Error while extracting Vendor Data from R/3 system
Hi all,
I am trying to extract vendor data from R/3(ECC6.0) system to XI using Tcode MDM_CLNT_EXTR.
already I have maintained partner profile for the same.
I have given the necessary details like Creditor_extract,Target System and Distribution Mode as initial load.asusaully extraction process started and I found error in log file like"Table MASTER_IDOC_DATA is empty". Please help me if anyboday have idea about this.
Thanks in Advance,
Ravi.
Hi Ravi,
you've got to set up the message type MDMRECEIPT for the Idoc distribution from R/3 to XI. Check chapter 5.2 in the IT configuration guide available on <a href="http://service.sap.com/installmdm">MDM Documentation Center</a>. It describes the necessary steps.
BR Michael
Similar Messages
-
Error while extracting the data from R/3
HI all,
I am extracting HR data from R/3 system.
It is throwing the below error message.
Error: Splitting error User Exit employee/date/hrs 00100545 20071106 2.000
I am not sure how to rectify this error. Is this issue with data in R/3? Does it have to be corrected in R/3?
Do let me know what can be done.
Thanks in advance,
MaddyHi Maddy,
can you tell me if there are any routines used to split the employee, date and hrs fields data?
If so check for the code is with our systez errors?
What is the source system?
what is the data source?
Did you check for how the data exist in the source? goto RSA3 and check for the data how it look like for the employee , date and hrs records.
Regards
KP -
Error occured while extracting the data from BSIK Table
Hi Experts,
I am trying to extract the data from "BSIK" by using generic extraction by table, I am getting the error "Invalid extractiion Structure template BSIK of Data source XXXXXX", But when i am trying the same by using VIEW, i am able to do it,
I am getting same problem while extracting the data from other tables like "BSIK, BSAK.........."
can some one explain me why it is throughing some error when i am doing generic extraction by using Table,
Thanks,Hi,
Can you check below link:
Invalid extract structure template ZBW_VW_EKES of DataSource ZBW_SCN_VENDOR
Hope this answer your question!
Regards,
Nilima -
Error while extracting the data in R/3 production system,
Hi Team,
We got the following error while extracting the data in R/3 production system,
Error 7 When Sending an IDoc R3 3
No Storage space available for extending the inter 44 R3 299
No storage space available for extending the inter R3 299
Error in Source System RSM 340
Please guide us to fix the issueIt´s very difficult to help you without knowing
- what is going to be transferred
- where you get this error
- system configuration
- actual memory usage
- operating system
- database and configuration etc. etc.etc. etc.
I suggest you open an OSS call and let the support have a look on your system. It´s much easier if one has system access to find out the cause for that problem.
Markus -
Error while retrieving bulk data from mdm in staging server
I am getting an error while retrieving bulk data from MDM. The error goes like this "NiRawReadError: An error occured when reading data from socket.".
Could anyone please suggest me about the possible cause of this error. Please reply soon.
Moderator message: network error, relation to ABAP development unclear, please search for available answers, check with system administrators, consult SAP service marketplace.
Edited by: Thomas Zloch on Nov 22, 2010 5:16 PMCan you elaborate the thing... I don't think /*+ APPEND */ this is working for me ,still I am getting same error.
If you have any other suggestion,I would like to hear.
Should i not put commit after some 500 records inserted ? As i am putting commit once after whole data gets inserted. -
No data Exists error while retrieving the data from a table
Hi Everyone!
I am getting "No Data Exists" error while retrieving the data from a table....where i need to check...if possible please give me example link.....please help me regarding thisHi !
thanks for ur response...
I have written vo.executeQuery for the table...My page is running but i m not getting the data....I have to select two LOV's and when I click on Go button the data has to display in the table...After the selection of LOV's when I click on Go in the table "No data exists" message is appearing...the table has the data and the query is also executing...please give info where i did the mistake.... -
Error, while pushing the data from Oracle to MSSQL.
Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.[email protected] wrote:
Hi,
I am facing the below error, while pushing the data from Oracle to MSSQL.
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Transparent gateway for MSSQL][Microsoft][ODBC SQL Server Driver][SQL Server]Update or insert of view or function 'View_Name' failed because it contains a derived or constant field.[Microsoft][ODBC SQL Server Driver][SQL Server]Statement(s) could not be prepared. (SQL State: 00000; SQL Code: 8180)
Please suggest me, how to overcome from this.
Thanks.This is an error from SQL Server being passed back to Oracle so you can see the problem.
What it is saying is that you are trying to insert (or update) data to a database view and that view contains a column that is either a constant (literal) value or is derived (a calculation, formula or string concatenation etc.).
As such, you can't insert or update data on that column because it has nowhere to go on the database table(s) that underly the view. -
Error while loading the data from PSA to Data Target
Hi to all,
I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document posted
Info IDoc 2 : Application document posted
Info IDoc 1 : Application document posted
Info IDoc 4 : Application document posted
Info IDoc 3 : Application document posted
Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
Update PSA ( 2462 Records posted ) : No errors
Transfer Rules ( 2462 -> 2462 Records ) : No errors
Update rules ( 2462 -> 2462 Records ) : No errors
Update ( 0 new / 0 changed ) : Errors occurred
Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
SaranHi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM -
Error while loading the data from text file
Hi,
I got an error " Data Value Encountered before all Dimensions selected" while loading the data from the text file.
Can any one please suggest me the solution.Possible Solutions
Make sure that the data source is valid.
Is a member from each dimension specified correctly in the data source or rules file?
Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
Does the data source contain extra spaces or tabs?
Has the updated outline been saved? -
Error While Testing the Data from RWB
Hi Gurus,
While testing the data from my RWB --> Component Monitoring -->IE -->Test Message
I am getting the error as explained below:
Error while sending Message -->RWB
No header Mapping Defined -->Trace
Moreover when i was assigning Inbound Interface in the Interface Determination its shows in the popup window NOObjects Found instead of showing the Inbound interfaces.
Any help on this please
Regards
SreeniHi ,
without completing your configuration how are you testing your interface??
1)you need to add your source and receiver interfaces in business service,select your business service then add your outbound interface in sender tab and add your inbound interface in receiver tab,if it is business system not required.
2) then check your interface/operation mapping done perfectly between source and target interfaces.
if you have above steps done perfectly then your interface will work.
if you still getting error search in sdn with error message you will find usefull tips..or post in sdn.
Regards,
Raj -
Error while extracting the data
Hi All,
i am facing a problem while loading the data from the flat file to the DSO. i am working on BI 7. data is loaded to psa but all columns com under the one column. like this 10, jjj, a10, m10, s10, n. i know that i had made a mistake pls help me out.
Thanks & Regards
KKHi KK,
If it is a CSV file you need to select 'data format' as CSV... and 'data separator' as ',' in the extraction tab
Assign points if this helps.
Regards,
Anil -
Error while retracting the data from BW system
Dear all,
while retracting the data from BW we are getting the below dump
"Inconsistent entry in table TKA07 (Plan Version Maintenance)",Request you to please help to solve the issue
Thanks,
JyotiJyoti,
Could you please explain in detail, were you using any standard retractor or custom?
is it erroring out in ECC system or BI? -
Error 8 while loading the data from the souce system
Hi Gurus
Every day we are loading some data from one of our souce systems through process chain
But today all the loads failed complaining about error 8 while extacting the data
connection to source system is fine
we have the problem while loading master data from the same source system
any solution?
Thanks in advanceHi,
Check with basis team regarding any patches applied in source system or not ? If yes then replicate all data sources and activate again.
hope it helps...
regards,
Raju -
Set up for Extraction the data from SAP ECC system
Hi!
I would like to analyze the transaction and master data from SAP ECC system into SAP BI system.
I have created the connection (entry for SAP ECC system) within SAP NetWeaver System.
Unfortunately when I try to load the transaction data for Info source the process does not end successfully.
There are no information within SM58 on source system.
The ST22 does not contain some suitable information.
Question:
Which settings do I miss and how can solve my problem?
(user authorization, etc.)
Thank you very much!
regards
HolgerHi!
many thanks for your reply.
The error I get:
Errors while sending packages from OLTP to BI
Diagnosis
No IDocs could be sent to BI using RFC.
System Response
There are IDocs in the source system ALE outbox that did not arrive in the ALE inbox of BI.
Further analysis:
Check the TRFC log.
You can access this log using the wizard or the menu path "Environment -> Transact. RFC -> In source system".
Error handling:
If the TRFC is incorrect, check whether the source system is fully connected to BI. In particular, check the authorizations of the background user in the source
Can you please help me to identify the error?
Thank you! -
Error while extracting master data datasource into BI from SRM
Hi all,
We are implemting BI for SRM 7.0.
I am extracting data for 0BBP_PLANT_LOCMAP_ATTR dataource (master data) into PSA.While extracting I am getting the following error.
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document not posted .
Please suggest me what to do.
Thanks and Regards,
RajeshHI Check in the transactions BD84 and BD 87
in BD 87 u can process the Idocs manually
check the link it might be helpful
http://help.sap.com/saphelp_nw04/helpdata/en/78/21760251ce11d189570000e829fbbd/frameset.htm
Error "Application document not posted" when tried to receive an idoc
bd87
Regards,
MADhu
Maybe you are looking for
-
say for instance if i search "bob the builder" in google it pulls up search results for "bob the builder" of course the official page is the first link. so i click on the official page link and it redirects me through a goingonearth.com and through o
-
I can't download the new Pages since my computer doesn't have OS X 10.9. How can I get around the problem? Or is there anything to do about the problem that my Open Office has flipped and says that there are pages that needs to be re-opened, but I ca
-
Header and Item Data Extraction
Hi Gurus, For reporting needs, I have to extract both Sales Billing Header (2LIS_13_VDHDR) and Item Data (2LIS_13_VDITM). Can anyone please give me some idea about the Data Staging. 1. Do I need to create 2 DSO (1 for Header and 1 for Item) for load
-
I cant get my Magic mouse to connect now that I have a Mobee charger
I bought a Mobee Charger for my Mouse and now it wont connect.
-
Scripting the loading bar without a UILoader...
So I was using a UILoader to load my swf, but was having issues with the component, so I got rid of it, and am now using the following AS to load the file instead: var Xpos:Number=0; var Ypos:Number=0; var swf:MovieClip; var loader:Loader=new Loader(