Error while filling aggregates 'SQL Error: 12801'

Hello friends,
While filling aggregates for cube 0SD_C03 i am getting sql error 12801 and error SQL Error: ORA-12801: error signaled in parallel query server P029 ORA-00018: maxim .
Please suggest me a solution .
Regards
Nilesh Vakil

Hi Nilesh,
check:
Aggregate issue
Problems with BITMAPINDEX under ORACLE in BW
SAP Note Number: [159779|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_sys/~form/handler]
No 'Star Transformation' for a Hierarchy Changerun
SAP Note Number: [934281|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler]
Regards
Andreas

Similar Messages

  • Error while filling the set up table for 2LIS_11_VAITM

    Dear Experts,
    i am facing an error while filling the set up table for 2LIS_11_VAITM in the source system.
    The error was "Company code for sales org 9000 does not exist (document 1326)".
    when i checked the document in the Header table VBAK,company code was blank for the document .
    Company code was there in the selections for the setup table.
    The error means that company code should be maintained for the sales document as per my knolwedge.i think document was not created properly in the source system.
    Could you please help me out to over come the problem.
    Regards,
    Sunil...

    in the selection screen for filling the setup table, there is a parameter No. tolerated faulty documents
    you'll have to enter at least '1' here in your case
    it might be that there are other erronuous records, in that case it will crash again, and you'll have to increase the value for this parameter
    (under "normal" circumstances, all documents in the source should be correct... but apparently it's possible to circumvent this)

  • Error while filling setup tables for 2lis_13_vahdr

    Dear friends,
    I am getting below Error while filling setup tables for 2lis_13_vahdr.
    More faulty documents found than the tolerated 0000000000
    Message no. M2222
    Can any one guide me how to address this issue.
    Thanks and Regards
    Nithya

    Hello Nithya,
    It seems the No of tolerated faulty documents that you have given is 0. So when you initialize try to these.
    While executing OLI*BW including a value in the maintain  "No. tolerated faulty documents" - 5000 or 10000.
    Then execute the program in background.
    Once the job is completed check the background job log if any errors.
    Thanks
    Chandran

  • Error while filling setup table for Sales

    Dear Team,
    We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
    application component 11
    Error determining rate: foreign curr.  local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
    Message No M2810
    application component 13
    Billing document 480050000: error determining stats. currency rate (no updating)
    More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
    I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
    If anybody faced this problem kindly reply to this.
    Best Regards,
    SG

    Hi There,
    Might be your using a wrong document number.
    I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
    If you use vice versa that error will throw.
    Regards,
    MQ

  • Error while filling setup table for 2LIS_03_BF

    Hello,
    I am getting an error while filling set-up table for 2LIS_03_BF.
    Following is the screenshot of the same.
    If I check in ST22, I get following,
    I could fill the setup table for other datasource 2LIS_03_BX without any problem.
    Please suggest.

    Hi,
    Can you try filling the setup table data for that range in background?
    Sometimes because of huge data that you are trying to fill it might through you a dump. So please execute it in background and see if it works?.
    But still can't really say what that dump tells from what you attached.
    Thanks,
    Sathya

  • Timeout error while filling setup tables

    HI all
    I am getting timeout error while filling setup tables(OLI1BW).I clicked on execute button on hte screen.Its not scheduled as a background job.
    Going through threads i have come to know that to solve this issue
    1.BASIS team have to increase backgroung processses or memory
    2.run it as a background job.
    When I went to Program->Executein the backgroundPrint background parameters window has popped up.
    What to do in there?I am afraid if I include parameters like printer name....what is it and how long is it going to print?
    Please let me know.
    Thanks,
    Harika.

    thanks for the reply.
    it was set to LOCL only.
    But i have 3 options in the dropdown  windowsprinter :Send to onenote2007
                                      Microsoft XPS document writer
                                      OUrprinteraddress
    WHich one to choose here?
    Edited by: harikag on Aug 10, 2011 8:47 AM

  • Error while running catmetx.sql

    Have anybody received an error while running CATMETX.SQL in attempt to fix a known problem in 10gR2 - inconsistent datatype: expected BLOB, CLOB got CHAR?
    Any and all ideas appreciated.
    Greg
    Here is what I've got:
    SQL> @catmetx
    Package altered.
    Index altered.
    create or replace force view sys.ku$_xmlschema_view of sys.ku$_xmlschema_t
    ERROR at line 1:
    ORA-22973: size of object identifier exceeds maximum size allowed
    Grant succeeded.
    View created.
    etc.

    Before I'm willing to hazard a guess as to what is wrong some more information is required.
    1. What version are you on exactly (to 3 or 4 decimal places)
    2. What problem led you to decide to run catmex.sql?
    3. What metalink doc did you read that indicated you should?
    4. What are the results of the following queries?
    SELECT comp_name, version, status
    FROM dba_registry;
    SELECT owner, object_name, object_type
    FROM dba_objects
    WHERE status = 'INVALID';The alternative is an SR at metalink.

  • Getting error while runing utlu102i.sql:

    Dear Experts,
    I am getting following error while running utlu102i.sql script (Oracle 9.2.0.6,HP-UX 11.11)
    DECLARE
    ERROR at line 1:
    ORA-00980: synonym translation is no longer valid
    ORA-06512: at line 2925
    I nned to upgrade this database, how to resolve this problem, furthermore can we goahead on upgrading without solve this ? (pre. may be obtain from another database with almost same configuraton)
    Thanks & Regards
    Sunil Kumar

    Pl open an SR for your issue. You will need to run this script and execute its recommendations before you can upgrade. Are there any errors in the alert.log ? Are any other trace files created ?
    MOS Doc 400200.1 (ORA-0600 [17069] During Upgrade of Pre-10g Database to 10g+) may also help.
    HTH
    Srini

  • Error while realigning aggregates through master data attr. change run

    Hi all,
    We are using Sales Overview cube (SD_C03) on which we have built aggregates. now during the master data attribute change run it tries to realign the aggregate once the master data is loaded via Process chain. In this step we are facing an error:
    "Error while procesing aggregate <aggregate technical name>"
    From ST22 we can find
    Database error text........: "ORA-14400: inserted partition key does not map to any partition"
    Internal call code.........: "[RSQL/INSR//BIC/F200009 ]".
    Whereas from SM21 we can find out:
    Database error 14400 at INS access to table /BIC/F200009.
    /BIC/F200009 is the fact table of one of the aggreates we have. really looking forward to your valuable suggestion.
    Thnaks,
    Abhishek.

    Hi Jogeswara Rao Kavala,
    When I am pressing back or NO option  it is showing error like this
    What is this OK- Code means?
    how can I resume this process, even it was not going to back screen also and only one option is available for exit from this is by going into MENU-SYSTEM-SERVICES-BATCH INPUT-CANCEL.
    Sunil Boya

  • Fatal error while filling connection pool

    I was not getting a connection to an Oracle database and I was getting the following error in cms.log: "FATAL  Connector - Unable to create connection pool for T_Orbis_Oracle: Fatal error while filling connection pool for jdbc:oracle:thin:@MESDB:1521:ASPENB21" where T_Orbis_Oracle is the xMII link name and the database ASPENB21 is on server MESDB. I changed the database username in the link to SYSTEM and I then got a connection and a Created Connection pool message in the log. I then changed back to the username which originally was giving the error and it now also gave me a successful connection. I am now worried that there is an issue in the background which is gradually building up and will begin to fail again as previously. Can anyone explain what is causing this problem and suggest how I can correct it? Thanks, John.

    John,
    Check you have installed the JDBC driver ojdbc14.jar (works for both 9 and 10).
    Also check the server package:
    MII 11.x--->ServerPackage com.lighthammer.Illuminator.connectors.IDBC
    MII 12.x--->com.sap.xmii.Illuminator.connectors.IDBC
    Carefull when you set up the string because some oracle databases have servicenames instead of SID, and the url was different if you use them instead of the SID.
    For services names the url is jdbc:oracle:thin@host:port:SID
    Also check your Network firewall between MII and DB and ports too.
    Oracle9i installs with a number of default accounts.You must unlock all other accounts before using them. Oracle recommends changing all user passwords immediately after installation.
    -Suresh
    Edited by: Suresh Hiremath on Jul 29, 2009 8:20 AM

  • Error while connecting to SQL SERVER from OWB

    HI All,
    I got the following error while connecting to SQL SERVER from OWB(10gR2).
    1). Created DSN with (GMSCADA)
    2). tnsnames file is updated with the following information
    GMSCADA =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 172.16.60.29)(PORT = 1433))
    (CONNECT_DATA =
    (SERVICE_NAME = SA)
    3). Tried to connect to SQL SERVER frm OWB
    Username: sa
    password: sa
    host: 172.16.60.29
    port: 1433
    service name: GMSCADA
    schema: sa
    I got the following error, when I click Test Connection:
    ORA-28545: error diagnosed by Net8 when connecting to an agent
    Unable to retrieve text of NETWORK/NCR message 65535
    ORA-02063: preceding 2 lines from OWB_3095
    Regards,
    Kumar.

    Hi David,
    What is Gateway, How I have to setup, Please let me know.
    I tried according to the Demo, But still I am facing the same problem. Which system IP I have to put in the host details.
    Can u please let me know.
    Regards,
    Kumar.

  • Error while powering on: Internal Error

    I have a fresh install of windows 8.1 with all the latest updates installed. Whenever I try to power on a virtual machine, I get the error "Error while powering on: Internal Error". I've searched the forums and tried all the suggested fixes including ensuring that the auth service is running, renaming the vmware.exe file and running vmware.exe as an administrator. Looking through the logs, it seems like there are major permissions issues, but I have no idea how to resolve them. Can anyone help? I've attached the relevant log files.

    Hi hyjkim, and welcome to the VMware Communities!
    What is your host system?  You may need to check for BIOS/firmware updates for your host... it is reporting nonsense information to us, which is the cause of the failure.
    If you are sure that your host machine has the latest BIOS/firmware updates applied, let me know and I'll provide a workaround suitable for your system.
    Thanks,
    Darius

  • Error while releasing PO :  System error: block object EKKO, Key PO Number.

    Dear All,
    I am getting error while releasing PO :  System error: block object EKKO, Key PO Number.
    Please help to resolve.

    Hi Friend,
    How the issue is resolved, because i am facing the same issue, while positing Service entry sheet.
    If you can give us solution, it will be more useful and more appreciated
    REgards
    RS

  • Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED

    Hi experts,
    I have a big issue in production server,
    the Queues are stuking in smq2 " command to tRFC/qRFC: execute LUW again"
    if i am reprocess or press F6 it is going manually.
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Adapter
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
      <SAP:P1>400</SAP:P1>
      <SAP:P2>ICM_HTTP_CONNECTION_FAILED</SAP:P2>
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText><html><head><title>Application Server Error</title> <style type="text/css"> body { font-family: arial, sans-serif;} </style> </head> <BODY text="#172972" link="#808080" vlink="#808080" alink="#8e236b" bgcolor=white leftmargin="0" topmargin="0" marginheight="0" marginwidth="0"> <table height="61" width="100%" border="0" cellspacing="0" cellpadding="0"><tr><td background="http://xidist:8000/sap/public/icman/img/bluebar_tile.gif" height="30"><table> <tr> <td width=5></td> <td width=20% nowrap><font face=arial size="-1" color=white>SAP NetWeaver Application Server </font></td><td width=75% align="right" nowrap><font face=arial size="-1" color="white"><a href="http://help.sap.com/">Help </font></td><td width=5% nowrap></font></td> </tr></table> </td><td rowspan=2 width=122 height=61 valign=top><img src= "http://xidist:8000/sap/public/icman/img/theme.jpg" width=122 height=61 border=0 alt="SAP"></td> </tr><tr><td background="http://xidist:8000/sap/public/icman/img/graybar_tile.jpg" height="31">  </td></tr> </table> <br><br> <table width=800> <tr><td width=50 nowrap> </td><td> <H2><b>404 Resource not found</b></H2><br>Partner not reached<br><br><hr> <table border="0"> <tr><td>Error:</td><td>-20</td></tr> <tr><td>Version:</td><td>7000</td></tr> <tr><td>Component:</td><td>ICM</td></tr> <tr><td>Date/Time:</td><td>Wed May 14 15:50:24 2014 </td></tr> <tr><td>Module:</td><td>icxxconn.c</td></tr> <tr><td>Line:</td><td>2341</td></tr> <tr><td>Server:</td><td>xidist_GXI_00</td></tr> <tr><td>Error Tag:</td><td>{004654a1}</td></tr> <tr><td>Detail:</td><td>Connection request from (110/28816/0) to host: xidist, service: 50000 failed (NIESERV_USED) EX-T110, U28816, 001 PIAFUSER, 10.1.57.50, 15:50:24, M0, W1, , 1/0</td></tr> </table> <p></p> </td></tr></table> <table><tr><td width=50 nowrap></td> <td nowrap><FONT SIZE=-1><a href="http://www.sap.com/">&copy; 2001-2009, SAP AG</a></FONT> </td></tr></table> </body></html></SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while receiving by HTTP (error code: 400, error text: ICM_HTTP_CONNECTION_FAILED)</SAP:Stack>
      <SAP:Retry>N</SAP:Retry>
      </SAP:Error>
    Regards,
    Kiran polani

    Dear Sriram Ramani,
    in ths case some scenarios are working good. proxy to soap, idoc to soap and jdbc to proxy, proxy to jdbc all are working with out error.
    but my problem is in Soap to RFC case..
    for all RFC communication channels are working but some time it is throwing RFC_COMMUNICATION_ERROR and messages are stucks in smq2 with retry.
    when i check with retry error with in sxmb_moni log showing ICM_HTTP_CONNECTION_FAILED with error code 400.
    not for all signals for few signals for some time..
    Why it is happening i can't understand.
    in repository it is saying Repsitory object hmi failed and address already in use.
    is there any problem with loading IR objects.
    Please suggest me good suggestion for this type of issue what can do for this to resolve.
    Regards,
    Kiran Polani

  • Error while receiving by HTTP (error code: 110)  ?

    Hi Experts,
    I am working on IDOC to file Scenario.
    I am getting this error in SXMB_MONI. What may be the reason.
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">CLIENT_RECEIVE_FAILED</SAP:Code>
      <SAP:P1>110</SAP:P1>
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error while receiving by HTTP (error code: 110, error text: )</SAP:Stack>
      <SAP:Retry>A</SAP:Retry>
      </SAP:Error>
    Best Regards,
    Anil

    Check these threaads:
    Re: XI Error when upgraded to SP14 (Error Code 110) CLIENT_RECEIVE_FAILED
    Regards,
    ravi

Maybe you are looking for