Error While Executing Transaction Through SSO
Hi Guys,
I am trying SSO between Portal 6.0 and BW 3.5
I have added my BW system into Portal, RFC as well as JCo is working fine.
While executing any transaction its giving me following error.
http://<host_name>:<Port>/sap/bc/gui/sap/its/webgui call was terminated because the corresponding service is not available.
The termination occurred in system <SID> with error code 403 and for the reason Forbidden.*
The selected virtual host was 0 .*
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:<host_name>_<SID>_<nr>-v:0-s:403-r:Forbidden
Appretiate your response
Regards,
Sachin
Sachin,
Please refer to these links, you can have a look at the check list to figure out if you might have forgotten or missed a step while configuring the SSO.
Single Sign On between EP6.0 and BW 3.5
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/sso%2bchecklist
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/6535e690-0201-0010-6989-9e27386e1f24
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/ep/portal+implementation&
http://help.sap.com/saphelp_nw2004s/helpdata/en/d3/41c8ecb31d11d5993800508b6b8b11/content.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a
Reward points if handy!
Cheers,
Sandeep
Similar Messages
-
Error while executing query through rsrt
hello experts,
I am facing following error while executing one HR query through rsrt.
"System error in program SAPLRRI2 and form REP_ASSIGN_INITIAL_OPT-01- (see long text) "
while executing query through rsrt it automatically goes to debug mode, coming out of debug mode i get the screan showing above error message.
What would be an issue?
Regards,
Nirav
Edited by: Nirav Shah on Apr 21, 2008 8:19 AMHi ramesh,
I havent kept any execlusion selection. Though i saw long text, it is like this:
"Diagnosis
This internal error is an intended termination resulting from a program state that is not permitted.
Procedure
Analyze the situation and inform SAP.
If the termination occurred when you executed a query or Web template, or during interaction in the planning modeler, and if you can reproduce this termination, record a trace (transaction RSTT).
For more information about recording a trace, see the documentation for the trace tool environment as well as SAP Note 899572.
Notification Number BRAIN 299 "
Regards,
Nirav -
Runtime error while executing transaction BDLS
Hello,
While executing BDLS transaction for converting logical system names I am getting following error
Runtime Errors CONVT_NO_NUMBER
Except. CX_SY_CONVERSION_NO_NUMBER
Short text
Unable to interpret "7,160 " as a number.
How to resolve the above problem?Hi Rachel,
BDLS creates an ABAP program SBDLS* which includes all the tables possibly including logical system names as of the domain behind the table fields. This program firstly
lives in runtime only and is checked by syntax checker.
Now, sometimes tables have inconsistencies associated with them and you
will get this dump when a syntax check is performed on them.
So please check this and regenerate the culprit tables.
So please redo the steps for BDLS and check. There are
probably some tables which could be determined by you (syntax
check - in case program has already been saved only)
An easy way to check this is to run RBDLS2LS program (old BDLS) and
afterwards performing a syntax check on generated RBDLS*** (RBDLS<(>
<<)>(>
<<(><<)>)>ClientName>) program.
Known tables which caused such dumps in the past are:
DFKKCOLFILE_P_W
DFKKKO
DFKKMKO
DFKKREP06
DFKKREP06_S
DFKKREP07
DFKKREV06
DFKKREV07
Simply reactivate the tables you find out in SE11.
Another thing which has lead to this dump in the past is
in your R/3-System the value ' x ' is
additionally added to the value of your current release in the basis
release table SVERS.
The table RSBASIDOC takes the release value from the table SVERS.
If you change value 'x' to your release in both tables (SVERS and
RSBASIDOC) and
and activate again your source system connection. This could solve the
dump too.
I hope, this helps-if not, pls open a message with SAP.(component: BC-MID-ALE)
b.rgds, Bernhard -
Error while executing transaction in logic editor
Hi all,
When i try to execute a transaction in logic editor in my system i get the following error.
[DEBUG]: Transaction Complete.
[ERROR]: Error executing transaction Status (403):ok
But when i try to exectue the same in a different system,the transaction is sucessfully executed.could anyone help me out with is issue!U better try to clear the cache enteries and try this.it may help
-
Error while executing Transaction S_ALR_87012043
Hi All,
I am getting the following error while running the Transaction S_ALR_87012043 - G/L Account Balances.
*Error Message: 'Variant SAP&001 of program RFSSLD00 is not the current version'
the long text says*
Variant SAP&001 of program RFSSLD00 is not the current version
Message no. DB634
Diagnosis
You attempted to start report RFSSLD00 using variant SAP&001. Since this variant was generated, the report SELECT-OPTIONS or PARAMETERs have changed considerably, i.e. the type or length no longer match and PARAMETERs have become SELECT-OPTIONS or vice versa. Many of these changes are so serious that even attempting to import the variant results in runtime errors.
Procedure
Adjust or delete the variant.
Is there any OSS notes available for this error??
Regards
AndrewThank You Ravi.
I got the OSS Notes specifically for that Error.
Note:1066048 - RFSSLD00: Variants obsolete.
Once again Thanks for your immediate reply.
Problem Solved.
Cheers
Andrew -
Error while executing servlet through a HyperLink.
Hi
When i am trying to execute a servlet through the HyperLink using this statement
where CallStatusDetailsAssign is my servlet.then i am getting this error :
The Following is the Alert Message.
1. Microsoft InterNet Explorer
http://localhost:8080/examples/servlets/CallStatusDetails?Call_ID=1&EMP_NO=1
** Download of the specified Resource has failed.
& also getting this error:
2. IE Cannot open the Internet Site
** Operation has been Cancelled.
If i refresh the screen by clicking on refresh button in the Internet Explorer.the Page is getting displayed properly.
Is there any problem with my servlet code ??or some other Problem.
Can Anyone Please help me on this & give me the Solution for my Problem.
RashmiI'm not sure if this is cause of your problem but the anchor tag should look like this:
some text</ a>
... in the code the quotes are missing
spieler -
Getting Error while executing shell through Demantra workflow
Hi All,
I created .sh file(shell script) for sftp(transfer file from one instance to another instance) and created new workflow with executable step.
In command line I have given file path and file name(Example: /folder/data/bin/abc.sh). When I try to run this workflow by clicking start button it is not running. That current step is marked with red color. and below error I am getting.could u please help me
Error description 'Process terminated with errors ,please check the process logs for more
information.'
2013-10-31 05:42:02,307 CET [WFProcess_39] ERROR dpweb.general: ######################################################################################
2013-10-31 05:42:02,308 CET [Mail_Thread] ERROR workflow.steps: MailThread:run()::No Sender or Reciever
2013-10-31 05:42:02,323 CET [Mail_Thread] ERROR workflow.steps: MailThread:run()::No Sender or Reciever
2013-10-31 05:44:00,391 CET [ExeStepExecutionThread] FATAL workflow.general: java.io.IOException: /data/nani/bin/sh: not found
java.io.IOException: java.io.IOException: /data/nani/bin/sh: not found
at java.lang.UNIXProcess.<init>(UNIXProcess.java:148)
at java.lang.ProcessImpl.start(ProcessImpl.java:65)
at java.lang.ProcessBuilder.start(ProcessBuilder.java:451)
at java.lang.Runtime.exec(Runtime.java:591)
at java.lang.Runtime.exec(Runtime.java:429)
at java.lang.Runtime.exec(Runtime.java:326)
at com.demantra.workflow.step.ExeStep.run(ExeStep.java:336)
at java.lang.Thread.run(Thread.java:595)
When I try to run the same script through putty its working fine but not through demantra workflow.Dear DeetiNaresh,
Sorry I don't have a solution for this problem. But I am having this same issue. And this is only hit I have found for this issue in metalink or google. Incase your issue is resolved, it would be of great help to me, if you could post your resolution for this.
Thanks. -
Error while executing SQL through Java snippet in ADF
Hi,
I am taking inputs taken from user using ADF UI and storing this input data in XML File.With this Input.xml, I build a sql Query and execute using java program within the same ADF application.
I am getting following error:
java.sql.SQLException: SQL string is not Query
If I run the Java program with the same Input.xml separately, it doesnot error out.
Any help would be great
Thanks
SushamaHi Sushama,
We require more information to provide you with a more accurate solution:
1- Do you have a business method (on your Application Module or Session Bean) where you create the query? Can you try to test this method on a TestClient java class or AM Tester if applicable and validate the method works without a problem.
2-On your viewController project set the following argument to your run setting -Djbo.debugoutput=console. This in order to check what kind of SQL statement is being generated.
For more information on debugging please go to: http://www.oracle.com/technology/products/jdev/tips/muench/debugger/index.html
-Juan Camilo -
Runtime Errors: CONVT_OVERFLOW while executing transaction sm66
Hello Everyone,
There are two Application serevrs out of which I am getting the following error while executing transaction SM66 only in one i.eCI server but if i remote login to other system and try SM66 its working fine.
Please suggest
Runtime Errors CONVT_OVERFLOW
Exception CX_SY_CONVERSION_OVERFLOW
Date and Time 02.04.2011 00:41:01
Short text
Overflow when converting from "2.90113e+09"
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
caught in
procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When attempting to convert the value "2.90113e+09",
an overflow occurred.
There is probably an error in the program
"SAPLTHFB".
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
please use the following search criteria:
"SAPLTHFB" "CONVT_OVERFLOW"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within proedure
"TH_WP_DETAIL_INFO" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
tem environment
SAP-Release 700
Application server... "POSDMCI"
Network address...... ""
Operating system..... "SunOS"
Release.............. "5.10"
Hardware type........ "sun4u"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "POSDMDB"
Database type..... "ORACLE"
Database name..... "BP2"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 21:14:52"
create on........ "SunOS 5.9 Generic_117171-13
Database version. "OCI_101 "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE
SAP database version. 700
Operating system..... "SunOS 5.9, SunOS 5.10"
Memory consumption
Roll.... 16192
EM...... 8379696
Heap.... 0
Page.... 40960
MM Used. 720912
MM Free. 3466336
Information on where terminated
Termination occurred in the ABAP program "SAPLTHFB" - in "TH_WP_DETAIL_INFO".
The main program was "SAPMSM66 ".
In the source code you have the termination point in line 82
of the (Include) program "LTHFBU26".
The termination is caused because exception "CX_SY_CONVERSION_OVERFLOW"
occurred in
procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLTHFB "; its source code begins in line
1 of the (Include program "LTHFBU26 ".Hello Everyone,
There are two Application serevrs out of which I am getting the following error while executing transaction SM66 only in one i.eCI server but if i remote login to other system and try SM66 its working fine.
Please suggest
Runtime Errors CONVT_OVERFLOW
Exception CX_SY_CONVERSION_OVERFLOW
Date and Time 02.04.2011 00:41:01
Short text
Overflow when converting from "2.90113e+09"
Error analysis
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
caught in
procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", nor was it propagated by a RAISING
clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
When attempting to convert the value "2.90113e+09",
an overflow occurred.
There is probably an error in the program
"SAPLTHFB".
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
please use the following search criteria:
"SAPLTHFB" "CONVT_OVERFLOW"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
To obtain this, call the system log with Transaction SM21
and select the "Print" function to print out the relevant
part.
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, you can either use the "PRINT" command in the editor or
print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
The exception must either be prevented, caught within proedure
"TH_WP_DETAIL_INFO" "(FUNCTION)", or its possible occurrence must be declared
in the
RAISING clause of the procedure.
To prevent the exception, note the following:
tem environment
SAP-Release 700
Application server... "POSDMCI"
Network address...... ""
Operating system..... "SunOS"
Release.............. "5.10"
Hardware type........ "sun4u"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 1
Shortdump setting.... "full"
Database server... "POSDMDB"
Database type..... "ORACLE"
Database name..... "BP2"
Database user ID.. "SAPSR3"
Char.set.... "C"
SAP kernel....... 700
created (date)... "Apr 2 2006 21:14:52"
create on........ "SunOS 5.9 Generic_117171-13
Database version. "OCI_101 "
Patch level. 52
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE
SAP database version. 700
Operating system..... "SunOS 5.9, SunOS 5.10"
Memory consumption
Roll.... 16192
EM...... 8379696
Heap.... 0
Page.... 40960
MM Used. 720912
MM Free. 3466336
Information on where terminated
Termination occurred in the ABAP program "SAPLTHFB" - in "TH_WP_DETAIL_INFO".
The main program was "SAPMSM66 ".
In the source code you have the termination point in line 82
of the (Include) program "LTHFBU26".
The termination is caused because exception "CX_SY_CONVERSION_OVERFLOW"
occurred in
procedure "TH_WP_DETAIL_INFO" "(FUNCTION)", but it was neither handled locally
nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLTHFB "; its source code begins in line
1 of the (Include program "LTHFBU26 ". -
Error while executing the CKMLCP (Actual Costing) Transaction
Hi Expert,
I am getting the following Error while executing the CKMLCP (Actual Costing) Transaction through my User ID in system. If we execute the same transaction with other user id then there is no Error. same role is assign to both user. Try to check SU53 screen shot but it show no error
See the below error for referance:-
Internal error in program SAPLCKML_RUN_COCKPIT_ACT
Message no. CKMLRUN004
Diagnosis
An unexpected situation has appeared in program SAPLCKML_RUN_COCKPIT_ACT.
The problem has to do with a program error - the indirect result of a program error or an inconsistency in Customizing.
System Response
Processing had to be terminated.
Procedure
Inform your system administrator
Thanks
DineshHi Shyam,
Thanks Shyam,
I check this note this is not applicable for my system, In mention note Correction delivered in Support Package 600.
but support Package in my system SAP_APPL 603 SAPKH60303,
Is there any other note or solution for 603 SP
Thanks
Dinesh -
Error while executing the stored procedure through sender JDBC adapter
Hi All,
I am getting below error while executing the stored procedure through sender JDBC adapter.
Database-level error reported by JDBC driver while executing statement 'exec SapgetNextEntity 'SalesOrder''. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: The statement did not return a result set.'. For details, contact your database server vendor.
what is the problem? any idea to anyone...
regards
Rameshhi Dharamveer,
I am not getting below statement for your reply
Try to use Refrence Cursor it will return u reference of resultset.
I mention SP like this
exec SapgetNextEntity 'SalesOrder'
SapgetNextEntity -
> SP Name
SalesOrder----
> Parameter I am passing...
regards
Ramesh -
MDX Query Returns Error while Executing this from SSMS through openquery
Hi I'm getting this kind of Error while executing this ..
Pls help to get it solve .Hi Ashish,
According to your screenshot, it seems you can create a linked server from a SQL Server to the SSAS server, then use OpenQuery to get Analysis Services database structure, right? In this case, please ensure tha you setting is correctly, here is blog which
describe how to do it step by step, please refer to the link below to see the details.
http://dwbi1.wordpress.com/2010/01/01/ssas-dmv-dynamic-management-view/
http://www.ssas-info.com/VidasMatelisBlog/144_using-ssrs-to-report-ssas-2008-database-structure-using-dmvs#more-144
Hope this helps.
Regards,
Charlie Liao
TechNet Community Support -
Error while executing the application
Hi Friends,
I am getting error while executing the application.The error is
"javax.ejb.EJBException: Transaction aborted; nested exception is: javax.transaction.RollbackException: Transaction marked for rollback."
Can anybody help me..
Thanks in advance.You need to step through a debugger and find the source of your problem as something is clearly going wrong and causing the transaction to roll back. That is all that message tells us.
m -
Error while executing the rule session
Hi, I am using Oracle Business Rules Engine 10.1.3.3.0.I am developing rules using XML Facts.I am using a complex type array schema and binding it to define XML facts.Earlier the depth of the schema is 1 and it worked fine,now our schema's depth is 2 and while binding this schema is also working fine.The sample structure of the present schema I am binding is
<xsd:schema>
<xsd:element name = 'ruleRepository' type = 'RuleRepositoryType'/>
<xsd:complexType name='RuleRepositoryType'>
<xsd:sequence>
<xsd:element ='ruleFacts' type='RuleFactsType' minOccurs='0' maxOccurs='unbounded'/>
</xsd:sequence>
</xsd:complexType>
<xsd:complexType name='RuleFactsType'>
<xsd:sequence>
<xsd:element name='fact1' type='xsd:string'/>
<xsd:element name='fact2' type='xsd:string'/>
<xsd:element name='fact3' type='xsd:string'/>
<xsd:element name='fact4' type='Fact4' minOccurs='0' maxOccurs='unbounded'/>
<xsd:sequence/>
</xsd:complexType>
<xsd:complexType name='Fact4'>
<xsd:sequence>
<xsd:element name='element1' type='xsd:string'/>
<xsd:element name='element2' type='xsd:string'/>
</xsd:sequence>
</xsd:complexType>
</xsd:schema>
Earlier I have binded the similar schema as above but without 'fact4'.It went well and the rules were executing fine.
However when I am trying to bind a similar schema like the above one, its binding fine but when executing from the BPEL Process,its giving errors like,
"Error Caching Decision Services metadata,fact3 is undefined in DM,line6,Column 12",
Please note that I am using fact1 and fact2 only for defining the rules , I am niether using fact3 which is a simple type nor fact4 which is a complex type.
I have asserted Package.RuleRepositoryType in the definitions of the rule author.I have tried with different combinations of assertions but no one worked.
The above error(
"Error Caching Decision Services metadata,fact3 is undefined in DM,line6,Column 12") is coming for the first run of the decision service only,in the next runs its giving another error,which is like
<2008-04-10 07:52:30,772> <ERROR> <default.collaxa.cube.services> <::> ORABPEL-36333
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::>
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> Error while executing the rule session.
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> The rule session {0} failed to execute.
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> Check the underlying exception and correct the error. Contact oracle support if error is not fixable.
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::>
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.rpi.oracle.OracleRuleSession.execute(OracleRuleSession.java:251)
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.impl.DecisionServiceImpl.process(DecisionServiceImpl.java:1385)
<2008-04-10 07:52:30,773> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.impl.DecisionServiceImpl.assertExecuteWatchStateless(DecisionServiceImpl.java:546)
<2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.invoke_assertExecuteWatchStateless(BookOrderDecisionSOAPBinding_Tie.java:162)
<2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.processingHook(BookOrderDecisionSOAPBinding_Tie.java:457)
<2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.StreamingHandler.handle(StreamingHandler.java:297)
<2008-04-10 07:52:30,774> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.JAXRPCProcessor.doEndpointProcessing(JAXRPCProcessor.java:413)
<2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
<2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.JAXRPCProcessor.doRequestProcessing(JAXRPCProcessor.java:277)
<2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
<2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.JAXRPCProcessor.doService(JAXRPCProcessor.java:134)
<2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
<2008-04-10 07:52:30,783> <ERROR> <default.collaxa.cube.services> <::> at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
<2008-04-10 07:52:30,784> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
<2008-04-10 07:52:30,801> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at java.lang.Thread.run(Thread.java:595)
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> Caused by: java.lang.NullPointerException
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.rpi.oracle.RuleSessionPool.getSession(RuleSessionPool.java:463)
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> at oracle.bpel.services.rules.rpi.oracle.OracleRuleSession.execute(OracleRuleSession.java:224)
<2008-04-10 07:52:30,802> <ERROR> <default.collaxa.cube.services> <::> ... 26 more
<2008-04-10 07:52:30,803> <ERROR> <oracle.bpel.services> <::>
java.lang.NullPointerException
at oracle.bpel.services.rules.rpi.oracle.RuleSessionPool.getSession(RuleSessionPool.java:463)
at oracle.bpel.services.rules.rpi.oracle.OracleRuleSession.execute(OracleRuleSession.java:224)
at oracle.bpel.services.rules.impl.DecisionServiceImpl.process(DecisionServiceImpl.java:1385)
at oracle.bpel.services.rules.impl.DecisionServiceImpl.assertExecuteWatchStateless(DecisionServiceImpl.java:546)
at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.invoke_assertExecuteWatchStateless(BookOrderDecisionSOAPBinding_Tie.java:162)
at oracle.bpel.services.rules.runtime.BookOrderDecisionSOAPBinding_Tie.processingHook(BookOrderDecisionSOAPBinding_Tie.java:457)
at oracle.j2ee.ws.server.StreamingHandler.handle(StreamingHandler.java:297)
at oracle.j2ee.ws.server.JAXRPCProcessor.doEndpointProcessing(JAXRPCProcessor.java:413)
at oracle.j2ee.ws.server.WebServiceProcessor.invokeEndpointImplementation(WebServiceProcessor.java:349)
at oracle.j2ee.ws.server.JAXRPCProcessor.doRequestProcessing(JAXRPCProcessor.java:277)
at oracle.j2ee.ws.server.WebServiceProcessor.processRequest(WebServiceProcessor.java:114)
at oracle.j2ee.ws.server.JAXRPCProcessor.doService(JAXRPCProcessor.java:134)
at oracle.j2ee.ws.server.WebServiceServlet.doPost(WebServiceServlet.java:177)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:221)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:122)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:111)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
08/04/10 07:52:30 pFaultMessage is org.collaxa.thirdparty.apache.wsif.base.WSIFDefaultMessage@6e0e5f name:operationErroredFault
08/04/10 07:52:30 QName string is operationErroredFault
where 'BookOrderDecision' is the name of the decision service I am using in BPEL.
I dont understand why I am getting two errors for the same BPEL Process.
Kindly help me in this problem.I am stuck with this for about a week but could not get to the solution.
Thanks in advance.
Regards,
Venkat.Hi Venkat,
Whenever you do schema changes, you need to go through the cycle of
re-importing the XML schema in the rule repository, re-create the decision
service partnerlink, re-deploy the decision service.
I suspect you have maybe imported the entire XML fact type model (with fact3 and
fact4) instead of just fact1 and fact2 (might want to check in rule author).
So even if you don't use fact3 and fact4 in decision service, they are part of the rules
datamodel.
Regards,
Ralf -
We are getting this error while adding entries to SSO database. Its working in other environments and failing in only environment. Please advice.
error MSB4018: The "BizTalk.BuildGenerator.Tasks.SSO.PopulateApplicationProperty" task fa
iled unexpectedly.\r
: error MSB4018: System.Runtime.InteropServices.COMException (0xC0002A40): The external cre
dentials in the SSO database are more recent.\r
error MSB4018: \r
error MSB4018: at Microsoft.BizTalk.SSOClient.Interop.ISSOConfigStore.SetConfigInfo(St
ring applicationName, String identifier, IPropertyBag properties)\r
error MSB4
018: at BizTalk.BuildGenerator.Tasks.SSO.SSOConfiguration.Write(String appNa
me, String propName, String propValue)\r
error MSB4018: at BizTalk.BuildGenerator.Tasks.SSO.PopulateApplicationProperty.Execute
()\r
error MSB4018: at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.IT
askExecutionHost.Execute()\r
error MSB4018: at Microsoft.Build.BackEnd.TaskBuilder.ExecuteInstantiatedTask(ITaskExe
cutionHost taskExecutionHost, TaskLoggingContext taskLoggingContext, TaskHost t
askHost, ItemBucket bucket, TaskExecutionMode howToExecuteTask, Boolean& taskRe
sult)
Thanks, Pavan MCTS-Microsoft Biztalk Windows Server 2010Hi,
This error generally arises when your system datetime is not in sync with the Domain Controller datetime. Try following steps:
1. Check if the Windows Time Service is running on your machine or not. Try restarting this service and then restart host instances. Then run your script.
2. If this does not works, have a look at this
link
Hope this will help.
HTH,
Sumit
Sumit Verma - MCTS BizTalk 2006/2010 - Please indicate "Mark as Answer" or "Mark as Helpful" if this post has answered the question
Maybe you are looking for
-
Olympus E-420 not supported?
I have an Olympus E-420 DSLR and use Photoshop CS3 10.0.1 (with Bridge) on Windows Vista Home 32-bit. I recently updated the Camera Raw to version 4.4.1 to see if that could solve the problem with opening my camera's RAW images (.orf), but that didn'
-
Button for next recording in the database
Hello, I currently testing Adobe LiveCycle to create a PDF form with data link to a database (Access). The goal of my form is for the manager of each of our site to write variable about the paycheck of each employe. So first I create my AccessDatabas
-
It may have been a Roxio program but not sure.
-
Dashcode Web Widget - RSS feed only displays in Safari
Created a simple web widget in dashcode (my first experience with it) and when I deploy to the web it only works correctly in Safari. The RSS feed does not display in Explorer or Firefox. Having trouble getting it work on a windows computer and acros
-
How to increase more memory to your Nokia 7100 Sup...
Is there any way you can increase your memory to a Nokia 7100 Supernova with a Internal Memory? Please need someone who really knows. Thanks!