Error while generating material classification data source in R/3

Hi,
I am trying to generate the data source for material classification in R/3.
I have created the data source entry in CTBW and added the classification fields required for the data source. But while generating the data source i am getting an error, which says "BW Metadata is incomplete".
Is there any step, that i have missed? Please advise what needs to be done.
Thanks,
Manoj

Hi Santhosh,
The note seems to be quite old and may not be applicable since we are on the latest support pack.
We are using two different clients, one for configuration and the other for test data.
Thanks,
Manoj

Similar Messages

Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.

Hi, We recently started getting these errors a couple times a day. There are 12 of them in total. We also have exactly 12 subscriptions. Does this indicate some db issue causing all of these
to fail?
Alert subscription data source module encountered errors while running: Alert subscription data source module was unable to find alerts that match the subscription because of database errors.
The following error(s) were encountered:
Exception Message: ExecuteScalar requires an open and available Connection. The connection's current state is closed.
One or more workflows were affected by this.
Workflow name: Subscription8b108a3e_4e3d_4fd0_b67e_cbfc21cd10b8
Instance name: Alert Notification Subscription Server
Instance ID: {E07E3FAB-53BC-BC14-1634-5A6E949F9230}
Management group: A Company Management Group
Thanks Lance

Hi,
Do you have hotfixes applied?
http://blogs.technet.com/kevinholman/archive/2009/01/27/which-hotfixes-should-i-apply.aspx
Also, I found a relevant thread for your reference.
Alert subscription data source module encountered errors while running</u1:p>
http://social.technet.microsoft.com/Forums/systemcenter/en-US/50557249-7f97-4b67-9729-f7088202385b/alert-subscription-data-source-module-encountered-errors-while-running?forum=operationsmanagergeneral</u1:p>
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Runtime error while creating material master data

hello sir,
i am facing one prolem while creating MATERIAL MASTER DATA.
AFTER GIVING ALL REQUIRED INFORMATION WHEN I AM GOING TO SAVE THE DOCUMENT ITS SHOWING ABAP RUNTIME ERROR.
MESSAGE TYPE: - MDS_KEYMAP.
MESSAGE CLASS: 001.
PLEASE TELL ME WHAT TO DO?
REGARDS..

SIR THANK YOU FOR YOUR REPLY.
I ALREADY DONE THAT DUMP ANALYSIS.
SO PLEASE KINDLY GIVE ME IN DETAILS ABOUT THAT SOLUTION...

Error While Creating Material Classification Characteristic DataSource -

Hi All,
    I am creating the Material Classification DataSource 1CL_OMAT001 with CTBW in R/3 with the following info:
Basis DataSource = 0MATERIAL_ATTR; Client = 200; Class Type = 001;
Obj table = MARA; DataSource Type = ATTR, DataSource = 1CL_OMAT001
I have added all the characteristics with 'New Entries' button and the following are the details after saving it:
   DataSource = 1CL_OMAT001
   Characteristic Name = ABCDXYZ
   Item No =   '    ' (blank)
   Maintain Status = N
   Characteristic = 1CL_AABC001
   Typ = CHA
   While adding the MATERIAL_GROUP as characteristic it got an error because of Reference Characteristic since it is reference to Table MARA. Finally, I didn't add it.
   When I click the 'Generate' button to generate the DataSource then it is giving the error of <b>'BW Metada is incomplete'</b> (CLBW008).
   What is wrong with it and how could I fix this problem, please ?
   Thanks in advance.

I am not too sure but this might be the cause of error. Data doesn't need to be in client 100, but the characteristic needs to be defined in the class if I remember it correctly.
To do a quick check, open report program RCLBW_STRUCTURE_GEN in SE38, there is a call to FM RSA1_SINGLE_OLTPSOURCE_GET (around line 169) put a breakpoint there in the editor (display).
Now run your CTBW generation, it should stop at the breakpoint. You should check the value of field GT_CLBW_SOURCES-IOBJNM in the debugger - it would likely be the characteristic name.
Now, go to SE37, do a single test of FM RSA1_SINGLE_OLTPSOURCE_GET, and specify this same value for field I_OLTPSOURCE and execute. You will likely get a sy-subrc of non-zero.
Repeat this in client 200, check sy-subrc.
If you are getting sy-subrc 0 in 200 and non-zero in 100; you will either need to create the classification in 100, or generate it in 200.
If this doesn't work, let us know.

Error While Creating The Generic Data Source.

Hi Gurus,
I am trying to create a Generic Data Source (ZGG_TEST) on a View (ZV_TEST1)
View as Follows:
Table1 has the Following Fields
Field Type
MANDT CLNT
RECNO NUMC
STATUS CHAR
LMODF CHAR
Table2 has Fields
Fields Type
MANDT CLNT
RECNO NUMC
PHCOS QUAN
MATNR CHAR
EQSFS QUAN
MEINS UNIT
In Table2 under Currency and Quantity Field tab
For Field PHCOS The Reference table is MSEG and Reference Field is MEINS
For Field EQSFS the Reference Table is MSEG and reference field is MEINS
View Description
Tables:
Table1
Table2
MSEG
Join condition For the View is
TABLE2-MANDT=TABLE1-MANDT
TABLE2-RECNO=TABLE1-RECNO
TABLE2-MANDT=MSEG-MANDT
TABLE2-MATNR=MSEG-MATNR
The Problem is While saving the Data Source it is Giving an Error as Follows
Invalid extract structure template ZV_TEST1 of DataSource zgg_test
Message no. R8359
Diagnosis
You tried to generate an extract structure with the template structure zgg_test. This operation failed, because the template structure quantity fields or currency fields, for example, field PHCOS refer to a different table.
Procedure
Use the template structure to create a view or DDIC structure that does not contain the inadmissible fields.
Please help me In Solving this Issue
Thanks in advance
Santosh

n Table2 under Currency and Quantity Field tab
For Field PHCOS The change Reference table to TABLE2 For Field EQSFS the change the Reference Table to TABLE2
ref field MEINS ...
This works ..
Priya
Edited by: Priya on Dec 31, 2007 1:30 PM

Getting 401 error while creating a Report Data Source with MOSS 2010 Foundation

I have setup SQL Server 2008 R2 Reporting Services with SharePoint 2010 Foundation in SharePoint integrated mode. SharePoint Foundation is in machine 1 whereas SQL Server 2008 R2 and SSRS Report Server are in machine 2. While configuring Reporting
Services - Sharepoint integration, I have used Authentication Mode as "Windows Authentication" (I need to use Kerberos).
My objective is to setup a Data Connection Library, a Report Model Library, and a Reports Library so that I can upload a Report Data Source, some SMDLs, and a few Reports onto their respective libraries.
While creating the top level site, "Business Intelligence Center" was not available for template selection since SharePoint Foundation is being used. I therefore selected "Blank Site" as the template.
While creating a SharePoint Site under the top level site, for template selection I again had to select "Blank Site".
I then proceeded to create a library for the data connection. Towards this, I created a new document library and selected "Basic page" as the document template. I then went to Library Settings for this newly created library and clicked on
Advanced Settings. In the Advanced Settings page, for "Allow management of content types?" I selected "Yes". Then I clicked on "Add from existing content types" and selected "Report Data Source". I deleted the existing
"Document" content type for this library.
Now I wanted to created a Data Connection in the above Data Connection library. For this when I clicked on "New Document" under "Documents" of "Library Tools" and selected "Report Data Source", I got the error "The
request failed with HTTP status
401: Unauthorized.".
Can anybody tell me why I am getting this error?
Note: I have created the site and the library using SharePoint Admin account.

Hi,
Thank you for your detailed description. According to the description, I noticed that the report server was not part of the
SharePoint farm. Add the report server to the
SharePoint farm and see how it works.
To join a report server to a SharePoint farm, the report server must be installed on a computer that has an instance of a SharePoint product or technology. You can install the report server before or after installing the SharePoint product
or technology instance.
More information, see
http://msdn.microsoft.com/en-us/library/bb283190.aspx
Thanks.
Tracy Cai
TechNet Community Support

Error while generating webservices using Date

I am facing the following problem while generating a web service which is having Date as one its members.
I have serialized a class with the following DataStructure
private String rowId1;
private Date created;
private String name;
private String quoteNum;
private String revNum;
private String curcyCd;
private String activeFlg;
private Number discntAmt;
private Number discntPercent;
When i tried to expose this as webservice, If I use the class oracle.jbo.domain.Date for Date type, the webservice is not generated properly. It is not including the method which contains this call. ie) This method is not present in the WSDL file as well as in the proxy.
When I used java.util.Date instead of oracle.jbo.domain.Date, I am able to expose the method and webservice got generated properly. But When i tried to generate the proxy for the WSDL in the consumer, I go the following error.
oracle.jdeveloper.webservices.model.GenerationException: Proxy generation failed for the following reason:
     at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.doGeneration(ProxyGenerator.java:608)
     at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.generateImpl(ProxyGenerator.java:365)
     at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.mav$generateImpl(ProxyGenerator.java:77)
     at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator$1ThrowingRunnable.run(ProxyGenerator.java:206)
     at oracle.jdeveloper.webservices.model.GeneratorUI$GeneratorAction.run(GeneratorUI.java:446)
     at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:551)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.RuntimeException: generator error: no encoder for type "{http://www.w3.org/2001/XMLSchema}dateTime" and Java type "java.lang.String"
     at oracle.j2ee.ws.common.processor.Processor.runActions(Processor.java:105)
     at oracle.j2ee.ws.tools.wsa.AssemblerTool.run(AssemblerTool.java:99)
     at oracle.j2ee.ws.tools.wsa.WsdlToJavaTool.createProxy(WsdlToJavaTool.java:354)
     at oracle.j2ee.ws.tools.wsa.Util.createProxy(Util.java:838)
     at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.doGeneration(ProxyGenerator.java:549)
     ... 6 more
Caused by: generator error: no encoder for type "{http://www.w3.org/2001/XMLSchema}dateTime" and Java type "java.lang.String"
     at oracle.j2ee.ws.common.processor.generator.GeneratorBase.doGeneration(GeneratorBase.java:181)
     at oracle.j2ee.ws.common.processor.generator.GeneratorBase.perform(GeneratorBase.java:137)
     at oracle.j2ee.ws.common.processor.Processor.runActions(Processor.java:97)
     ... 10 more
I am referring to "Entity and view objects based on web service " in the following URL
http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html#93
Thanks and Regards,
James

Hi all,
I have applied the consolidated JRI fixes - patch 17191279 .
Then, when generating Jar, received keypass is tampered error.
re-generated the key using $ adjkey -initialize.
Now, its working fine.
Regards,
Krish.

Error while reporting on Excel Data source

Hello OBIEE Experts,
I have created a rpd based on excel datasheet.
Record counts are updated and when I try to retrieve records on Physical layer, sometimes I can view records and sometimes the following error message is displayed:
[nQSError: 16001] ODBC error state: S0002 code: - 1305 message: [Microsoft][ODBC Excel Driver] The Microsoft Jet database engine could not find the object 'Hospital'. Make sure the object exists and that you spell its name and patha name correctly..
[nQSError: 16002] Cannot obtain nuber of columns for the query result
While creating the report on BI Answers getting the below error:
View Display Error
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S0002 code: -1305 message: [Microsoft][ODBC Excel Driver] The Microsoft Jet database engine could not find the object 'Sales'. Make sure the object exists and that you spell its name and the path name correctly.. [nQSError: 16002] Cannot obtain number of columns for the query result. (HY000)
SQL Issued: SELECT Sales.Site saw_0, Sales."Pt# Identifier" saw_1, Sales."Q1 Charges" saw_2 FROM HosNew ORDER BY saw_0, saw_1, saw_2
Here, HosNew is the subject area name. I don't have any password for Administrator user. The Password is <blank>. Connection pool uses Call interface: ODBC 3.5
Please help in solving this.
Thanks.

hi,
Try replicating the data source again.
After that go to RSDS x-action there give the data source name and source system name and do restore and activations from there .
After check if you were able to create x-fer rules first.
Thanks
Mukesh

Error while generating xml file Data Model

Hi ,
I am creating data mode in OBIEE through the query builder and trying to generate xml from it but the following exception occurs while generating the XML
"The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
The following tags were not closed: DATA_DS. Error processing resource 'http://localhost:7002/xmlpserver/servlet/xdo'. "
Could you please sort this out.
Thanks
Govindan P

Hi,
I found the issue and corrected it. :)
This was happened only because of the Version problem of Report Builder with Oracle Applications.
Reports Builder 10g is not compatiblie with Oracle Applications 11.5.10.
Oracle 11.5+ will always expect the RDF from Reports 6i version. Because of this, the endocing was damaged.
You can observe in the earlier post as encoding="&Endoding". Here +&Encoding should be replaced by some encoding mechanism like "UTF-8".+
Finally corrected the version and got the Output as expected.
Thanks !

Error while loading material master data

I am loading delta data for material master and its giving me the following error:
"Programs not generated for InfoSource 0MATERIAL_ATTR and source system".
How to resolve this error?
Need ur help urgently.
Thanks

Hi,
While loading attributes U have to select the transfer structure of the 0MATERIAL_ATTR then activate it..now proceed if it is already replicated in to BW system... other wise first do that..then go ahead....Similar to Text also...
Regards
Siddhu

Updation error while using a foreign data source

Hi All,
I am trying to connect to SQL server 2000, from my BC4J driven swing application. i am using Oracle containers for Java (Development Suite)
Going by the steps detailed in
"SQL Server Walkthrough" on OTN, i have tested with two drivers:
1) Microsoft SQL Server 2000 JDBC driver
2) DataDirect JDBC driver.
In both the cases, the resulting application runs well for inserts and deletes, but FAILS WHILE UPDATION.
The following error is displayed while using the datadirect for updates.
(oracle.jbo.DMLException) JBO-26041: Failed to post data to database during "Update": SQL Statement " UPDATE dbo.BR_CATEGORY BrCategory SET CATEGORY_NAME=? WHERE CATEGORY_CODE=?".
----- LEVEL 1: DETAIL 0 -----
(java.sql.SQLException) [DataDirect][SQLServer JDBC Driver][SQLServer]Line 1: Incorrect syntax near 'BrCategory'.
A similar errror is displayed for the Microsoft JDBC driver as well.
What could be the cause?
Thanks,
Sumit

Thanks Deepak,
I am not using Northwind and Pubs sample databases. So that rules out the change in ownership from dbo to our SQL login account.
I am quoting the last paragraph in the document:
"To be able to browse in the tester, make sure you add a driver class to the configuration and choose this local configuration in the tester. However you will not be able to update without errors and this is a known issue. For step-by-step instructions, see the SQL Server Walkthrough topic."
What bothers me is this line:
"However you will not be able to update without errors and this is a known issue"
Are we talking about updation in general, or just updation through BC4J tester. I am using a separate Swing-Jclient application to access the application module.
Thanks in advance,
Sumit Kumar Pal

Problem while generating classification data-sources

Hi ,
I have one classification data-source 1CL_OVEN001 which is based on vendor master data and class type 10. I tried to added one field in this data-source . while generating data-source, I got some error like " Extractor can not be generated".
Then I searched on SAP site and got one note 1946309 . When I implemented this note and tried to generated data-source. Now I am getting another error.
"EXTRACT STRUCTURE IS NOT PERMITTED"
I have tried with several note but getting same error.
Please help.
Thanks in advance
Devesh Varshney

Hi,
What field you have added, if it is Keyfigure then make sure that you have added its unit.
-Sriram

Error while generating Data provider

We are facing a weird issue while using Design Studio 1.2. Locally the tool works fine but when we use it from BI-Launchpad or through BI Enterprise it gives intermittent error "Error while generating Data Provider"
Same setup works fine in our Validation Environment.
We have tried running repair for Design Studio, redeploy the war files, creating new view but issue still exist.
We have BI 4.0 SP7 installed on Windows 2008 R2 system.
4 CMS running in cluster, Design Studio 1.2 is installed on 3 Nodes out of 4.
For now we are using 1 tomcat to access the system to narrow down the issue.
Experts please help us to resolve this issue.
Attach is the error message we are receiving

I am not clear what your data source is, but I recommend checking the PAM https://websmp102.sap-ag.de/~sapidb/011000358700001013822013E because there are some limitations with Design Studio and BI4.0

Error while generating screens in BDT

Hi All,
I getting following error while generating screens using t-code BUSP for a CAA2 t-code
"Client 040 appl.object REWB screen REWB10:Error during subscreen container gener
Message no. R11520
Diagnosis
Errors have occurred during screen generation. The reasons for this could be:
The maximum length of the screen was exceeded. There may be no more than 199 lines per subscreen container.
The maximum number of lines for the header-data area was exceeded. There may be no more than 15 lines in the header-data section.
Procedure
Check both of these potential sources of errors in the relevant screen, and make the necessary changes.
Could some body help me in this regards?
with regards,
Sumanth

Hi,
For a dynpro there are 199 Lines available for screen elements and on the average the restriction of 10 views per section and 10 sections per screen. Just check this.
Thanks and warm regards,
Smita.

Error while generating the Document... Bursting Status Report

Hey all,
I am getting some errors in a production environment when trying to burst out some invoice data.
This process has been pretty robust and out of 1000+ invoices a day, I can only find 4 that are failing regularily.
Why am I mentioning?, just to show that I am thinking this is a data issue, but just cannot see anything that stands out.
I can take the xml output and run it through my development suite on my local machine and all runs fine.
Just when it is running live through the db is when it fails.
Here is the Bursting output that shows the error....
<?xml version="1.0" encoding="UTF-8"?>
<BURS_REPORT>
<REQUESTID>27044820</REQUESTID>
<PARENT_REQUESTID>27044726</PARENT_REQUESTID>
<REPORT_DESC>Invoice Print Selected Invoices</REPORT_DESC>
<OUTPUT_FILE>[$OUT_DIR]/o27044820.zip</OUTPUT_FILE>
<DOCUMENT_STATUS>
<KEY></KEY>
<OUTPUT_TYPE>pdf</OUTPUT_TYPE>
<DELIVERY></DELIVERY>
<OUTPUT></OUTPUT>
<STATUS>fail</STATUS>
<LOG>Error while generating the Document...</LOG>
</DOCUMENT_STATUS>
</BURS_REPORT>
The problem is that this output doesn't necessarily help, nor can I find any hints in the OPP logs.
So... the question becomes...
Any ideas on where I can look to resolve this issue?+
Or where I can find any clues at, that would possible point at the issue?+
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
BI Publisher 5.6.3
Thanks
Hayden,

Tim,
Thanks for the suggestion, always seems to slip my mind that the Bursting Report has debug on it.
As far as what is generating the XML, it is oracle's standard, only slightly modified ... ;), invoice generating report, RAXINV_SEL.
Well RAXINV_SEL, or RAXINV_NEW, doesn't matter, same code, that is the executable.
I have turned on the debug, for both the source xml and the burst request, and unfortunately, still nothing stands out to me.
I was really expecting to see something in the burst log, pasted at the bottom...
but, it yet avoids me.
If I had to guess, I would bet the user went, in our terminology, "slashwit crazy", or example "model /w options", in some description.
But can't seem to find which field it is blowing up on, since we are catching these special characters in several places already, and slashwit is littered throughout the output.
I was also looking in the bursting control file for the special xml tags identified there, as those would require no slashes. But those are all clean.
Hayden,
XML Publisher: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOBURSTREP module: XML Publisher Report Bursting Program
Current system time is 21-SEP-2009 10:43:12
XML/BI Publisher Version : 5.6.3
Request ID: 27048106
All Parameters: ReportRequestID=27044726:DebugFlag=Y
Report Req ID: 27044726
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:{node}
Preparing parameters
null output =/u007/app/applmgr/{instance}/out/{instance}/o27048106.out
inputfilename =/u007/app/applmgr/{instance}/out/{instance}/o27044726.out
Data XML File:/u007/app/applmgr/{instance}/out/{instance}/o27044726.out
Set Bursting parameters..
Temp. Directory:/u007/app/applmgr/{instance}/temp
[092109_104315337][][STATEMENT] Oracle XML Parser version ::: Oracle XDK Java 9.0.4.0.0 Production
[092109_104315340][][STATEMENT] setOAProperties called..
Bursting propertes.....
{burstng-source=EBS, font.Free 3 of 9.normal.normal=truetype./usr/java/jre/lib/fonts/FREE3OF9.TTF, font.Times New Roman.normal.normal=truetype./usr/java/jre/lib/fonts/TIMES.TTF, system-temp-dir=/u007/app/applmgr/{instance}/temp, font.Arial.italic.normal=truetype./usr/java/jre/lib/fonts/ARIALI.TTF, user-variable:cp:parent_request_id=27044726, user-variable:cp:application_short_name=XDO, font.Courier New.normal.bold=truetype./usr/java/jre/lib/fonts/COURBD.TTF, font.Times New Roman.normal.bold=truetype./usr/java/jre/lib/fonts/TIMESBD.TTF, user-variable:cp:request_id=27048106, font.Arial.normal.normal=truetype./usr/java/jre/lib/fonts/ARIAL.TTF, font.Courier New.normal.normal=truetype./usr/java/jre/lib/fonts/COUR.TTF, user-variable.OA_MEDIA=http://diierp.corio.com:8002/OA_MEDIA, font.Courier New.italic.bold=truetype./usr/java/jre/lib/fonts/COURBI.TTF, user-variable:cp:org_id=83, user-variable:cp:DebugFlag=Y, font.Times New Roman.italic.bold=truetype./usr/java/jre/lib/fonts/TIMESBI.TTF, user-variable:cp:responsibility=51270, font.Arial.italic.bold=truetype./usr/java/jre/lib/fonts/ARIALBI.TTF, font.Courier New.italic.normal=truetype./usr/java/jre/lib/fonts/COURI.TTF, user-variable:cp:user=HAYDEN, user-variable:cp:reportdescription=Invoice Print Selected Invoices, user-variable:cp:language=en, font.Times New Roman.italic.normal=truetype./usr/java/jre/lib/fonts/TIMESI.TTF, user-variable:cp:ReportRequestID=27044726, user-variable:cp:locale=en-US, user-variable:cp:territory=US, font.Arial.normal.bold=truetype./usr/java/jre/lib/fonts/ARIALBD.TTF}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 27048106 on node {node} at 21-SEP-2009 10:43:19.
Post-processing of request 27048106 completed at 21-SEP-2009 10:43:20.
Finished executing request completion options.
Concurrent request completed
Current system time is 21-SEP-2009 10:43:20
---------------------------------------------------------------------------

Error while generating material classification data source in R/3

Similar Messages

Maybe you are looking for