Error while extracting data using function module

Hello,
I created one generic datasource and i want to extract data with the option "Extraction by Function Module".
But when i specified function module name and was trying to save, it thrown a error message saying
'The specified table does not exist'.
What could be the reason?
Please help me out.
Thanks,
Regards,
Steve

Hi Steve,
Once you execute T.Code RSO2, you need to fill in the details and click Create, specify the Appl. Component and in Extraction by Function Module, give Function Module name and Extrct Structure in the given boxes.
"This structure is used by a DataSource that was created using the transaction RSO2 (generic extraction) and selects data using a function module.
The data must be transferred from this function module to an interface table E_T_DATA."
I'll try to comeup with small piece of code to sort your issue.
Hope it helps!!!!
Amit

Similar Messages

Error while reading data using Function Module /sapapo/msdp_data_read

In my report, function module /sapapo/msdp_data_read is called to get the data from a planning area.
The problem is that, the values returned by this FM are not correct.means its returning wrong Key_figure values.
On checking it was observed that , in the import parameter is_read_options ,
the field flg_aggregate = 'X'.
In Debug mode i cleared this field and called the FM and it returned the correct values.
Can anybody plz tell me what is the relevance of this field flg_aggregate .
Kindly guide.
Thnk you in advance.
Regards ,
Pranali

Dear Pranali,
FLG_AGGREGATE has following importance:
if FLG_AGGREGATE = 'X' and the table ct_cols is empty then key figures for the time period defined through IS_PERIOD will be red aggrerated.
I hope this helps.
Regards,
Tibor

Error in extracting data through function module

Hi All
         Need ur help .I am extracting data from crm thru function module.I have copied RSAX_BIW_GET_DATA_SIMPLE and modified it by using code.I am getting an error while testing extraction
Structure I have created ztest_01
Data Source :zmgc_ds1.
There 3 crm tables from where data is picked crmd_orderadm_h,crmd_customer_h,crmd_order_index.
I am attaching the code,can any body help me in correctring the error.Tell me if tthe placing of the code in the template is correct.please give details.
Error which I got:
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_DYN_CALL_ILLEGAL_FUNC', was
not caught in
procedure "RSA3_GET_DATA_SIMPLE" "(FUNCTION)", nor was it propagated by a
RAISING clause.
Since the caller of the procedure could not have anticipated that the
exception would occur, the current program is terminated.
The reason for the exception is:
The program "SAPLRSA3" contains the CALL FUNCTION statement.
The name of the function module to be called is "ZRSAX_BIW_GET_DATA_SIMPLE_01"
but "ZRSAX_BIW_GET_DATA_SIMPLE_01" cannot be found in its function group.
Possible reasons:
a) The function module "ZRSAX_BIW_GET_DATA_SIMPLE_01" has not been activated.
Therefore,
    it cannot be found at runtime.
b) The Function Library contains an incorrect entry for
"ZRSAX_BIW_GET_DATA_SIMPLE_01".
c) The function module contains no code, even FUNCTION ... ENDFUNCTION
    is missing.
You help would be appreciated.
Don't worry about points,.

Did you create your function module without problems...assigned the Z* function group? activate the function module? i assume that you copy the function module code and the variables definition on TOP include of RSAX_BIW_GET_DATA_SIMPLE
Regards
Message was edited by:
        Oscar Díaz

Error while Extracting data using RSCRM_BAPI

Friends
We are on 3.5 system upgraded recently. I am getting the following Error message while trying to extract data from a query to a table using the transaction RSCRM_BAPI. The Error message says ' Internal Error in Method CHECK_TABLE_NAME(RSCRMBW_EX_NAMESPACE_GET).
This was working fine prior to upgrade. I scoured all the OSS notes, could not find an appropriate one to solve the issue.
Have you had this problem and any thoughts on resolution ? Appreciate your inputs very much.
Regards
Mathur Sreedhar

Hi Mathur,
did you ever resolved this Issue? if so can yoou share with me the solution. i am having the same problem, we are in 3.0 . it works fine in Development and Test. but when i try it in Production . i get this error.
'Internal error in method CHECK_TABLE_NAME (RSCRMBW_EX_NAMESPACE_GET)..
if you know the answer. would please share with me.
your help would be greatly appreciated.
Thanks.
Sreeni.

Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7

Hi Gurs,
I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
The error is:
Update mode "Full Upload" is not supported by the extraction API
Message no. R3011
Diagnosis
The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
System Response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or send a problem message of your own.
Your help in this regd. would be highly appreciated.
Thanks,
David.

Hi David,
I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
Try to switch you DTPs/Infopackages to Delta mode.
While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
BR
m./

Time Stamp Error while extracting data from R/3

Hi,
We are getting time stamp error while extracting data from R/3.
To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
Please suggest me to solve.
Thanks
Subba Rao

Hi,
Time stamp error arises when the time stamp of the data source in source system and target system are different.
For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
Here are some useful links.
[R3 016 Time stamp error where is it in BI?;
[time stamp error in bi7;
[Timestamp error in BI7;
Thanks,
Venu

URGENT : Error: Please create data processing function module

Hi
I am getting the folloiwng error
"Please create data processing function module" in table maintainence.
It is working fine in dev environment but not in QA and production.
Pleae help.
Regards
Kalpesh

Hi Kalpesh,
I see it is something to do with the naming convention used in the quality and production system. These must have been setup differently compared to ur development system. So check with different naming conventions.
Reward points if helpful.
Cheers
Shafiq

Travel Display Form: Error while determining the form function module

Hi,
In Travel Reqeust (ECC6/ESS) when i click the Display Form after raising the Travel Request it shows the error
"Error while determining the form function module"
Can anyone have idea on this?
Regards,
Boobalan

Hi,
This error was due to Not supported platforms of ADS (Adobe Document services)
It was not supported on itanium64 bit processors.
Please check where the ADS is supported in service.sap.com/pam
You can use the ADS in the Non-Supported Server by linking it to Supported Platform Server using the SM59 link. This will make the ADS files to work.
Please refer the ADS Config Doc for details.
Hope you also solve this problem.
Regards,
Boobalan

Error while insert data using execute immediate in dynamic table in oracle

Error while insert data using execute immediate in dynamic table created in oracle 11g .
first the dynamic nested table (op_sample) was created using the executed immediate...
object is
CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
mark1 number,
mark2 number
t_sub_mark is a class of type sub_mark
CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
create table sam1(id number,name varchar2(30));
nested table is created below:
begin
EXECUTE IMMEDIATE ' create table '||op_sample||'
(id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
end;
now data from sam1 table and object (subject_obj) are inserted into the dynamic table
declare
subject_obj t_sub_mark;
begin
subject_obj:= t_sub_mark();
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
end;
and got the below error:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7
then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
execute immediate 'insert into '||dynam_table ||'
(SELECT

887684 wrote:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically.

Error while determining the form function module

Hi everyone,
We are experiencing problems while displaying one adobe form in ESS. Its the Travel Expense form (PTRV_EXPENSE_FORM). When pressing the button to Display/Print the form we get an error message: "Error while determining the form function module", and no form I shown. The ADS server is configured correctly and there are other forms that are actually working, for example the Travel Request form. We are running WAS 7.0 with SP12.
Anyone has an idea what can cause the problem? Any help is greatly appreciated.
Thanks in advance!
Regards,
Sophie

Viktor,
Thank you for your answer, it solved our problem!
Regards,
Sophie

Error While extracting data from FIAA and FIAP

Hi Gurus,
I am facing error while extracting data from R/3 Source. 0FIAA, 0FIAP datasources. I am getting the same error repeatedly. No data will come BW. When I checked in RSA3 I can extract records.
Ther Error is as follows:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Kindly help. Your points are assured.
Thanks and Regards
Prasad

Hello Prasad,
Have you already checked what happened in the source system ?
You should verify if a job is running in sm37, or if there is no dump runtime errors due to the extraction in st22.
It could be a clue of what happened in R/3.
Let us know,
Regards,
Mickael

Error : J_2IRG1BAL, Create data processing Function module

Sap Experts,
when i go to se11 in which have given table name: J_2IRG1BAL, than i gone menu bar click on utilities select the table contents
click on create entries button.
1) Error Message : Create data processing function module
2) This table Relevant to RG1 Updation
3) Due to this error I am not able to upload the opening stock of finished material manuaaly
4) What are the actions need to be done to rectify the above error.
Regards,
Prabhakar

Hi
Ask your ABAPER to create the maintainence view of the table
regards
Sanil Bhandari

Runtime Error while extracting data by datasource based on function module

Hi all,
I am facing an issue while extracting data from a customised data source based on a new function module.
The datasource is extracting data successfully for only 15000 records but after that the runtime error is displayed.
I am not able to extract whole data from R/3 system.
Please take a look into the details and tell me what should I have to do.
Details of Issue:
Runtime Error : GETWA_NOT_ASSIGNED
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLZ_99Z_BW_SD_PRICING"had to be terminated because it has come across a statement that unfortunately cannot be executed.
Error analysis
You attempted to access an unassigned field symbol
    (data segment 32790).
This error may occur if
    - You address a typed field symbol before it has been set with
      ASSIGN
- You address a field symbol that pointed to the line of an
      internal table that was deleted
    - You address a field symbol that was previously reset using
      UNASSIGN or that pointed to a local field that no
      longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
      not in the list of active calls. The list of active calls
      can be taken from this short dump.
Edited by: anshu13 on Apr 27, 2010 10:28 AM

The code is displayed here:
error is in line no. 625
Source Code Extract
Line SourceCde
595            <fs_fldval> = l_fieldval.
596            APPEND <fs_dyntable> TO <it_dyntable>.
597            CLEAR :l_fieldval, wa_fldcat.
598            CLEAR l_totlength.
599            CLEAR <fs_dyntable>.
600         ENDIF.
601        ENDIF.
602        MOVE-CORRESPONDING <dd03l_fields> TO wa_dd03l.
603        IF <dd03l_fields>-datatype EQ 'DATS'.
604          l_fieldval = 'X'.
605       ELSE.
606        SHIFT <dd03l_fields>-intlen LEFT DELETING LEADING '0'.
607          IF l_totlength IS INITIAL.
608            SHIFT l_totlength LEFT DELETING LEADING '0'.
609            l_totlength = '0'.
610          ENDIF.
611          l_currlength = <dd03l_fields>-intlen.
612          CONCATENATE l_totlength '(' l_currlength ') ' INTO l_fieldval .
613          l_totlength = l_totlength + l_currlength.
614        ENDIF.
615*** Consider both field name and domian name for checking in range list:
616        IF <dd03l_fields>-fieldname IN s_fieldlist.
617          wa_fldcat-fieldname = <dd03l_fields>-fieldname.
618        ELSEIF <dd03l_fields>-domname IN s_fieldlist.
619          wa_fldcat-fieldname = <dd03l_fields>-domname.
620        ELSE.
621          wa_fldcat-fieldname = <dd03l_fields>-fieldname.
622        ENDIF.
623        ASSIGN COMPONENT wa_fldcat-fieldname
624             OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
>>>>|        <fsfldval> = l_fieldval._
626        CLEAR l_fieldval.
627        CLEAR l_currlength.
628      ELSE.
629        IF <dd03l_fields>-datatype EQ 'DATS'.
630          l_fieldval = 'X'.
631       ELSE.
632          SHIFT <dd03l_fields>-intlen LEFT DELETING LEADING '0'.
633          IF l_totlength IS INITIAL.
634            SHIFT l_totlength LEFT DELETING LEADING '0'.
635           l_totlength = '0'.
636          ENDIF.
637          l_currlength = <dd03l_fields>-intlen.
638          CONCATENATE l_totlength '(' l_currlength ') ' INTO l_fieldval .
639         l_totlength = l_totlength + l_currlength.
640        ENDIF.
641*** Consider both field name and domian name for checking in range list:
642        IF <dd03l_fields>-fieldname IN s_fieldlist.
643        wa_fldcat-fieldname = <dd03l_fields>-fieldname.
644       ELSEIF <dd03l_fields>-domname IN s_fieldlist.
Edited by: anshu13 on Apr 27, 2010 11:33 AM

Error while extracting data from Generic datasource

Hello Gurus,
I have encountered an error "Errors in source system" with status red while extracting data from generic datasource into DSO.
I have done below things:-
1. Checked the jobs in source system, the job is successfully completed
2. The generic datasource is active and supporting delta with calender day in source system.
3. No TRfc error and no idocs stucked.
4. No short dumps in source system.
5. The delta queue(RSA7) is showing 0 with status as green.
6. Replicated the datasource On BW side and also activated the transfer rules by RS_TRANSU_ACTIVATE_ALL
The problem has not yet solved. Could you guys please suggest me what might be the reason for this error......
Thanks,
Sonu

Hello,
I have used the generic delta using calender day.
Safety upper limit : - 1
Safety lowerr limit : - 0
I have made the entries in va01 transaction, but the delta queus is not getting updated which should show 1.
Do Generic extraction require any job to transfer data from Database table to delta queue.
We are not able to get the delta records on BW side. Please suggest.
Please suggest.
Thanks,
Sonu

Updating liveCache Data using Function Module or ABAP program.

Is it possible to update APO Live Cache using Function Module or ABAP Program.
Will the aggregation/disaggreagation remain the same if data is modified using Function Module or ABAP Program.
Regards,
Vikas

ello Vikas,
-> Please click at
http://help.sap.com/saphelp_nw04/helpdata/en/f2/0271f49770f0498d32844fc0283645/frameset.htm
& read about 'SAP liveCache'.
As you know objects stored in liveCache in the class containers can be accessed
and manipulated only via LCA routines which are methods of LCA objects.
The registration of the LCA routines is done automatically when
the liveCache is started by the LC10, check the lcinit.log file.
The shared procedures in the LiveCache are written in C++ and shipped
to the customers as binary shared libraries(LCA-Routines) < LCA build >
together with the LiveCache. The original C++ source code of the
libraries is not generally available to the customers.
The LCA routines could be called via "/SAPAPO/OM*" ABAP functions.
-> For SAP liveCache documentation in English:
http://help.sap.com/saphelp_nw04/helpdata/en/f2/0271f49770f0498d32844fc0283645/frameset.htm
< -> Database Administration in CCMS: SAP liveCache -> liveCache Assistant ->
liveCache: Monitoring -> Problem Analysis-> DB Procedures >
In transaction LC10 for the LCA connection choose liveCache:Monitoring
then go to Problem Analysis -> DB Procedures=>
The system displays an overview of all database procedures loaded into
liveCache, their input and output parameters, and other details.
-> Tr. /n/SAPAPO/OM16 ( in further releases /n/sapapo/om19 ) is provided by
SAP to get information about data stored in the LiveCache. If you would
like to get your own views, you should write a special report in ABAP using
"/SAPAPO/OM"-development class functionality.
-> There are standard function modules in ABAP available to extract/change data from/in liveCache.
-> In addition to the given information => find more information at:
SCM 4.0 -> http://help.sap.com/saphelp_scm40/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
SCM 4.1 ->
http://help.sap.com/saphelp_scm41/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
SCM 5.0 ->
http://help.sap.com/saphelp_scm50/helpdata/en/12/3dfd81126e1c448c870f335f11d016/frameset.htm
You can go to the Advanced Planner and Optimizer documentation from the above links < Supply Network Planning Run -> Aggregated Planning -> SNP Disaggregation Or SNP aggregation . >.
If you still have open questions on the posted topic =>
Could you please give more information on your application scenario.
Thank you and best regards, Natalia Khlopina

Error while extracting data using function module

Similar Messages

Maybe you are looking for