Error while extracting XML file from the application server
Hi ,
I am writing a XML file into the application server, after which when i try to extract the file to the local server using the report - RFASLDPC ,
the file is extracted, but with a '#' symbol at the first position.
Because of which the XML File does not open. But after i open the file in notepad and manually delete the '#' symbol and then reopen the file, it works fine.
Is there any way to remove the '#' symbol while extracting itself ??
Thanks in advance,
Vikas.
Select the option "No Character Set Conversion" in stead of Code page 1100.
However, I still have troubles -> the downloaded xml file misses a space on several places. This causes errors too.
Similar Messages
-
Error while retreiving xml file from database
Hi-
I am trying to configure Planning and getting the following error message at instance configuration step:
"Error while retreiving xml file from database"
We looked at PlanningSystemDB.properties, changes server name to its ip, reinstalled planning, made sure both auth methods are selected (sql server and windows), created new relational repository.. still the same error.
Here is the contents of the configtool error file:
(Dec 11, 2008, 04:36:44 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:37:09 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:38:41 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:07 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:12 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:39:22 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
(Dec 11, 2008, 04:40:46 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(Dec 11, 2008, 04:41:05 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Failed to authenticate user = admin
(Dec 11, 2008, 04:48:28 PM), com.hyperion.cis.DBConfigurator, ERROR, Invalid SQL statement: begin transaction IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PROPERTIES]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PROPERTIES IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APP_CLUSTER_DTL]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APP_CLUSTER_DTL IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_APPLICATION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_APPLICATION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_DATASOURCE]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_DATASOURCE IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_CLUSTER]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_CLUSTER IF EXISTS (select * from sysobjects where id = object_id(N'[HSP_ACTION]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSP_ACTION IF EXISTS (select * from sysobjects where id = object_id(N'[HSPSYS_PI_INFO]') and OBJECTPROPERTY(id, N'IsUserTable') = 1) DROP TABLE HSPSYS_PI_INFO commit begin transaction CREATE TABLE HSP_ACTION ( ID INTEGER NOT NULL IDENTITY, CONSTRAINT PK_HSP_ACTION PRIMARY KEY(ID) , FROM_ID INTEGER, TO_ID INTEGER, ACTION_ID INTEGER, OBJECT_TYPE INTEGER, PRIMARY_KEY VARCHAR(255), ACTION_TIME DATETIME ); CREATE TABLE HSPSYS_CLUSTER ( CLUSTER_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), CONSTRAINT PK_HSPCLUSTER PRIMARY KEY(CLUSTER_ID) ); CREATE TABLE HSPSYS_DATASOURCE ( DATASOURCE_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), APP_ID INTEGER, RDB_SERVER_URL VARCHAR(255), RDB_TYPE VARCHAR(255) NOT NULL, RDB_CATALOG_NAME VARCHAR(255) NOT NULL, RDB_USER VARCHAR(255) NOT NULL, RDB_PASSWORD VARCHAR(255), RDB_DRIVER VARCHAR(255) NOT NULL, ESS_SERVER VARCHAR(255) NOT NULL, ESS_USER VARCHAR(255) NOT NULL, ESS_PASSWORD VARCHAR(255), CONSTRAINT PK_HSPDTASRC PRIMARY KEY(DATASOURCE_ID) ); CREATE TABLE HSPSYS_APPLICATION ( APP_ID INTEGER NOT NULL, NAME VARCHAR(255) NOT NULL, DESCRIPTION VARCHAR(255), DATASOURCE_ID INTEGER NOT NULL, CONSTRAINT FK_HSPAPP_DSID FOREIGN KEY(DATASOURCE_ID) REFERENCES HSPSYS_DATASOURCE, VERSION VARCHAR(255) NOT NULL, CONSTRAINT PK_HSPAPP PRIMARY KEY(APP_ID) ); CREATE TABLE HSPSYS_APP_CLUSTER_DTL ( APP_ID INTEGER NOT NULL , CONSTRAINT FK_HSP_APP_ID FOREIGN KEY (APP_ID) REFERENCES HSPSYS_APPLICATION , CLUSTER_ID INTEGER NOT NULL, CONSTRAINT FK_HSPCS_CLID FOREIGN KEY(CLUSTER_ID) REFERENCES HSPSYS_CLUSTER, CONSTRAINT PK_APP_CLSTR_DTL PRIMARY KEY(CLUSTER_ID, APP_ID) ); CREATE TABLE HSPSYS_PROPERTIES ( PROPERTY_ID INTEGER NOT NULL, OBJECT_ID INTEGER NOT NULL, PROPERTY_NAME VARCHAR(255) NOT NULL, PROPERTY_VALUE VARCHAR(255), CONSTRAINT PK_HSPPROP PRIMARY KEY(PROPERTY_ID, OBJECT_ID, PROPERTY_NAME) ); CREATE TABLE HSPSYS_PI_INFO ( XML_FILE NTEXT NOT NULL ); commit
(Dec 11, 2008, 04:50:32 PM), com.hyperion.planning.PIRegistrationPanelManager, ERROR, Exception :Error while retreiving xml file from database.
Thanks for any help.After spending 2+ hrs with Hyperion Support nothing got resolved.. Just to give more background on this problem, we originally reconfigured all Hyperion components to use different SQL server, that is when the problem started happening as soon as we got to Planning Instance Configuration. Could this be the situations when old server name is still somewhere in the system?.. Could this be Shared Services problem.
Here is another quote from SharedServices_Security.log
2008-12-12 15:08:48,249 [http-58080-Processor1] WARN com.hyperion.css.spi.impl.nv.NativeProvider.getHierarchicalRoleTree(Unknown Source) - Exception getting Child Roles in hierarchy due to Illegal or invalid id.dflt passed in. Please check the argument.
2008-12-12 15:31:18,121 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
2008-12-12 15:31:29,808 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 1016
2008-12-12 15:31:30,823 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2008-12-12 15:31:41,229 [http-58080-Processor4] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:31:41,229 [http-58080-Processor4] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2008-12-12 15:38:01,938 [main] WARN com.hyperion.css.common.configuration.CSSConfigurationImplXML.<init>(Unknown Source) - Skipping the validation of the configuration because the required validating parser library not found or errors in validation. This does not guarantee the proper initialization of the component.
2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.resolveCircularDependency(Unknown Source) - INFO: Time to resolve circular dependency on the Cache for provider: DIPORTAL is : 0
2008-12-12 15:38:13,454 [Thread-8] WARN com.hyperion.css.spi.impl.msad.MSADCacheUpdater.refreshProviderCache(Unknown Source) - INFO: Time to build Cache for provider: DIPORTAL in millis is : 813
2008-12-12 15:38:35,453 [main] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /F:/Hyperion/deployments/Tomcat5/SharedServices9/config/CSS.xml.
2008-12-12 15:42:09,776 [http-58080-Processor3] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:42:09,776 [http-58080-Processor3] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null.
2008-12-12 15:42:09,776 [http-58080-Processor2] ERROR com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - Unable to get CSS.xml file or the file may be read only
2008-12-12 15:42:09,776 [http-58080-Processor2] WARN com.hyperion.css.CSSAPIImpl.initialize(Unknown Source) - The system has already been configured; skipping attempt to configure the system again with the new config file /null. -
Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide SolutionHi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change................. -
Product Instance Registration Error: "System Failure: Error while retrieving xml file from database"
Hi S9 installation Gurus,
Please try to resolve this long awaited issue with Planning installation as this is purely configuration related issue.
Detail of Problem:-
After Susessful configuration of
1) Foundation Services (Hyperion Shared Services)
2) Essbase administration services
3) Essbase Server
4) Hyperion reporting and analysis
5) Planning -----> Product options, Register with shared services, configure database, deploy to application server (Appache)
Error Point: when i tick ckeck box in front of Product instance registration
click next
create instance
click next
instance name-Plan1
Web tier host name: my machine name (neeraj-pc, as i installed locally all component of hyperion)
server port: 8300 (system suggesting)
tick on active instance
click next
Error Pop Up "System Failure: Error while retrieving xml file from database"
Details of PlanningSystemDB (file :- \Hyperion\common\config\PlanningSystemDB.properties)
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=puser
SYSTEM_DB_PASSWORD=GGAKFJ
SYSTEM_DB_CATALOG=p1db
SYSTEM_DB_TYPE=SQL
INSTANCE=
Note: puser (SQL Authenticated user)
Thanks
Kumar
Edited by: user10385300 on Dec 4, 2008 5:44 AMThis has been resolved at :- Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"
Cheers
John
http://john-goodwin.blogspot.com/ -
System Failure:-Error while retreiving xml file from database
I install Planning 9.3.1 at Windows2003 server SP1 and MS SQL 2000 SP3A. In Hyperion Planning Instance Registration I take "System Failure:-Error while retreiving xml file from database" error in Configuration .
Please help
ThanksI also have the same error. Win2000 Server and MS SQL 2005.
Maybe someone made request for official information from Oracle about this issue?
I'd like to change MS SQL to Oracle 10g, I hope this can helps (if reason in RDBMS). But if reason in logic of scripts... I dont't know... -
File from the Application server
Hi gurus,
I am working on a scenario where I need to get a file from the application server and for this I need to ask user to enter the location and that too at the selection screen and then I need to read this location using open data set and read data set in my program , once I am done with this I need to do some other validations. so can you please help me out how to achieve this.
Thanks
Rajeev GuptaHi
Declare the selection screen with file as parameter so that the user enter the application server file..
the use the OPEND DATASET as mentioned in below code and process
Refer this:
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3ca6358411d1829f0000e829fbfe/frameset.htm
ABAP code for uploading a TAB delimited file into an internal table. See code below for structures.
*& Report ZUPLOADTAB * &----
*& Example of Uploading tab delimited file *
REPORT zuploadtab .
PARAMETERS: p_infile LIKE rlgrap-filename
OBLIGATORY DEFAULT '/usr/sap/'..
DATA: ld_file LIKE rlgrap-filename.
*Internal tabe to store upload data
TYPES: BEGIN OF t_record,
name1 like pa0002-VORNA,
name2 like pa0002-name2,
age type i,
END OF t_record.
DATA: it_record TYPE STANDARD TABLE OF t_record INITIAL SIZE 0,
wa_record TYPE t_record.
*Text version of data table
TYPES: begin of t_uploadtxt,
name1(10) type c,
name2(15) type c,
age(5) type c,
end of t_uploadtxt.
DATA: wa_uploadtxt TYPE t_uploadtxt.
*String value to data in initially.
DATA: wa_string(255) type c.
constants: con_tab TYPE x VALUE '09'.
*If you have Unicode check active in program attributes then you will
*need to declare constants as follows:
*class cl_abap_char_utilities definition load.
*constants:
con_tab type c value cl_abap_char_utilities=>HORIZONTAL_TAB.
*START-OF-SELECTION
START-OF-SELECTION.
ld_file = p_infile.
OPEN DATASET ld_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
ELSE.
DO.
CLEAR: wa_string, wa_uploadtxt.
READ DATASET ld_file INTO wa_string.
IF sy-subrc NE 0.
EXIT.
ELSE.
SPLIT wa_string AT con_tab INTO wa_uploadtxt-name1
wa_uploadtxt-name2
wa_uploadtxt-age.
MOVE-CORRESPONDING wa_uploadtxt TO wa_upload.
APPEND wa_upload TO it_record.
ENDIF.
ENDDO.
CLOSE DATASET ld_file.
ENDIF.
*END-OF-SELECTION
END-OF-SELECTION.
*!! Text data is now contained within the internal table IT_RECORD
Display report data for illustration purposes
loop at it_record into wa_record.
write:/ sy-vline,
(10) wa_record-name1, sy-vline,
(10) wa_record-name2, sy-vline,
(10) wa_record-age, sy-vline.
endloop.
Regards
Anji -
Upload tab-delimited file from the application server to an internal table
Hello SAPients.
I'm using OPEN DATASET..., READ DATASET..., CLOSE DATASET to upload a file from the application server (SunOS). I'm working with SAP 4.6C. I'm trying to upload a tab-delimited file to an internal table but when I try load it the fields are not correctly separated, in fact, they are all misplaced and the table shows '#' where supposedly there was a tab.
I tried to SPLIT the line using as separator a variable with reference to CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB but for some reason that class doesn't exist in my system.
Do you know what I'm doing wrong? or Do you know a better method to upload a tab-delimited file into an internal table?
Thank you in advance for your help.Try:
REPORT ztest MESSAGE-ID 00.
PARAMETER: p_file LIKE rlgrap-filename OBLIGATORY.
DATA: BEGIN OF data_tab OCCURS 0,
data(4096),
END OF data_tab.
DATA: BEGIN OF vendor_file_x OCCURS 0.
* LFA1 Data
DATA: mandt LIKE bgr00-mandt,
lifnr LIKE blf00-lifnr,
anred LIKE blfa1-anred,
bahns LIKE blfa1-bahns,
bbbnr LIKE blfa1-bbbnr,
bbsnr LIKE blfa1-bbsnr,
begru LIKE blfa1-begru,
brsch LIKE blfa1-brsch,
bubkz LIKE blfa1-bubkz,
datlt LIKE blfa1-datlt,
dtams LIKE blfa1-dtams,
dtaws LIKE blfa1-dtaws,
erdat LIKE lfa1-erdat,
ernam LIKE lfa1-ernam,
esrnr LIKE blfa1-esrnr,
konzs LIKE blfa1-konzs,
ktokk LIKE lfa1-ktokk,
kunnr LIKE blfa1-kunnr,
land1 LIKE blfa1-land1,
lnrza LIKE blfa1-lnrza,
loevm LIKE blfa1-loevm,
name1 LIKE blfa1-name1,
name2 LIKE blfa1-name2,
name3 LIKE blfa1-name3,
name4 LIKE blfa1-name4,
ort01 LIKE blfa1-ort01,
ort02 LIKE blfa1-ort02,
pfach LIKE blfa1-pfach,
pstl2 LIKE blfa1-pstl2,
pstlz LIKE blfa1-pstlz,
regio LIKE blfa1-regio,
sortl LIKE blfa1-sortl,
sperr LIKE blfa1-sperr,
sperm LIKE blfa1-sperm,
spras LIKE blfa1-spras,
stcd1 LIKE blfa1-stcd1,
stcd2 LIKE blfa1-stcd2,
stkza LIKE blfa1-stkza,
stkzu LIKE blfa1-stkzu,
stras LIKE blfa1-stras,
telbx LIKE blfa1-telbx,
telf1 LIKE blfa1-telf1,
telf2 LIKE blfa1-telf2,
telfx LIKE blfa1-telfx,
teltx LIKE blfa1-teltx,
telx1 LIKE blfa1-telx1,
xcpdk LIKE lfa1-xcpdk,
xzemp LIKE blfa1-xzemp,
vbund LIKE blfa1-vbund,
fiskn LIKE blfa1-fiskn,
stceg LIKE blfa1-stceg,
stkzn LIKE blfa1-stkzn,
sperq LIKE blfa1-sperq,
adrnr LIKE lfa1-adrnr,
mcod1 LIKE lfa1-mcod1,
mcod2 LIKE lfa1-mcod2,
mcod3 LIKE lfa1-mcod3,
gbort LIKE blfa1-gbort,
gbdat LIKE blfa1-gbdat,
sexkz LIKE blfa1-sexkz,
kraus LIKE blfa1-kraus,
revdb LIKE blfa1-revdb,
qssys LIKE blfa1-qssys,
ktock LIKE blfa1-ktock,
pfort LIKE blfa1-pfort,
werks LIKE blfa1-werks,
ltsna LIKE blfa1-ltsna,
werkr LIKE blfa1-werkr,
plkal LIKE lfa1-plkal,
duefl LIKE lfa1-duefl,
txjcd LIKE blfa1-txjcd,
sperz LIKE lfa1-sperz,
scacd LIKE blfa1-scacd,
sfrgr LIKE blfa1-sfrgr,
lzone LIKE blfa1-lzone,
xlfza LIKE lfa1-xlfza,
dlgrp LIKE blfa1-dlgrp,
fityp LIKE blfa1-fityp,
stcdt LIKE blfa1-stcdt,
regss LIKE blfa1-regss,
actss LIKE blfa1-actss,
stcd3 LIKE blfa1-stcd3,
stcd4 LIKE blfa1-stcd4,
ipisp LIKE blfa1-ipisp,
taxbs LIKE blfa1-taxbs,
profs LIKE blfa1-profs,
stgdl LIKE blfa1-stgdl,
emnfr LIKE blfa1-emnfr,
lfurl LIKE blfa1-lfurl,
j_1kfrepre LIKE blfa1-j_1kfrepre,
j_1kftbus LIKE blfa1-j_1kftbus,
j_1kftind LIKE blfa1-j_1kftind,
confs LIKE lfa1-confs,
updat LIKE lfa1-updat,
uptim LIKE lfa1-uptim,
nodel LIKE blfa1-nodel.
DATA: END OF vendor_file_x.
FIELD-SYMBOLS: <field>,
<field_1>.
DATA: delim TYPE x VALUE '09'.
DATA: fld_chk(4096),
last_char,
quote_1 TYPE i,
quote_2 TYPE i,
fld_lth TYPE i,
columns TYPE i,
field_end TYPE i,
outp_rec TYPE i,
extras(3) TYPE c VALUE '.,"',
mixed_no(14) TYPE c VALUE '1234567890-.,"'.
OPEN DATASET p_file FOR INPUT.
DO.
READ DATASET p_file INTO data_tab-data.
IF sy-subrc = 0.
APPEND data_tab.
ELSE.
EXIT.
ENDIF.
ENDDO.
* count columns in output structure
DO.
ASSIGN COMPONENT sy-index OF STRUCTURE vendor_file_x TO <field>.
IF sy-subrc <> 0.
EXIT.
ENDIF.
columns = sy-index.
ENDDO.
* Assign elements of input file to internal table
CLEAR vendor_file_x.
IF columns > 0.
LOOP AT data_tab.
DO columns TIMES.
ASSIGN space TO <field>.
ASSIGN space TO <field_1>.
ASSIGN COMPONENT sy-index OF STRUCTURE vendor_file_x TO <field>.
SEARCH data_tab-data FOR delim.
IF sy-fdpos > 0.
field_end = sy-fdpos + 1.
ASSIGN data_tab-data(sy-fdpos) TO <field_1>.
* Check that numeric fields don't contain any embedded " or ,
IF <field_1> CO mixed_no AND
<field_1> CA extras.
TRANSLATE <field_1> USING '" , '.
CONDENSE <field_1> NO-GAPS.
ENDIF.
* If first and last characters are '"', remove both.
fld_chk = <field_1>.
IF NOT fld_chk IS INITIAL.
fld_lth = strlen( fld_chk ) - 1.
MOVE fld_chk+fld_lth(1) TO last_char.
IF fld_chk(1) = '"' AND
last_char = '"'.
MOVE space TO fld_chk+fld_lth(1).
SHIFT fld_chk.
MOVE fld_chk TO <field_1>.
ENDIF. " for if fld_chk(1)=" & last_char="
ENDIF. " for if not fld_chk is initial
* Replace "" with "
DO.
IF fld_chk CS '""'.
quote_1 = sy-fdpos.
quote_2 = sy-fdpos + 1.
MOVE fld_chk+quote_2 TO fld_chk+quote_1.
ELSE.
MOVE fld_chk TO <field_1>.
EXIT.
ENDIF.
ENDDO.
<field> = <field_1>.
ELSE.
field_end = 1.
ENDIF.
SHIFT data_tab-data LEFT BY field_end PLACES.
ENDDO.
APPEND vendor_file_x.
CLEAR vendor_file_x.
ENDLOOP.
ENDIF.
CLEAR data_tab.
REFRESH data_tab.
FREE data_tab.
Rob -
Not able to open XML file in the application server..........
Hi,
I have downloaded a XML file to the application server.....
File is created but i am not able to open the file there....
Plz advice ....how to open it.....
Regards.Use Notepad. Drag and drop in notepad.
Aman -
Error while generating XML file from rdf report.
Hi All,
we are having a rdf report that displays images retrieved from data base. I need to convert this report to xml report(using rtf template).
when i tried to run the report after changing the output of the concurrent program to "XML", i am getting the below error.
REP-1295: Data format of column 'PK1_VALUE' is unsupported.
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1295: Data format of column 'PK1_VALUE' is unsupported.
images are stored in BLOB type columns.
Can anyone help me on this..
thanks
gtungalaHi Hussein,
Thank you for the reply.. i was sure that i will get correct response with in a day..
you people made this as one of the best technical forums..no doubt in that..
need some more help from you...!
The metalink docs say that it is not possible to generate xml file as the image is BLOB.
Can you please tell me any solution for developing xml template(rtf) which can display images that are stored in data base BLOB columns. Even PL/SQL script will do.. I have tried with changing the BLOB to CLOB in rdf query(by calling a function that converts BLOB to CLOB). it didnt help.
thanks in advance..
gtungala -
XML file in the Application server
Hi all
I am transferring the XML data in to application server but it is not transferring complete data .
why it is not transferring complete data please tell me.
Points will be rewarded .
Thanks.
Prasad.tables: t005s,
a911 ,
konp .
data: begin of it_t005u occurs 0,
bland like t005u-bland,
bezei like t005u-bezei,
end of it_t005u .
data: begin of it_a911 occurs 0,
regio like a911-regio,
knumh like a911-knumh,
end of it_a911 .
data: begin of it_konp occurs 0,
knumh like konp-knumh,
kbetr like konp-kbetr,
end of it_konp .
data: begin of it_download occurs 0,
string(54),
end of it_download.
data: it_textno like zdms_textno occurs 0,
wa_textno like line of it_textno .
data : gv_filenum like zdms_textno-filenumber ,
gv_filenumc(10) type c .
data: gv_file1 type string.
data: f1(2),
f2(2),
f3(2),
gv_vat_app(1),
gv_kbetr(12) .
*********Start of Inserted by Durai.V 26-May-2008 *****
data : w_app_ser_nme type msxxlist-name value 'r3prod_EEP_05'.
data : lv_flag_con type c.
data : it_download_app_ser like dxrawdata occurs 0.
*********End of Insert by Durai.V 26-May-2008 *********
start-of-selection.
select bland
bezei
into table it_t005u
from t005u
where spras eq 'EN'
and land1 eq 'IN'.
if not it_t005u[] is initial.
select regio
knumh
into table it_a911
from a911
for all entries in it_t005u
where kschl eq 'JIVP'
and regio eq it_t005u-bland
and taxk1 eq '1'
and taxm1 eq 'A'
and datbi ge sy-datum
and datab le sy-datum .
endif.
if not it_a911[] is initial.
select knumh
kbetr
into table it_konp
from konp
for all entries in it_a911
where knumh eq it_a911-knumh.
endif.
it_download-string = 'STATE' .
append it_download .
clear it_download .
it_download-string = '{' .
append it_download .
clear it_download .
loop at it_t005u.
clear: it_a911,
it_konp,
gv_vat_app,
gv_kbetr.
read table it_a911 with key regio = it_t005u-bland.
if sy-subrc = 0.
read table it_konp with key knumh = it_a911-knumh.
if sy-subrc = 0.
gv_vat_app = 'Y' .
else.
gv_vat_app = 'N' .
endif.
endif.
if ( it_t005u-bland ne '' ).
gv_kbetr = it_konp-kbetr / 10 .
if it_t005u-bezei eq ''.
f1 = ' ~'.
else.
f1 = '~'.
endif.
if gv_vat_app eq ''.
f2 = ' ~'.
else.
f2 = '~'.
endif.
if gv_kbetr eq ''.
f3 = ' ~'.
else.
f3 = '~'.
endif.
concatenate 'STATE'
'~'
'001'
'~'
it_t005u-bland
'~'
it_t005u-bezei
f1
gv_vat_app
f2
gv_kbetr
f3
into it_download-string.
append it_download .
clear it_download .
endif.
endloop.
if sy-subrc = 0.
lv_flag_con = 'X'.
endif.
it_download-string = '}' .
append it_download .
clear it_download .
clear: gv_filenum ,
gv_filenumc,
gv_file1 ,
wa_textno .
select single filenumber
from zdms_textno
into gv_filenum
where filename eq 'DMS_' .
move gv_filenum to gv_filenumc .
shift gv_filenumc left deleting leading '0'.
if gv_filenum < 10 .
concatenate '0' gv_filenumc into gv_filenumc .
endif.
concatenate 'DMS_'
gv_filenumc
'.txt'
into gv_file1 .
*Downloading the file to Application Server**
Start of Commented by Durai.V 26-May-2008 **********
*open dataset gv_file1 for output in text mode ENCODING DEFAULT .
loop at it_download.
transfer it_download-string to gv_file1.
endloop.
*close dataset gv_file1.
End of Commented by Durai.V 26-May-2008 ************
*********Start of Inserted by Durai.V 26-May-2008 *********
data : lv_serv_file_pth type dxfile-filename.
lv_serv_file_pth = gv_file1.
it_download_app_ser[] = it_download[].
if it_download_app_ser[] is not initial and lv_flag_con = 'X'.
call function 'DX_FILE_WRITE'
exporting
filename = lv_serv_file_pth
server = w_app_ser_nme
pc = ''
tables
data_tab = it_download_app_ser[]
exceptions
no_file_on_server = 1
no_data_on_server = 2
gui_download_failed = 3
no_authority = 4
others = 5.
*********End of Inserted by Durai.V 26-May-2008 ***********
if sy-subrc = 0.
wa_textno-filename = 'DMS_' .
wa_textno-filenumber = gv_filenum + 1 .
modify zdms_textno from wa_textno .
endif.
else.
write / 'No Data Selected, So file not created in Appllcation Server'.
endif.
check this report ........it is doing the same
reward IF...................
Regards
Anbu -
Moving of flat file from the application server after upload.
Hi All,
I am uploading data from a flat file placed on the application server by a BDC program.
After the BDC has created the session i want to transfer the flat file from that folder to another folder on the application server by changing the name of the flatfile.
Can any one suggest the best way of doing this particular scenario?
Thanks in advance.
Regards
Satish Nair.Here is a sample program.
report zrich_0001.
data: d1 type localfile value '/usr/sap/TST/SYS/Data1.txt',
d2 type localfile value '/usr/sap/TST/SYS/Data2.txt'.
data: begin of itab occurs 0,
rec(20) type c,
end of itab.
data: wa(20) type c.
start-of-selection.
open dataset d1 for input in text mode.
if sy-subrc = 0.
do.
read dataset d1 into wa.
if sy-subrc <> 0.
exit.
endif.
itab-rec = wa.
append itab.
enddo.
endif.
close dataset d1.
open dataset d2 for output in text mode.
loop at itab.
transfer itab to d2.
endloop.
close dataset d2.
delete dataset d1.
Regards,
Rich Heilman -
How to delete File from the Application Server,ABAP
Hi Gurus,
I'm using DELETE DATASET Statement ,
Based on Date how can i delete files with in the period in the Application server
Any BAPI/FM for this Delete file based on some Date Period
Thanks in Advance.DATA: BEGIN OF file,
dirname(75) TYPE c, " name of directory. (possibly truncated.)
name(75) TYPE c, " name of entry. (possibly truncated.)
type(10) TYPE c, " type of entry.
len(8) TYPE p, " length in bytes.
owner(8) TYPE c, " owner of the entry.
mtime(6) TYPE p, " last modification date, seconds since 1970
mode(9) TYPE c, " like "rwx-r-x--x": protection mode.
useable(1) TYPE c,
subrc(4) TYPE c,
errno(3) TYPE c,
errmsg(40) TYPE c,
mod_date TYPE d,
mod_time(8) TYPE c, " hh:mm:ss
seen(1) TYPE c,
changed(1) TYPE c,
END OF file.
DATA: BEGIN OF file_list OCCURS 100,
dirname(75) TYPE c, " name of directory. (possibly truncated.)
name(75) TYPE c, " name of entry. (possibly truncated.)
type(10) TYPE c, " type of entry.
len(8) TYPE p, " length in bytes.
owner(8) TYPE c, " owner of the entry.
mtime(6) TYPE p, " last modification date, seconds since 1970
mode(9) TYPE c, " like "rwx-r-x--x": protection mode.
useable(1) TYPE c,
subrc(4) TYPE c,
errno(3) TYPE c,
errmsg(40) TYPE c,
mod_date TYPE d,
mod_time(8) TYPE c, " hh:mm:ss
seen(1) TYPE c,
changed(1) TYPE c,
END OF file_list.
DO.
CLEAR file.
CALL 'C_DIR_READ_NEXT'
ID 'TYPE' FIELD file-type
ID 'NAME' FIELD file-name
ID 'LEN' FIELD file-len
ID 'OWNER' FIELD file-owner
ID 'MTIME' FIELD file-mtime
ID 'MODE' FIELD file-mode
ID 'ERRNO' FIELD file-errno
ID 'ERRMSG' FIELD file-errmsg.
if sy-subrc eq 0.
MOVE-CORRESPONDING file TO file_list.
APPEND file_list.
else.
exit.
endif.
enddo.
sort file_list based on date and time ie, MOD_DATE and MOD_TIME fields
and delete the entries -
PL/SQL: numeric or value error when extracting xml file from tables.
create or replace FUNCTION proc_generate_xml_from_tables(p_directory in varchar2,
p_areaname in varchar2)
return integer
AS
qryCtx DBMS_XMLGEN.ctxHandle;
result CLOB;
clob_len number := 0;
file_ptr utl_file.file_type;
oTableName restore_metadata.table_name%type;
o_filename restore_metadata.table_name%type;
cursor metadata_restore_list(p_area varchar2) is
select * from restore_metadata
where instr(area_name,upper(p_Area)) > 0
order by degree;
vtabcount number := 0;
sql_stmt varchar2(300);
BEGIN
dbms_lob.createtemporary(result, true,dbms_lob.session);
oTableName := upper('MAINT_ACTVS');
vtabcount := 0;
sql_stmt := 'select count(*) from ' || oTableName;
execute immediate sql_stmt into vtabcount;
o_filename := oTableName || '.xml';
file_ptr := utl_file.fopen(p_directory,o_filename,'W');
dbms_output.put_line(oTableName);
qryCtx := dbms_xmlgen.newcontext('select * from ' || oTableName);
result := dbms_xmlgen.getxml(qryCtx);
--dbms_output.put_line(result);
clob_len := dbms_lob.getlength(result);
dbms_output.put_line('Length of the clob file' || clob_len);
utl_file.put_line(file_ptr,result);
utl_file.fclose(file_ptr);
dbms_xmlgen.closeContext(qryCtx);
dbms_lob.freetemporary(result);
return 0;
EXCEPTION
when others THEN
utl_file.fclose(file_ptr);
dbms_output.put_line('Table Name into Consideration :- ' || oTableName);
dbms_output.put_line('Oracle Error Number:- ' || sqlcode || ' Ora Message :- ' || sqlerrm);
return -1;
END;
I am getting the following errors..
SQL> @temp1.sql
MAINT_ACTVS
Length of the clob file34245
Table Name into Consideration :- MAINT_ACTVS
Oracle Error Number:- -6502 Ora Message :- ORA-06502: PL/SQL: numeric or value error
What am I doing wrong here?
DB version is Oracle 10g
Edited by: userAtoZ on May 6, 2011 2:55 PM>
My problem lies that my xml file is having data more than 32 K.
When I write it 32K at a time then it work fine.
>
Then break it down.
l_pos number;
WHILE (l_pos <= clob_len)
LOOP
UTL_FILE.PUT_LINE (file_ptr,DBMS_LOB.SUBSTR ( RESULT , 32767,l_pos));
l_pos := l_pos + 32767;
END LOOP;
utl_file.fclose(file_ptr);
-
Error while import XML file from Production to Dev., But has GREEN status
Hi,
I tried to export/import bex queries through XML transportation. Transportation is being done from Production system to Development. In transport connection I selected required query and then I exported to Development. export of file is done successfully.
Now in development system I imported that XML file. It is imported. Giving GREEN symbol and also with GREEN check. But in Log view I found ERRORS. in errors it is mentioned "SAP object 46N3K1OCT22PSBN46O95MQLTJ () cannot be imported". along with long message text "Install the specified objects from Business Content. Only import the metadata afterwards.".
What should I do now as of next step... import of file is stuck..
How can I search object 46N3K1OCT22PSBN46O95MQLTJ (), if I have to install from BC.
I am also unable to find the query in Development Bex analyser.
Thanks for help....
[email protected]Hi Babloo,
According to the error message, the package may have failed are as follows:
The user account that is used to run the package under SQL Server Agent in PRODUCTION server differs from the original package author.
The user account does not have the required permissions to make connections or to access resources outside the SSIS package.
The package may not run in the following scenarios:
The current user cannot decrypt secrets from the package. This scenario can occur if the current account or the execution account differs from the original package author, and the package's ProtectionLevel property setting does not let the current user
decrypt secrets in the package. In this scenario, we can change the SSIS Package ProtectionLevel property to EncryptSensitiveWithPassword, then modify the SQL Server Agent job step command line to include this password.
File access fails because the current user does not have the required permissions to write to the file share that the connection manager accesses. In this scenario, we can create a SQL Server Agent proxy account. This proxy account must use a credential
that lets SQL Server Agent run the job as the account that created the package or as an account that has the required permissions.
References:
SSIS package does not run when called from a SQL Server Agent job step
Run an SSIS Package Under a Different Account
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
How to select all files from the application server.
Hi all,
I have a requirement to select all files with the same file format I.e i have created no of files with same name but different time stamps addition , now i want to select all the fiels and read the data into an internal table and sort them on the user requirement, I am using FM -
/SAPDMC/LSM_F4_SERVER_FILE to get single file name, i should also give the option on the selection screen for the user to select the file range I.e form which to which the sorting should be done.
could anybody suggest me the function module which selects all the file names .
Regards,
Sre.
Edited by: Alvaro Tejada Galindo on Mar 10, 2008 4:49 PMHi,
PARAMETER: p_fdir type pfeflnamel DEFAULT '/usr/sap/tmp'.
data: begin of it_filedir occurs 10.
include structure salfldir.
data: end of it_filedir.
*START-OF-SELECTION
START-OF-SELECTION.
Get Current Directory Listing for OUT Dir
call function 'RZL_READ_DIR_LOCAL'
exporting
name = p_fdir
tables
file_tbl = it_filedir.
List of files are contained within table it_filedir
loop at it_filedir.
write: / it_filedir-NAME.
endloop.
Regards,
Omkaram.
Maybe you are looking for
-
How can I adjust the safari sound volume other than the usual settings in the system preferences? I am using an apple mac air, updated with OS X Yosemite. Looking at the same web site video from two different users accounts on the same computer, t
-
No sound or recording in windows 8.1 on parallels 9 OS 10.9.2
I really hope someone can help me here. I have a MacBook air 13" (purchased new in 2014), running Mavericks Mac OS 10.9.2, parallels desktop 9, build 9.0 24229 and windows 8.1, all installed in march 2014. built in microphone and speakers on macbook
-
Mac Mini - Bootcamp; without CD Drive?
how do I install windows 7, through bootcamp, on my Mac Mini without a USB DVD drive. I've recieved an ISO file from Microsoft with Win7 on so would like to use bootcamp to mount this onto a partition. Help?
-
My iPhone 5 is not allowing updating to the newest iOS version 6.1.3.
My iPhone 5 is not allowing updating to the newest iOS version 6.1.3. I missed doing the 6.1.2 update before 6.1.3 was available. It wants to install the 6.1.2 update, but, once I agree to the terms it tells me I can't because I am not connected to
-
I have a table that has some project info in it. what is the best way to track when changes are made ? Here is an example. create table testing1 ( projectid varchar2(50), value1 varchar2(50), value_date date insert into testing1 (projectid,value1)val