Error while generating report using BI 2013

Hi
When i am trying to generate a report from the application, On CMC i get this error "Destination disabled. [CrystalEnterprise.DiskUnmanaged]: []. Please note the name of the job server used for your request and contact your system administrator to make sure the specified destination is enabled. (FWB 00031)". Please help.

This specifically means that the destinations have not been configured in the Crystal Job Server. If you're running 4.x, this may be part of the "Adaptive Job Server" instead of or in addition to a Crystal Job Server. If you're using 3.1 or earlier, you'll also have to set up the destination in the Destination Job Server.
You'll have to log in to the CMC, go to Servers, right-click on the correct job server and go to "Destinations". You'll then add something like "File" or "Unmanaged Disk" to the available destinations and save. Stop the job server, start it again, and your error should go away.
Please be aware that unless you're using specific credentials to schedule the report or you're saving to the server where BO is installed, you'll need to make sure that the BO services are running under a network "Services" account that has access to the folder you're scheduling the report to. By default during installation it's set to run under the "Local Services" account that doesn't have access to the network.
-Dell

Similar Messages

Error while generating report in RAR

Hello,
We are getting error while generating reports in RAR.
RAR runs sucessfully, can see there are risk, but we cannot dowload those file, usally we use to get zip file.
or cannot see details ,
gives error cannt be displayed.
Thanks,
DK

Hello,
we had same issues, this happed because the disk was full.
Please check with your basis team if the disk is full.
Thanks,
Prasant

FREC Error while Generating Reports in Quality Center

Hi,
We usually generate reports using Dashboard module of Quality Center . While generating reports on a particular PC, we are getting the following error.
The SQL Query <sheet1> has failed to run, with the following error:
Returned Result is not valid FREC.
We are able to generate the same report on a different PC.
Does anyone encounter this issue earlier? Could someone help us out in solving this issue.

Issue popped up with me a few times and seemingly uncontrolled.
I resolved one query with replacing quotes in the string i.e. replace single with double by replace([field],chr(39),chr(34))

Error while generating JAR using adadmin

Hi all,
EBS Version: R12.1.1
I am in the middle of migrating the EBS from windows 2003-32bit to Linux 5-64Bit.
I am getting the below error while generating the JAR files using adadmin.
Error generated in adadmin
Signing product JAR files in JAVA_TOP -
/u01/appltest/TEST/apps/apps_st/comn/java/classes
   using entity TEST_vm1213l and certificate 1.
Successfully created javaVersionFile.
Generating product JAR files in JAVA_TOP -
/u01/appltest/TEST/apps/apps_st/comn/java/classes with command:
adjava -mx512m -nojit oracle.apps.ad.jri.adjmx @/u01/appltest/TEST/apps/apps_st/appl/admin/TEST/out/genjars.cmd
Failed to generate product JAR files in JAVA_TOP -
   /u01/appltest/TEST/apps/apps_st/comn/java/classes.
adogjf() Unable to generate jar files under JAVA_TOP
Backing up restart files, if any......Done.
You should check the file
/u01/appltest/TEST/apps/apps_st/appl/admin/TEST/log/gen_jar.log
for errors.
Entries from gen_jar.log
Reading language information from applUS.txt ...
Temporarily resetting CLASSPATH to:
"/u01/appltest/TEST/apps/apps_st/appl/ad/12.0.0/java/adjava.zip:/u01/appltest/TEST/apps/tech_st/10.1.3/appsutil/jdk/lib/dt.jar:/u01/appltest/TEST/apps/tech_st/10.1.3/appsutil/jdk/lib/tools.jar:/u01/appltest/TEST/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/rt.jar:/u01/appltest/TEST/apps/apps_st/comn/java/lib/appsborg.zip:/u01/appltest/TEST/apps/tech_st/10.1.2/forms/java:/u01/appltest/TEST/apps/tech_st/10.1.2/forms/java/frmall.jar:/u01/appltest/TEST/apps/tech_st/10.1.2/jlib/ewt3.jar:/u01/appltest/TEST/apps/tech_st/10.1.2/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/appltest/TEST/apps/apps_st/comn/java/classes"
Calling /u01/appltest/TEST/apps/tech_st/10.1.3/appsutil/jdk/jre/bin/java ...
The JDK version is 1.6.0_10
Validating the files/directories specified for -areas option
ERROR: File/directory 61A9A14779A1A8 does not exist
ERROR: File/directory -keyPass does not exist
ERROR: File/directory AA65D2F9B26DDBABEF33 does not exist
ERROR: File/directory -storePass does not exist
ERROR: File/directory -keysEncrypted does not exist
Validating the files/directories specified for -outputSpec option
Validating the directory specified for -lstDir option
Error(s) have occurred; exiting with status 1
Failed to generate product JAR files in JAVA_TOP -
   /u01/appltest/TEST/apps/apps_st/comn/java/classes.
Kindly provide some inputs to troubleshoot further.
If you need further details, kindly let me know.
Regards,
Krish.

Hi all,
I have applied the consolidated JRI fixes - patch 17191279 .
Then, when generating Jar, received keypass is tampered error.
re-generated the key using $ adjkey -initialize.
Now, its working fine.
Regards,
Krish.

Error While generating Report

Hi ,
I am facing 1 problem while generating Report.
I am trying to generate a report based on one Users global attribute.
I have customized the USER UI CONFIG and Uer Report task to generate a report like this.
I created a new report to generate report and in that report I have given the condition as that attribute equals to some value "true" / "False".
But there are some users who has this attribute value as true and whose accounts are not properly created in a resource LDAP So this User view is containing some error.
Hence when I try to run the newly created report as it tries to iterate on the user objects whose view is containg some errors ,the report is not properly getting generated and giving exception as error in calling the method getResourceobjects on LDAP.
What can I do now ? What is the alternative for me? I want to generate the report on that attribute only.....
It is very urgent for me and Can anyone please help me out....
it would be so great if there is any immediate reponse for this.

>
... ORA-00932: inconsistent datatypes: expected DATE got NUMBER ...
>
I believe the above error message is very descriptive.
HTH
Srini

Getting error while generating report from Siebel (Siebel/BI Publisher)

Dear,
I have completed the integration of siebel and BIP according to the oracle document, I successfully upload the sample template from siebel application to BIP server.
But now I am facing two issues,
I am getting error "Unauthorized access, Please contact the administrator." when I open report on BIP which I have uploaded from siebel.
When I try to generate report from siebel=>application=>Tables=>S_Contact I am getting the below error when click on table report from Report button.
(httptransport.cpp (1635)) SBL-EAI-04117: HTTP Request error during 'Submitting Data SendHTTP request': 'Status code - 500'
(httptransport.cpp (983)) SBL-EAI-04117: HTTP Request error during 'Submitting Data Send HTTP request': 'Status code - 500'
(soapbinding.cpp (675)) SBL-EAI-04304: Unknown Part ':oracle.xdo.webservice.exception.InvalidParametersException' for operation 'runReport' exists in SOAP message.
(outdisp.cpp (247)) SBL-EAI-04308: Operation 'runReport' of Web Service 'http://xmlns.oracle.com/oxp/service/PublicReportService.PublicReportServiceService' at port 'PublicReportService' failed with the following explanation: "oracle.xdo.webservice.
Invalid User Name and Password for BIP Server
(xmlpadaptersvc.cpp (2287)) SBL-RPT-50529: Verify BI Publisher Server Userid and Password.
Error in generating Report Output file /siebel8/sea81/siebsrvr/siebel8/sea81/siebsrvr/xmlp/reports/Rept11-3U7M403.PDF in the XMLP Engine
(xmlpadaptersvc.cpp (2983)) SBL-RPT-50524: BI Publisher engine failed to generate report.
Object manager error: ([0] BI Publisher engine failed to generate report.(SBL-RPT-50524) (0x95c55c))
( (0) err=2818155 sys=9815388) SBL-OMS-00107: Object manager error: ([0] BI Publisher engine failed to generate report.(SBL-RPT-50524) (0x95c55c))
(bsvcmgr.cpp (1392) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
(bsvcmgr.cpp (1236) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
(smireq.cpp (425) err=2818251 sys=0) SBL-OMS-00203: Error 9815388 invoking method "GenerateReport" for Business Service "XMLP Driver Service"
Please help to resolve this issue.
Regards,
Soahil

This specifically means that the destinations have not been configured in the Crystal Job Server. If you're running 4.x, this may be part of the "Adaptive Job Server" instead of or in addition to a Crystal Job Server. If you're using 3.1 or earlier, you'll also have to set up the destination in the Destination Job Server.
You'll have to log in to the CMC, go to Servers, right-click on the correct job server and go to "Destinations". You'll then add something like "File" or "Unmanaged Disk" to the available destinations and save. Stop the job server, start it again, and your error should go away.
Please be aware that unless you're using specific credentials to schedule the report or you're saving to the server where BO is installed, you'll need to make sure that the BO services are running under a network "Services" account that has access to the folder you're scheduling the report to. By default during installation it's set to run under the "Local Services" account that doesn't have access to the network.
-Dell

Error while generating Report through XL Reporter.

Hello..
I am using microsoft excel 2003.I have installed XL Reporter 2005SP1. While i am trying to generate report throgh excel reporter i get the following error.
Security setting in microsoft excel prohibit XL Reporter from running.
For more information click Help.
I also tried by making security level low in microsoft excel -->Tools > Macros> Security.But still problem there.
Thanks,
Arpit

Hi Arpit,
As well as setting the macro security to Medium or lower, you need to tick the options 'Trust all installed add-ins and templates' and 'Trust access to Visual Basic Projects'. These options appear at the bottom of the Trusted Publishers tab in the Macro Security window.
Hope this helps,
Owen

Error while generating webservices using Date

I am facing the following problem while generating a web service which is having Date as one its members.
I have serialized a class with the following DataStructure
private String rowId1;
private Date created;
private String name;
private String quoteNum;
private String revNum;
private String curcyCd;
private String activeFlg;
private Number discntAmt;
private Number discntPercent;
When i tried to expose this as webservice, If I use the class oracle.jbo.domain.Date for Date type, the webservice is not generated properly. It is not including the method which contains this call. ie) This method is not present in the WSDL file as well as in the proxy.
When I used java.util.Date instead of oracle.jbo.domain.Date, I am able to expose the method and webservice got generated properly. But When i tried to generate the proxy for the WSDL in the consumer, I go the following error.
oracle.jdeveloper.webservices.model.GenerationException: Proxy generation failed for the following reason:
     at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.doGeneration(ProxyGenerator.java:608)
     at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.generateImpl(ProxyGenerator.java:365)
     at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.mav$generateImpl(ProxyGenerator.java:77)
     at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator$1ThrowingRunnable.run(ProxyGenerator.java:206)
     at oracle.jdeveloper.webservices.model.GeneratorUI$GeneratorAction.run(GeneratorUI.java:446)
     at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:551)
     at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.RuntimeException: generator error: no encoder for type "{http://www.w3.org/2001/XMLSchema}dateTime" and Java type "java.lang.String"
     at oracle.j2ee.ws.common.processor.Processor.runActions(Processor.java:105)
     at oracle.j2ee.ws.tools.wsa.AssemblerTool.run(AssemblerTool.java:99)
     at oracle.j2ee.ws.tools.wsa.WsdlToJavaTool.createProxy(WsdlToJavaTool.java:354)
     at oracle.j2ee.ws.tools.wsa.Util.createProxy(Util.java:838)
     at oracle.jdeveloper.webservices.model.proxy.ProxyGenerator.doGeneration(ProxyGenerator.java:549)
     ... 6 more
Caused by: generator error: no encoder for type "{http://www.w3.org/2001/XMLSchema}dateTime" and Java type "java.lang.String"
     at oracle.j2ee.ws.common.processor.generator.GeneratorBase.doGeneration(GeneratorBase.java:181)
     at oracle.j2ee.ws.common.processor.generator.GeneratorBase.perform(GeneratorBase.java:137)
     at oracle.j2ee.ws.common.processor.Processor.runActions(Processor.java:97)
     ... 10 more
I am referring to "Entity and view objects based on web service " in the following URL
http://radio.weblogs.com/0118231/stories/2004/09/23/notYetDocumentedAdfSampleApplications.html#93
Thanks and Regards,
James

Hi all,
I have applied the consolidated JRI fixes - patch 17191279 .
Then, when generating Jar, received keypass is tampered error.
re-generated the key using $ adjkey -initialize.
Now, its working fine.
Regards,
Krish.

Issue while generating report using web.show_document with https

Hi All,
I am facing some issue while seeing the report using web.show_document as shown below:
https://ucrmskr.apac.nsroot.net:10301/forms/html/001725032_gca.rtf_
In this case the report opens directly without asking for me to save or open or cancel option
whereas if I hit
http://scrmskr.apac.nsroot.net:7801/forms/html/001725032_gca.rtf_
it asks for save or open or cancel option
so that I can save the report to my machine and open in wordpad format
The report generated in the first case is not coming in proper format
Below are my forms.conf mappings:
# Name
# forms.conf - Forms component Apache directives configuration file.
# Purpose
# It should include the weblogic managed server (routing) directives for
# the servers where Forms applications are deployed and other miscellaneous
# Forms component OHS directives.
# Remarks
# This file is included with the OHS configuration under
# $OI/config/OHS/<OHS Node Name>/moduleconf sub-directory.
# virtual mapping for the /forms/html mapping.
RewriteEngine on
RewriteRule ^/forms/html/(..*) /workaroundhtml/$1 [PT]
AliasMatch ^/workaroundhtml/(..*) "/ucrmap1/weblogic/bea/ucrms/config/FormsComponent/forms/html/$1"
RewriteRule ^/ucrms/icons/(..*) "/workaroundicons/$1" [PT]
AliasMatch ^/workaroundicons/(..*) "/ucrmap1/weblogic/bea/ORA_PFRD/forms/java/$1"
RewriteRule ^/forms/help/(..*) "/workaroundhelp/$1" [PT]
AliasMatch ^/workaroundhelp/(..*) "/ucrmap1/ucrrgbg2/help/$1"
<Location /forms>
SetHandler weblogic-handler
WebLogicCluster kauh0079:9001
DynamicServerList OFF
</Location>
Please let me know what needs to be done additionally if we are trying to hit https because in the second case we were hitting http with similar mapping in diff environment and it was generating report successfully.
Regards,
Harish

Thanks for answering,
I changed the URL from
http://nbotlaguduru.dms.local/export/FMSLaborChargesalcs20060829132645.pdf
to
http://nbotlaguduru.dms.local:8889/export/FMSLaborChargesalcs20060829132645.pdf
and the same problem occured
the file is located on my local C drive in:
C:\lcs\export
seems as though I am missing something else as well
any ideas?

REP-300 Error while running report using App Server

Hi,
I am currently trying to run a report using the Application Server.
This report is being called from a form.
I am able to connect to the report server and all configurations seems to be correct.
But when I execute the report from the form, I am getting error "Unable to run report"
When I look at the error message in the Report Server queue, I find
"REP-300 Table or View does not exist.."
But that table does exist in the database.
What could be be the problem ?
Please help.
The code in the form that calls the report is
report_id := FIND_REPORT_OBJECT( report_name );
vc_user_name:=get_application_property(username);
vc_user_password:=get_application_property(password);
vc_user_connect:=get_application_property(connect_string);
vc_connect:=vc_user_name||'/'||vc_user_password||'@'||vc_user_connect;
SET_REPORT_OBJECT_PROPERTY(report_id ,REPORT_OTHER, 'paramform=yes p_user_connect='||vc_connect ||' p_servername=repsrv'||' p_action=<host>/reports/rwservlet?' );
v_rep := RUN_REPORT_OBJECT(report_id, parmlist_id);

The report is working perfectly fine when I run it from the Report Builder. I get the correct output.
I am getting this error when I try to run the report through a Report server.
I run the form from the Forms 10g builder. This form has a button "Run Report". When I click on the button the report is run using the Report server.
This is when I get the error.
There are other forms that are also called via the same form. Those work fine. The only difference between those forms and this one is that this one has user parameters passed to it. This one also has an attached library attached to it.
The code in the Form to call the report is
report_id := FIND_REPORT_OBJECT( report_name );
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESTYPE, FILE);
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_DESFORMAT, 'pdf');
SET_REPORT_OBJECT_PROPERTY(report_id, REPORT_SERVER, 'rep-vena01-xp');
v_rep := RUN_REPORT_OBJECT(report_id, parmlist_id );
v_jobid := substr( v_rep, length( v_reportserver) + 2, length(v_rep) );
v_repstatus := REPORT_OBJECT_STATUS( v_rep );
IF ( v_repstatus = 'FINISHED' ) THEN
v_url := '/reports/rwservlet/getjobid' || v_jobid || '?server=' || v_reportserver ;
web.show_document( v_url, '_BLANK' );
END IF;

Error while generating stub using ant generate-stubs

I am getting error while running ant "generate-stubs" for generating stub.The details of errors as below:
[exec] error: modeler error: expected root element "definitions" (in namesp
ace "http://schemas.xmlsoap.org/wsdl/"), found element "html" (in namespace "nul
l")
Any help????

Perhaps there is an error while you specified the namespaces. Chk them and try............Hope that helps...............ABHI

Get a Report crashed error while running report using the mode character

Hello,
I'am getting an "Enable to run report - Report as crashde" issue only when I'am running reports using the mode character. The same report with desformat pdf never has any problems. I have changed the englife (set to one) increase the cachesize but I still have the same issue.
I'm using report 6i and Oracle 8i.
Thanks in advance for your help.
Regards,
Laurent.

Hi Thanks for the response,
In fact the report in character mode is working fine in my environnement but is not working on my customer environnement (which is supposed to be the same as mine). I was thinking of cache size issue or something like this ?
Regards,
Laurent.

Error while generating ear using ant script in weblogic workshop 10

In my application I have to create a ear file which should have the war file inside.
I have created the build.xml for both ear application and web application, workshop.xml using weblogic workshop option
File->export->WorkshopAntScripts
I have been using the following command to execute the build.xml in EARApp(ear application)
set the environment variables by running
D:\bea\wlserver_10.0\common\bin\commEnv.cmd
then
D:\Source_Code\EARApp>ant clean build archive -Dworkspace="D:\Source_Code"
I am getting the following error,
Buildfile: build.xml
init.env:
check.versions:
init.typedefs:
init:
clean:
init.env:
check.versions:
init.typedefs:
init:
clean:
[delete] Deleting 53 files from D:\Source_Code\WebApp\.apt_src
[delete] Deleted 14 directories from D:\Source_Code\WebApp\.apt_src
[delete] Deleting 218 files from D:\Source_Code\WebApp\build\classes
[delete] Deleted 42 directories from D:\Source_Code\WebApp\build\classes
[delete] Deleting directory D:\Source_Code\WebApp\build\assembly\.src
[delete] Deleting directory D:\Source_Code\WebApp\build\weboutput
[mkdir] Created dir: D:\Source_Code\WebApp\build\weboutput
init.env:
check.versions:
init.typedefs:
init:
build:
init.env:
check.versions:
init.typedefs:
init:
build:
[apt] [web.content.root]|[D:\Source_Code\WebApp/\WebContent]
[apt] [web.source.roots]|[D:\Source_Code\WebApp/src]
[apt] Compiling 113 source files to D:\Source_Code\WebApp\build\classes
[apt] warning: Annotation types without processors: [java.lang.SuppressWarnings, org.apache.be
ehive.controls.system.jdbc.JdbcControl.ConnectionDataSource, org.apache.beehive.controls.system.jdbc
.JdbcControl.SQL, com.bea.control.annotations.TransactionAttribute]
[apt] 1 warning
[apt] warning: Annotation types without processors: [java.lang.SuppressWarnings]
[apt] 1 warning
[apt] [web.content.root]|[D:\Source_Code\WebApp/\WebContent]
[apt] [web.source.roots]|[D:\Source_Code\WebApp/src]
[apt] Compiling 53 source files to D:\Source_Code\WebApp\build\classes
[apt] warning: Annotation types without processors: [java.lang.SuppressWarnings]
[apt] 1 warning
[javac] Compiling 113 source files to D:\Source_Code\WebApp\build\classes
[javac] Note: Some input files use unchecked or unsafe operations.
[javac] Note: Recompile with -Xlint:unchecked for details.
[javac] Compiling 53 source files to D:\Source_Code\WebApp\build\classes
[delete] Deleting directory D:\Source_Code\WebApp\build\weboutput
[mkdir] Created dir: D:\Source_Code\WebApp\build\weboutput
[copy] Copying 1 file to D:\Source_Code\WebApp\build\weboutput\WEB-INF
[copy] Copying 1 file to D:\Source_Code\WebApp\build\weboutput\WEB-INF
init.env:
check.versions:
init.typedefs:
init:
stage:
[delete] Deleting directory D:\Source_Code\EARApp\.staging
[mkdir] Created dir: D:\Source_Code\EARApp\.staging
[copy] Copying 7 files to D:\Source_Code\EARApp\.staging
init.env:
check.versions:
init.typedefs:
init:
stage.to.ear:
init.env:
check.versions:
init.typedefs:
init:
stage:
init.env:
check.versions:
init.typedefs:
init:
generated.root.init:
assembly:
[mkdir] Created dir: D:\Source_Code\WebApp\build\assembly\.src
[assemble] Assembly failed - Control Assembly process failed
[assemble] Caused by: info
BUILD FAILED
D:\Source_Code\EARApp\build.xml:189: The following error occurred while executing t
his line:
jar:file:/D:/bea/WLSERV%7e1.0/workshop/lib/workshop-antlib.jar!/com/bea/workshop/cmdline/antlib/antl
ib.xml:92: The following error occurred while executing this line:
D:\Source_Code\EARApp\build.xml:201: The following error occurred while executing t
his line:
D:\Source_Code\WebApp\build.xml:351: The following error occurred while executing thi
s line:
D:\Source_Code\WebApp\build.xml:177: The following error occurred while executing thi
s line:
D:\Source_Code\WebApp\build.xml:424: Assembly failed.
Some one help me solve this problem.
Thanks in advance.

--> some error on posting please refer to the next post...
From the error logs we can trace it out to the web project's Build.xml file ....I was getting a similar error and by commenting out the following lines in the web project's Build.xml I am able to run the build script correctly and get a EAR file. The lines are

Please check it now, also if any one can let us know the function or role played by the above lines it would be great. Also if there would be any future or unseen problems by commenting out these lines please do let us know...
Thanks
-MiM
Edited by prodigymonish83 at 10/22/2007 5:56 AM

EEWB : Error while generating extension using wizard

Folks,
We are on CRM 5.0, am getting the following error when I try to create few custom fields using EEWB.
While creating the project & extension, I gave #temp as the package (dev. class).
when I try to start the wizard for creating new fields and provide the technical details and press 'complete' button, am getting the following error:
<b>Task BUPA_CI_FILL CRDCLNTxxx
Table BUT000_TD (Statements could not be generated)</b>
Detailed Error message:
Message no. DT066
Diagnosis
A requested database action could not be carried out.
Procedure
First try to repeat the action which caused this message. If the
database action again cannot be carried out, find out the cause of the
error using the analysis tool in the database utility. There might be an
inconsistency between the table definition in the ABAP Dictionary and
the existing nametab (runtime object for the table).
Can you suggest what could be wrong here.
Thanks in advance
Guest01

thanks Sudheer. I checked the syntax check and got the following log displayed.
I can send you the description (long text) of some of these messages. could you have a look at them and give your inputs.
Check table/structure BUT000_TD
           Check table BUT000_TD (USERID/05/25/07/06:21)
           Enhancement category 3 possible, but include or subty. not yet classified
           Several fields of type LANG: Select one of these as text language
           No data exists (structure change caused by DROP / CREATE)
           Error in code generation for deleting table BUT000_TD
           Table BUT000_TD (Statements could not be generated)
           Error number in DD_DECIDE (64)
           Check on table BUT000_TD resulted in errors

"Failed to open report" error while running reports using Crystal Report

We have a web application develeoped in ASP.Net, SQL Server 2005 , Crystal Reports 10.0. Sometimes if a large number of users run reports from their individual nodes they receive an error "Failed to open report ", if we restart the IIS they are able to run the reports. In addition to this the users also sometimes get the error "Maximum Report limit attained". Can any one provide me with a solution other than restarting the IIS.

Hi,
Use the close and dispose method for Report object. Its a best practice to code also gc.collect for garbage collection.
It might help you!!
Regards,
Amit

Error while generating report using BI 2013

Similar Messages

Maybe you are looking for