Error while extracting through delta DTP

Hi All ,
   I am extracting data from one DSO say A to another DSO say B . For the first time when i am executing the first DTP load which is full load it is getting successfully executed . In this DTP the data is being taken from the active table .
After this when i am executing the delta DTP which is taking data from the change log the process is getting executed . I am getting data in the new data section . But the status of the table is remaining yellow.
When i am trying to forcefully make it green it is showing "Lock Table Overflow error" .
Can anyone tell me how to overcome this ??
thanks
Sam

hi Anup ,
   In 3.x we have to run init before delta . but in 7.0 when we run a delta dtp for the first time for loading into a Infoprovider , that delta update is marked as deltainit extraction and then the subsequent delta loads occur successfully .
Also i have ran that full dtp just to test whether full dtp is also giving same problem or not ? when it succeeded i deleted the data and then ran the delta DTP .
So the delta DTP is loading data for the first time into the DSO so it will act as deltainit.
Correct me if i am wrong.

Similar Messages

  • Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7

    Hi Gurs,
    I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
    The error is:
    Update mode "Full Upload" is not supported by the extraction API
    Message no. R3011
    Diagnosis
    The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
    System Response
    The data extraction is terminated.
    Procedure
    Check for relevant OSS Notes, or send a problem message of your own.
    Your help in this regd. would be highly appreciated.
    Thanks,
    David.

    Hi David,
    I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
    Try to switch you DTPs/Infopackages to Delta mode.
    While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
    BR
    m./

  • Error while extracting from BI source

    Hi,
    We are facing a wierd problem:
    Scenario:
    Loading data from one DSO to another DSO with the help of transformation
    The DTP fails at second data package each time. First data package goes successfully but it fails at the second data package) We have tried to vary the data package for e.g. 100 records, 5 records etc.....no matter what we do the load fails at the second data package with the following error message.
    Error:
    Data package processing terminated
    Error while extracting from source EPUD0002 (type InfoProvider)
    System error in program SAPLRS_EXCEPTION and form RS_EXCEPTION_TO_MESSAGE (see long text)
    Unknown error in SQL interface
    Error reading the data of InfoProvider EPUD0002
    Exception CX_RS_STEP_FAILED logged
    Workaround:
    We tried to increase the number of data package size so that all the records can be processed in only one data package and the load has never to request for 2nd data package . BUT as the data package size is big it takes long time to process and never completes....
    FYI...Our transformation has lots of abap coding ...
    Addn Info:
    SAP_BW   700   0010
    BI_CONT   703   0005
    SAP_BASIS  700  0010
    Any help will be highly appreciated...
    - Amit

    There must be some bug in the code which is causing this issue.
    try to debug it,
    refer: /people/community.user/blog/2007/03/29/sap-netweaver-70-bi-extended-capabilities-to-debug-a-data-transfer-process-dtp-request
    /people/dirk.herzog/blog/2005/02/11/abap-development-in-sap-bw

  • Error in Extraction through RSA3

    Hello,
    I am trying to extract data from my DataSource through RSA3, but Iam getting Error while Extraction data,.
    The display log error says"S:RSSDK:300 [DataDirect][SQLServer JDBC Driver]Object has been closed."
    Regards,
    Mayank
    Points -> Thanks

    The setting are fine. we have already checked that.
    If we delete our Infosource, is the FM created though this also gets deleted from the Function Group.
    Please let me know what else can be done on this error issue.
    Regards,
    Mayank

  • Error while extracting from DSO

    Hellow ! ! !
    Got a error message.
    Scenario:
    Tried Loading data from one DSO to another DSO through transformation.
    But, got a following error message.
    Error:
    Error while extracting from source 0FIGL_O02 (type DataStore)
    Message no. RSBK242
    Inconsistent input parameter (parameter: <unknown>, value <unknown>)
    Message no. RS_EXCEPTION101
    System:
    SAP_BW:700
    Support Package: SAPKW70016
    Regards,
    DongSun Choi

    Got same results though tried several times.
    Updated well  from DSO after Changing from transformation to  update rule.
    Think the transformation is some problem.
    Thanks a lot...
    dongsun, choi

  • Error while scheduling through web service

    We have created Web service through WSDL of OBI Publisher. Also we created a web service proxy client to call the services offered by OBI Publisher. We actually want to  "Automate the Scheduling of Reports" according to our requirement:
    1. We used to schedule the reports manually by giving the parameters(used to populate data in reports) and other fields like select report name, report destination, format of reports ( .pdf, .docx,etc) through Oracle BI Publisher.
    2. As there are thousands of permutations of report input parameters possible, so it is difficult to schedule them manually. 
    3.We also want to schedule report to a particular folder according to some parameter, for the ease of the user visibility.
    Above requirements are not currently available with Oracle BI Publisher.
    We are getting error while scheduling through ScheduleRequest class.
    The client.java is as follows:
    public class ScheduleServiceClient
      @WebServiceRef
      private static ScheduleService_Service scheduleService_Service;
      public static void main(String [] args)
        scheduleService_Service = new ScheduleService_Service();
        ScheduleService scheduleService = scheduleService_Service.getScheduleService();
        // Add your code to call the desired methods.
        try {      
                    FTPDeliveryOption ftpdo =new FTPDeliveryOption();
                    ftpdo.setFtpServerName("ServerName");
                    ftpdo.setFtpUserName("Username");
                    ftpdo.setFtpUserPassword("Password");
                    ftpdo.setRemoteFile("/path/TestFile");
                    ftpdo.setSftpOption(true);
                    List<FTPDeliveryOption> listobj=new ArrayList<FTPDeliveryOption>();
                    listobj.add(ftpdo);
                    ArrayOfFTPDeliveryOption ar =new ArrayOfFTPDeliveryOption(); 
                    ar.setItem(listobj);
                    DeliveryChannels dc = new DeliveryChannels();
                    dc.setFtpOptions(ar);
                    ScheduleRequest scheduleRequest = new ScheduleRequest();
                    scheduleRequest.setDeliveryChannels(dc);
                    scheduleRequest.setJobLocale("en-US");
                    scheduleRequest.setUserJobName("Job_1_WebService"); 
                    scheduleRequest.setDataModelUrl("Url");
                    scheduleRequest.setStartDate("Mar 27, 2015 12:40:00 PM");
                    scheduleRequest.setJobTZ("[GMT+05:30] Calcutta, Chennai, Mumbai, New Delhi");
                    String userID = "BI_Publisher_Username";
                    String password = "BI_Publisher_Password";
                    scheduleService.scheduleReport(scheduleRequest,userID,password);
                } catch(Exception exception) {
                    exception.printStackTrace();
    Snapshot of error is attached.
    Kindly suggest the way of getting out of this error.

    Hi
    Check this thread
    WD Message Manager
    Reward opints if usefull....

  • Error while extracting the data in R/3 production system,

    Hi Team,
    We got the following error while extracting the data in R/3 production system,
    Error 7 When Sending an IDoc R3 3
    No Storage space available for extending the inter 44 R3 299
    No storage space available for extending the inter R3 299
    Error in Source System RSM 340
    Please guide us to fix the issue

    It´s very difficult to help you without knowing
    - what is going to be transferred
    - where you get this error
    - system configuration
    - actual memory usage
    - operating system
    - database and configuration etc. etc.etc. etc.
    I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
    Markus

  • Error while extracting huge volumes of data from BW

    Hi,
    we see this error while extracting huge volumes of data (apprx 3.4 million and with more no.of columns) and we see this error.
    R3C-151001: |Dataflow DF_SAPSI_SAPSI3131_SAPBW_To_Teradata
    Error calling R/3 to get table data: <RFC Error:
    Key: TSV_TNEW_PAGE_ALLOC_FAILED
    Status: EXCEPTION SYSTEM_FAILURE RAISED
    No more storage space available for extending an internal table.
    >.
    We are not sure if DoP works with source as SAP BW, but when tried with DoP also, we got the same error.
    Will this issue be resolved with an R/3 or ABAP dataflow? Can anyone suggest some possible solutions for this scenario?
    Sri

    The problem is that you've reached the maximum memory configure for your system.
    If this is batch job reconfigure the profile parameter
    abap/heap_area_nondia
    Markus

  • Error While extracting data from FIAA and FIAP

    Hi Gurus,
    I am facing error while extracting data from R/3 Source. 0FIAA, 0FIAP datasources. I am getting the same error repeatedly. No data will come BW. When I checked in RSA3 I can extract records.
    Ther Error is as follows:
    Request still running
    Diagnosis
    No errors could be found. The current process has probably not finished yet.
    System response
    The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
    and/or
    the maximum wait time for this request has not yet run out
    and/or
    the batch job in the source system has not yet ended.
    Current status
    No Idocs arrived from the source system.
    Kindly help. Your points are assured.
    Thanks and Regards
    Prasad

    Hello Prasad,
    Have you already checked what happened in the source system ?
    You should verify if a job is running in sm37, or if there is no dump runtime errors due to the extraction in st22.
    It could be a clue of what happened in R/3.
    Let us know,
    Regards,
    Mickael

  • Error while extract DME file

    Hello Experts,
    One user is getting an error while extract DME (Payment File) from customized transaction. Other users are able to save the file on desired location.
    Error: C:\AB\filename.TXT not allowed in subscreens (Screen: )
    Please let me how to solve this issue.
    Thanks in advance.
    Regards,
    JA

    Closed Not Answered

  • Time Stamp Error while extracting data from R/3

    Hi,
        We are getting time stamp error while extracting data from R/3.
    To solve this problem we did replication and run RS_TRANSTRU_ACTIVATE_ALL program. still we are facing same problem.
    Please suggest me to solve.
    Thanks
    Subba Rao

    Hi,
    Time stamp error arises when the time stamp of the data source in source  system and target system are different.
    For we have again activate data source in R/3 system using transaction RSA5 or RSA6 and in BI system goto transaction RSDS and replicate the data source.
    You can also find time stamp details for a data source in tables ROOSGEN and ROOSOURCE tables in BI and R/3 system respectively.
    Here are some useful links.
    [R3 016 Time stamp error where is it in BI?;
    [time stamp error in bi7;
    [Timestamp error in BI7;
    Thanks,
    Venu

  • Error while extracting from source type InfoProvider)

    Dear Sdns,
                       Am trying to load the data from the exisitng standard cube to one new ZCUBE.. The time when am loading the data. am getting the following errors...
    <b>- Data package processing terminated     
    - Error while extracting from source 0FIGL_C10 (type InfoProvider)
    - ORA-01652: unable to extend temp segment by 128 in tablespace PSAPTEMP
    - SQL Error: 1652
    - Exception CX_RS_STEP_FAILED logged</b>
    Can any one help me out from this issue...
    Answering getz appreciated,
    Warm Regards,
    Hemanth Aluri

    Hi,
    It seems like Table space problem..check with your basis team.
    regards,
    raju

  • Error while extracting 0FI_GL_30 - Message RJ012

    Hi All,
    I am extracting Data Source in RSA3.
    I am getting the following Error Message.
    Error while Extracting Message RJ012
    Can Anyone will help in this issue?
    Thanks,
    Mayur

    Please check if SAP Note 1006441 is useful to your issue.
    Hope this helps!
    - Sheen

  • Error while extracting

    Hi,
    I keep getting the same error while extracting from various BC data sources. The error is about some Time Stamp. It says the time stamp in source is not the same as that in BW.
    I have replicated and activated again and again but keep getting that error.
    What are the reasons and how can it be fixed?
    Thanks
    Fran

    A.H.P
    if its due to plug in upgrade, will that program solve the problem? Or do we have to ensure the upgrade on the Basis side?
    thanks
    Fran

  • Application Manager gives back error (EX11) while installing InDesign CS6 (error while extracting in

    Hello, I need help regarding the Application Manager
    Application Manager gives back the error (EX11) while installing InDesign CS6 (error while extracting in temporary folders).
    I don´t have problems installing PS, Acrobat etc.
    Any idea?
    Thanks

    I would have never figured that out myself. Thank you so much! On behalf on my dad a big thanks as well, because he is going to use Adobe InDesign CC (2014).
    Here, a local, standard user account worked for me. However, the password of an Administrator account was required once.
    Here, any username longer than 13 created that error code, for example I tried "AInDesignCC14" unsuccessfully. Usernames with 12 or less characters worked, for example "InDesignCC14" worked.
    Just renaming an existing account did not work, because the personal folders did not change in name. Therefore, I was forced to create a new account.
    Windows 7 Ultimate (32bit, German), Apple Boot Camp; a vanilla installation

Maybe you are looking for