Error while executing WAD: " Page cannot be displayed"

Hi All,
I am facing an error while i am executing the WAD template.As soon i execute the template it gives an error as " Page Cannot Be Displayed".
I have just used one table in my template.
Is this some setting issue??
Please give your valuable inputs.
Regards,
Kshitij Mathur-

Kshitij,
Check out the serivces are activated or not?
U can check this Tcode SICF
Select Default host->sap->bw right clik and check if its in deactive mode then activate it and save.
Hope it helps.
Urs,
Rakesh.

Similar Messages

Error while executing the Job:Cannot assign NULL to host variable 1

Hello!
I have the following issue:
Error while executing the Job:Cannot assign NULL to host variable 1. setNull() can only be used if the corresponding column is nullable. The statement is "INSERT INTO "VIRSA_... (see log for details)
Note 1362138 - Rule generation - null pointer exception virsa_cc_rtmap doesn't me. After uploading files of ZCC_DOWNLOAD_SAPOBJ and ZCC_DOWNLOAD_DESC I got the same problem during job running...
How can I find out where is the problem?

Hi
That looks like your fields are disabled but they could still be causing the problem edited ( nah - talking rubbish as you've put dummy " " in there) edited - the 'null' error caused many background jobs to fail but, once we had the evidence to show the space (somebody had pressed enter instead of delete/backspace to clear the entry) it stopped the problem - just a bit of learning on the job which we all go through for the GRC chaps in KL.
A " " would be valid but a (I know you can't see it but it's there wouldn't be )
edited.When you did an edit/replace did it say it had replaced anything please?edited
The word doc option does sound good!
Cheers
David
Edited by: David Berry on Nov 4, 2010 7:33 PM

Error while executing WAD template and publishing it to Portal

I get an error message when i try to execute WAD template and publish in portal
//start of error message
Error while loading query metadata
check the query and portal settings
RSBOL 018 Java system error:Exception in method process Function.
//end of error messagge
But when i click "ok" then the template gets executed and published in portal
I want to know why is this error message getting displayed.
BW is at SP14 level (template is created in BI 7.0)
EP is at SP13 level.
Is there any compatibility issue between BW and EP.If so, please let me know.
Please solve this issue.
Thnaks and Regards,
Pradeep

Hi,
take a look:
Note 916090 - RFC-error messages in Web Application Designer 2004s
Hope this helps...
Regards
Andreas

Error while executing WAD report

Hi Gurus,
While executing the wad report in the web getting an error, can u brief me, and provide me any step by step procedure for WAD template creation
Reference to data provider "%NM%" is invalid
In the Web Application Designer, create a data provider with the name %NM% in template ZDEMO_WAD, or change the reference to the data provider in Web item ANALYSIS_ITEM_1
DROPDOWN_ITEM_1
No reference To data provider defined
In the Web Application Designer, set parameter DATA_PROVIDER_REF in template ZDEMO_WAD for Web item DROPDOWN_ITEM_1 to a valid data provider

can u brief me, and provide me any step by step procedure for WAD template creation
I believe you have already posted a Q on Dashboards
Re: DashBords
& many have responded with documentation links that can help. I suggest you take time to go thru' the links.
Reference to data provider "%NM%" is invalid
In the Web Application Designer, create a data provider with the name %NM% in template ZDEMO_WAD, or change the reference to the data provider in Web item ANALYSIS_ITEM_1
You need to first create a Data Provider, say DP1, on either an InfoProvider/Query/QueryView to be able to bind it to any webitem in a WAD template. Once created, assign DP1 to ANALYSIS_ITEM_1 under Data Binding properties.
No reference To data provider defined
In the Web Application Designer, set parameter DATA_PROVIDER_REF in template ZDEMO_WAD for Web item DROPDOWN_ITEM_1 to a valid data provide
Create DP2 first & then have it assigned to the DROPDOWN_ITEM_1 under Data Binding properties.

Error While executing WAD Template

Hi BW Experts,
I am working on BI7.0
I am getting following error, when I am trying to execute
WAD Template through portal.
Portal Runtime Error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
Access denied (Object(s): portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bex).
Exception id: 07:01_31/07/07_0035_37431450
See the details for the exception ID in the log file
Anybody explain me about this error.
Thanks in advance.
Maruthi

Hi maruthi,
It seems that you dont have the access to the portal, try to login using another userid(or u can use admin's) and PW, also see this portal address included in default IP Addresses.(Tools->Internetoptions->Connections-> Lansettings->advanced.
Regards,
Naren.

500 Internal Server Error while executing WAD

Hi Everyone,
I am executing a WAD and following the steps as mentioned. Opening a variant dialog box (this will show the values of the variables at that point in time) -> Changing any of the variable values - Clicking OK -> Clicking Cancel button in the Variant dialog -> Clicking on any other tab -> Get a 500 Internal Server Error with the following description. There is no short dump registered in the BY system. Please help me with any possible OSS Notes that would apply to this. Also please note that instead of directly clicking the "Cancel", if i use the "Check" button first and then "Cancel", I do not get this error.
The initial exception that caused the request to fail was:
com.sap.ip.bi.bics.dataaccess.resource.impl.bi.exceptions.BicsResourceBwRuntimeException:
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderSelectionObject.initializeState(ProviderSelectionObject.java:844)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.queryview.ProviderQueryView.initializeState(ProviderQueryView.java:103)
at com.sap.ip.bi.bics.dataaccess.resource.impl.bi.selector.ProviderSelectionObject.hasDefaultView(ProviderSelectionObject.java:1350)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.selector.SelectionObject.initializeState(SelectionObject.java:439)
at com.sap.ip.bi.bics.dataaccess.consumer.impl.queryview.QueryView.initializeState(QueryView.java:194)

Hi Ravi,
maybe this is a similar problem to the one discussed
IcmHandleNetWrite(id=0/196): No data from server received (rc = -9).
Also, check ST22 and SM21 if they give some helpful information on this.

E-Recruitment error message :Page cannot be displayed

Hi E u2013Recruitment Experts,
While testing the E rec BSP pages from SE80 I am getting the error message:
Page cannot be displayed.
What I have done is as follows:
Step 1:defined the context in table V77RCF_CONTEXT
Step 2:defined the element of container sequence in table V77RCF_CS_ITEMC by copyin the data from table V77RCF_CS_ITEM
Step3. defined the container sequence in table V77RCF_CS_SEQC and defined the element.
Step 4.defined link for start pages in table V77RCF_SP_LINKC while copying the data from table V77RCF_SP_LINK
Step 5.Define Start page groups in table V77RCF_SP_GROUPC while copying the enteries from V77RCF_SP_GROUP
Step 6;Defined Start pages in table V77RCF_SP_ASIDC while copying enteries from table V77RCF_SP_ASID
Step 8:I generated the url using the program RCF_GENERATE_URLS using Https protocol
Apart from above setting I have also made entries in the following customer tables:
T77RCF_SP_ID(C) - Startpages
T77RCF_SP_ID(C)T - Startpages texttable
T77RCF_SP_GROUP(C) - Startpage groups (the blocks with a number of links)
T77RCF_SP_GROUPT/GRPCT - Startpage groups texttable
T77RCF_SP_LINK(C) - Links
T77RCF_SP_LINK(C)T - Links texttable
T77RCF_SP_ASID(C) - assignment of groups to startpages
T77RCF_SP_ASGRP(C)
But still I am getting the error message that the page cannot be displayed
Can any body tell me where I have missed out
Thanks and best regards
Rajeev chhabra

Hi Naddy,
I could not find the error log in the given T code.Is there anything else where I should look at.
Cheers
Rajeev

Proxy to File The XML page cannot be displayed

Hi My scenario is Proxy to File
no error in moni and also in comm channel.
.xml File generated sucessfully in the target. while i am trying to open it it saying that
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
Invalid at the top level of the document. Error processing resource 'file:///C:/Documents and Settings/P7106410/Desktop/Pro...
Gone through the related blogs but didnt solved.
Pls let me know what may the wrong
Vankadoath

Thanks for ur replies Abhishek salvi, SudipPaul
no errors in comm channel shows all the logs sucessfull.
If I open the this file in note pad it shows correct
its an xml file, its not able to open in xml shows the error as
The XML page cannot be displayed
Cannot view XML input using style sheet. Please correct the error and then click the Refresh button, or try again later.
the xml structure is
<?xml version="1.0" encoding="utf-8" ?>
- <n0:Logos_ProjectPhasesData_SEN_MT xmlns:n0="ness.com:Czech:ProjectPhasesData" xmlns:prx="urn:sap.com:proxy:DV3:/1SAI/TAS30B2AEEE452B4C067B89:701:2009/02/10">
- <Row>
<PROJECT_DEF>X0-0097</PROJECT_DEF>
<DESCRIPTION1>Project for 3750-111.</DESCRIPTION1>
<RESPONSIBLE_NO1>00001831</RESPONSIBLE_NO1>
<WBS_ELEMENT>01-01</WBS_ELEMENT>
<DESCRIPTION2>Project for 3750-111</DESCRIPTION2>
<RESPONSIBLE_NO2>00000123</RESPONSIBLE_NO2>
<COUNTRY>HU</COUNTRY>
</Row>
- <Row>
<PROJECT_DEF>X0-0097</PROJECT_DEF>
<DESCRIPTION1>Project for 3750-111.</DESCRIPTION1>
<RESPONSIBLE_NO1>00001831</RESPONSIBLE_NO1>
<WBS_ELEMENT>01</WBS_ELEMENT>
<DESCRIPTION2>Project for 3750-111</DESCRIPTION2>
<RESPONSIBLE_NO2>00000123</RESPONSIBLE_NO2>
<COUNTRY>HU</COUNTRY>
</Row>
</n0:Logos_ProjectPhasesData_SEN_MT>
Regards
Vankadoath

Page cannot be display

Hi,
Db 10.2.0.4
There are retek environment.From application user are trying to create allocation after some time the error is coming that “page cannot be display”. The same process some time run smoothly but sometime occur “page cannot be display”.Kindly suggest.
Thanks
Edited by: user13382934 on Aug 17, 2010 3:18 AM

Hi,
What i sent you before that was the output of tkrpof because of big file i sent some of the lines.Find below some of the execution plan of tkprof output if you need all kindly send me personal ID i will send you.
Rows Execution Plan
0 SELECT STATEMENT MODE: CHOOSE
0 NESTED LOOPS
0 NESTED LOOPS
0 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID) OF 'USER$'
(CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF 'I_USER1' (INDEX
(UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (CLUSTER) OF 'TS$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF 'I_TS#' (INDEX
(CLUSTER))
0 TABLE ACCESS MODE: ANALYZED (CLUSTER) OF 'TS$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF 'I_TS#' (INDEX
(CLUSTER))
SELECT /*+ ALL_ROWS */ COUNT(*)
FROM
ALL_POLICIES V WHERE V.OBJECT_OWNER = :B3 AND V.OBJECT_NAME = :B2 AND
(POLICY_NAME LIKE '%xdbrls%' OR POLICY_NAME LIKE '%$xd_%') AND V.FUNCTION =
:B1
call count cpu elapsed disk query current rows
Parse 0 0.00 0.00 0 0 0 0
Execute 270 0.00 0.02 0 0 0 0
Fetch 270 0.00 0.86 0 14850 0 270
total 540 0.00 0.89 0 14850 0 270
Misses in library cache during parse: 0
Optimizer mode: ALL_ROWS
Parsing user id: 37 (XDB) (recursive depth: 2)
Rows Execution Plan
0 SELECT STATEMENT MODE: HINT: ALL_ROWS
0 SORT (AGGREGATE)
0 VIEW OF 'ALL_POLICIES' (VIEW)
0 UNION-ALL
0 FILTER
0 HASH JOIN
0 FIXED TABLE (FULL) OF 'X$KSPPI' (TABLE (FIXED))
0 MERGE JOIN (CARTESIAN)
0 NESTED LOOPS (OUTER)
0 NESTED LOOPS (OUTER)
0 NESTED LOOPS (OUTER)
0 NESTED LOOPS (OUTER)
0 NESTED LOOPS
0 NESTED LOOPS
0 NESTED LOOPS
0 NESTED LOOPS
0 NESTED LOOPS
0 NESTED LOOPS
0 TABLE ACCESS MODE: ANALYZED
(BY INDEX ROWID) OF 'USER$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE
SCAN) OF 'I_USER1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED
(BY INDEX ROWID) OF 'USER$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE
SCAN) OF 'I_USER1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED
(FULL) OF 'RLS$' (TABLE)
0 TABLE ACCESS MODE: ANALYZED (BY
INDEX ROWID) OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (UNIQUE
SCAN) OF 'I_OBJ1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (BY
INDEX ROWID) OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (RANGE SCAN)
OF 'I_OBJ2' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (CLUSTER)
OF 'TAB$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN)
OF 'I_OBJ#' (INDEX (CLUSTER))
0 TABLE ACCESS MODE: ANALYZED (CLUSTER) OF
'TS$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_TS#' (INDEX (CLUSTER))
0 TABLE ACCESS MODE: ANALYZED (CLUSTER) OF
'SEG$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_FILE#_BLOCK#' (INDEX (CLUSTER))
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_OBJ1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID)
OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_OBJ1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (CLUSTER) OF 'USER$'
(CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_USER#' (INDEX (CLUSTER))
0 BUFFER (SORT)
0 FIXED TABLE (FULL) OF 'X$KSPPCV' (TABLE (FIXED))
0 NESTED LOOPS
0 INDEX MODE: ANALYZED (RANGE SCAN) OF 'I_OBJAUTH1'
(INDEX (UNIQUE))
0 FIXED TABLE (FULL) OF 'X$KZSRO' (TABLE (FIXED))
0 FIXED TABLE (FULL) OF 'X$KZSPR' (TABLE (FIXED))
0 FILTER
0 NESTED LOOPS
0 NESTED LOOPS (OUTER)
0 NESTED LOOPS
0 NESTED LOOPS
0 NESTED LOOPS
0 NESTED LOOPS
0 TABLE ACCESS MODE: ANALYZED (BY INDEX
ROWID) OF 'USER$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_USER1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (BY INDEX
ROWID) OF 'USER$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_USER1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (FULL) OF 'RLS$'
(TABLE)
0 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID)
OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_OBJ1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID) OF
'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (RANGE SCAN) OF 'I_OBJ2'
(INDEX (UNIQUE))
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_TYPED_VIEW1' (INDEX (UNIQUE))
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF 'I_VIEW1'
(INDEX (UNIQUE))
0 NESTED LOOPS
0 INDEX MODE: ANALYZED (RANGE SCAN) OF 'I_OBJAUTH1'
(INDEX (UNIQUE))
0 FIXED TABLE (FULL) OF 'X$KZSRO' (TABLE (FIXED))
0 FIXED TABLE (FULL) OF 'X$KZSPR' (TABLE (FIXED))
0 HASH JOIN
0 NESTED LOOPS
0 NESTED LOOPS
0 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID) OF
'USER$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF 'I_USER1'
(INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (FULL) OF 'RLS$'
(TABLE)
0 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID) OF
'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF 'I_OBJ1'
(INDEX (UNIQUE))
0 VIEW OF 'ALL_SYNONYMS' (VIEW)
0 SORT (UNIQUE)
0 UNION-ALL
0 FILTER
0 NESTED LOOPS
0 NESTED LOOPS
0 TABLE ACCESS MODE: ANALYZED (BY INDEX
ROWID) OF 'USER$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_USER1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (BY INDEX
ROWID) OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (RANGE SCAN) OF
'I_OBJ2' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID)
OF 'SYN$' (TABLE)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_SYN1' (INDEX (UNIQUE))
0 FILTER
0 FILTER
0 NESTED LOOPS
0 NESTED LOOPS
0 TABLE ACCESS MODE: ANALYZED (BY INDEX
ROWID) OF 'USER$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN)
OF 'I_USER1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (BY INDEX
ROWID) OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (RANGE SCAN) OF
'I_OBJ2' (INDEX (UNIQUE))
0 INDEX MODE: ANALYZED (RANGE SCAN) OF
'I_OBJAUTH1' (INDEX (UNIQUE))
0 FIXED TABLE (FULL) OF 'X$KZSRO' (TABLE (FIXED))
0 FIXED TABLE (FULL) OF 'X$KZSPR' (TABLE (FIXED))
0 NESTED LOOPS
0 HASH JOIN
0 NESTED LOOPS
0 TABLE ACCESS MODE: ANALYZED (BY INDEX
ROWID) OF 'USER$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_USER1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (BY INDEX
ROWID) OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (RANGE SCAN) OF
'I_OBJ2' (INDEX (UNIQUE))
0 VIEW OF '_ALL_SYNONYMS_TREE' (VIEW)
0 CONNECT BY (WITH FILTERING)
0 FILTER
0 COUNT
0 HASH JOIN
0 TABLE ACCESS MODE: ANALYZED (FULL)
OF 'USER$' (CLUSTER)
0 NESTED LOOPS
0 HASH JOIN
0 TABLE ACCESS MODE: ANALYZED
(FULL) OF 'SYN$' (TABLE)
0 HASH JOIN
0 TABLE ACCESS MODE: ANALYZED
(FULL) OF 'USER$' (CLUSTER)
0 TABLE ACCESS MODE: ANALYZED
(FULL) OF 'OBJ$' (TABLE)
0 TABLE ACCESS MODE: ANALYZED (BY
INDEX ROWID) OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (UNIQUE
SCAN) OF 'I_OBJ1' (INDEX (UNIQUE))
0 FILTER
0 NESTED LOOPS
0 NESTED LOOPS
0 NESTED LOOPS
0 TABLE ACCESS MODE: ANALYZED
(BY INDEX ROWID) OF 'SYN$' (TABLE)
0 INDEX MODE: ANALYZED (UNIQUE
SCAN) OF 'I_SYN1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED
(BY INDEX ROWID) OF 'USER$' (CLUSTER)
0 INDEX MODE: ANALYZED (UNIQUE
SCAN) OF 'I_USER1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (BY
INDEX ROWID) OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (RANGE
SCAN) OF 'I_OBJ2' (INDEX (UNIQUE))
0 INDEX MODE: ANALYZED (RANGE SCAN)
OF 'I_OBJAUTH1' (INDEX (UNIQUE))
0 FIXED TABLE (FULL) OF 'X$KZSRO' (TABLE
(FIXED))
0 HASH JOIN
0 CONNECT BY PUMP
0 COUNT
0 HASH JOIN
0 TABLE ACCESS MODE: ANALYZED (FULL)
OF 'USER$' (CLUSTER)
0 NESTED LOOPS
0 HASH JOIN
0 TABLE ACCESS MODE: ANALYZED
(FULL) OF 'SYN$' (TABLE)
0 HASH JOIN
0 TABLE ACCESS MODE: ANALYZED
(FULL) OF 'USER$' (CLUSTER)
0 TABLE ACCESS MODE: ANALYZED
(FULL) OF 'OBJ$' (TABLE)
0 TABLE ACCESS MODE: ANALYZED (BY
INDEX ROWID) OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (UNIQUE
SCAN) OF 'I_OBJ1' (INDEX (UNIQUE))
0 COUNT
0 HASH JOIN
0 TABLE ACCESS MODE: ANALYZED (FULL)
OF 'USER$' (CLUSTER)
0 NESTED LOOPS
0 HASH JOIN
0 TABLE ACCESS MODE: ANALYZED
(FULL) OF 'SYN$' (TABLE)
0 HASH JOIN
0 TABLE ACCESS MODE: ANALYZED
(FULL) OF 'USER$' (CLUSTER)
0 TABLE ACCESS MODE: ANALYZED
(FULL) OF 'OBJ$' (TABLE)
0 TABLE ACCESS MODE: ANALYZED (BY
INDEX ROWID) OF 'OBJ$' (TABLE)
0 INDEX MODE: ANALYZED (UNIQUE
SCAN) OF 'I_OBJ1' (INDEX (UNIQUE))
0 TABLE ACCESS MODE: ANALYZED (BY INDEX ROWID)
OF 'SYN$' (TABLE)
0 INDEX MODE: ANALYZED (UNIQUE SCAN) OF
'I_SYN1' (INDEX (UNIQUE))
SELECT COUNT(*)
FROM
ALL_USERS WHERE USER_ID = :B1
Thanks,

XML Page cannot be displayed -- whitespace is not allowed at this location

To create an online training program I am using Captivate 3
to create the videos then move the published flash file into
Contribute 3 to create the XML and HTM files. Using the same
publishing steps most videos play; however, some videos do not. I
noticed in the FTP that videos which work will display text when I
open the XML file and those that do not I receive the error message
below:
"XML page cannot be displayed"
"Cannot view XML imput using XSL style sheet."
"Whitespace is not allowed at this location. Error processing
resource"
When I click on the flash files in the FTP the videos that
play and ones that do not play both will allow me to play the
video. I need for HealthStream (the web site my videos are stored)
to connect to the FTP but receive the message "error parsing the
XML document and content cannot be launched" due to the error
reading the XML document (located above).
Please help resolve the XML issue.

Downloaded Captivate 3 demo to check it out. Nice program,
bit expensive though...
From what I saw so far the xml-export and inport feature is
used to create swf-files in different languages. Correct?
I don't see Contribute creating any xml or html when
importing the swf created by Captivate, so what do you mean exactly
by that?
Is it a feature (that I don't know yet) that you can load xml
files dynamically into the swf's for different languages? From the
help in Captivate I understand that you open your project, then
import the translated xml, publish and then you have a translated
swf. So I don't see why there is xml on your server. I only see the
swf's that function like they should. Inlighten me please and we
will search for more answers...

View layout is not displaying, ( The page cannot be displayed)

Hi guys,
we have recently installed the ECC6. In webdynpro component, the view layout is not displaying, instead it showing the error message like " the page cannot be displayed".
I came to know that, in order to display the view layout we need to activate some services .
Please let me know what are the services should activate in order to display the layout.
Regards
Srinivas

Hi Sana,
this is very absic problem in webdynpro, lots of threades are there do search..
getting error 'Page cannot be displayed' in view layout
ABAP Web Dynpro : view designer layout error !
Layout Tab Preview: This program cannot display the webpage
Cheers,
Kris.

The XML page cannot be displayed

Hi,
i have problem when i run report in modul Purchasing.
This is new report. I create use .rdf but for output, i set to XML
the error is :
The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
An invalid character was found in text content. Error processing resource 'http://oraapps.moratelindo.co.id:8000/OA_CGI/FND...
<VENDOR_NAME>CENTRADO PRIMA INT
When i click Refresh, output is "+Authentication failed+."
See screen capture above:
[http://my.jetscreenshot.com/demo/20120321-szyn-45kb.jpg]
So, what can i do about that problem.
Thanks
Edited by: adewe on Mar 21, 2012 11:13 AM

when concurrent complited then press view output
you can see html page with +...Cannot view XML input using XSL style sheet...+
see code of page and post top 10 or may be more rows for identify xml
ps: may be you use xsd or dtd
Edited by: AlexAnd on Mar 20, 2012 9:59 PM

Page cannot be displayed error when executing WAD

Hi all,
I'm getting this error (Page cannot be displayed) when i execute my WAD. What is curious is that i can execute it ok i some machines, but some others get the error.
Anyone knows what could be causing this?
I've tried in different machines, all with Win XP sp2 and IE6 browser... and remains the same: some execute the WAD ok, some don't.
I'll appreciate any help on this.
Thank you,
g.

I had the same error and was a PROXY problem....
I fix it setting in IE connetions the access to HTTP://MYSERVER/...ETC....in LAN Configuration->advanced options in IE....it works fine for me....
Regards...

Page cannot be displayed error while accessing links on DAS page

Hi,
I have installed SSO server along with DAS on a single m/c. While installing i gave OID instance hostname and password. After installation when i access the DAS homepage and click on Login or Myprofile url is is throwing Page cannot be displayed error page
i found following in the Apache\logs\error.log
[Wed Nov 23 10:28:26 2005] [error] [client 198.186.43.113] [ecid: 1132759706:198.186.43.113:2408:2136:6,0] MOD_OC4J_0376: Request initial processing failed in ac worker with HTTP status code 1. This status will be passed back to the listener for error handling.
I checked OC4J_SECURITY and HTTP_Server status. They are up and running. OID is also running.
Any solution for this problem?

Hi,
I once faced a similar problem - I am not sure if the issues are related, but here goes :
I figured out that DAS uses mod_osso to connect to the SSO Server. I hadn't configured mod_osso to correctly talk to the SSO Server. I used the ssoreg.sh script in the $ORACLE_HOME/sso/bin to make the mod_osso " talk " to the SSO Server.
After this, the DAS started working properly.
BTW, what's your AS instance version ?

Error while executing the report to display on the web in BI 7.0?

Hi All,
In BI 7.0, Getting Error while executing the report to display on the web?
The error message displayed is:
" Network Access Message : The website cannot be found ".
Source: DNS error.
Why this error is coming.
Wht needs to be done.
Thanks in Advance.

Hi Kishore,
All the configurations are in proper shape.
We need to change any IP adresses or proxy settings in the Internet explorer (Tools -> Internet options -> Connections -> LAN settings -> etc.,)
Do We need to configure any server address for getting the output to display on web pages in BI 7.0.
EP is not configured over here. Is that causing the problem.
Thansk in Advance.

Error while executing WAD: " Page cannot be displayed"

Similar Messages

Maybe you are looking for