Error while fetching data from CRM system to BW
I am extracting data (BP ID) from CRM system. I have upgraded the BI 7.0 system from patch 12 to patch 14. After upgrading when i execute the infopackage to fetch the data from the CRM system. The request is coming in yellow and is not fetching the data. Can you suggest what could be the solution.. or where can i find some help..
Thanks..
Bhavya
Hi,
1 . Do the Data replication in source system
2. Check the source system connections.
3. Check the Infopackage status and also che the exact error from tcode RSMO.
Regards,
Srini Nookala
Similar Messages
-
Fatal error while fetching data from bi
hi,
i am getting following error while fetching data from bi using select statement
i have written code in this way
SELECT [Measures].[D2GFTNHIOMI7KWV99SD7GPLTU] ON COLUMNS, NON EMPTY { [DEM_STATE].MEMBERS} ON ROWS FROM DEM_CUBE/TEST_F_8
error description when i click on test
Fatal Error
com.lighthammer.webservice.SoapException: The XML for Analysis provider encountered an errorthanks for answering .but when i tried writing the statement in transaction 'MDXTEST' and clicked on check i am getting following error
Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Message no. BRAINOLAPAPI011
Diagnosis
Failed to start the MDX parser.
System Response
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Procedure
Check the Sys Log in Transaction SM21 and test the TCP-IP connection MDX_PARSER in Transaction SM59.
SO I WENT IN SM 59 TO CHECK THE CONNECTION.
CAN U TELL ME WHAT CONFIGERATION I NEED TO DO FOR MAKING SELECT STATEMENTS WORK? -
Error while extracting data from CRM
Dear all,
I have used some standard and generic datasources to extract data from CRM. These were working fine for more than a year and are scheduled in Process chains. For the past few days I am getting Caller 09 error as shown below, only for the generic datasources. I have checked the connection,replicated the datasources and activated them, reinitialized and have tried all the solutions that were posted earlier, but still the process chain fails. When I execute the process chain for generic datasources manually, it is working fine.
When I tried in RSA3 for both standard and generic datasources in CRM with update mode D, I get a message 'Error occured during the extraction',
Kindly suggest what can be the problem.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Thanks all in advance.
Regards
Adhira AnandHi Meyappan,
I have checked SM37, SM21 and ST22. There are no errors.
in SM37 the below log is displayed.
Job started
Step 001 started (program SBIE0001, variant &0000000005420, user ID ALEREMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = ZCRM_SRV_DEFECT
RLOGSYS = CLNT645BIP
REQUNR = REQU_4JHQ8HH6KA40JHC1TYLYIV2W2
UPDMODE = D
LANGUAGES = *
Current Values for Selected Profile Parameters *
abap/heap_area_nondia......... 2000000000 *
abap/heap_area_total.......... 2000000000 *
abap/heaplimit................ 40000000 *
zcsa/installed_languages...... DE *
zcsa/system_language.......... E *
ztta/max_memreq_MB............ 2047 *
ztta/roll_area................ 6500000 *
ztta/roll_extension........... 2000000000 *
1 LUWs confirmed and 1 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
IDOC: Info IDoc 2, IDoc No. 101415, Duration 00:00:00
IDoc: Start = 13.10.2010 22:51:39, End = 13.10.2010 22:51:39
Synchronized transmission of info IDoc 3 (0 parallel tasks)
IDOC: Info IDoc 3, IDoc No. 101416, Duration 00:00:00
IDoc: Start = 13.10.2010 22:51:42, End = 13.10.2010 22:51:42
Job finished -
Error while fetching data from OWB Client using External Table.
Dear All,
I am using Oracle Warehouse Builder 11g & Oracle 10gR2 as repository database on Windows 2000 Server.
I facing some issue in fetching data from a Flat File using external table from OWB Client.
I have perform all the steps without any error but when I try to view the data, I got the following error.
======================================
RA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04040: file expense_categories.csv in SOURCE_LOCATION not found
ORA-06512: at "SYS.ORACLE_LOADER", line 19
java.sql.SQLException: ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04040: file expense_categories.csv in SOURCE_LOCATION not found
ORA-06512: at "SYS.ORACLE_LOADER", line 19
at oracle.jdbc.driver.SQLStateMapping.newSQLException(SQLStateMapping.java:70)
at oracle.jdbc.driver.DatabaseError.newSQLException(DatabaseError.java:110)
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:171)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:455)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:413)
at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:1030)
at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:183)
at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:774)
at oracle.jdbc.driver.T4CStatement.executeMaybeDescribe(T4CStatement.java:849)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1186)
at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1377)
at oracle.jdbc.driver.OracleStatementWrapper.executeQuery(OracleStatementWrapper.java:386)
at oracle.wh.ui.owbcommon.QueryResult.<init>(QueryResult.java:18)
at oracle.wh.ui.owbcommon.dataviewer.relational.OracleQueryResult.<init>(OracleDVTableModel.java:48)
at oracle.wh.ui.owbcommon.dataviewer.relational.OracleDVTableModel.doFetch(OracleDVTableModel.java:20)
at oracle.wh.ui.owbcommon.dataviewer.RDVTableModel.fetch(RDVTableModel.java:46)
at oracle.wh.ui.owbcommon.dataviewer.BaseDataViewerPanel$1.actionPerformed(BaseDataViewerPanel.java:218)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
at javax.swing.AbstractButton.doClick(AbstractButton.java:282)
at oracle.wh.ui.owbcommon.dataviewer.BaseDataViewerPanel.executeQuery(BaseDataViewerPanel.java:493)
at oracle.wh.ui.owbcommon.dataviewer.BaseDataViewerEditor.init(BaseDataViewerEditor.java:116)
at oracle.wh.ui.owbcommon.dataviewer.BaseDataViewerEditor.<init>(BaseDataViewerEditor.java:58)
at oracle.wh.ui.owbcommon.dataviewer.relational.DataViewerEditor.<init>(DataViewerEditor.java:16)
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
at oracle.wh.ui.owbcommon.IdeUtils._tryLaunchEditorByClass(IdeUtils.java:1412)
at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1349)
at oracle.wh.ui.owbcommon.IdeUtils._doLaunchEditor(IdeUtils.java:1367)
at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:869)
at oracle.wh.ui.owbcommon.IdeUtils.showDataViewer(IdeUtils.java:856)
at oracle.wh.ui.console.commands.DataViewerCmd.performAction(DataViewerCmd.java:19)
at oracle.wh.ui.console.commands.TreeMenuHandler$1.run(TreeMenuHandler.java:188)
at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
===========================
In the error it is showing that file expense_categories.csv in SOURCE_LOCATION not found but I am 100% sure that file is very much there.
Is anybody face the same issue?
Do we need to configure something before loading data from a flat file from OWB Client?
Any help would higly appreciable.
Regards,
Manmohan SharmaHi Detlef / Gowtham,
Now I am able to fetch data from flat files from OWB Server as well as OWB Client.
One way I have achieved as suggested by you
1) Creating location on the OWB Client
2) Samples the files at client
3) Created & Configured external table
4) Copy all flat files on OWB Server
5) Updated the location which I created at the client.
Other way
1) Creating location on the OWB Client
2) Samples the files at client
3) Created & Configured external table
4) Copied flat files on the sever in same drive & directory . like if my all flat files are on C:\data at OWB Client then I copied flat file C:\data on the OWB Server. But this is feasible for Non-Windows.
Hence my problem solved.
Thanks a lot.
Regards,
Manmohan -
Reg: Proxy error while fetching data from RFC's
Hi All,
I am fetching data from RFC's. When the data is in bulk I am getting an error like:
Proxy Error
The proxy server received an invalid response from an upstream server.
The proxy server could not handle the request POST /webdynpro/dispatcher/sap.com/pb/PageBuilder.
Reason: Error reading from remote server
When the data is samll only I am not getting any error and am able to fetch it easily. Please suggest me something in this regard.
Thanks in advance,
GauravHi Detlef / Gowtham,
Now I am able to fetch data from flat files from OWB Server as well as OWB Client.
One way I have achieved as suggested by you
1) Creating location on the OWB Client
2) Samples the files at client
3) Created & Configured external table
4) Copy all flat files on OWB Server
5) Updated the location which I created at the client.
Other way
1) Creating location on the OWB Client
2) Samples the files at client
3) Created & Configured external table
4) Copied flat files on the sever in same drive & directory . like if my all flat files are on C:\data at OWB Client then I copied flat file C:\data on the OWB Server. But this is feasible for Non-Windows.
Hence my problem solved.
Thanks a lot.
Regards,
Manmohan -
Error while extracting data from CRM to 0BPARTNER
Hi All,
We are extracting daily data from SAP CRM to 0BPARTNER using 0BPARTNER_ATTR(Delta mode) . While loading the data upto PSA, it showed the total number of records as * 50033 from 50033*. But the total and technical status are yellow . When checked the step by step analysis , *Processing error in source system reported * is red and rest all are green.When I saw the application Log it is writtern as * There is a discrepancy between confirmation and deletion of qrfc-LUWs*.
In the Details tab ,we got the following messages.
1)*Extraction (messages): Errors occurred *
19485 Records sent ( 19485 Records received ) .
2)*Transfer (IDocs and TRFC): Missing messages or warnings *
*IDoc : sent, not arrived ; Data passed to port OK * and rest every thing is green.
But all the data packets are fine.
WeI have checked using BD87, WE02, WE05 in BW and source systems for I DOCS . But none of the t-codes provide any IDOCS with warnings or errors.
So we have changed the Total l status to Green. Please note that still the technical status is showing as Yellow only.
We started to updating the data target from PSA. Now again, both statues are showing yellow only.So what should we do inorder to resolve this ?
Thanks in advance,
Babu Vasamsetti.
Edited by: babu vasamsetti on Jan 11, 2010 5:54 PM
Edited by: babu vasamsetti on Jan 11, 2010 5:55 PM
Edited by: babu vasamsetti on Jan 11, 2010 5:55 PMHi
please check sm58 in souce system side trfc may be strucked... to press f6 to run manually
first make a request a red.. in IP
hope u clear it
thx
viijender -
Error while fetching data from Logical data base
Hi All,
I need to fetch the data from Logical data base DDF.First when i am trying demo code
REPORT demo_program_read_tables_2.
NODES: spfli, sflight.
GET spfli FIELDS carrid connid cityfrom cityto.
WRITE: / spfli-carrid,
spfli-connid,
spfli-cityfrom,
spfli-cityto.
GET sflight FIELDS fldate.
WRITE: / sflight-fldate.
I am getting error like ""spfli is not a node of the logical data base __S""
Should i declare anything esle?
MadhuREPORT demo_logical_database.
DATA wa_spfli TYPE spfli.
SELECT-OPTIONS s_carr FOR wa_spfli-carrid.
DATA: callback TYPE TABLE OF ldbcb,
callback_wa LIKE LINE OF callback.
DATA: seltab TYPE TABLE OF rsparams,
seltab_wa LIKE LINE OF seltab.
callback_wa-ldbnode = 'SPFLI'.
callback_wa-get = 'X'.
callback_wa-get_late = 'X'.
callback_wa-cb_prog = sy-repid.
callback_wa-cb_form = 'CALLBACK_SPFLI'.
APPEND callback_wa TO callback.
CLEAR callback_wa.
callback_wa-ldbnode = 'SFLIGHT'.
callback_wa-get = 'X'.
callback_wa-cb_prog = sy-repid.
callback_wa-cb_form = 'CALLBACK_SFLIGHT'.
APPEND callback_wa TO callback.
seltab_wa-kind = 'S'.
seltab_wa-selname = 'CARRID'.
LOOP AT s_carr.
MOVE-CORRESPONDING s_carr TO seltab_wa.
APPEND seltab_wa TO seltab.
ENDLOOP.
CALL FUNCTION 'LDB_PROCESS'
EXPORTING
ldbname = 'F1S'
variant = ' '
TABLES
callback = callback
selections = seltab
EXCEPTIONS
ldb_not_reentrant = 1
ldb_incorrect = 2
ldb_already_running = 3
ldb_error = 4
ldb_selections_error = 5
ldb_selections_not_accepted = 6
variant_not_existent = 7
variant_obsolete = 8
variant_error = 9
free_selections_error = 10
callback_no_event = 11
callback_node_duplicate = 12
OTHERS = 13.
IF sy-subrc <> 0.
WRITE: 'Exception with SY-SUBRC', sy-subrc.
ENDIF.
FORM callback_spfli USING name TYPE ldbn-ldbnode
wa TYPE spfli
evt TYPE c
check TYPE c.
CASE evt.
WHEN 'G'.
WRITE: / wa-carrid, wa-connid, wa-cityfrom, wa-cityto.
ULINE.
WHEN 'L'.
ULINE.
ENDCASE.
ENDFORM.
FORM callback_sflight USING name TYPE ldbn-ldbnode
wa TYPE sflight
evt TYPE c
check TYPE c.
WRITE: / wa-fldate, wa-seatsocc, wa-seatsmax.
ENDFORM. -
Error while reading data from backend system.
Hi all,
When i click on personnel information iview i am getting following error
EIC Authentication
An error occurred while data was read from your ERP system. Contact your system administrator.
I used SQL TRACE and RFC TRACE to find where it got stopped below see the trace result.
14 PA0105 REOPEN 0 SELECT WHERE "MANDT" = '001' AND "USRTY" = '0001' AND "USRID" = 'ESS_USER1'
988 PA0105 FETCH 1 1403
14 PA0001 REOPEN 0 SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
665 PA0001 FETCH 1 1403
17 PA0000 REOPEN 0 SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 AND "BEGDA" <= 20070622 AND "ENDDA" >= 20070622 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
615 PA0000 FETCH 1 1403
25 PA0001 REOPEN 0 SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 AND "BEGDA" <= 20070622 AND "ENDDA" >= 20070622 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
896 PA0001 FETCH 1 1403
16 PA0002 REOPEN 0 SELECT WHERE "MANDT" = '001' AND "PERNR" = 90000001 AND "BEGDA" <= 20070622 AND "ENDDA" >= 20070622 ORDER BY "MANDT" , "PERNR" , "SUBTY" , "OBJPS" , "SPRPS" , "ENDDA" , "BEGDA" , "SEQNR"
783 PA0002 FETCH 1 1403
13.178 ? Server 1 0 EPSAND1 ? Server HREIC_GET_AUTHENTICATION_ESS 643 309
What is the solution to solve this problem ?
Thanks and regards,
PhanikumarLooks like authorization issue. Could you confirm whether proper authorizations have given to this user?
Also, run the application again get an error and then go to Transaction ST22 and see if there is any system dump for this user.
Regards,
Nitin -
Error while Fetching data from BUT0ID data its urgent
hi all,
SElECT SINGLE partner FROM but0id INTO l_bp
WHERE type EQ 'BUP008' AND
idnumber EQ edid4-sdata+45(10).
this is my select statement its not working i have to fetch partner number with the help of sdata.
when i give 69093 instead of edid4-sdata+45(10) then i am getting the output
when i specify edid4-sdata+45(10) then it is not working
please tell me any one its urgent
Thanks & regards
VardhanHi,
Try doing this.Take the offset of sdata and move it into a varaiable and then check the condition in the query.
Regards,
Sharath -
Error while sending data from XI to BI System
Hello Friends,
I m facing an error while sending data from XI to BI. XI is successfully recived data from FTP.
Given error i faced out in communication channel monitoring:-
Receiver channel 'POSDMLog_Receiver' for party '', service 'Busys_POSDM'
Error can not instantiate RfcPool caused by:
com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed
Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR partner '10.1.45.35:sapgw01' not reached
TIME Fri Apr 16 08:15:18 2010
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -10
MODULE nixxi.cpp
LINE 2823
DETAIL NiPConnect2
SYSTEM CALL connect
ERRNO 10061
ERRNO TEXT WSAECONNREFUSED: Connection refused
COUNTER 2
Error displaying in message monitoring:-
Exception caught by adapter framework: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME Fri Apr 16 08:15:18 2010 RELEASE 70
Delivery of the message to the application using connection RFC_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: RfcAdapter: receiver channel has static errors: can not instantiate RfcPool caused by: com.sap.aii.af.rfc.RfcAdapterException: error initializing RfcClientPool:com.sap.aii.af.rfc.core.repository.RfcRepositoryException: can not connect to destination system due to: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached TIME.
Kindly suggest me & provide details of error.
Regards,
NarendraHi Narendra,
Message is clearly showing that your system is not reachable
102) RFC_ERROR_COMMUNICATION: Connect to SAP gateway failed Connect_PM TYPE=A ASHOST=10.1.45.35 SYSNR=01 GWHOST=10.1.45.35 GWSERV=sapgw01 PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner '10.1.45.35:sapgw01' not reached
Please check to ping the BI server IP 10.1.45.35 from your XI server , in case its working you can check telnet to SAP standard port like 3201/3601/3301/3901 etc.
It seems to be connectivity issue only.
Make sure your both the systems are up and running.
Revert back after checking above stuff.
Regards,
Gagan Deep Kaushal -
DB Connect Load - "Unknow error while uploading data from the DB Table"
Hi Experts,
We have our BI7 system connected to Oracle DB based third party tool. The loads are performing quite well in DEV environment.
I would like to know, how we transport DB Connect datasources to Quality systems? Any different process to be followed for DB Connect datasources?
At present the connections between BI Quality and the third party quality systems are established. We transported the DataSource from BI DEV system to BI quality system, but on trigerring an infopackage we are not able to perform loads. It prompts - "Unknow error while uploading data from the DB Table".
Also on comparing the DataSources in DEV system and Quality system there are no fields in "Proposal" tab of datasource in Quality system. Also I cannot change or activate Datasource in Quality system as we dont have change access in quality.
Please advice.
Thanks,
AbhijitHi,
Sorry for bumping an old thread ....
Did this issue get ever get resolved?
I am facing the same one. The loads work successfully in Dev. The transport for DBConnect DS also moved in successfully.
One strange this is that DB User for dev did not automatically change to db user from quality when I transported the DBConnect datasource. DBCon DS still shows me the DB User from Dev in Quality system
I get "Unknown Error" whenever I trigger the data package.
Advait -
Error while updating data from DataStore object
Hi,
Currently we are upgrading BW3.5 to BI7.0 for technical only,
we found and errors during process chain run in further processing step. This step is basically a delta loading from DSO to Cube.
The error message are:
Error while updating data from DataStore object 0GLS_INV
Message no. RSMPC146
Job terminated in source system --> Request set to red
Message no. RSM078
That's all no further errors message can be explained clearly here from system.
I have applied SAP note 1152453 and reactivate the datasource, infosource, and data target.
Still no help here!?
Please advise if you encountered these errors before.
Thanks in advance.
Regards,
David
Edited by: David Tai Wai Tan on Oct 31, 2008 2:46 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:50 PM
Edited by: David Tai Wai Tan on Oct 31, 2008 2:52 PMHi Vijay,
I got this error:
Runtime Errors MESSAGE_TYPE_X
Date and Time 04.11.2008 11:43:08
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Short text of error message:
No start information on process LOADING
Long text of error message:
Diagnosis
For process LOADING, variant ZPAK_0SKIJ58741F4ASCSIYNV1PI9U, the
end should be logged for instance REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX
under the log ID D4FIDCBHXPLZMP5T71JZQVUWX. However, no start has
been logged for this process.
System Response
No log has been written. The process (and consequently the chain)
has been terminated.
Procedure
If possible, restart the process.
Procedure for System Administration
Technical information about the message:
Message class....... "RSPC"
Number.............. 004
Variable 1.......... "D4FIDCBHXPLZMP5T71JZQVUWX"
Variable 2.......... "LOADING"
Variable 3.......... "ZPAK_0SKIJ58741F4ASCSIYNV1PI9U"
Variable 4.......... "REQU_D4FIDCEKO82JUCJ8RWK6HZ9KX"
Any idea? -
Error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7
Hi Gurs,
I'm getting the below error while extracting data from data source 0RT_PA_TRAN_CONTROL, in RSA7. (Actullly this is IS Retail datasource used to push POSDM data into BI cubes)
The error is:
Update mode "Full Upload" is not supported by the extraction API
Message no. R3011
Diagnosis
The application program for the extraction of the data was called using update mode "Full Upload". However, this is not supported by the InfoSource.
System Response
The data extraction is terminated.
Procedure
Check for relevant OSS Notes, or send a problem message of your own.
Your help in this regd. would be highly appreciated.
Thanks,
David.Hi David,
I have no experience with IS Retail data sources. But as message clearly say this DS is not suppose to be ran in Full mode.
Try to switch you DTPs/Infopackages to Delta mode.
While to checking extraction in source system, within TA RSA3 = Extractor checker, kindly switch Update mode field to Delta.
BR
m./ -
Error While extracting data from FIAA and FIAP
Hi Gurus,
I am facing error while extracting data from R/3 Source. 0FIAA, 0FIAP datasources. I am getting the same error repeatedly. No data will come BW. When I checked in RSA3 I can extract records.
Ther Error is as follows:
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
No Idocs arrived from the source system.
Kindly help. Your points are assured.
Thanks and Regards
PrasadHello Prasad,
Have you already checked what happened in the source system ?
You should verify if a job is running in sm37, or if there is no dump runtime errors due to the extraction in st22.
It could be a clue of what happened in R/3.
Let us know,
Regards,
Mickael -
Error while loading data from 0FI_TX_4 to ODS
Dear Friends,
One of our proccess chain getting error since a week, every day with same error while loading data from R3 data source 0FI_TX_4 to ODS.
Short dump is raised in R3 system.
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU13"
"BWFIR_READ_BSET_CPUDT_DATA"
ORA-01555
The number of records are below 10000 only.
All other chains are OK.
we have already searched SDN and Notes...and applied below solution, but still no use
Increase the size of all the roll back segments
Increase number of REDO logs
Decrease the number of records per data packet
Any more suggessions please ??
Thanks
TonyHow are you telling that no. of records are below 10000 .Have you checked the no.of records in PSA???
Now ,I tell you something which I had done for this error .I increased the Package size such that whole data gets transferred in single data package.Please make the package size as large as possible so that all the data can be processed in single package.
I know you have read so many threads on the same but what I am suggesting is what I have done and successfully rectified this issue.
regards,
rocks
Maybe you are looking for
-
I can't search through my Purchased content in the iOS 6 App Store.
In iOS 5 I could go to the Purchased area and push down for a search bar to show up. But in iOS 6 there is nothing there. I clean out room on my iPhone with the knowledge that if I really need this app later that I can just reinstall it. Now that is
-
When I connect itouch to the pc i can't click on any of the music stored?
Hey i just bought an itouch 2nd generation and have just finished transferring all my songs in my itunes library onto it. I did this by selecting them all and dragging them. A couple of songs did not transfer as I had moved them to a diff folder. On
-
Hi there, We recently acquired the CC package for our team. I noticed, I did not fill in my address at the time of registration (done now) and so did not receive the welcome package that my colleagues got. I was wondering if it's possible to have one
-
Very slow internet behind IOS Firewall
Hi, This is my first post in the community, so Hello everyone! Just a (hopefully) quick question, I am using a Cisco 887VA-M-K9 router to connect to my ISP via VDSL. The problem I seem to be having is that without any firewall implementation, I get 5
-
Windows 8 installer doesn't want to format the boot camp partition
Hello, I followed this instructions : http://www.pocket-lint.com/news/45898/how-to-install-windows-8-on-a-mac All works but the installer doesn't want to format the boot camp partition, i click on "option" > "format", i wait like 3-4 seconds (so not