Error While Extracting Data in ODS

can anyone help me out i have created an ODS ZMM_OD81 but i got the following error messaged while extracting the data, pl. help me asap.
1. SIDs determined successfully for request REQU_3YGDERK275SLEUNKLGWOR30GZ from ODS object ZMM_OD81
2. Request REQU_3YGDERK275SLEUNKLGWOR30GZ , data package 000001 incorrect with status 9
3. Request REQU_3YGDERK275SLEUNKLGWOR30GZ , data package 000001 not correct
4. Inserted records 1- ; Changed records 1- ; Deleted records 1-
5. No confirmation for request ODSR_3YGHO1DSYIDFO0B7E8ZO2Q8MB when activating the ODS object ZMM_OD81
6. Communication error (RFC call) occurred
7. Activation of data records from ODS object ZMM_OD81 terminated.
thanx
abhishek suppal

Hi Abhishek,
I guess the error occured while activating the request and not while loading it. You can confirm this by checking in the details tab of the monitor for that request.
Try following the below steps. They might solve your problem.
1> Go to manage view of the ODS and force the QM status of the request to 'GREEN'.
2> Try activating the request manually.
Regards,
Sree

Similar Messages

  • Error while extracting data from ODS using Infospokes - URGENT

    Hi all,
    I am extracting data from an ODS using infospokes and nothing fancy, no selection criteria but I am getting an error message saying
    Syntax error in row3(-> long text) Msg id = "RG" and msgno is 102
    Any ideas on how I can see what is the exact error and how to debug this?
    thanks
    Sabrina.

    Hi Sabrina
    service.sap.com can help you getting the details of your mesg.
    I found one OSS note suitable to your mesg. So just check out OSS note # 671097. I hope this note will be some help to you. If not go and chk in the OSS you can find some more.
    Here is the note details also
    <i>Symptom
    Error message RG102: 'Syntax error in &1, row &2 (-> long text)' appears in the request log of an InfoSpoke.
    Reason and Prerequisites
    The data source is an ODS object and the extraction mode is 'delta'. The cause of the error message is that the ODS extractor is unable to select the request ID (InfoObject 0REQUID) from the change log of the ODS object. However, the request ID is mistakenly provided in the field list of the ODS object on the InfoSpoke maintenance screen. --
    Solution
    Delete the 0REQUID InfoObject from the field list of the InfoSpoke and activate the InfoSpoke. As of the patch mentioned below, the request ID in the template tab is no longer provided.
    BW 3.0B
               Import Support Package 16 for 3.0B (BW3.0B Patch 17 or SAPKW30B16) into your BW system. The Support Package will be available once note 571699 with the short text "SAPBWNews BW 3.0B Support Package 16", which describes this Support Package in more detail, has been released for customers.
    BW 3.1 Content
               Import Support Package 10 for 3.1 Content (BW3.10 Patch 11 or SAPKW31010) into your BW system. The Support Package will be available once note 571747 with the short text "SAPBWNews BW 3.1 Content Support Package 10" has been released for customers.
    To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, however, the short text still contains the words "preliminary version".
    Refer to note 110934, which contains information about BW Support Packages.</i>
    Regards,
    Rohini

  • Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7

    Hi Gurs,
    I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
    The error is:
    Update mode "Full Upload" is not supported by the extraction API
    Message no. R3011
    Diagnosis
    The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
    System Response
    The data extraction is terminated.
    Procedure
    Check for relevant OSS Notes, or send a problem message of your own.
    Your help in this regd. would be highly appreciated.
    Thanks,
    David.

    Hi David,
    I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
    Try to switch you DTPs/Infopackages to Delta mode.
    While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
    BR
    m./

  • Error While extracting data from FIAA and FIAP

    Hi Gurus,
    I am facing error while extracting data from R/3 Source. 0FIAA, 0FIAP datasources. I am getting the same error repeatedly. No data will come BW. When I checked in RSA3 I can extract records.
    Ther Error is as follows:
    Request still running
    Diagnosis
    No errors could be found. The current process has probably not finished yet.
    System response
    The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
    and/or
    the maximum wait time for this request has not yet run out
    and/or
    the batch job in the source system has not yet ended.
    Current status
    No Idocs arrived from the source system.
    Kindly help. Your points are assured.
    Thanks and Regards
    Prasad

    Hello Prasad,
    Have you already checked what happened in the source system ?
    You should verify if a job is running in sm37, or if there is no dump runtime errors due to the extraction in st22.
    It could be a clue of what happened in R/3.
    Let us know,
    Regards,
    Mickael

  • Error while loading data to ODS

    Hello BW folks ,
    I am getting an error while loading data to ODS from R/3 data source.
    The error message is " Error in PSA".
    We have deleted yesterday data from PSA for the related infosource/data source successfully .
    Since then this error is occuring. Previously data upload was successful.
    In Detail tab of monitor we are getting error message in Request option ( red Mark )
    and the same request is not going to R/3 .
    <b>The related Job itself is not present in R/3 .</b>
    This looks very strange and new to me .
    Could anyone help me in rectifying this issue ?
    Thanks in Advance.
    Best Regards ,
    Amol.

    Hello All,
    Thanks for reply.
    I tried to replicate the data source once again and activate the transfer rules in BW Production by running program in SE38 =  RS_TRANS*  activate all tranfer sturctures , then I got an error message that one infoobject is added to transfer rules in BW Production .
    But interestingly the same Transfer rules do not have this infoobject in BW Development server . So I create once again a request for Transfer rules in Dev and transported it to BW production.
    and This solved the problem
    The error message in Monitor was " Error in PSA " and then request itself was not going to R/3 . But the real issue was with Transfer rules. So after rectifying it we have solved the problem of data upload.
    Best Regards ,
    Amol Kulkarni.

  • Time Stamp Error while extracting data from R/3

    Hi,
        We are getting time stamp error while extracting data from R/3.
    To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
    Please suggest me to solve.
    Thanks
    Subba Rao

    Hi,
    Time stamp error arises when the time stamp of the data source in source  system and target system are different.
    For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
    You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
    Here are some useful links.
    [R3 016 Time stamp error where is it in BI?;
    [time stamp error in bi7;
    [Timestamp error in BI7;
    Thanks,
    Venu

  • Error while loading data to ODS in BI7

    Getting such following errors when loading data to ODS through DTP(Data Transfer Process) in BI7.     
    Runtime error while executing rule -> see long text RSTRAN     
    Record filtered because records with the same key contain errors     RSM2
    and many so on...
    source system is ok no problem with the connection part.
    plz help.

    Hi Anup.
    Probably your records are not Unique, while you have told the system they should be.
    Try to move a discrimination characteristic from data fileds to key fileds.
    Or
    Try to set the "duplicate reords allowed" setting in your datasource (tab "General Settings" Delivery of Duplicate Data Recs. = Allowed)
    Udo

  • Error while extracting data from a remote system

    Hi,
    I am facing problem while extracting data from a remote system. The connection is alright I can extract the table required from the remote system,but when I deploy it I get this error
    ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_UBN_15_LOCATION1
    ORA-00604: error occurred at recursive SQL level 1
    ORA-28000: the account is locked
    ORA-02063: preceding line from UBNDW@ORACLE_UBN_15_LOCATION1
    here Scott.demo1 is the table and UBNDW is the sid of the remote system and ORACLE_UBN_15_LOCATION1 is the location. Please help me out with this
    Thanks

    Hi,
    IDOC's need to be processed manually either in OLTp or in BW depending on the failure. Error msg in monitor status will take u to either BW or OLTP whernever there is a prob. Process IDOC's , this will start the left over packets and will finish the load.
    we hav to check IDOC in WE05(t-code) and know the status these are WE51,WE52,WE53 AND GOTO WE19 there we hav to execute the exist Idoc will succesfully loaded Idoc
    Goto St22 see the short dump error msg..
    post if there any inf..
    Thanks,
    Shreya

  • Error while extracting data from Generic datasource

    Hello Gurus,
    I have encountered an error "Errors in source system" with status red while extracting data from generic datasource into DSO.
    I have done below things:-
    1. Checked the jobs in source system, the job is successfully completed
    2. The generic datasource is active and supporting delta with calender day  in source system.
    3. No TRfc error and no idocs stucked.
    4. No short dumps in source system.
    5. The delta queue(RSA7) is showing 0 with status as green.
    6. Replicated the datasource On BW side and also activated the transfer rules by RS_TRANSU_ACTIVATE_ALL
    The problem has not yet solved. Could you guys please suggest me what might be the reason for this error......
    Thanks,
    Sonu

    Hello,
    I have used the generic delta using calender day.
    Safety upper limit : - 1
    Safety lowerr limit : - 0
    I have made the entries in va01 transaction, but the delta queus is not getting updated which should show 1.
    Do Generic extraction require any job to transfer data from Database table to delta queue.
    We are not able to get the delta records on BW side. Please suggest.
    Please suggest.
    Thanks,
    Sonu

  • Runtime Error while extracting data by datasource based on function module

    Hi all,
    I am facing an issue while extracting data from a customised data source based on a new function module.
    The datasource is extracting data successfully for only 15000 records but after that the runtime error is displayed.
    I am not able to extract whole data from R/3 system.
    Please take a look into the details and tell me what should I have to do.
    Details of Issue:
    Runtime Error : GETWA_NOT_ASSIGNED
    What happened?                                                                               
    Error in the ABAP Application Program                                                        
    The current ABAP program "SAPLZ_99Z_BW_SD_PRICING"had to be terminated because  it has  come across a statement that unfortunately cannot be executed.
    Error analysis                                                                               
    You attempted to access an unassigned field symbol                                          
        (data segment 32790).                                                                               
    This error may occur if                                                                   
        - You address a typed field symbol before it has been set with                               
          ASSIGN                                                                               
    - You address a field symbol that pointed to the line of an                              
          internal table that was deleted                                                          
        - You address a field symbol that was previously reset using                           
          UNASSIGN or that pointed to a local field that no                                        
          longer exists                                                                               
    - You address a global function interface, although the                                      
      respective function module is not active - that is, is                                  
          not in the list of active calls. The list of active calls                                 
          can be taken from this short dump. 
    Edited by: anshu13 on Apr 27, 2010 10:28 AM

    The code is displayed here:
    error is in line no. 625
    Source Code Extract                                                                               
    Line SourceCde                                         
      595            <fs_fldval> = l_fieldval.
      596            APPEND <fs_dyntable> TO <it_dyntable>.                               
      597            CLEAR :l_fieldval, wa_fldcat.                                                  
      598            CLEAR l_totlength.                                                             
      599            CLEAR <fs_dyntable>.                                                        
      600         ENDIF.                                                                           
      601        ENDIF.                                                                               
    602        MOVE-CORRESPONDING <dd03l_fields> TO wa_dd03l.                                    
      603        IF <dd03l_fields>-datatype EQ 'DATS'.                                             
      604          l_fieldval = 'X'.                                                                
      605       ELSE.                                                                               
    606        SHIFT <dd03l_fields>-intlen LEFT DELETING LEADING '0'.                         
      607          IF l_totlength IS INITIAL.                                                       
      608            SHIFT l_totlength LEFT DELETING LEADING '0'.                                   
      609            l_totlength = '0'.                                                            
      610          ENDIF.                                                                           
      611          l_currlength = <dd03l_fields>-intlen.                                            
      612          CONCATENATE l_totlength '('  l_currlength ') ' INTO l_fieldval .                 
      613          l_totlength = l_totlength + l_currlength.                                        
      614        ENDIF.                                                                               
    615*** Consider both field name and domian name for checking in range list:                   
      616        IF <dd03l_fields>-fieldname IN s_fieldlist.                                        
      617          wa_fldcat-fieldname = <dd03l_fields>-fieldname.                                  
      618        ELSEIF <dd03l_fields>-domname IN s_fieldlist.                                      
      619          wa_fldcat-fieldname = <dd03l_fields>-domname.                                    
      620        ELSE.                                                                               
    621          wa_fldcat-fieldname = <dd03l_fields>-fieldname.                                  
      622        ENDIF.                                                                               
    623        ASSIGN COMPONENT wa_fldcat-fieldname                                               
      624             OF STRUCTURE <fs_dyntable> TO <fs_fldval>.                                    
    >>>>|        <fsfldval> = l_fieldval._                                                             
      626        CLEAR l_fieldval.                                                                  
      627        CLEAR l_currlength.                                                                
      628      ELSE.                                                                               
    629        IF <dd03l_fields>-datatype EQ 'DATS'.                                              
      630          l_fieldval = 'X'.                                                                
      631       ELSE.                                                                               
    632          SHIFT <dd03l_fields>-intlen LEFT DELETING LEADING '0'.                           
      633          IF l_totlength IS INITIAL.                                                       
      634            SHIFT l_totlength LEFT DELETING LEADING '0'.                                   
      635           l_totlength = '0'.                                                              
      636          ENDIF.                                                                           
      637          l_currlength = <dd03l_fields>-intlen.                                            
      638          CONCATENATE l_totlength '('  l_currlength ') ' INTO l_fieldval .                 
      639         l_totlength = l_totlength + l_currlength.                                         
      640        ENDIF.                                                                               
    641*** Consider both field name and domian name for checking in range list:                   
      642        IF <dd03l_fields>-fieldname IN s_fieldlist.                                        
    643        wa_fldcat-fieldname = <dd03l_fields>-fieldname.                                   
      644       ELSEIF <dd03l_fields>-domname IN s_fieldlist.         
    Edited by: anshu13 on Apr 27, 2010 11:33 AM

  • Error While Extracting data

    Hi All.
    The below is the error, which I am getting while extracting data.
    Please let me know the reason, and how to overcome the below error.
    Status Log
    Warning ORA-02049: timeout: distributed transaction waiting for lock
    Error ORA-01555: snapshot too old: rollback segment number 19 with name "_SYSSMU19$" too small
    ORA-02063: preceding line from RPMSP@RPMSP_LOCATION
    ORA-06512: at "SAI_USER.SA_PROD_SUMM_DYF_MAP", line 11
    ORA-06512: at "SAI_USER.SA_PROD_SUMM_DYF_MAP", line 1622
    ORA-06512: at "SAI_USER.SA_PROD_SUMM_DYF_MAP", line 2228
    ORA-06512: at "SAI_USER.SA_PROD_SUMM_DYF_MAP", line 6253
    ORA-06512: at line 1
    Regards,

    Hi,
    Even though you have deleted the data from Datatarget, but you have not yet deleted the delta initialization inforamtion at infopackage, before re starting the delta process. So delete the information from BW system , by double click infopackage--> Schedular(menu option) --> 'Initialization option for sourcesystem' --> delete the record.
    With rgds,
    Anil Kumar Sharma .P

  • Error  While  Deleting Data  From ODS

    Hi all,
    We are getting short dump while deleting data from a perticular ODS.
    Part of short dump is--
    trigger Location of Runtime Error
       Program                                 SAPLRSAC
       Include                                 LRSACU75
       Row                                     535
       Module type                             (FUNCTION)
       Module Name                             RSAR_TRANSTRUCTURE_ACTIVATE
    help is desperately required
    Regards
    Srini--

    try to activate InfoSource and later delete data.
    Check if all ODS related objects are consistent and active.
    also pls attached the whole dump for more clarity if this does not work.

  • Error while uploading data from ODS to Cube

    Hi All,
    Will you please help out this issue.As this is a priority high issue,please reply if you know the answers.
    I am facing an error while loading the data from ODS to CUBE,the error
    is
    <b>1.Name is not in the namespace for generated BW Metaobjects
    2.Error 18 in the update</b>
    And this error is occuring only in quality server.
    Thanks,
    Ram.

    HI RAM SIVA,
    make sure that the Data source is replicated and tranfer rules r active.
    And also check whether the all transport requests r imported properly.
    hope it helps
    bhaskar

  • Error while extracting data from essbase

    Hi All,
    Now I'm tring to extract data from essbase by ODI, and at the sametime, I need to do some transformations, such as join with other relational tables or flat files to get more information about metadata. But unfortunately, once I add join into the interface, an error occurs. And it works fine if I extract directly (with no joins).
    Is there any other way except using staging table? Our data vloume is large, using staging table will waste lots of storages.
    The messages as below.
    2011-07-12 23:34:00,931 INFO [DwgCmdExecutionThread:null:49]: ODI Hyperion Essbase Adapter Version 9.3.1.1
    2011-07-12 23:34:00,931 INFO [DwgCmdExecutionThread:null:49]: Connecting to Essbase application [CORPPROD] on [172.18.93.150]:[1423] using username [admin].
    2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Successfully connected to the Essbase application.
    2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase data extract LKM option EXTRACTION_QUERY_FILE = D:\ODI_ESS_QUERIES\QUERY.TXT
    2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase data extract LKM option EXTRACTION_QUERY_TYPE = ReportScript
    2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option PRE_CALCULATION_SCRIPT = null
    2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase data extract LKM option EXT_COL_DELIMITER =      
    2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option PRE_EXTRACT_MAXL =
    2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option POST_EXTRACT_MAXL =
    2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option ABORT_ON_PRE_MAXL_ERROR = true
    2011-07-12 23:34:00,962 DEBUG [DwgCmdExecutionThread:null:49]: inside getAppData()
    2011-07-12 23:34:00,962 DEBUG [DwgCmdExecutionThread:null:49]: Got Source Metadata
    2011-07-12 23:34:01,119 ERROR [DwgCmdExecutionThread:null:49]: The number of columns returned by script [13] is less than the source data columns exposed [14]
    com.hyperion.odi.essbase.ODIEssbaseException: The number of columns returned by script [13] is less than the source data columns exposed [14]
         at com.hyperion.odi.essbase.wrapper.EssbaseReportDataIterator.validateColumns(Unknown Source)
         at com.hyperion.odi.essbase.wrapper.EssbaseReportDataIterator.init(Unknown Source)
         at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
         at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
         at sun.reflect.GeneratedMethodAccessor769.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
         at org.python.core.PyMethod.__call__(PyMethod.java)
         at org.python.core.PyObject.__call__(PyObject.java)
         at org.python.core.PyInstance.invoke(PyInstance.java)
         at org.python.pycode._pyx85.f$0(<string>:1)
         at org.python.pycode._pyx85.call_function(<string>)
         at org.python.core.PyTableCode.call(PyTableCode.java)
         at org.python.core.PyCode.call(PyCode.java)
         at org.python.core.Py.runCode(Py.java)
         at org.python.core.Py.exec(Py.java)
         at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
         at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
         at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
         at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
         at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
         at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
         at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
         at com.sunopsis.dwg.cmd.e.k(e.java)
         at com.sunopsis.dwg.cmd.g.A(g.java)
         at com.sunopsis.dwg.cmd.e.run(e.java)
         at java.lang.Thread.run(Unknown Source)
    2011-07-12 23:34:01,119 INFO [DwgCmdExecutionThread:null:49]: Logging out and disconnecting from the essbase application.
    From the working steps, I found a redundant column (Entity) was added while creating work table. Is it the reason?
    create table HYP.C$_0CUX_ABC_HYP_INTERFACE
         C14_HSP_RATES      VARCHAR2(80) NULL,
         C3_ACCOUNT      VARCHAR2(80) NULL,
         C10_PERIOD      VARCHAR2(80) NULL,
         C7_SCENARIO      VARCHAR2(80) NULL,
         C9_CURRENCY      VARCHAR2(80) NULL,
         C15_YEAR      VARCHAR2(80) NULL,
         C6_DATATYPE      VARCHAR2(80) NULL,
         C2_VERSION      VARCHAR2(80) NULL,
         C1_CATEGORY      VARCHAR2(80) NULL,
         C12_ENTITY      VARCHAR2(80) NULL,
         C13_ENTITY      VARCHAR2(80) NULL,
         C11_DEPARTMENT      VARCHAR2(80) NULL,
         C8_PROJECT      VARCHAR2(80) NULL,
         C5_DATA      NUMBER(18,8) NULL
    Appriciated!

    Extract the essbase data to a staging area and then do the transformations in another interface.
    The adaptor needs to extract the data first.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Error while loading data into ODS

    Hi we have BI for NW04S and CRM4.0. While loading data for a CRM ODS , I have received a error message which I never seen before. Yesterdaya data load was smooth and I only see issue while loading data today
    The error message in the monitor is as follows
    "Port 'A000000003' does not exists in the table of Port Description' ( message ID E0, NO 31 ).
    have anybody encountered this.
    Thanks
    Arun

    Thanks Marc,
      we found the table EDIPOA and found that the port that is missing. It seems that the enytry( row)  for our CRM system is missing which has this port as a field in this table.
      Not sure whether to manually populate it or it's part of the source system repair etc.
      please let me know
      Thanks
    Arunava

Maybe you are looking for