Error while filling DDIC table.

hi friends,
when i try to insert or modify the DDIC table (which is made by user)
it Shows the error message
(The type of the database table and work area (or internal table)          
"T_FTAB" are not Unicode-convertible . . . . . . . . . .          )
how to rectify the error.
thanks in advance.

Hi Bhupi.
I also had the same error in my program yesterday.
I have found the cause,
I would like share it with you,
The Possible reasons for this error are,
1. The Work area and the Table has Different Structures.
2. There might be some extra fields in your table that the user table.
3. Missing fields
Let me tell you my Issue, If it is the same case as yours, That will be good.
I used Infotype P0006 and PA0006 in HR.
When I wrote a SELECT query -
select * from PA0006
            into T_table6.
But, T_table6 is refered to P0006 and * is used.
I got the same error.
Because, The Table T_table6 refers to P0006 which has the stucture different with respect to Infotype PA0006.
As the Infotype P0006 has no MANDT field and PA0006 has Mandt field and may be some extra fields.
So declaration is also very important.
Hope that's usefull.
Good Luck & Regards.
Harsh Dave

Similar Messages

  • Error while filling setup tables for 2lis_13_vahdr

    Dear friends,
    I am getting below Error while filling setup tables for 2lis_13_vahdr.
    More faulty documents found than the tolerated 0000000000
    Message no. M2222
    Can any one guide me how to address this issue.
    Thanks and Regards
    Nithya

    Hello Nithya,
    It seems the No of tolerated faulty documents that you have given is 0. So when you initialize try to these.
    While executing OLI*BW including a value in the maintain  "No. tolerated faulty documents" - 5000 or 10000.
    Then execute the program in background.
    Once the job is completed check the background job log if any errors.
    Thanks
    Chandran

  • Error while filling setup table for Sales

    Dear Team,
    We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
    application component 11
    Error determining rate: foreign curr.  local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
    Message No M2810
    application component 13
    Billing document 480050000: error determining stats. currency rate (no updating)
    More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
    I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
    If anybody faced this problem kindly reply to this.
    Best Regards,
    SG

    Hi There,
    Might be your using a wrong document number.
    I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
    If you use vice versa that error will throw.
    Regards,
    MQ

  • Timeout error while filling setup tables

    HI all
    I am getting timeout error while filling setup tables(OLI1BW).I clicked on execute button on hte screen.Its not scheduled as a background job.
    Going through threads i have come to know that to solve this issue
    1.BASIS team have to increase backgroung processses or memory
    2.run it as a background job.
    When I went to Program->Executein the backgroundPrint background parameters window has popped up.
    What to do in there?I am afraid if I include parameters like printer name....what is it and how long is it going to print?
    Please let me know.
    Thanks,
    Harika.

    thanks for the reply.
    it was set to LOCL only.
    But i have 3 options in the dropdown  windowsprinter :Send to onenote2007
                                      Microsoft XPS document writer
                                      OUrprinteraddress
    WHich one to choose here?
    Edited by: harikag on Aug 10, 2011 8:47 AM

  • Error while filling setup table for 2LIS_03_BF

    Hello,
    I am getting an error while filling set-up table for 2LIS_03_BF.
    Following is the screenshot of the same.
    If I check in ST22, I get following,
    I could fill the setup table for other datasource 2LIS_03_BX without any problem.
    Please suggest.

    Hi,
    Can you try filling the setup table data for that range in background?
    Sometimes because of huge data that you are trying to fill it might through you a dump. So please execute it in background and see if it works?.
    But still can't really say what that dump tells from what you attached.
    Thanks,
    Sathya

  • Strange error while filling setup tables for purchasing

    hi experts,
    while filling setup tables, job is getting cancelled. when I check in sm37 message is
    Enter rate GBP / SGD rate type M for 03.08.2009 in the system settings
    Job cancelled after system exception ERROR_MESSAGE
    It is for only the 8th month of 2009. If I run for other dates it is succesfull.
    I am not able to understand what it mean. 
    Pls guide me how to resolve this.
    regards,
    rajesh.

    hi
    according to sven check this link
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/dc43c445-0d01-0010-23a1-ca348ff5f975?QuickLink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/a0d5bf96-b19b-2c10-e3b6-e2f12a3de99a?QuickLink=index&overridelayout=true
    EUR Conversion to USD
    may help you.

  • Short dump error while filling setup tables for 2LIS_06_INV

    Hi All,
    I am trying to fill the setup table.While filling the stup table for 2lis_06_inv datasource, i got the Dump error after some time.
    Error
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
    Short text
        SQL error in the database when accessing a table.
    plz can anyone help me out...

    Dear friends,
    I tried it by giving the selection on fiscal year,but again same problem.If i give 1 0r 2 document numbers in selection then extractor works fine.
    error:in detail.
    Runtime Errors         DBIF_RSQL_SQL_ERROR
    Exception              CX_SY_OPEN_SQL_DB
    Short text
        SQL error in the database when accessing a table.
    Information on where terminated
        Termination occurred in the ABAP program "SAPLMRMBW" - in "BW_RETRIEVE_DB_CO".
        The main program was "RMCENEUR ".
        In the source code you have the termination point in line 827
        of the (Include) program "LMRMBWF01".
        The program "SAPLMRMBW" was started as a background job.
        Job Name....... "RMCENEUR"
        Job Number..... 10524100
        The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
        procedure "BW_RETRIEVE_DB_CO" "(FORM)", but it was neither handled locally nor
         declared
        in the RAISING clause of its signature.
        The procedure is in program "SAPLMRMBW "; its source code begins in line
        806 of the (Include program "LMRMBWF01 ".
      806 FORM bw_retrieve_db_co  USING    t_mcrbkey_bv    TYPE mcrbkey_t
      807                                  t_mcrbkey_nbv   TYPE mcrbkey_t
      808                                  t_ekbe_acc      TYPE t_ekbe
      809                         CHANGING t_mcrbco        TYPE mcrbco_t.
      810
      811   TYPES: BEGIN OF s_target.
      812   TYPES: table_left LIKE rbco.
      813   TYPES: table_right TYPE rbex.
      814   TYPES: END OF s_target.
      815   TYPES: t_target TYPE TABLE OF s_target.
      816
      817
      818   DATA: t_rbco_nbv  TYPE t_target,
      819         t_rbco_bv   TYPE t_target,
      820         s_rbco      TYPE s_target,
      821         s_ekbe      LIKE ekbe,
      822         s_mcrbco    TYPE mcrbco,
      823         l_index     LIKE sy-tabix.
      824
       825 * Data source: invoice item non-background
      826   IF NOT t_mcrbkey_nbv[] IS INITIAL.
    *>>>>>     SELECT * FROM  rbco AS r LEFT OUTER JOIN rbex AS i*
      828        ON   ( rmandt = imandt AND
      829               rbelnr = ibelnr AND
      830               rbuzei = ibuzei AND
      831               rcobl_nr = icobl_nr )
      832        INTO TABLE t_rbco_nbv
      833        FOR ALL ENTRIES IN t_mcrbkey_nbv
      834        WHERE r~gjahr = t_mcrbkey_nbv-gjahr AND
      835              r~belnr = t_mcrbkey_nbv-belnr.
      836   ENDIF.
      837 * Data source: invoice item background
      838   IF NOT t_mcrbkey_bv[] IS INITIAL.
      839     SELECT * FROM  rbco AS r LEFT OUTER JOIN rbex AS i
      840        ON   ( rmandt = imandt AND
      841               rbelnr = ibelnr AND
      842               rbuzei = ibuzei AND
      843               rcobl_nr = icobl_nr )
      844        INTO  TABLE t_rbco_bv
      845        FOR ALL ENTRIES IN t_mcrbkey_bv
      846        WHERE r~gjahr = t_mcrbkey_bv-gjahr AND
    Thnks in advance

  • Error while filling setup table

    Hello all
    I am trying to fill a setup table for 2lis_11_vahdr DS. I deleted setup table firts using LBWG and then proceeded the setup process by using OLI7BW , while i did that i got an error message "Error determing rate:foreign curr.DEM local curr.EUR date 02.01.1997(doc 4969)"
    could anyone tell me what this error is referring to ?
    thanks

    Hi DK.............
    I also think this is a problem of Exchange rate only..............maintain the exchange rate in SPRO >> General Settings >> Enter Exchange Rates.(Tcode : OB08 )
    Exchange rate table is TCURR.
    Exchange rates are maintained in r/3 and transfer to bw.................rsa1>>source system>>r/3 source system>>right click Transfer...........
    Regards,
    Debjani...........

  • Error while filling setup tables

    Hi All,
    By mistake my Delta queue for SD Deliveries (2LIS_12_). NOw as a solution we are filling in the setup tables again.
    But the request for filling up the tables cancelled giving the error "Document number does not exist".
    I donot know, how to solve this? Plz help me ,....Its really really urgent.
    Thanx in advance.

    Hi Preet,
    Go through this links:
    Re: problem when initializing setup tables for lo update
    "No extraction structure active or no BW connected"
    LO: No extraction structure active or no BW connected
    Thanks,
    Ajay

  • Error while filling setup table for Quality Mangement D/Sources

    HI Experts,
    Iam trying to fill the QM setup tables.
    Steps iam following are
    1.T-code OLIQBW
    2.Selecting Event QV, QE and gave selection parameters and name for Run.
    3. Execute
    4.Run Time Error CALL_FUNCTION_PARM_UNKNOWN
       Exception  CX_SY_DYN_CALL_PARAM_NOT_FOUND
       Date and Time          27.08.2009 11:21:01                                                                               
    Function parameter "I_ADDITIONAL_DATA" is unknown.

    Hi Mansi,
    Runtime Errors         CALL_FUNCTION_PARM_UNKNOWN                                                 
    Exceptn                CX_SY_DYN_CALL_PARAM_NOT_FOUND                                             
    Date and Time          27.08.2009 11:56:20                                                                               
    ShrtText                                                                               
    Function parameter "I_ADDITIONAL_DATA" is unknown.                                                                               
    What happened?                                                                               
    Error in ABAP application program.                                                                               
    The current ABAP program "SAPLQMER" had to be terminated because one of the                  
         statements could not be executed.                                                                               
    This is probably due to an error in the ABAP program.                                                                               
    Function module "QEEA_COMBINE_TO_ONE_FEATURE" was called                                     
         with the parameter "I_ADDITIONAL_DATA".                                                      
         This parameter is not defined.                                                                               
    Error analysis                                                                               
    An exception occurred. This exception is dealt with in more detail below                     
         . The exception, which is assigned to the class                                              
          'CX_SY_DYN_CALL_PARAM_NOT_FOUND', was neither                                               
         caught nor passed along using a RAISING clause, in the procedure                             
          "QMER_EXTRACTION_RD_RESULTS" "(FUNCTION)"                                                   
    Since the caller of the procedure could not have expected this exception                     
          to occur, the running program was terminated.                                               
         The reason for the exception is:                                                             
         The reason for the exception is:                                                       
         Function module "QEEA_COMBINE_TO_ONE_FEATURE" was called                               
         with the parameter "I_ADDITIONAL_DATA".                                                
         This parameter is not defined.                                                                               
    Missing RAISING Clause in Interface                                                        
         Program                                 SAPLQMER                                       
         Include                                 LQMER$01                                       
         Row                                     5                                              
         Module type                             (FUNCTION)                                     
         Module Name                             QMER_EXTRACTION_RD_RESULTS                                                                               
    Trigger Location of Exception                                                              
         Program                                 SAPLQMER                                       
         Include                                 LQMERU01                                       
         Row                                     488                                            
         Module type                             (FUNCTION)                                     
         Module Name                             QMER_EXTRACTION_RD_RESULTS

  • Error while filling the set up table for 2LIS_11_VAITM

    Dear Experts,
    i am facing an error while filling the set up table for 2LIS_11_VAITM in the source system.
    The error was "Company code for sales org 9000 does not exist (document 1326)".
    when i checked the document in the Header table VBAK,company code was blank for the document .
    Company code was there in the selections for the setup table.
    The error means that company code should be maintained for the sales document as per my knolwedge.i think document was not created properly in the source system.
    Could you please help me out to over come the problem.
    Regards,
    Sunil...

    in the selection screen for filling the setup table, there is a parameter No. tolerated faulty documents
    you'll have to enter at least '1' here in your case
    it might be that there are other erronuous records, in that case it will crash again, and you'll have to increase the value for this parameter
    (under "normal" circumstances, all documents in the source should be correct... but apparently it's possible to circumvent this)

  • LO-COCKPIT: error in Filling Setup tables

    Dear Guru's:
    While filling setup tables from tcode: sbiw, I am getting following error:
    EXTRACT STRUCTURE NOT ACTIVE OR BW NOT CONNECTED.
    Bw is connected with R/3- I also have checked the connection thr' SM59, its working.
    And even Extract structure is Active.
    Then why this error is coming?
    Pls let me kno.
    Points will be rewarded.
    Thank you.

    Are you on Developement? If it is, please go to RSA6, look for the data source, and see if the extract structure is actually active, there may be one or more includes, check each one of them, if everything is fine, I would just reactivate it and move it to quality and production. If that happens only in Production, but it is fine in development, then I would make sure the development and production sytem extract structure matchs. Sometimes, someone modifies the development but never moved it to production. Check the last transport created for that extract structure too.
    thanks.
    Wond

  • Error while dropping a table

    Hi All,
    i got an error while dropping a table which is
    ORA-00600: internal error code, arguments: [kghstack_free1], [kntgmvm: collst], [], [], [], [], [], [], [], [], [], []
    i know learnt that -600 error is related to dba. now how to proceed.
    thanks and regards,
    sri ram.

    00600 errors should be raised as service request with Oracle as it implies some internal bug.
    You can search oracle support first to see if anyone has had the same class of 00600 error, and then if not (and therefore no patch) raise your issue with Oracle.
    http://support.oracle.com

  • Error while loading AS400 table

    Posted: 14 May 2014 08:11
    Post subject: Error while loading AS400 table
    Hi,
    I was trying to load an AS400 table using a flat file as source. The table and flat file has a single field only. I'm getting the error "<SQLExecute>: <[IBM][System i Access ODBC Driver]Error in assignment.>"
    The screenshot of the full error message is attached. can someone please help me to resolve this.
    Thanks,
    david

    Posted: 14 May 2014 08:11
    Post subject: Error while loading AS400 table
    Hi,
    I was trying to load an AS400 table using a flat file as source. The table and flat file has a single field only. I'm getting the error "<SQLExecute>: <[IBM][System i Access ODBC Driver]Error in assignment.>"
    The screenshot of the full error message is attached. can someone please help me to resolve this.
    Thanks,
    david

  • Full Load: Error while executing :TRUNCATE TABLE: S_ETL_PARAM

    Hi All,
    We are using Bi Apps 7.9.6.1. Full Load was running fine. But Now we are facing a problem with truncating a table "S_ETL_PARAM".
    I have restart informatica Server And also DAC Srever. But still I am getting the same in the DAC Log as, *"NOMALY INFO::: Error while executing : TRUNCATE TABLE:S_ETL_PARAM*
    *MESSAGE:::com.siebel.etl.database.IllegalSQLQueryException: DBConnection_OLTP:SIEBTRUN ('siebel.S_ETL_PARAM')*
    *Values :*
    *Null Map*
    *EXCEPTION CLASS::: java.lang.Exception"*
    Any Suggestion.....
    Thanks in Advance,
    Deepak

    are you trying to run incremental load when you get this truncate error? can you re-run full load and see that still runs ok? pls also check your DW side database logs like alert lor any DB level issue. such errors do not throw friendly messages in DAC/Informatica side.

Maybe you are looking for

  • Vendor Report without classification.

    Hi Experts, My client wants a report to display all those vendors for whom the classification data is not maintained. Please help.. Thanks in advance

  • New switcher looking for a medium-powered graphics app

    I'm new to the Mac and I'm looking for a reasonably easy to use graphics app. Bar this problem I'm so happy with the iMac I've had for just over a week I could cry. It's bloody wonderful (sorry, I'm English). I've used the GIMP before but to be hones

  • Hard Disk Not Exist help please

    Hi, not sure if this should be in Recovery or Hardware or Operating Systems as it involves all three! I have an HP G61-110SA running Win 7 64 bit; product no. VR523EA.  Also have serial no if needed.  One problem is, as the laptop is 6 years old, it'

  • JSP newbie.  Strange classnotfoundexception

    I have recently started writing JSPs. I am an experienced Java programmer, but have not ventured into JSPs until just now. While writing some test JSPs, I have run into a big problem that I cannot seem to resolve. While attempting to run my JSP from

  • Unable to create KM transport package

    In Content Admin>KM Content> Exports>Archived exports> user cant see anything in Archives and log is showing error: 01-Jul-2009 03:12:27     Info     Starting export "static content - Facilities" (003aebeb-1a48-2c10-2bb8-cffcc4b5861e) using mode "Fil