Error while extracting data via UD Connect
Hi,
Trying for the first time to connect Oracle data base/JDBC connection type via UD connect(we are in BI 7.0).While creating the data source and assigning UD Connect source object in the extraction tab,following error is obtained" UDCADAPTERROR::RSSDK100 ,cannot open connection"
Appreciate if anybody can advice me on this..checked the RFC connection in BW and its working ok.
regards
savi
Hi Michael, we have JDBC connection tested in TestJDBCPage.jsp and working good, only have problems in Schema for access to tables, but in SQL test using Schema the result is ok.
How we can get Logs for detect the problem in msg : <b>UDCADPTERERROR::RSSDK|200|TABLE:</b>
We apreciate you collaboration, thank you.
Similar Messages
-
Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7
Hi Gurs,
I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
The error is:
Update mode "Full Upload" is not supported by the extraction API
Message no. R3011
Diagnosis
The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
System Response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or send a problem message of your own.
Your help in this regd. would be highly appreciated.
Thanks,
David.Hi David,
I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
Try to switch you DTPs/Infopackages to Delta mode.
While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
BR
m./ -
Error While extracting data from FIAA and FIAP
Hi Gurus,
I am facing error while extracting data from R/3 Source. 0FIAA, 0FIAP datasources. I am getting the same error repeatedly. No data will come BW. When I checked in RSA3 I can extract records.
Ther Error is as follows:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Kindly help. Your points are assured.
Thanks and Regards
PrasadHello Prasad,
Have you already checked what happened in the source system ?
You should verify if a job is running in sm37, or if there is no dump runtime errors due to the extraction in st22.
It could be a clue of what happened in R/3.
Let us know,
Regards,
Mickael -
Time Stamp Error while extracting data from R/3
Hi,
We are getting time stamp error while extracting data from R/3.
To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
Please suggest me to solve.
Thanks
Subba RaoHi,
Time stamp error arises when the time stamp of the data source in source system and target system are different.
For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
Here are some useful links.
[R3 016 Time stamp error where is it in BI?;
[time stamp error in bi7;
[Timestamp error in BI7;
Thanks,
Venu -
Error while extracting data from a remote system
Hi,
I am facing problem while extracting data from a remote system. The connection is alright I can extract the table required from the remote system,but when I deploy it I get this error
ORA-04052: error occurred when looking up remote object [email protected]@ORACLE_UBN_15_LOCATION1
ORA-00604: error occurred at recursive SQL level 1
ORA-28000: the account is locked
ORA-02063: preceding line from UBNDW@ORACLE_UBN_15_LOCATION1
here Scott.demo1 is the table and UBNDW is the sid of the remote system and ORACLE_UBN_15_LOCATION1 is the location. Please help me out with this
ThanksHi,
IDOC's need to be processed manually either in OLTp or in BW depending on the failure. Error msg in monitor status will take u to either BW or OLTP whernever there is a prob. Process IDOC's , this will start the left over packets and will finish the load.
we hav to check IDOC in WE05(t-code) and know the status these are WE51,WE52,WE53 AND GOTO WE19 there we hav to execute the exist Idoc will succesfully loaded Idoc
Goto St22 see the short dump error msg..
post if there any inf..
Thanks,
Shreya -
Error while extracting data from Generic datasource
Hello Gurus,
I have encountered an error "Errors in source system" with status red while extracting data from generic datasource into DSO.
I have done below things:-
1. Checked the jobs in source system, the job is successfully completed
2. The generic datasource is active and supporting delta with calender day in source system.
3. No TRfc error and no idocs stucked.
4. No short dumps in source system.
5. The delta queue(RSA7) is showing 0 with status as green.
6. Replicated the datasource On BW side and also activated the transfer rules by RS_TRANSU_ACTIVATE_ALL
The problem has not yet solved. Could you guys please suggest me what might be the reason for this error......
Thanks,
SonuHello,
I have used the generic delta using calender day.
Safety upper limit : - 1
Safety lowerr limit : - 0
I have made the entries in va01 transaction, but the delta queus is not getting updated which should show 1.
Do Generic extraction require any job to transfer data from Database table to delta queue.
We are not able to get the delta records on BW side. Please suggest.
Please suggest.
Thanks,
Sonu -
Runtime Error while extracting data by datasource based on function module
Hi all,
I am facing an issue while extracting data from a customised data source based on a new function module.
The datasource is extracting data successfully for only 15000 records but after that the runtime error is displayed.
I am not able to extract whole data from R/3 system.
Please take a look into the details and tell me what should I have to do.
Details of Issue:
Runtime Error : GETWA_NOT_ASSIGNED
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLZ_99Z_BW_SD_PRICING"had to be terminated because it has come across a statement that unfortunately cannot be executed.
Error analysis
You attempted to access an unassigned field symbol
(data segment 32790).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
Edited by: anshu13 on Apr 27, 2010 10:28 AMThe code is displayed here:
error is in line no. 625
Source Code Extract
Line SourceCde
595 <fs_fldval> = l_fieldval.
596 APPEND <fs_dyntable> TO <it_dyntable>.
597 CLEAR :l_fieldval, wa_fldcat.
598 CLEAR l_totlength.
599 CLEAR <fs_dyntable>.
600 ENDIF.
601 ENDIF.
602 MOVE-CORRESPONDING <dd03l_fields> TO wa_dd03l.
603 IF <dd03l_fields>-datatype EQ 'DATS'.
604 l_fieldval = 'X'.
605 ELSE.
606 SHIFT <dd03l_fields>-intlen LEFT DELETING LEADING '0'.
607 IF l_totlength IS INITIAL.
608 SHIFT l_totlength LEFT DELETING LEADING '0'.
609 l_totlength = '0'.
610 ENDIF.
611 l_currlength = <dd03l_fields>-intlen.
612 CONCATENATE l_totlength '(' l_currlength ') ' INTO l_fieldval .
613 l_totlength = l_totlength + l_currlength.
614 ENDIF.
615*** Consider both field name and domian name for checking in range list:
616 IF <dd03l_fields>-fieldname IN s_fieldlist.
617 wa_fldcat-fieldname = <dd03l_fields>-fieldname.
618 ELSEIF <dd03l_fields>-domname IN s_fieldlist.
619 wa_fldcat-fieldname = <dd03l_fields>-domname.
620 ELSE.
621 wa_fldcat-fieldname = <dd03l_fields>-fieldname.
622 ENDIF.
623 ASSIGN COMPONENT wa_fldcat-fieldname
624 OF STRUCTURE <fs_dyntable> TO <fs_fldval>.
>>>>| <fsfldval> = l_fieldval._
626 CLEAR l_fieldval.
627 CLEAR l_currlength.
628 ELSE.
629 IF <dd03l_fields>-datatype EQ 'DATS'.
630 l_fieldval = 'X'.
631 ELSE.
632 SHIFT <dd03l_fields>-intlen LEFT DELETING LEADING '0'.
633 IF l_totlength IS INITIAL.
634 SHIFT l_totlength LEFT DELETING LEADING '0'.
635 l_totlength = '0'.
636 ENDIF.
637 l_currlength = <dd03l_fields>-intlen.
638 CONCATENATE l_totlength '(' l_currlength ') ' INTO l_fieldval .
639 l_totlength = l_totlength + l_currlength.
640 ENDIF.
641*** Consider both field name and domian name for checking in range list:
642 IF <dd03l_fields>-fieldname IN s_fieldlist.
643 wa_fldcat-fieldname = <dd03l_fields>-fieldname.
644 ELSEIF <dd03l_fields>-domname IN s_fieldlist.
Edited by: anshu13 on Apr 27, 2010 11:33 AM -
Hi All.
The below is the error, which I am getting while extracting data.
Please let me know the reason, and how to overcome the below error.
Status Log
Warning ORA-02049: timeout: distributed transaction waiting for lock
Error ORA-01555: snapshot too old: rollback segment number 19 with name "_SYSSMU19$" too small
ORA-02063: preceding line from RPMSP@RPMSP_LOCATION
ORA-06512: at "SAI_USER.SA_PROD_SUMM_DYF_MAP", line 11
ORA-06512: at "SAI_USER.SA_PROD_SUMM_DYF_MAP", line 1622
ORA-06512: at "SAI_USER.SA_PROD_SUMM_DYF_MAP", line 2228
ORA-06512: at "SAI_USER.SA_PROD_SUMM_DYF_MAP", line 6253
ORA-06512: at line 1
Regards,Hi,
Even though you have deleted the data from Datatarget, but you have not yet deleted the delta initialization inforamtion at infopackage, before re starting the delta process. So delete the information from BW system , by double click infopackage--> Schedular(menu option) --> 'Initialization option for sourcesystem' --> delete the record.
With rgds,
Anil Kumar Sharma .P -
Error come while extracting data using DB Connect
Hi Exports!!!
We are not getting data in data target while fetching data from DB Conenct Exptraction method
We have created Source systme for DB Conenct . We are able to see data if we right click and select /EDIT database and display database content.
We can see error in Monitor::
[[No IDocs created; Database system
Diagnosis
No IDocs were created. The IDocs are created in BW with database systems as source systems. Since no IDocs were created, a short dump in BW probably occurred.
System response
Procedure
Check the short dumps in BW.]]
Please suggest !!!Hi,
so your connection is fine, in RSDBC you can see data, right? You generated your DataSource and then assigned source system DS to ISource.
What is your External DB system? If it is MSSQL then do NOT use the user sa for the connection. Create a "BWUser" in your MSSQL with all adequate rights.
Then create a view with this user.
CREATE VIEW BWUser.MYVIEW AS SELECT * FROM dbo.TABLE.
Generate you DSource on BWUser.MYVIEW instead of on a dbo.* object.
This should work it out.
Also remind that you fields names have to cope with the DCOnnect restrictions (upper case, no / only alphanumeric chars)
Note that there is no IDOC transfer between both systems thus the error msg is just because the source didn't not bring any data to BW; the msg is misleading you...
let me know
hope this helps...
Olivier.
Message was edited by:
Olivier Cora -
Error while extracting data from essbase
Hi All,
Now I'm tring to extract data from essbase by ODI, and at the sametime, I need to do some transformations, such as join with other relational tables or flat files to get more information about metadata. But unfortunately, once I add join into the interface, an error occurs. And it works fine if I extract directly (with no joins).
Is there any other way except using staging table? Our data vloume is large, using staging table will waste lots of storages.
The messages as below.
2011-07-12 23:34:00,931 INFO [DwgCmdExecutionThread:null:49]: ODI Hyperion Essbase Adapter Version 9.3.1.1
2011-07-12 23:34:00,931 INFO [DwgCmdExecutionThread:null:49]: Connecting to Essbase application [CORPPROD] on [172.18.93.150]:[1423] using username [admin].
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Successfully connected to the Essbase application.
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase data extract LKM option EXTRACTION_QUERY_FILE = D:\ODI_ESS_QUERIES\QUERY.TXT
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase data extract LKM option EXTRACTION_QUERY_TYPE = ReportScript
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option PRE_CALCULATION_SCRIPT = null
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase data extract LKM option EXT_COL_DELIMITER =
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option PRE_EXTRACT_MAXL =
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option POST_EXTRACT_MAXL =
2011-07-12 23:34:00,962 INFO [DwgCmdExecutionThread:null:49]: Essbase Load IKM option ABORT_ON_PRE_MAXL_ERROR = true
2011-07-12 23:34:00,962 DEBUG [DwgCmdExecutionThread:null:49]: inside getAppData()
2011-07-12 23:34:00,962 DEBUG [DwgCmdExecutionThread:null:49]: Got Source Metadata
2011-07-12 23:34:01,119 ERROR [DwgCmdExecutionThread:null:49]: The number of columns returned by script [13] is less than the source data columns exposed [14]
com.hyperion.odi.essbase.ODIEssbaseException: The number of columns returned by script [13] is less than the source data columns exposed [14]
at com.hyperion.odi.essbase.wrapper.EssbaseReportDataIterator.validateColumns(Unknown Source)
at com.hyperion.odi.essbase.wrapper.EssbaseReportDataIterator.init(Unknown Source)
at com.hyperion.odi.essbase.ODIEssbaseDataReader.getAppData(Unknown Source)
at com.hyperion.odi.essbase.AbstractEssbaseReader.extract(Unknown Source)
at sun.reflect.GeneratedMethodAccessor769.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
at java.lang.reflect.Method.invoke(Unknown Source)
at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java)
at org.python.core.PyMethod.__call__(PyMethod.java)
at org.python.core.PyObject.__call__(PyObject.java)
at org.python.core.PyInstance.invoke(PyInstance.java)
at org.python.pycode._pyx85.f$0(<string>:1)
at org.python.pycode._pyx85.call_function(<string>)
at org.python.core.PyTableCode.call(PyTableCode.java)
at org.python.core.PyCode.call(PyCode.java)
at org.python.core.Py.runCode(Py.java)
at org.python.core.Py.exec(Py.java)
at org.python.util.PythonInterpreter.exec(PythonInterpreter.java)
at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
at com.sunopsis.dwg.codeinterpretor.k.a(k.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execScriptingOrders(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlC.treatTaskTrt(SnpSessTaskSqlC.java)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
at com.sunopsis.dwg.cmd.e.k(e.java)
at com.sunopsis.dwg.cmd.g.A(g.java)
at com.sunopsis.dwg.cmd.e.run(e.java)
at java.lang.Thread.run(Unknown Source)
2011-07-12 23:34:01,119 INFO [DwgCmdExecutionThread:null:49]: Logging out and disconnecting from the essbase application.
From the working steps, I found a redundant column (Entity) was added while creating work table. Is it the reason?
create table HYP.C$_0CUX_ABC_HYP_INTERFACE
C14_HSP_RATES VARCHAR2(80) NULL,
C3_ACCOUNT VARCHAR2(80) NULL,
C10_PERIOD VARCHAR2(80) NULL,
C7_SCENARIO VARCHAR2(80) NULL,
C9_CURRENCY VARCHAR2(80) NULL,
C15_YEAR VARCHAR2(80) NULL,
C6_DATATYPE VARCHAR2(80) NULL,
C2_VERSION VARCHAR2(80) NULL,
C1_CATEGORY VARCHAR2(80) NULL,
C12_ENTITY VARCHAR2(80) NULL,
C13_ENTITY VARCHAR2(80) NULL,
C11_DEPARTMENT VARCHAR2(80) NULL,
C8_PROJECT VARCHAR2(80) NULL,
C5_DATA NUMBER(18,8) NULL
Appriciated!Extract the essbase data to a staging area and then do the transformations in another interface.
The adaptor needs to extract the data first.
Cheers
John
http://john-goodwin.blogspot.com/ -
Error while extracting data from Generic VBAK Table
Hi,
When i am extracting data from VBAK using generic extraction via tavle, i am, getting the error "Syntax error in program "SAPLXRSA ""
What happened?
Error in the ABAP Application Program
The current ABAP program "SAPLRSAP" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "SAPLXRSA " in include "ZXRSAU01
" in
line 159:
"The type of the database table and work area (or internal table) "L_ST"
"R_CE1IDEA" are not Unicode convertible. ."
Please help me out in fixing this,
Thansk,do you have an user-exit? if yes, post the code....
did you try regenerating the entire stuff (ds, structure,...)...there might be a mismatch between the structures of datasource and the generated extraction program....
M. -
Error while creating data server to connect into Hyperion Financial Manag.
Hi Cezar and others gurus,
I need some help in the follow issue:
I imported the technologie HFM (hyperion financial management) and it`s now displayed normally in the Physical and Logical architecture.
The drivers imported are: HFMdriver.dll
log4j-1.2.8.jar
odi_hfm.jar
odihapp_common.jar
And also imported the KMs about HFM.
Everything doing fine but when i try to create a data server into Physical Architecture, and went to test it, two different errors are shown (below).
i've already read many documentations but they didn't help.
I have ODI 10.1.3.4.0 and the hyperion server is working fine.
ODI server, my ODI client and HFM are located in the local machine.
In the "Topology manager" in "Physical Architecture" under the "Hyperion Financial Management" I try to create "Data Server" and in the definition tab I filled "Name", "Server" (without port), "User", "Password".
In the JDBC tab I did nothing.
I go test and the errors appears.
In the physical schema in the definition tab I cannot fill the items "Application (Catalog)", "Application (Work catalog)" because they don`t have any option and i let them "undefined"
When i select "Local (no agent)",receive the error:
Connection failed
Java.lang.SQLException: Driver must be specified
java.sql.SQLException: Driver must be specified
at com.sunopsis.sql.SnpsConnection.a(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java)
at com.sunopsis.sql.SnpsConnection.testConnection(SnpsConnection.java)
at com.sunopsis.graphical.r.or.o(or.java)
at com.sunopsis.graphical.r.or.r(or.java)
at com.sunopsis.graphical.r.or.g(or.java)
at com.sunopsis.graphical.r.or.a(or.java)
at com.sunopsis.graphical.r.or.a(or.java)
at com.sunopsis.graphical.r.il.actionPerformed(il.java)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.Dialog$1.run(Unknown Source)
at java.awt.Dialog.show(Unknown Source)
at java.awt.Component.show(Unknown Source)
at java.awt.Component.setVisible(Unknown Source)
at com.sunopsis.graphical.r.or.q(or.java)
at com.sunopsis.graphical.r.or.<init>(or.java)
at com.sunopsis.graphical.frame.a.ji.bx(ji.java)
at com.sunopsis.graphical.frame.bn.w(bn.java)
at com.sunopsis.graphical.frame.bn.d(bn.java)
at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener$ReleasedAction.actionPerformed(Unknown Source)
at javax.swing.SwingUtilities.notifyAction(Unknown Source)
at javax.swing.JComponent.processKeyBinding(Unknown Source)
at javax.swing.JComponent.processKeyBindings(Unknown Source)
at javax.swing.JComponent.processKeyEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.KeyboardFocusManager.redispatchEvent(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.dispatchEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
and when i select a agent created before, i receive:
Connection failed
Java.land.Exception
at com.sunopsis.graphical.r.or.a(or.java)
at com.sunopsis.graphical.r.or.s(or.java)
at com.sunopsis.graphical.r.or.g(or.java)
at com.sunopsis.graphical.r.or.a(or.java)
at com.sunopsis.graphical.r.or.a(or.java)
at com.sunopsis.graphical.r.il.actionPerformed(il.java)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.Dialog$1.run(Unknown Source)
at java.awt.Dialog.show(Unknown Source)
at java.awt.Component.show(Unknown Source)
at java.awt.Component.setVisible(Unknown Source)
at com.sunopsis.graphical.r.or.q(or.java)
at com.sunopsis.graphical.r.or.<init>(or.java)
at com.sunopsis.graphical.frame.a.ji.bx(ji.java)
at com.sunopsis.graphical.frame.bn.w(bn.java)
at com.sunopsis.graphical.frame.bn.d(bn.java)
at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
at javax.swing.AbstractButton$ForwardActionEvents.actionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
at java.awt.Component.processMouseEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
Some help will be gratefully aprecciated.
Thanks in advance,
Best regards,
Daniel HeinGood morning Cts and other gurus,
Thanks for the answer but i'm still not able to connect to HFM.
I am getting an error while trying to reverse engineer (this errors is shown at Agent): error ocurred in driver while connecting to HFM [<undefined>] on [apphyp] using user-name [sql_hyp].
Caused by: com.hyperion.odi.hfm.wrapper.HFMexception: opening HFM application failed. Error code: 0x80046053 [This application is not registered with Hyperion Shared Services. Please contact your administrator]
You told me that it`s normal the error when i try to test the data server but both Application (catalog) and Application (Work) stay <undefined> and nothing can be select in that section. I guess this should be completed with my existing applications ate HFM.
Probably, the error mentioned happens because this item "Application" isn`t correct.
What am i missing?
Thanks in advance,
Best regards,
Daniel Hein -
Error while extracting data from CRM
Dear all,
I have used some standard and generic datasources to extract data from CRM. These were working fine for more than a year and are scheduled in Process chains. For the past few days I am getting Caller 09 error as shown below, only for the generic datasources. I have checked the connection,replicated the datasources and activated them, reinitialized and have tried all the solutions that were posted earlier, but still the process chain fails. When I execute the process chain for generic datasources manually, it is working fine.
When I tried in RSA3 for both standard and generic datasources in CRM with update mode D, I get a message 'Error occured during the extraction',
Kindly suggest what can be the problem.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Thanks all in advance.
Regards
Adhira AnandHi Meyappan,
I have checked SM37, SM21 and ST22. There are no errors.
in SM37 the below log is displayed.
Job started
Step 001 started (program SBIE0001, variant &0000000005420, user ID ALEREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = ZCRM_SRV_DEFECT
RLOGSYS = CLNT645BIP
REQUNR = REQU_4JHQ8HH6KA40JHC1TYLYIV2W2
UPDMODE = D
LANGUAGES = *
Current Values for Selected Profile Parameters *
abap/heap_area_nondia......... 2000000000 *
abap/heap_area_total.......... 2000000000 *
abap/heaplimit................ 40000000 *
zcsa/installed_languages...... DE *
zcsa/system_language.......... E *
ztta/max_memreq_MB............ 2047 *
ztta/roll_area................ 6500000 *
ztta/roll_extension........... 2000000000 *
1 LUWs confirmed and 1 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
IDOC: Info IDoc 2, IDoc No. 101415, Duration 00:00:00
IDoc: Start = 13.10.2010 22:51:39, End = 13.10.2010 22:51:39
Synchronized transmission of info IDoc 3 (0 parallel tasks)
IDOC: Info IDoc 3, IDoc No. 101416, Duration 00:00:00
IDoc: Start = 13.10.2010 22:51:42, End = 13.10.2010 22:51:42
Job finished -
Error While Extracting Data in ODS
can anyone help me out i have created an ODS ZMM_OD81 but i got the following error messaged while extracting the data, pl. help me asap.
1. SIDs determined successfully for request REQU_3YGDERK275SLEUNKLGWOR30GZ from ODS object ZMM_OD81
2. Request REQU_3YGDERK275SLEUNKLGWOR30GZ , data package 000001 incorrect with status 9
3. Request REQU_3YGDERK275SLEUNKLGWOR30GZ , data package 000001 not correct
4. Inserted records 1- ; Changed records 1- ; Deleted records 1-
5. No confirmation for request ODSR_3YGHO1DSYIDFO0B7E8ZO2Q8MB when activating the ODS object ZMM_OD81
6. Communication error (RFC call) occurred
7. Activation of data records from ODS object ZMM_OD81 terminated.
thanx
abhishek suppalHi Abhishek,
I guess the error occured while activating the request and not while loading it. You can confirm this by checking in the details tab of the monitor for that request.
Try following the below steps. They might solve your problem.
1> Go to manage view of the ODS and force the QM status of the request to 'GREEN'.
2> Try activating the request manually.
Regards,
Sree -
Error while Extracting data using RSCRM_BAPI
Friends
We are on 3.5 system upgraded recently. I am getting the following Error message while trying to extract data from a query to a table using the transaction RSCRM_BAPI. The Error message says ' Internal Error in Method CHECK_TABLE_NAME(RSCRMBW_EX_NAMESPACE_GET).
This was working fine prior to upgrade. I scoured all the OSS notes, could not find an appropriate one to solve the issue.
Have you had this problem and any thoughts on resolution ? Appreciate your inputs very much.
Regards
Mathur SreedharHi Mathur,
did you ever resolved this Issue? if so can yoou share with me the solution. i am having the same problem, we are in 3.0 . it works fine in Development and Test. but when i try it in Production . i get this error.
'Internal error in method CHECK_TABLE_NAME (RSCRMBW_EX_NAMESPACE_GET)..
if you know the answer. would please share with me.
your help would be greatly appreciated.
Thanks.
Sreeni.
Maybe you are looking for
-
Install oracle 10.2.0.5 on windows 7 32 bits
Hi all , I want to install oracle 10.2.0.5 on windows 7 (32bits) but in the websit I found <B>"Oracle Database 10g Release 2 (10.2.0.5) Enterprise/Standard Edition for Microsoft Windows (64-bit Itanium)" [http://www.oracle.com/technetwork/database/10
-
I have a function that I created and am trying to use it to output data using a ref cursor. My function call is declare ret_cursor crsiweb.types.cursorType; type output_rec_type is record( location varchar2(100), client varchar2(100), number_in long,
-
Is there anyway to change the amount of Wireless B...
I think I know what the answer is but here goes:- Is there anyway to change the amount of Wireless Bandwidth given to a certain device from the HH3?? The reason why I ask is, that I have a number of devices that connect to my wireless connection and
-
Charged twice for skype credit reload
Hi, I reloaded my Skype credit with $35 and it didn't seem like it was going through the first few times I tried so I did it until I knew it had gone through. Turns out it loaded twice instead of once. I don't need that much credit especially since t
-
CAT2: Restrict through P_PERNR
Hi Experts, I want to restrict the user by using CAT2 transaction only for their personnel no. For that i maintained user parameter CVR & PER in SU3 and it worked fine by defaulting DATA ENTRY PROFILE & PERSONNEL NO. Now, I have to set authorization