Error while filling up set up tables in SAP R/3

Experts,
I trying to fill up set up tables for application component 11 (SD) for my LO extraction. It gives me the following error
<b>Error determining rate: foreign curr. RMB local curr. AUD date 06/19/2007 (doc. 100025787)</b>
when I check in RSA3, I have data before 06/19/2007 but nothing is filled up after that.
Does anyone know how to fix this?
Thanks
Ashwin

Hi Ashwin,
Did you get the solution for issue(filling the setup tables for applicaion component 11)
"Error determining rate: foreign curr. RMB local curr. AUD date 06/19/2007 (doc. 100025787)"
thanks in advance.
Bhaskar.

Similar Messages

Error while filling the set up table for 2LIS_11_VAITM

Dear Experts,
i am facing an error while filling the set up table for 2LIS_11_VAITM in the source system.
The error was "Company code for sales org 9000 does not exist (document 1326)".
when i checked the document in the Header table VBAK,company code was blank for the document .
Company code was there in the selections for the setup table.
The error means that company code should be maintained for the sales document as per my knolwedge.i think document was not created properly in the source system.
Could you please help me out to over come the problem.
Regards,
Sunil...

in the selection screen for filling the setup table, there is a parameter No. tolerated faulty documents
you'll have to enter at least '1' here in your case
it might be that there are other erronuous records, in that case it will crash again, and you'll have to increase the value for this parameter
(under "normal" circumstances, all documents in the source should be correct... but apparently it's possible to circumvent this)

Error while filling up the setup table for 2LIS_11_VAITM...

Hi
I am trying to fill the set up table for Application 11since i want to work on data Source enhancement = 2LIS_11_VAITM , but while performing fill set up, I am getting following error:
Error determining rate: foreign curr. INR local curr. USD date 07.01.2002 (doc. 7484)
Pls. let me know how can i exclude this document number in OLI7BW.
Pls. let me know if you have any reply on it.
Thank You....

Hi,
I think there is no option to exclude the documents from the selection. I have a small suggestion,not sure whether it works .There is a field 'No. tolerated faulty documents' .You can enter some no here and try that again. If still you get the problem, ask the functional consultant to correct the document.
Thanks

Error when Filling the set up tables

Hi Friends,
I'm trying to fill 2LIS_03_BF, I think it is not mandatory giving selection criteria rigt!! I have 2 issues here
(1) when I give no selection criteria, no records are getting loaded
(2) When I give the slection criteria , I'm getting a message " Plant 6001 Doesnot exist".
How should I handle this?? I need to fill this extractor, can someone help me,
Thanks in advance,

Smily,
no need to give Selection criteria. may sme other field you are missing (either run name or termination date etc).
No need to fill posting date or document number... it's not mandatory.
all the best.
Regards,
Nagesh Ganisetti.

How to get required fields in the selection screen while filling a set tabl

hai,
i was filling the set up table for 2lis_13_vditm.but while filling the set up table in the selection conditions in the tcode OLI9BW.
I would like to have the a field added in the selection condition which is not existing in the OLI9BW.
kindly help me out of ths.
with regards
soumya.

As far as I know, you're just limited to whatever fields are in the transaction... That applies for any of the setup tables processes.
If you need to limit the data that goes to BW, you can do so by putting the logic in CMOD, EXIT_SAPLRSAP_001, Include ZXRSAU01 for the specific extractor.

Error while filling set up tables for 2LIS_11 data sources

hello All ,
I tried to fill setup tables for 2LIS_11 data sources in OLI7BW , but the job RMCVENUA is getting cancelled. below is the Job Log ,
Job started
Step 001 started (program RMCVNEUA, variant &0000000000005, )
Start of order processing
Error determining rate: foreign curr. local curr. INR date 10.09.2008 (doc. 1)
Job cancelled
Is there any setting required in R3 side before filling setup tables of SD ?
I am able to fill the setup tables for 2LIS_05 ( Notifications) successfully.
Regards ,
Amol Kulkarni
Edited by: Amol Kulkarni on Dec 4, 2008 3:59 AM
Edited by: Amol Kulkarni on Dec 4, 2008 4:00 AM

Hi,
one of the sales document currencies is not maintained properly in the system and therefore its failing.
you need to correct those documents before filling the set up tables.
Either you can chose the option fault document toleration limit to 1000...so that 1000 records wrong records can be tolerated or you have to crrect it first before filling up the set up tables.
This will generally happen in test systems.... but very rare in production...so try to maintain currrency again in the system.
generally you will see the sales doc number in the error for which its failing.
May be at the time of filling some óne was working on some sales document and tried it save it.
correct that doc and fill the set up tables again.
Thanks
Ajeet

Error while filling setup table for 2LIS_03_BF

Hello,
I am getting an error while filling set-up table for 2LIS_03_BF.
Following is the screenshot of the same.
If I check in ST22, I get following,
I could fill the setup table for other datasource 2LIS_03_BX without any problem.
Please suggest.

Hi,
Can you try filling the setup table data for that range in background?
Sometimes because of huge data that you are trying to fill it might through you a dump. So please execute it in background and see if it works?.
But still can't really say what that dump tells from what you attached.
Thanks,
Sathya

Timeout error while filling setup tables

HI all
I am getting timeout error while filling setup tables(OLI1BW).I clicked on execute button on hte screen.Its not scheduled as a background job.
Going through threads i have come to know that to solve this issue
1.BASIS team have to increase backgroung processses or memory
2.run it as a background job.
When I went to Program->Executein the backgroundPrint background parameters window has popped up.
What to do in there?I am afraid if I include parameters like printer name....what is it and how long is it going to print?
Please let me know.
Thanks,
Harika.

thanks for the reply.
it was set to LOCL only.
But i have 3 options in the dropdown windowsprinter :Send to onenote2007
Microsoft XPS document writer
OUrprinteraddress
WHich one to choose here?
Edited by: harikag on Aug 10, 2011 8:47 AM

Error while filling setup tables for 2lis_13_vahdr

Dear friends,
I am getting below Error while filling setup tables for 2lis_13_vahdr.
More faulty documents found than the tolerated 0000000000
Message no. M2222
Can any one guide me how to address this issue.
Thanks and Regards
Nithya

Hello Nithya,
It seems the No of tolerated faulty documents that you have given is 0. So when you initialize try to these.
While executing OLI*BW including a value in the maintain "No. tolerated faulty documents" - 5000 or 10000.
Then execute the program in background.
Once the job is completed check the background job log if any errors.
Thanks
Chandran

Error while filling setup table for Sales

Dear Team,
We are getting following error while filling setup table for Sales (application component 11) and for Billing (application component 13),
application component 11
Error determining rate: foreign curr. local curr. INR date 08.10.2007 (doc. 673624) (JOB - RMCVNEUA)
Message No M2810
application component 13
Billing document 480050000: error determining stats. currency rate (no updating)
More faulty documents found than the tolerated 0000000000 (JOB - RMCVNEUF)
I have seen lot of threads based on this but all r showing diffrenent currency to INR but for the above mentioned documents currency is in INR only so why it is showing the error I am not able to determine.
If anybody faced this problem kindly reply to this.
Best Regards,
SG

Hi There,
Might be your using a wrong document number.
I mean if your using the 11 you should use only Sales document number and for 13 you should only use billing document number.
If you use vice versa that error will throw.
Regards,
MQ

Error while deriving the currency from table T001P.

Hi Friends,
I am trying to run payroll for NZ using schema NZ00 but i am getting an error stating "Error while deriving the currency from table T001P. Error during initialization of Payroll"
I have checked V_T001P, V_T001 and have deleted the personnel area and subarea and again created it but still i am unable to solve this problem.
Could you please help me as to where this error can be corrected.
Thanks,
Manj

About the incidence, the problem might be related to the links between
personnel area, company code and currency set up (table T001P, T500P and
T001).
Please check the following points:
1- Have you assigned the Personnel area to the Company code under SPRO -
IMG -> Enterprise Structure -> Assignment -> Human Resource Management
-> Assignment of Personnel Area to Company Code.
2- SPRO -> Personnel Management -> Personnel Admin -> Basic Settings ->
Determine Currencies (Public Sector Currency Need to be maintained along
with the other node).
3- SPRO- Personnel Management -> Personnel Admin -> Payroll Data ->
Basic Pay -> Define Hourly Rates for several decimal places. (Please
maintain all the nodes).
4- Maintaining the table t500c through transaction code OE00.
Regards
Ramana

Fatal error while filling connection pool

I was not getting a connection to an Oracle database and I was getting the following error in cms.log: "FATAL Connector - Unable to create connection pool for T_Orbis_Oracle: Fatal error while filling connection pool for jdbc:oracle:thin:@MESDB:1521:ASPENB21" where T_Orbis_Oracle is the xMII link name and the database ASPENB21 is on server MESDB. I changed the database username in the link to SYSTEM and I then got a connection and a Created Connection pool message in the log. I then changed back to the username which originally was giving the error and it now also gave me a successful connection. I am now worried that there is an issue in the background which is gradually building up and will begin to fail again as previously. Can anyone explain what is causing this problem and suggest how I can correct it? Thanks, John.

John,
Check you have installed the JDBC driver ojdbc14.jar (works for both 9 and 10).
Also check the server package:
MII 11.x--->ServerPackage com.lighthammer.Illuminator.connectors.IDBC
MII 12.x--->com.sap.xmii.Illuminator.connectors.IDBC
Carefull when you set up the string because some oracle databases have servicenames instead of SID, and the url was different if you use them instead of the SID.
For services names the url is jdbc:oracle:thin@host:port:SID
Also check your Network firewall between MII and DB and ports too.
Oracle9i installs with a number of default accounts.You must unlock all other accounts before using them. Oracle recommends changing all user passwords immediately after installation.
-Suresh
Edited by: Suresh Hiremath on Jul 29, 2009 8:20 AM

Informix: Error while trying to set up start or end key for index read

Hi all
Im moving an application from weblogic 6.1 to 8.1, we're using informix as our databasemanager and are using informix's XA driver. However im running into the following error:
SQL State: IX000, Exception: java.sql.SQLException: [Internal] Error while trying to set up start or end key for index read [fmstopset_release],
SQL ErrorCode: -9847, Error Message: [Internal] Error while trying to set up start or end key for index read [fmstopset_release], RSAM ErrorCode: -101
...while accessing a table.
The same code runs fine twice, but the third and following times it fails with the above error code. I've tried setting the various XA flags available in the weblogic console but with no success so far.
Anyone have any input to this problem? Ive not seen many postings about this error out in the cyberspace and the fews ive seen never gets any response...so i just have to hope anyone in here know anything about it.
Best regards
JM

Ulf Akerberg wrote:
Hello
I managed to work around my problem by setting the "statement cache size" in the jdbc connection pool to 0. At least that seems to be a work around, im not fully happy with it.
I attach the stack trace from the exception, perhaps it will give someone an idea.
Btw, we're using sun.jdbc.rowset.ExtendedCachedRowSet to populate the resultset to a "disconnected resultset" which the application works with instead of the resultset. Any statements and resultsets that are created are closed before returning the ExtendedCachedRowSet to the application.
If the application works when statement caching is turned off, then it implies a bug in the
informix driver to do with re-using a prepared statement. Is the PreparedStatement used
the same way each time? (the one at AbstractDAO.java:166) What I mean to ask is, If/when
this statement is created with a given SQL string, are the parameters for that SQL always
set the same way?
thanks,
Joe
>
2004-09-10 15:45:05,603 ERROR [ExecuteThread: '14' for queue: 'weblogic.kernel.Default'] - SQLException: Generic SQL failed:
SELECT d.*,dt.dokument_typ FROM dokument d, OUTER dokument_typ dt WHERE d.dok_typ_id = dt.dok_typ_id AND d.dokument_id = ? ( 0:894),
SQL State: IX000, Exception: java.sql.SQLException: [Internal] Error while trying to set up start or end key for index read [fmstopset_release],
SQL ErrorCode: -9847, Error Message: [Internal] Error while trying to set up start or end key for index read [fmstopset_release], RSAM ErrorCode: -101
java.sql.SQLException: [Internal] Error while trying to set up start or end key for index read [fmstopset_release]
     at com.informix.jdbc.IfxSqli.addException(IfxSqli.java:3105)
     at com.informix.jdbc.IfxSqli.receiveError(IfxSqli.java:3419)
     at com.informix.jdbc.IfxSqli.dispatchMsg(IfxSqli.java:2282)
     at com.informix.jdbcx.IfxXASqli.receiveMessage(IfxXASqli.java:119)
     at com.informix.jdbc.IfxSqli.sendStatementQuery(IfxSqli.java:1464)
     at com.informix.jdbc.IfxSqli.executeStatementQuery(IfxSqli.java:1403)
     at com.informix.jdbc.IfxSqli.executeStatementQuery(IfxSqli.java:1333)
     at com.informix.jdbc.IfxResultSet.executeQuery(IfxResultSet.java:223)
     at com.informix.jdbc.IfxStatement.executeQueryImpl(IfxStatement.java:843)
     at com.informix.jdbc.IfxPreparedStatement.executeQuery(IfxPreparedStatement.java:244)
     at weblogic.jdbc.wrapper.PreparedStatement.executeQuery(PreparedStatement.java:80)
     at infrastructure.dao.AbstractDAO.genericSqlRead(AbstractDAO.java:166)
     at se.migrationsverket.dhs.domain.dao.DokumentDAO.findByDokId(DokumentDAO.java:64)
     at se.migrationsverket.dhs.domain.dao.DokumentDAO.findByDokId(DokumentDAO.java:43)
     at se.migrationsverket.dhs.generator.impl.pipeline.LoadDocumentPipeline.buildMultiDocument(LoadDocumentPipeline.java:99)
     at se.migrationsverket.dhs.generator.impl.pipeline.LoadDocumentPipeline.process(LoadDocumentPipeline.java:53)
     at se.migrationsverket.dhs.generator.impl.DHSDocumentGenerator.loadDocument(DHSDocumentGenerator.java:63)
     at se.migrationsverket.dhs.generator.DocumentGeneratorInternalHelper.loadDocument(DocumentGeneratorInternalHelper.java:129)
     at se.migrationsverket.dhs.services.document.internal.InternalDocumentManagerBean.loadDocument(InternalDocumentManagerBean.java:185)
     at se.migrationsverket.dhs.services.document.internal.InternalDocumentManager_6sz7e8_EOImpl.loadDocument(InternalDocumentManager_6sz7e8_EOImpl.java:532)
     at se.migrationsverket.dhs.action.documentgenerator.GeneratorAction.load(GeneratorAction.java:147)
     at se.migrationsverket.dhs.action.documentgenerator.GeneratorAction.perform(GeneratorAction.java:49)
     at se.migrationsverket.dhs.servlet.AbstractController.doPost(AbstractController.java:84)
     at se.migrationsverket.dhs.servlet.AbstractController.doGet(AbstractController.java:54)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run(ServletStubImpl.java:1053)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:387)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:305)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:6310)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:3622)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:2569)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Regards
JM

Filling the set up tables

Filling the set up tables
I am mentioning here the run name, Termination date & time ( time how many minutes I have to increase is it like that for these many records these much time we have to mention) I say execute ,it is giving me the error
Error determining rate foreign currency INR local currency
Eur date 02.01.1997(doc 4969)
What I should do to solve this
what I did is I specified the doc no from 33 to 4968
& executed then it is asking for archive session, what is this archive session & is it mandatory to specify the archive value ,if so what value I should specify in that
Thanks in advance

Hi,
<i>Error determining rate foreign currency INR local currency
Eur date 02.01.1997(doc 4969)</i>
Here the Curency conversion factor maybe missed in R/3 .Show this error to your FI functional peoople to slove this.
With rgds,
Anil Kumar Sharma .P

Filling of set up tables for several company codes

hi
i am filling a set up table for the application specific inventory control statistical data. But while setting up data filling selection parameters contains selection parameters for the single Company code.
But in my scenarios there are several company codes whose data resides in the R/3 and i need to bring data for all company codes in the set up table.
so now filling up the data in set up table, shall i have to fill up data for individual company code, OR i have to fill data for one company only and on delta load data pertainig to other company codes will be populated to the set up tables.
kindly give ur expert advice in this situation.

Hello,
i dont understand why should it be mandatory to fill the company code on r/3 side while initialisation!!
But even if it is mandatory, u have to do one by one init runs on R/3 side for all company codes that you need.
Check in rsa3 for records after the init runs.
If it was not mandatory, u could have run the setup(init) run on r/3 side for all company codes at a time by keeping the field blank!!
Also again in the BW side you can have company code for selection in the infopakage!! there u can also have it as a range rather than running for one at a time.
Hope it is helpful now..
regards,

Error while filling up set up tables in SAP R/3

Similar Messages

Maybe you are looking for