    Have just updated my itunes on my Windows 7 (64 bit) computer. Now I cannot connect to the itunes store. Have checked firewall settings, all OK. My daughters computer (also windows 7 64 bit) is still working OK, but HAS NOT got the latest version of

  • Error while trying to install the addon

    Did anyone got this error before...... I just upgrade SAP B1 2004A SP00 PL13 to SAPB1 2005A SP01 PL41. Everything going ok, except addon cannot be install. It's prompt an error "An attempt was made to load a program with an incorrect format . (Except

  • Count Up

    I need some help on code to just have numbers count up from 100,000 to ?????? 1 count every 15 sec. THANK YOU -

  • Oracle standby/redo log file shipping keeps needing logs re-registering

    Hi We have Log File Shipping enabled and the prod system ships redo logs over to the LFS server. It's kept 24 hours behind. It usually ships the logs (and I believe automatically registers them) without issue. EXCEPT - it keeps complaining about miss

  • Newbie Adobe Captivate question

    :embarrassment; I assume I am doing something wrong and just don't realize - here is my issue. I have 2 ***.exe files that are training files created in captivate that I want to watch. They sort of play but don't. I see the starting screen but I don'