Error while filling set up table for Inventory

Hi,
While filling up setup table for Inventory, 2lis_03_bf, i get an error, Plant F041 doesnot exist. I am trying to fillup the table without any selections. Can anyone please suggest me a solution.
Thanks,
Praveen

Please check the following link:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328
Hope it helps you.

Similar Messages

Error while filling set up tables for 2LIS_11 data sources

hello All ,
I tried to fill setup tables for 2LIS_11 data sources in OLI7BW , but the job RMCVENUA is getting cancelled. below is the Job Log ,
Job started
Step 001 started (program RMCVNEUA, variant &0000000000005, )
Start of order processing
Error determining rate: foreign curr. local curr. INR date 10.09.2008 (doc. 1)
Job cancelled
Is there any setting required in R3 side before filling setup tables of SD ?
I am able to fill the setup tables for 2LIS_05 ( Notifications) successfully.
Regards ,
Amol Kulkarni
Edited by: Amol Kulkarni on Dec 4, 2008 3:59 AM
Edited by: Amol Kulkarni on Dec 4, 2008 4:00 AM

Hi,
one of the sales document currencies is not maintained properly in the system and therefore its failing.
you need to correct those documents before filling the set up tables.
Either you can chose the option fault document toleration limit to 1000...so that 1000 records wrong records can be tolerated or you have to crrect it first before filling up the set up tables.
This will generally happen in test systems.... but very rare in production...so try to maintain currrency again in the system.
generally you will see the sales doc number in the error for which its failing.
May be at the time of filling some óne was working on some sales document and tried it save it.
correct that doc and fill the set up tables again.
Thanks
Ajeet

Error while filling set up table SD-Billing Documents - Perform Setup

Hello friends,
while filling set up table of SD-Billing Documents - Perform Setup
i am getting error 'TSV_TNEW_PAGE_ALLOC_FAILED' . i am executing this job in background process . Please suggest me a solution .
Regards
Nilesh Vakil

Hi,
Try some other LO extractor in RSA3 to check if you get the same error.
If you dont then it may not be system memory issue, check if thr is some user exit written for the extractor.The problem could be in the user exit whr the internal table may get overflown and lead to the page overfloen dump.
If this is also not the case try reducing the packet size.
Let me know if the issue is resolved.
Regards,
Ashwin

Dump error while filling the Setup table

Hi All,
I am trying to fill the setup table.While filling the stup table for 2lis_03_BF datasource, i got the Dump error after some time. I have checked the data in Setup table and found 9000 records.
Shall i proceed further by pulling the data from R/3 to BW.I have checked the data in RSA3 and got some data.
Shall i schedule the data from BW side.
Pls help on this issue.
Thanks,
Siva.

Thanks Reddy and JS.
I have checked the TCODE SM37 and found no jobs are available. I have checked the TCODE : NPRT and found some logs.In this, it is not showing any errors.
I have checked in SM21 and found some errors.
Time_______________Text
17:08:10____________Transaction Canceled M2 630 ( )
17:23:47____________Run-time error "TIME_OUT" occurred
17:23:47____________> Short dump "090302 172347 sand1_W2 2_00 " generated
17:30:08____________Status: 80% of IL00.DAT is in use
17:30:17____________Status: 90% of IL00.DAT is in use
17:30:18____________Overflow of Paging File (032768 Blocks)
17:30:18____________Run-time error "MEMORY_NO_MORE_PAGING" occurred
17:30:19____________> Short dump "090302 173018 sand1_W2 2_00 " generated
Shall i execute filling the setup table again. Do i need to give termination time More ( 2 Hrs difference)
Any issue on refilling the setup table again.
Pls suggest.
Thanks,
Siva.

Problem while filling the Setup Table for the DS 2LIS_02_SCL.

Hi All,
When I am trying to fill the Setup table for the DataSource 2LIS_02_SCL and only for one specific Purchase Order, it is showing me a message like
u201CDataSource 2LIS_02_ITM contains data still to be transferredu201D
I have deleted the Setup Table and I want to delete the entries from SM13, but I do not have Authorization.
Also, here I am trying to fill the Setup Table for 2LIS_02_SCL and not for 2LIS_02_ITM, but the message displayed above is showing as 2LIS_02_ITM DataSource. I think the Setup Table will be same for both the DataSources.
Waiting for your valuable inputs.
Thanks in Advance.

Hi,
When you want to fill the setup tables first you need to delete setup tables to avoid the duplicate entires in setup tables ( you can delete the setup tables by using t.code LBWG with application no is 02)
In your case, the data souce is 2LIS_02_SCL for purchasing.
when you want to delete the setup tables by using t.code LBWG with 02 application no it will delete all the purchasing related data from all the data sources like
2LIS_02_SCL
2LIS_02_ITM
Before the deletion of setup tables you need to clear the delta Queues and stop the V3 jobs, which loads the data to Delta Queues (RSA7) and Update tables(LBWQ).
you need to run the V3 jobs manually by using LBWE > Job control > and schedule the jobs until the delta queues will get 0 records. that means no data will be available in RSA7 and LBWQ
go to SM37 to see the jobs LIS-BW-VB_APPLICATION_02,
once the delta queues gets 0 records by running V3 Jobs manullay.
Then remove the released state jobs > remove from schedule means delete the jobs in LBWE > Go to job control > you can delete the released jobs.
Becuase No postings to be done in application tables, while running setuptable filling you should take some down time to fill the setup tables.( OLI*BW) *=Application number.
Once you clear the Queues and delete the v3 jobs, then you need to fill the setup tables after deletion of setup tables.
once you fill the setup tables , by running intialization to BW side the delta Queue is formed for the data source in R3 side
Now the postings can be done in R3 side, so you need schedule back the V3 jobs, which you already delted from LBWE to load the data from application tables to RSA7 or LBWQ.
I hope this may help yoou.
Regards.
Rambabu
Edited by: Rambabu velanati on Jun 9, 2010 4:41 PM
Edited by: Rambabu velanati on Jun 9, 2010 4:52 PM

Error while Filling Up setup table

Hi All,
When i try to Fill the Setup table i am getting error message as below
Error determining rate: foreign curr. local curr.
INR date 25.03.2008 (doc. 11990)
Help us,
Regards,
Hari

Hi Hari,
the reason for the error is, some set up fillings covert the currency while copying from base table to set up table.
This is the case here.
So get in touch with your Fi resource of ERP to maintain the currency translation giving those detail.
I think this filling is not being done in production.
So further not to get such error ask thgem to copy all exhange rates from Production to this system.
Otherwise, if the setup doent find someother exhange rate, then again it would fail. and the same procedure needs to be repeated.
Naveen.A

Error while Filling a setup table

Hi,
While i filling a setup table, i got this error message,
"Error determining Rate:foreign curr .local curr
INR date 27.06.2007 (doc.8166) "
any body tell me the meaning of this and how to rectify it.
-Arun.M.D

Hello Arun
You are getting this error because Currency Exchange Rate is not being loaded to your system for INR. Ask FI team to maintain this.
Reward points if it is helpfull.
Thanks
Tripple k

Error while filling SD setup tables due to currency rate

Hello,
I'm trying to fill setup tables for Orders using Tcode OLI7BW
Below is the error message I get,
"Error determining rate: foreign curr. local curr. EUR date 21.03.2008 (doc. 3000000)"
The document does have the statistics currency(VBAK-STWAE) value which is causing the conversion to fail.What customization is required to set the statistics currency?
Please suggest..
Thanks You,

The exchange rates are maintained.I have already checked the table TCURR.
I checked in the debugging where the error is occuring and it is during the conversion of the local currency into statistics currency.Since the statistics currency is blank for the document the conversion FM is returning the error.

Error while filling PM setup tables

Hi All, I activated the PM datasource(2LIS_17_I3HDR) in LBWE and then deleted the setup tables for PM in LBWG and then replicated the datasources in BW. When I try to fill setup tables for PM(OLIIBW) then I get error:
No extract structure for event I0: Messages active
Message no. MCEX 106
Diagnosis :You called the setup for the extractor structures of application '17' (Plant Maintenance). However no extractor structure is active for event I0 (messgaes).
I checked LBWE and the datasource (2LIS_17_I3HDR) is active. I check the OSS note 914268, I am hesistant to apply this note as due to heavy customizations at my company there has been issue while applying support packs, is there a work around? Kindly advice.
**we are on PI is 2004_1_46C and the support package is 5.

Hi,
Had the same problem, make sure that your R3 env. that your are working at, is defined as source system at the BW client
Shai

Error while filling the Setup tables

Hi Experts,
I tried to fill the setup tables using the transaction code SBIW. But there I found an error saying that
"Error determining rate: foreign curr. local curr. EUR date 25.07.2007 (doc. 2497)
Message no. M2810".
Please help me in this..
With Regards,
Yokesh Kumar.

Hello Yokesh,
Please check whether the Exchange rates that are used in the records are maintained in SPRO.
Thanks
Chandran

Error while filling setup table for 2LIS_03_BF

Hello,
I am getting an error while filling set-up table for 2LIS_03_BF.
Following is the screenshot of the same.
If I check in ST22, I get following,
I could fill the setup table for other datasource 2LIS_03_BX without any problem.
Please suggest.

Hi,
Can you try filling the setup table data for that range in background?
Sometimes because of huge data that you are trying to fill it might through you a dump. So please execute it in background and see if it works?.
But still can't really say what that dump tells from what you attached.
Thanks,
Sathya

Short dump error while filling setup tables for 2LIS_06_INV

Hi All,
I am trying to fill the setup table.While filling the stup table for 2lis_06_inv datasource, i got the Dump error after some time.
Error
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Short text
    SQL error in the database when accessing a table.
plz can anyone help me out...

Dear friends,
I tried it by giving the selection on fiscal year,but again same problem.If i give 1 0r 2 document numbers in selection then extractor works fine.
error:in detail.
Runtime Errors         DBIF_RSQL_SQL_ERROR
Exception              CX_SY_OPEN_SQL_DB
Short text
    SQL error in the database when accessing a table.
Information on where terminated
    Termination occurred in the ABAP program "SAPLMRMBW" - in "BW_RETRIEVE_DB_CO".
    The main program was "RMCENEUR ".
    In the source code you have the termination point in line 827
    of the (Include) program "LMRMBWF01".
    The program "SAPLMRMBW" was started as a background job.
    Job Name....... "RMCENEUR"
    Job Number..... 10524100
    The termination is caused because exception "CX_SY_OPEN_SQL_DB" occurred in
    procedure "BW_RETRIEVE_DB_CO" "(FORM)", but it was neither handled locally nor
     declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPLMRMBW "; its source code begins in line
    806 of the (Include program "LMRMBWF01 ".
806 FORM bw_retrieve_db_co USING    t_mcrbkey_bv    TYPE mcrbkey_t
807                                  t_mcrbkey_nbv   TYPE mcrbkey_t
808                                  t_ekbe_acc      TYPE t_ekbe
809                         CHANGING t_mcrbco        TYPE mcrbco_t.
810
811   TYPES: BEGIN OF s_target.
812   TYPES: table_left LIKE rbco.
813   TYPES: table_right TYPE rbex.
814   TYPES: END OF s_target.
815   TYPES: t_target TYPE TABLE OF s_target.
816
817
818   DATA: t_rbco_nbv TYPE t_target,
819         t_rbco_bv   TYPE t_target,
820         s_rbco      TYPE s_target,
821         s_ekbe      LIKE ekbe,
822         s_mcrbco    TYPE mcrbco,
823         l_index     LIKE sy-tabix.
824
   825 * Data source: invoice item non-background
826   IF NOT t_mcrbkey_nbv[] IS INITIAL.
*>>>>>     SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i*
828        ON   ( rmandt = imandt AND
829               rbelnr = ibelnr AND
830               rbuzei = ibuzei AND
831               rcobl_nr = icobl_nr )
832        INTO TABLE t_rbco_nbv
833        FOR ALL ENTRIES IN t_mcrbkey_nbv
834        WHERE r~gjahr = t_mcrbkey_nbv-gjahr AND
835              r~belnr = t_mcrbkey_nbv-belnr.
836   ENDIF.
837 * Data source: invoice item background
838   IF NOT t_mcrbkey_bv[] IS INITIAL.
839     SELECT * FROM rbco AS r LEFT OUTER JOIN rbex AS i
840        ON   ( rmandt = imandt AND
841               rbelnr = ibelnr AND
842               rbuzei = ibuzei AND
843               rcobl_nr = icobl_nr )
844        INTO TABLE t_rbco_bv
845        FOR ALL ENTRIES IN t_mcrbkey_bv
846        WHERE r~gjahr = t_mcrbkey_bv-gjahr AND
Thnks in advance

Issue in Filling set up table

Hi,
I am facing issue while filling the setup table for Quality management datasource.
Error message:
No summarization result is selected,
Message no. MCEX105
Thanks,
Ram

Hi Ram,
I hope you are using the same tcode - Go to Txn OLIQBW
give the Name of run and execute in Background.
I hope you done the same thing, if not please let me know
Regards,
Kiran

Problem about fill set up table

Hi all,
I got a problem when I run the fill set up table for sales billing data source. what I did is:
first delete the setup table then oli9bw->type in a sales document no.(as I only want this order data), then give a run name, last execute, but I got the message as follow:
Data source 2LIS_13_VDITM contains data still to be transferred
Could you pls explain what this means, and what should I do to solve the problem
Thanks

Set up table definition
Setup table is store the historical data, where as the delta records are updated in delta queue not to set up table.
So once historical data is loaded you can delete the contents of the set up table.
name is extract sturcture of your data source + setup
also data is taken from setup table when an init / full/ full repair load is done.
so in order to take ur records from the table delete the setup table(LBWG) and initialize it with ur records.
You can find the contents SE16
Filling set up tables
transac LBWG
+ SBIW -> Logistics -> Managing Transfer Information Structures-> Setup of Statistical Data-> Application-Specific Setup of Statistical Data
set up tables
Set up tables
Set up tables
view of set up tables data in se11??????????
Set Up tables..
lo: delete set up tables: DOUBT
LBWQ is the extraction queue and RSA7 is delta queue. Data is sent to delta queue from extraction queue through collective job scheduled in transaction LBWE.
when we want to extract the data using LO Cockpit, the data will be come to the extraction queue first and from there it will processed to the delta queue. SO lbwq works as a outbound queue.
If the update mode is Unserialised V3 then as soon as the document is posted it comes update table which you can see in Tr. Code SM13. After the jonb is scheduled the records come to RSA7 i.e delta queue from which BW pulls the data
If you use u201CQueued Deltau201Dupdate method then the data moves to Extraction queue(LBWQ). Then run Collective update to move the data from LBWQ into Delta Queue (RSA7). Then schedule the data using the infopackage by selecting Delta Load in the update tab.
So in If you are going to do Setup table filling, delete the data from LBWQ.
The usage of Extraction queue(LBWQ) comes in to picture in delta loading. But actually system starts collecting the data (whenever there is document creation in R/3) after activating the EXtraction structure.
Steps to Be Performed
We know that there are 4 types of delta extraction that are available in LO. If you use u201CQueued Deltau201Dupdate method then the data moves to Extraction queue(LBWQ). Then run Collective update to move the data from LBWQ into Delta Queue (RSA7). Then schedule the data using the infopackage by selecting Delta Load in the update tab.
Here is Roberto's weblog:
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
/people/sap.user72/blog/2004/12/16/logistic-cockpit-delta-mechanism--episode-one-v3-update-the-145serializer146
/people/sap.user72/blog/2005/01/19/logistic-cockpit-delta-mechanism--episode-three-the-new-update-methods
check this out...
LBWQ - T code is for what?
Ttransaction LBWQ
What is LBWQ?
Assign points if it helps
Hope it helps
regards
Bala

Error while filling the set up table for 2LIS_11_VAITM

Dear Experts,
i am facing an error while filling the set up table for 2LIS_11_VAITM in the source system.
The error was "Company code for sales org 9000 does not exist (document 1326)".
when i checked the document in the Header table VBAK,company code was blank for the document .
Company code was there in the selections for the setup table.
The error means that company code should be maintained for the sales document as per my knolwedge.i think document was not created properly in the source system.
Could you please help me out to over come the problem.
Regards,
Sunil...

in the selection screen for filling the setup table, there is a parameter No. tolerated faulty documents
you'll have to enter at least '1' here in your case
it might be that there are other erronuous records, in that case it will crash again, and you'll have to increase the value for this parameter
(under "normal" circumstances, all documents in the source should be correct... but apparently it's possible to circumvent this)

Error while filling set up table for Inventory

Similar Messages

Maybe you are looking for