Error while extending internal table

Hi,
We have a data load going on from one ODS to another, this is a daily load but for but last few days data load is failing saying
"Runtime Error: TSV_TNEW_PAGE_ALLOC_FAILED - You attempted to extend an internal table, but the required space was not available. "
What all measures can be taken to make this load happen regularly?
Regards,
Kironmoy Banerjee.

Hi ,
Please check below threads.
http://forumsa.sdn.sap.com/click.jspa?searchID=32822064&messageID=4660903
http://forumsa.sdn.sap.com/click.jspa?searchID=32822064&messageID=6806983
http://forumsa.sdn.sap.com/click.jspa?searchID=32822064&messageID=6794034
http://forumsa.sdn.sap.com/click.jspa?searchID=32822064&messageID=5618979
http://forumsa.sdn.sap.com/click.jspa?searchID=32822064&messageID=8059962
http://forumsa.sdn.sap.com/click.jspa?searchID=32822064&messageID=6678629
http://forumsa.sdn.sap.com/click.jspa?searchID=32822064&messageID=5989583
Hope it helps.
Thanks & Regards,
Ramnaresh.P.

Similar Messages

Error while passing internal table between methods at design time

Hi,
In a method (say method1 for eg) I have declared an internal table, IT_RANGE2 as:
DATA: IT_RANGE2 TYPE STANDARD TABLE OF ZTTRANGE
ZTTRANGE is a tabletype in SE11 and has a line type ZRANGE.
In this method, I am calling another method (method2)
WD_COMP_CONTROLLER->HOLD_DATA( CHANGING IT_RANGE = IT_RANGE2 ).
IT_RANGE has been declared as;
PARAMETER TYPE REFTO ASSOCIATED TYPE
IT_RANGE CHANGING ZTTRANGE.
I am getting an error: IT_RANGE2 is not type-compatible with formal parameter IT_RANGE.
Please help.
MIck

change it_range2 like this
DATA: IT_RANGE2 TYPE ZTTRANGE

Error while dropping a table

Hi All,
i got an error while dropping a table which is
ORA-00600: internal error code, arguments: [kghstack_free1], [kntgmvm: collst], [], [], [], [], [], [], [], [], [], []
i know learnt that -600 error is related to dba. now how to proceed.
thanks and regards,
sri ram.

00600 errors should be raised as service request with Oracle as it implies some internal bug.
You can search oracle support first to see if anyone has had the same class of 00600 error, and then if not (and therefore no patch) raise your issue with Oracle.
http://support.oracle.com

3-1674105521 Multiple Paths error while using Bridge Table

https://support.us.oracle.com/oip/faces/secure/srm/srview/SRViewStandalone.jspx?sr=3-1674105521
Customer Smiths Medical International Limited
Description: Multiple Paths error while using Bridge Table
1. I have a urgent customer encounterd a design issue and customer was trying to add 3 logical joins between SDI_GPOUP_MEMBERSHIP and these 3 tables (FACT_HOSPITAL_FINANCE_DTLS, FACT_HOSPITAL_BEDS_UTILZN and FACT_HOSPITAL_ATRIBUTES)
2. They found found out by adding these 3 joins, they ended with circular error.
[nQSError: 15001] Could not load navigation space for subject area GXODS.
[nQSError: 15009] Multiple paths exist to table DIM_SDI_CUSTOMER_DEMOGRAPHICS. Circular logical schemas are not supported.
In response to this circular error, the developer was able to bypass the error using aliases, but this is not desired by client.
3. They want to know how to avoid this error totally without using alias table and suggest a way to resolve the circular join(Multiple Path) error.
Appreciated if someone can give some pointer or suggestion as the customer is in stiff deadline.
Thanks
Teik

The strange thing compared to your output is that I get an error when I have table prefix in the query block:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "SYSADM"."TMP3" failed to load/unload and is being skipped due to error:
ORA-38500: Unsupported operation: Oracle XML DB not present
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at Fri Dec 13 10:39:11 2013 elapsed 0 00:00:03
And if I remove it, it works:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "SYSADM"."TMP3" 5.406 KB 1 out of 2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at Fri Dec 13 10:36:50 2013 elapsed 0 00:00:01
Nicolas.
PS: as you can see, I'm on 11.2.0.4, I do not have 11.2.0.1 that you seem to use.

Error while detrmining Internal Document Number for Excise Invoice.

Hello mate, I am trying to create excise invoice for for factory sale. while saving the document I am getting an error" Error
while detrmining Internal Document Number for Excise Invoice. Message: Maintain Number Range for J_1IINTNUM". I have already maintained number range for mentioned object "J_1INTNUM" in TCODE SNUM , still getting error. Please solve my querry . Is it related to transport or number range activation or something else? I have maintained number range with serial no. "01"

Hello ,
Ensure that number ranges are properly maintained in the respective client that should be the year specific.Some times even u maintained the system should not consider that number ranges due to table updation problem ,because i had faced the same in the earlier and received the reply from the sap stating that this error was occured rarely after the years,so please ignore that ,for your problem u first come out of the screen and then re log in and then create the excise invoice ,then check the number ranges .
Please revert for any
Kalyan

Error while loading AS400 table

Posted: 14 May 2014 08:11
Post subject: Error while loading AS400 table
Hi,
I was trying to load an AS400 table using a flat file as source. The table and flat file has a single field only. I'm getting the error "<SQLExecute>: <[IBM][System i Access ODBC Driver]Error in assignment.>"
The screenshot of the full error message is attached. can someone please help me to resolve this.
Thanks,
david

Posted: 14 May 2014 08:11
Post subject: Error while loading AS400 table
Hi,
I was trying to load an AS400 table using a flat file as source. The table and flat file has a single field only. I'm getting the error "<SQLExecute>: <[IBM][System i Access ODBC Driver]Error in assignment.>"
The screenshot of the full error message is attached. can someone please help me to resolve this.
Thanks,
david

Full Load: Error while executing :TRUNCATE TABLE: S_ETL_PARAM

Hi All,
We are using Bi Apps 7.9.6.1. Full Load was running fine. But Now we are facing a problem with truncating a table "S_ETL_PARAM".
I have restart informatica Server And also DAC Srever. But still I am getting the same in the DAC Log as, *"NOMALY INFO::: Error while executing : TRUNCATE TABLE:S_ETL_PARAM*
*MESSAGE:::com.siebel.etl.database.IllegalSQLQueryException: DBConnection_OLTP:SIEBTRUN ('siebel.S_ETL_PARAM')*
*Values :*
*Null Map*
*EXCEPTION CLASS::: java.lang.Exception"*
Any Suggestion.....
Thanks in Advance,
Deepak

are you trying to run incremental load when you get this truncate error? can you re-run full load and see that still runs ok? pls also check your DW side database logs like alert lor any DB level issue. such errors do not throw friendly messages in DAC/Informatica side.

Error while filling setup tables for 2lis_13_vahdr

Dear friends,
I am getting below Error while filling setup tables for 2lis_13_vahdr.
More faulty documents found than the tolerated 0000000000
Message no. M2222
Can any one guide me how to address this issue.
Thanks and Regards
Nithya

Hello Nithya,
It seems the No of tolerated faulty documents that you have given is 0. So when you initialize try to these.
While executing OLI*BW including a value in the maintain "No. tolerated faulty documents" - 5000 or 10000.
Then execute the program in background.
Once the job is completed check the background job log if any errors.
Thanks
Chandran

Error while filling setup table for Sales

Dear Team,
We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
application component 11
Error determining rate: foreign curr. local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
Message No M2810
application component 13
Billing document 480050000: error determining stats. currency rate (no updating)
More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
If anybody faced this problem kindly reply to this.
Best Regards,
SG

Hi There,
Might be your using a wrong document number.
I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
If you use vice versa that error will throw.
Regards,
MQ

Timeout error while filling setup tables

HI all
I am getting timeout error while filling setup tables(OLI1BW).I clicked on execute button on hte screen.Its not scheduled as a background job.
Going through threads i have come to know that to solve this issue
1.BASIS team have to increase backgroung processses or memory
2.run it as a background job.
When I went to Program->Executein the backgroundPrint background parameters window has popped up.
What to do in there?I am afraid if I include parameters like printer name....what is it and how long is it going to print?
Please let me know.
Thanks,
Harika.

thanks for the reply.
it was set to LOCL only.
But i have 3 options in the dropdown windowsprinter :Send to onenote2007
Microsoft XPS document writer
OUrprinteraddress
WHich one to choose here?
Edited by: harikag on Aug 10, 2011 8:47 AM

Getting CFGFWK-64060 error while extending a domain for ECM..

Hi,
I am getting this error while extending a weblogic domain for Oracle ECM.
CFGFWK-64060 the template you selected can't be applied because the following dependencies can not be satisfied.
Missing prerequisites:
DEP for Oracle UCM Core Template:11.1.1.0[C:\Oracle\Middleware\Oracle_ECM1\common\teplates\applications\oracle.core_template_11.1.1.jar] (Oracle Enterprise manager)
Thanks in advance

Hi,
I am getting this error while extending a weblogic domain for Oracle ECM.
CFGFWK-64060 the template you selected can't be applied because the following dependencies can not be satisfied.
Missing prerequisites:
DEP for Oracle UCM Core Template:11.1.1.0[C:\Oracle\Middleware\Oracle_ECM1\common\teplates\applications\oracle.core_template_11.1.1.jar] (Oracle Enterprise manager)
Thanks in advance

Out of Disk Space Error while Generating Pivot Table

Hi!
I encountered the following error while Generating Pivot Table -
View pivotTableView!1 returned the following message:
Odbc driver returned an error (SQLExtendedFetch).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC
Location: saw.odbc.statement.fetch,
saw.cube.engine.execute.dataTraversal, saw.cube.engine.execute,
saw.cube.cache.processCube, saw.views.pivottable.displayer,
saw.subsystem.portal, saw.httpserver.request,
saw.rpc.server.responder, saw.rpc.server,
saw.rpc.server.socketServer, saw.threadPool, saw.threadPool,
saw.threads
File: ./project/webodbcaccess/odbcresultsetimpl.cpp, Line: 182
State: S1000. Code: 10058. [NQODBC] [SQL_STATE: S1000] [nQSError:
10058] A general error has occurred. Out of disk space. (S1000)

user11204020, what's your question?? :)
You're getting an out of disk space error ... which means you've run out of disk space, no?
Since it's saw related I'm guessing you'll need to make more space available to your OracleBIdata/tmp directory

DAC: "error while reading repository table". Please help!

Hi everybody,
I copied DAC directory from server to a workstation.
DAC client on server machine runs normally.
When trying to run DAC client on the workstation, I get an error message "Error while reading repository table".
I tried to find any DAC log file to get some additional information, but I couldn't.
The connection in DAC seems to be configured properly (test connection successful).
The only difference I found between server and workstation is that there are two Oracle homes installed on the workstation and one - on the server.
Thanks,
Alex

So you can read the tables now? Good to know.
Just as a hint: if you "tnsping" your data source from a command window, you'll see which path and file is used, so you can find out which home.
TNS Ping Utility for 32-bit Windows: Version 11.1.0.6.0 - Production on 04-MAR-2009 16:42:43
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
C:\Oracle\product\11.1.0\client_1\network\admin\sqlnet.ora <--- my 11g home is used and not the 9i or 10g which also reside on this machine.
@DAC client can't connect to server: i.e. the icon stays red?
- Is your server up and running? (I don't want to start a flame war, but it happens to the best of us)
- Did you go through the steps here? http://download.oracle.com/docs/cd/E12513_01/doc/bic.101/e12653/dac_configure.htm
Cheers,
C.

DAC: error while reading repository table

Hi everybody,
I installed DAC (copied from server to a workstation).
When trying to run DAC client on the workstation, I get an error message "Error while reading repository table"
The connection seems to be configured properly (test connection successful).
DAC client on server machine starts normally.
What can be a problem?
Thanks,
Alex

Hello again!
Has anybody seen this problem?
What can it be?
Where can I find DAC logs?
Cheers,
Alex

Short Dump to extending internal table memory

Hi All,
I have an internal table with 10 million records . While appending records to this internal table iam getting dump as "No storage space available for extending the internal table." .I declared internal table with "OCCURS 0 "How can i avoid this dump ?

Hi,
The problem seems to be related to overflow of the internal table allocation size which will be set by BASIS people. Like if the internal table size restricted to say 1024KB and if we are trying to push data more than this it will throw such error.
Please try to split them into more smaller but several internal tables. Also try to restrict the number of records selected, if they are not really required to be selected.
Regards,
Ferry Lianto

Error while extending internal table

Similar Messages

Maybe you are looking for