Error while executing Transaction S_ALR_87012043

Hi All,
I am getting the following error while running the Transaction S_ALR_87012043 - G/L Account Balances.
*Error Message: 'Variant SAP&001 of program RFSSLD00 is not the current version'
the long text says*
Variant SAP&001 of program RFSSLD00 is not the current version
Message no. DB634
Diagnosis
You attempted to start report RFSSLD00 using variant SAP&001. Since this variant was generated, the report SELECT-OPTIONS or PARAMETERs have changed considerably, i.e. the type or length no longer match and PARAMETERs have become SELECT-OPTIONS or vice versa. Many of these changes are so serious that even attempting to import the variant results in runtime errors.
Procedure
Adjust or delete the variant.
Is there any OSS notes available for this error??
Regards
Andrew

Thank You Ravi.
I got the OSS Notes specifically for that Error.
Note:1066048 - RFSSLD00: Variants obsolete.
Once again Thanks for your immediate reply.
Problem Solved.
Cheers
Andrew

Similar Messages

Runtime error while executing transaction BDLS

Hello,
While executing BDLS transaction for converting logical system names I am getting following error
Runtime Errors         CONVT_NO_NUMBER
Except.                CX_SY_CONVERSION_NO_NUMBER
Short text
     Unable to interpret "7,160 " as a number.
How to resolve the above problem?

Hi Rachel,
BDLS creates an ABAP program SBDLS* which includes all the tables possibly including logical system names as of the domain behind the table fields. This program firstly
lives in runtime only and is checked by syntax checker.
Now, sometimes tables have inconsistencies associated with them and you
will get this dump when a syntax check is performed on them.
So please check this and regenerate the culprit tables.
So please redo the steps for BDLS and check. There are
probably some tables which could be determined by you (syntax
check - in case program has already been saved only)
An easy way to check this is to run RBDLS2LS program (old BDLS) and
afterwards performing a syntax check on generated RBDLS*** (RBDLS<(>
<<)>(>
<<(><<)>)>ClientName>) program.
Known tables which caused such dumps in the past are:
DFKKCOLFILE_P_W
DFKKKO
DFKKMKO
DFKKREP06
DFKKREP06_S
DFKKREP07
DFKKREV06
DFKKREV07
Simply reactivate the tables you find out in SE11.
Another thing which has lead to this dump in the past is
in your R/3-System the value ' x ' is
additionally added to the value of your current release in the basis
release table SVERS.
The table RSBASIDOC takes the release value from the table SVERS.
If you change value 'x' to your release in both tables (SVERS and
RSBASIDOC) and
and activate again your source system connection. This could solve the
dump too.
I hope, this helps-if not, pls open a message with SAP.(component: BC-MID-ALE)
b.rgds, Bernhard

Error While Executing Transaction Through SSO

Hi Guys,
I am trying SSO between Portal 6.0 and BW 3.5
I have added my BW system into Portal, RFC as well as JCo is working fine.
While executing any transaction its giving me following error.
http://<host_name>:<Port>/sap/bc/gui/sap/its/webgui call was terminated because the corresponding service is not available.
The termination occurred in system <SID> with error code 403 and for the reason Forbidden.*
The selected virtual host was 0 .*
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:<host_name>_<SID>_<nr>-v:0-s:403-r:Forbidden
Appretiate your response
Regards,
Sachin

Sachin,
Please refer to these links, you can have a look at the check list to figure out if you might have forgotten or missed a step while configuring the SSO.
Single Sign On between EP6.0 and BW 3.5
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/sso%2bchecklist
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6535e690-0201-0010-6989-9e27386e1f24
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/portal+implementation&
http://help.sap.com/saphelp_nw2004s/helpdata/en/d3/41c8ecb31d11d5993800508b6b8b11/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a
Reward points if handy!
Cheers,
Sandeep

Error while executing transaction in logic editor

Hi all,
When i try to execute a transaction in logic editor in my system i get the following error.
[DEBUG]: Transaction Complete.
[ERROR]: Error executing transaction Status (403):ok
But when i try to exectue the same in a different system,the transaction is sucessfully executed.could anyone help me out with is issue!

U better try to clear the cache enteries and try this.it may help

Runtime Errors: CONVT_OVERFLOW while executing transaction sm66

Hello Everyone,
There are two Application serevrs out of which I am getting the following error while executing transaction SM66 only in one i.eCI server but if i remote login to other system and try SM66 its working fine.
Please suggest
Runtime Errors         CONVT_OVERFLOW
Exception              CX_SY_CONVERSION_OVERFLOW
Date and Time          02.04.2011 00:41:01
Short text
     Overflow when converting from "2.90113e+09"
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
      caught in
     procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", nor was it propagated by a RAISING
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     When attempting to convert the value "2.90113e+09",
     an overflow occurred.
     There is probably an error in the program
     "SAPLTHFB".
How to correct the error
     Probably the only way to eliminate the error is to correct the program.
     You may able to find an interim solution to the problem
     in the SAP note system. If you have access to the note system yourself,
     please use the following search criteria:
     "SAPLTHFB" "CONVT_OVERFLOW"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
    To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
    To obtain this, call the system log with Transaction SM21
    and select the "Print" function to print out the relevant
    part.
3. If the programs are your own programs or modified SAP programs,
    supply the source code.
    To do this, you can either use the "PRINT" command in the editor or
    print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
    or which actions and input led to the error.
The exception must either be prevented, caught within proedure
"TH_WP_DETAIL_INFO" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
tem environment
SAP-Release 700
Application server... "POSDMCI"
Network address...... ""
Operating system..... "SunOS"
Release.............. "5.10"
Hardware type........ "sun4u"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "POSDMDB"
Database type..... "ORACLE"
Database name..... "BP2"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 21:14:52"
create on........ "SunOS 5.9 Generic_117171-13
Database version. "OCI_101 "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE
SAP database version. 700
Operating system..... "SunOS 5.9, SunOS 5.10"
Memory consumption
Roll.... 16192
EM...... 8379696
Heap.... 0
Page.... 40960
MM Used. 720912
MM Free. 3466336
Information on where terminated
    Termination occurred in the ABAP program "SAPLTHFB" - in "TH_WP_DETAIL_INFO".
    The main program was "SAPMSM66 ".
    In the source code you have the termination point in line 82
    of the (Include) program "LTHFBU26".
    The termination is caused because exception "CX_SY_CONVERSION_OVERFLOW"
     occurred in
    procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", but it was neither handled locally
     nor declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPLTHFB "; its source code begins in line
    1 of the (Include program "LTHFBU26 ".

Hello Everyone,
There are two Application serevrs out of which I am getting the following error while executing transaction SM66 only in one i.eCI server but if i remote login to other system and try SM66 its working fine.
Please suggest
Runtime Errors         CONVT_OVERFLOW
Exception              CX_SY_CONVERSION_OVERFLOW
Date and Time          02.04.2011 00:41:01
Short text
     Overflow when converting from "2.90113e+09"
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
      caught in
     procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", nor was it propagated by a RAISING
      clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     When attempting to convert the value "2.90113e+09",
     an overflow occurred.
     There is probably an error in the program
     "SAPLTHFB".
How to correct the error
     Probably the only way to eliminate the error is to correct the program.
     You may able to find an interim solution to the problem
     in the SAP note system. If you have access to the note system yourself,
     please use the following search criteria:
     "SAPLTHFB" "CONVT_OVERFLOW"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
    To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
    To obtain this, call the system log with Transaction SM21
    and select the "Print" function to print out the relevant
    part.
3. If the programs are your own programs or modified SAP programs,
    supply the source code.
    To do this, you can either use the "PRINT" command in the editor or
    print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
    or which actions and input led to the error.
The exception must either be prevented, caught within proedure
"TH_WP_DETAIL_INFO" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
tem environment
SAP-Release 700
Application server... "POSDMCI"
Network address...... ""
Operating system..... "SunOS"
Release.............. "5.10"
Hardware type........ "sun4u"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "POSDMDB"
Database type..... "ORACLE"
Database name..... "BP2"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 21:14:52"
create on........ "SunOS 5.9 Generic_117171-13
Database version. "OCI_101 "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE
SAP database version. 700
Operating system..... "SunOS 5.9, SunOS 5.10"
Memory consumption
Roll.... 16192
EM...... 8379696
Heap.... 0
Page.... 40960
MM Used. 720912
MM Free. 3466336
Information on where terminated
    Termination occurred in the ABAP program "SAPLTHFB" - in "TH_WP_DETAIL_INFO".
    The main program was "SAPMSM66 ".
    In the source code you have the termination point in line 82
    of the (Include) program "LTHFBU26".
    The termination is caused because exception "CX_SY_CONVERSION_OVERFLOW"
     occurred in
    procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", but it was neither handled locally
     nor declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPLTHFB "; its source code begins in line
    1 of the (Include program "LTHFBU26 ".

Error while executing the CKMLCP (Actual Costing) Transaction

Hi Expert,
I am getting the following Error while executing the CKMLCP (Actual Costing) Transaction through my User ID in system. If we execute the same transaction with other user id then there is no Error. same role is assign to both user. Try to check SU53 screen shot but it show no error
See the below error for referance:-
Internal error in program SAPLCKML_RUN_COCKPIT_ACT
Message no. CKMLRUN004
Diagnosis
An unexpected situation has appeared in program SAPLCKML_RUN_COCKPIT_ACT.
The problem has to do with a program error - the indirect result of a program error or an inconsistency in Customizing.
System Response
Processing had to be terminated.
Procedure
Inform your system administrator
Thanks
Dinesh

Hi Shyam,
Thanks Shyam,
I check this note this is not applicable for my system, In mention note Correction delivered in Support Package 600.
but support Package in my system SAP_APPL 603 SAPKH60303,
Is there any other note or solution for 603 SP
Thanks
Dinesh

Error while executing the application

Hi Friends,
I am getting error while executing the application.The error is
"javax.ejb.EJBException: Transaction aborted; nested exception is: javax.transaction.RollbackException: Transaction marked for rollback."
Can anybody help me..
Thanks in advance.

You need to step through a debugger and find the source of your problem as something is clearly going wrong and causing the transaction to roll back. That is all that message tells us.
m

Error while executing report : Error in program CL_RSR_RRK0_CURR

Hi Gurus,
I am getting an error while executing a report.This error is only for one date seletion. For other selections report runs fine.Below is the error description & long text.
Please let me know if you have any solution on this.
A System error in program CL_RSR_RRK0_CURR and form FILL_CUDIM_02-04.
System error in program CL_RSR_RRK0_CURR and form FILL_CUDIM_02-04- (see long text)
Message no. BRAIN299
Diagnosis
This internal error is an intended termination resulting from a program state that is not
permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in
the planning modeler, and if you can reproduce this termination, record a trace (transaction
RSTT).
For more information about recording a trace, see the documentation for the trace tool
environment as well as SAP Note 899572
Thanks,
Prasanna N.

Hi Prasanna,
Check the below SAp Note:
SAP Note : 1030657
Thanks,
Vijay.

We are facing error while executing Bex report.

Hi Gurus:
We are facing error while executing Bex report.
Messge :
u201CQuery 0: Runtime error program state check for conversation 05284411 / CP with parallel processing via RFC
Message no. DBMAN428u201D
The query is based upon Multiprovider (based upon 2 basic cubes).
Both cubes are partitioned by info object 0CALMONTH, (valid range - 01.2005 - 012.2010).
Those cubes are not containing any non-cumulative key figures and Service package level for SAP NetWeaver BI 7.0 is u2018SAPKW70012u2019.
I have checked those cubes in RSRV and carry out following steps:
"All Elementary Tests -> Transaction Data" and execute the repair "Consistency of the Time Dimension for an Info Cube"
I have found system inconsistency like u201CRecord with the DIMID 2 contains non-fitting time characteristics u201C
Detail ERROR:
Record with the DIMID 2 contains non-fitting time characteristics
Message no. RSCV053Diagnosis
The data record of the time dimension table with the described DIMID contains values for time characteristics that do not fit together.
I have found the u2018 Note 1130450 - Query displays error DBMAN 284; RSRV: Time dimension checku2019 for this but still not sure this will work or not .
I tested this in dev server , didn't feel useful.
Could you please let us know what to correct this error.
Anwser will be rewared.
Regards,

>
Surendra Pande wrote:
> Anwser will be rewared.
> Regards,
Go read the RULES of these forums.

Runtime Error While executing the WebDynpro Application

I am getting the Runtime Error While executing the WebDynpro Application. The error message is "TSV_TNEW_OCCURS_NO_ROLL_MEMORY".
It says like "
Short text
    No roll storage space of length 9728 available for OCCURS area.
What happened?
    Each transaction requires some main memory space to process
    application data. If the operating system cannot provide any more
    space, the transaction is terminated.
But while executing some other Web Dynpro Applications, i am not facing this problem.

Generally this error is a result of an infinite loop on internal table or select endselect statement where by severs temporary memory gets full. With no memory to insert new records in temporary memory system generates the dump.
Check your application or ask basis consultant to look at the memory parameters in instance profile.
Regards
Rohit Chowdhary

Error while executing Bapi_Alm_Order_Maintain...

Hi All,
I'm getting this error while executing Bapi_Alm_Order_Maintain.
"BAPI call-up must have a SAVE or DIALOG method"
The following is the input data structures:
IT_METHOD
RefNumber    ObjectType Method   ObjectKey
1          HEADER      CREATE       %00000000001
1          OPERATION      CREATE       %00000000001
IT_HEADER
OrderId      Order_Type   Short_Text   Priority   Mn_Wk_Ctr Wbs_Elem
%00000000001 ZWO1       Test            3       1010       00000101
IT_OPERATION
Activity Sub_Activity Description Work_Cntr Plant Control_Key
0010        0010             Test          TS-1074           ZWO1
What I need to do to create a work order transaction?
Thanks
Sundar

Try adding following line in IT_METHODS after OPERATION.
RefNumber     ObjectType        Method        ObjectKey
1                                            SAVE          %00000000001
Reward points for all the helpful answers.

Error while executing query through rsrt

hello experts,
I am facing following error while executing one HR query through rsrt.
"System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text) "
while executing query through rsrt it automatically goes to debug mode, coming out of debug mode i get the screan showing above error message.
What would be an issue?
Regards,
Nirav
Edited by: Nirav Shah on Apr 21, 2008 8:19 AM

Hi ramesh,
I havent kept any execlusion selection. Though i saw long text, it is like this:
"Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
Notification Number BRAIN 299 "
Regards,
Nirav

BAM Deployment error - Microsoft.BizTalk.Bam.Management.BamManagerException: The BAM deployment failed. --- Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server "ServerName".

HI,
I am getting below error while deploying BAM activity ...Pls help me resolve this issue.
Microsoft.BizTalk.Bam.Management.BamManagerException: The BAM deployment failed. ---> Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server
"ServerName". ---> System.Data.SqlClient.SqlException: An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or
[] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed.
Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias
to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An
object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column
name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing
or empty. For SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For
SELECT INTO statements, verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements,
verify each column has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column
has a name. For other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For
other statements, look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name.An object or column name is missing or empty. For SELECT INTO statements, verify each column has a name. For other statements,
look for empty alias names. Aliases defined as "" or [] are not allowed. Change the alias to a valid name. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock,
Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady) at
System.Data.SqlClient.SqlCommand.RunExecuteNonQueryTds(String methodName, Boolean async, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean
sendToPipe, Int32 timeout, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteBatches(String cmdText) at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteNonQuery(String
cmdText, CommandType cmdType, Boolean inTransaction, Transaction transaction) --- End of inner exception stack trace --- at Microsoft.BizTalk.Bam.Management.SqlHelper.ExecuteNonQuery(String cmdText, CommandType cmdType, Boolean inTransaction,
Transaction transaction) at Microsoft.BizTalk.Bam.Management.ViewModule.Create(XmlDocument defXmlDoc) at Microsoft.BizTalk.Bam.Management.WorkerModule.DispatchOperation(OperationType operation, XmlDocument defXmlDoc) at
Microsoft.BizTalk.Bam.Management.BamManager.ProcessOneBamArtifactType(BamArtifactType bamArtifact, OperationType operation) at Microsoft.BizTalk.Bam.Management.BamManager.ManageInfrastructure(OperationType operation) at Microsoft.BizTalk.Bam.Management.BamManager.Deploy()
--- End of inner exception stack trace --- at Microsoft.BizTalk.Bam.Management.BamManager.Deploy() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.HandleDeployAll() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.DispatchCommand()
at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Run() at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Main(String[] args)

Your View Name, OLAP Cube Name and certain other restrictions listed @http://msdn.microsoft.com/en-us/library/aa561577.aspx
Please review your BAM Definitons.
Regards.

Error while executing a DTP

Hi All ,
I got an error while executing a DTP. Short Dump analysis points this error. : DBIF_REPO_SQL_ERROR.
Please provide in your valuable inputs to resolve this error.
Thank & Regards,
Rohit Garg

This error comes majorly when you have a deadlock in your code. Check ST22 if you have any short dump corresponding to it and see the source code where it is getting stuck.
If you find this dump explaining table space issue, then contact Basis, they will be able to help you with table space problem.
Edited by: Deepmala Agarwal on Aug 18, 2009 7:40 AM

Error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable

error while executing script for sharepoint online (office 365) - the remote server returned an error: (503) server unavailable.
I am creating many site collections reading records from sharepoint list using powershell in sharepoint online tenant (office 365).
Few site collections are created and then getting above error so this error record will be skipped then few succeeding record processed then again getting error.
pattern is like:
success
success
success
success
Error
success
success
success
success
success
success
error
success

Hi,
As it is an online environment, to troubleshoot this issue in an easier way, I suggest you contact Office 365 Support to see if there is any useful information in
the log files in the server side:
https://support.office.com/en-us/article/Contact-Office-365-for-business-support-32a17ca7-6fa0-4870-8a8d-e25ba4ccfd4b?ui=en-US&rs=en-US&ad=US
Best regards
Patrick Liang
TechNet Community Support

Error while executing Transaction S_ALR_87012043

Similar Messages

Maybe you are looking for