Error while generating stub using ant generate-stubs

I am getting error while running ant "generate-stubs" for generating stub.The details of errors as below:
[exec] error: modeler error: expected root element "definitions" (in namesp
ace "http://schemas.xmlsoap.org/wsdl/"), found element "html" (in namespace "nul
l")
Any help????

Perhaps there is an error while you specified the namespaces. Chk them and try............Hope that helps...............ABHI

Similar Messages

Error while trying to use Ant and creating Jdbc Datasource

I was following the documentation to auto-create my datasource in my weblogic server. I get an error while it is trying to link the datasource to the server. Does anybody have any ideas,it is almost like the query to get the server isn't working.
Here is my ant task:
<target name="setupJdbcDatasource">
     <wlconfig url="t3://localhost:7001" username="weblogic" password="weblogic">
     <query domain="MyDomain" type="Server" name="AdminServer" property="adminserver"/>
     <create type="JDBCConnectionPool" name="TestDatasource" property="DatasourceTest">
          <set attribute="CapacityIncrement" value="1"/>
          <set attribute="DriverName" value="weblogic.jdbcx.oracle.OracleDataSource"/>
          <set attribute="InitialCapacity" value="1"/>
          <set attribute="MaxCapacity" value="10"/>
          <set attribute="Password" value="cmuser"/>
          <set attribute="Properties" value="user=cmuser SID=ORCH serverName=10.13.5.144 portNumber=1521"/>
          <set attribute="RefreshMinutes" value="0"/>
          <set attribute="ShrinkPeriodMinutes" value="15"/>
          <set attribute="ShrinkingEnabled" value="true"/>
          <set attribute="TestConnectionsOnRelease" value="false"/>
          <set attribute="TestConnectionsOnReserve" value="false"/>
          <set attribute="URL" value="jdbc:bea:oracle://10.13.5.144:1521"/>
          <set attribute="Targets" value="${adminserver}"/>
     </create>
     </wlconfig>
</target>
My Domain is MyDomain, and server is AdminServer. The error I get is:
[wlconfig] weblogic.management.DistributedManagementException : Distributed Management [1 exceptions]
BUILD FAILED
X:\ibutt_PCView\src\CM\build.xml:285: Error invoking MBean
command: javax.management.MBeanException
And in my server log:
jdbcDataSourceBean=[MBeanServerInvocationHandler]com.bea:Name=CP-ConfigManagemen
tTest,Type=weblogic.j2ee.descriptor.wl.JDBCDataSourceBean,Parent=[MyDomain]/JDBC
SystemResources[CP-ConfigManagementTest],Path=JDBCResource
<May 21, 2006 3:50:57 PM EDT> <Warning> <JDBC> <BEA-001129> <Received exception
while creating connection for pool "ConfigManagementTest": [BEA][Oracle JDBC Dri
ver]Missing connection information: no serverName specified.>
<May 21, 2006 3:50:58 PM EDT> <Error> <Deployer> <BEA-149265> <Failure occured i
n the execution of deployment request with ID '1148241051441' for task 'weblogic
.deploy.configChangeTask.2'. Error is: 'weblogic.application.ModuleException: '
weblogic.application.ModuleException:

Hi. This seems like an XML parsing problem.
Could you please try changing the driver
properties from:
<set attribute="Properties" value="user=cmuser SID=ORCH serverName=10.13.5.144 portNumber=1521"/>
to:
<set attribute="Properties" value="user=cmuser SID=ORCH"/>
The server and port are already in the URL
thanks,
Joe

Weblogic.jspc outofmemory error while compiling jsps using ant in eclipse

Hi all,
I am trying to execute this target in my ant build:
     <target name="jspc">
          <java classname="weblogic.jspc" fork="yes">
               <arg line="-verbose -verboseJavac -compileAll -webapp ${project.jsp.dir} -d ${project.jsp.class.dir}" />
               <classpath>
                    <pathelement path="${classpath}" />
               </classpath>
     </java>
     </target>
I am getting the following error:
[java] Error: [jspc]: 0 file(s) failed:
[java] [Compilation errors : ]
[java] The system is out of resources.
[java] Consult the following stack trace for details.
[java] java.lang.OutOfMemoryError
[java] at weblogic.jspc.doCompile(jspc.java:861)
[java] at weblogic.jspc.runJspc(jspc.java:654)
[java] at weblogic.jspc.runBodyInternal(jspc.java:412)
[java] at weblogic.jspc.runBody(jspc.java:319)
[java] at weblogic.utils.compiler.Tool.run(Tool.java:192)
I am using weblogic 8.1, eclipse3.1, java1.4.1.
Can some one please help me with this issue?
thanks in advance.

--> some error on posting please refer to the next post...
From the error logs we can trace it out to the web project's Build.xml file ....I was getting a similar error and by commenting out the following lines in the web project's Build.xml I am able to run the build script correctly and get a EAR file. The lines are

Please check it now, also if any one can let us know the function or role played by the above lines it would be great. Also if there would be any future or unseen problems by commenting out these lines please do let us know...
Thanks
-MiM
Edited by prodigymonish83 at 10/22/2007 5:56 AM

Error while creating stock using tcode: MB1C

Error while creating stock using tcode: MB1C
The Error is: Check table T004F:entry G006 does not exist

Hi ,
Please check the FSV (field status variant) for your company code in OBY6 .
then go to transaction code OB14 --> enter the FSV --> Check if field status group G006(Material account) is maintained there or not.
if not please maintain it.
Thanks & Regards
Anshu

Error while migrating users using CSSImportExportUtility

Error while migrating users using CSSImportExportUtility
I'm tring to export all user and group information from a Hyperion Shared Services 9.2.1 by using CSSExport.bat
When there was only native directory in HSS, i can export these information successfully.
But when I enabled NTLM external user authentication following error occurred:
Exception in thread "main" java.lang.UnsatisfiedLinkError: getOSVersion
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.getOSVersion(Native Metho
d)
at com.hyperion.css.spi.impl.ntlm.NTLMProvider.<clinit>(Unknown Source)
at com.hyperion.css.spi.impl.ntlm.NTLMConnectionClient.getUsers(Unknown
Source)
at com.hyperion.css.CSSAPIExtnImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.getUsers(Unknown Source)
at com.hyperion.css.CSSAPIImpl.initialize(Unknown Source)
at com.hyperion.css.exchange.NativeProviderManager.<init>(Unknown Source
at com.hyperion.css.exchange.ImportExportManager.cssExport(Unknown Sourc
e)
at com.hyperion.css.exchange.CommandUtility.run(Unknown Source)
at com.hyperion.css.exchange.CommandUtility.main(Unknown Source)
I searched reference documents on the web, found this article: (http://download.oracle.com/docs/cd/E12825_01/epm.111/readme/mdm_111110_readme.html)
Troubleshooting Tip: If HSS is configured for an NTLM provider, DRM services may not start due to error: "Exception Emdm_Exception with message 'Could not Initialize CSS. Error: 'getOSVersion'."
You may receive the following error after clicking the "Enable CSS" button in DRM Console: “LoadLibrary("C:\Hyperion\Master Data Management\mdm_ntier_css_validator.dll") failed - The specified module could not be found.”
To resolve both of these conditions, update the Windows System Path on the Data Relationship Management server with the applicable JRE and CSS pathing below.
NOTE: Reboot the Data Relationship Management server machine after making any changes to the Windows Path.
NOTE: Ensure that only one JRE version and one CSS version are referenced in the Windows Path.
? For HSS 9.3.1:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.1\bin;
? For HSS 9.3.0:
%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin;%HYPERION_HOME%\common\JRE\Sun\1.5.0\bin\client;%HYPERION_HOME%\common\CSS\9.3.0\bin;
? For HSS 9.2.0.3:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0.3\bin;
? For HSS 9.2.0:
%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin;%HYPERION_HOME%\common\JDK\Sun\1.4.2\jre\bin\client;%HYPERION_HOME%\common\CSS\9.2.0\bin;
I found these is no directory "%HYPERION_HOME%\common\CSS\9.2.0\bin;" exists but "%HYPERION_HOME%\common\CSS\9.2.1\bin;"
I configured PATH by setting to above, and tried CSSExport again, still failed.
Than I disabled the NTLM is HSS, tried CSSExport again. It was successful.
So I am convinced that the problem caused by NTLM or PATH environment variable or some files associated.
Does anybody know the solution ?

I recommend you upgrade at least to 10.1.0.5. 10.1.0.2 comes with the very first version of csalter.plb, which has not the current implementation. From and to which character set do you try to migrate?
-- Sergiusz

Error while Loading Budgets Using AMG

Error while Loading Budgets Using AMG
Dear All,
I am trying to load Budgets into ORACLE Projects using AMG API's..
I have developed PL/SQL which uses below procedures of pa_budget_pub package.
init_budget;
load_budget_line;
execute_draft_budget;
baseline_budget;
Procedure execute_create_draft_budget fails with following error message.
error message: Please enter a valid product code for this project.
error message: You entered an invalid API parameter.Please enter valid parameter and try again. Parameter Name: Resource List Parameter Value: 1446
error message: Project: AC044. Please specify a valid resource list.
error message: Project: AC044. Please specify a valid resource list.
Could somebody explain me how to resolve this error message and load the budget lines.
Thanks in Advance.
Afsal Basha.

What I'm saying is, verify the column name. Dont post if not possible.
Example follows, with one table intentionally "hidden".
SQL> create table "tEsT" ("MaxNumber" float, "MaxnumbeR" number);
SQL> select table_name,column_name from user_tab_columns where table_name like 't%';
TABLE_NAME                     COLUMN_NAME
tEsT                           MaxNumber
tEsT                           MaxnumbeR
teST                           iD
teST                           MaxNumberHth,
Fredrik

Error while insert data using execute immediate in dynamic table in oracle

Error while insert data using execute immediate in dynamic table created in oracle 11g .
first the dynamic nested table (op_sample) was created using the executed immediate...
object is
CREATE OR REPLACE TYPE ASI.sub_mark AS OBJECT (
mark1 number,
mark2 number
t_sub_mark is a class of type sub_mark
CREATE OR REPLACE TYPE ASI.t_sub_mark is table of sub_mark;
create table sam1(id number,name varchar2(30));
nested table is created below:
begin
EXECUTE IMMEDIATE ' create table '||op_sample||'
(id number,name varchar2(30),subject_obj t_sub_mark) nested table subject_obj store as nest_tab return as value';
end;
now data from sam1 table and object (subject_obj) are inserted into the dynamic table
declare
subject_obj t_sub_mark;
begin
subject_obj:= t_sub_mark();
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,subject_obj from sam1) ';
end;
and got the below error:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7
then when we tried to insert the data into the dynam_table with the subject_marks object as null,we received the following error..
execute immediate 'insert into '||dynam_table ||'
(SELECT

887684 wrote:
ORA-00904: "SUBJECT_OBJ": invalid identifier
ORA-06512: at line 7The problem is that your variable subject_obj is not in scope inside the dynamic SQL you are building. The SQL engine does not know your PL/SQL variable, so it tries to find a column named SUBJECT_OBJ in your SAM1 table.
If you need to use dynamic SQL for this, then you must bind the variable. Something like this:
EXECUTE IMMEDIATE 'insert into op_sample (select id,name,:bind_subject_obj from sam1) ' USING subject_obj;Alternatively you might figure out to use static SQL rather than dynamic SQL (if possible for your project.) In static SQL the PL/SQL engine binds the variables for you automatically.

Getting error while creating subsite using custom template in sharepoint2013

Hi,
I am getting the following error while creating subsite using custom template in sharpoint2013. even publish features are enabled.
Please suggest me on this.
Thanks in advance.

You need to enable the PerformancePoint Service Site Collection Features(PPSMonDatasourceCtype)
on the target site collection. go to site action > site settings> site collections features > and enable it and now try again.
Similar case: http://imughal.wordpress.com/2012/09/20/dependency-feature-ppsmondatasourcectype-id-05891451-f0c4-4d4e-81b1-0dabd840bad4-for-feature-bicenterdataconnections-id-3d8210e9-1e89-4f12-98ef-643995339ed4-is-not-activated-at-this-scop/
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

INVALID_QUEUE_NAME : Error while scheduling message using qRFC

Hello SDNers
We are currently performing our PI 7.1 upgrade and one of our scenario uses a Sender SOAP of the type EOIO. We tried executing this scenario in PI 7.1 XID environment and in it worked fine without any errors but in our PI 7.1 QA environment it is giving the following errors
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SCHEDULE_ERROR</SAP:Code>
<SAP:P1>XBQOC___*</SAP:P1>
<SAP:P2>INVALID_QUEUE_NAME</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while scheduling message using qRFC (queue name = XBQOC___*, exception = INVALID_QUEUE_NAME)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can you please exaplian what could be the issue we are facing.
Thanks.
Kiran
Edited by: Kiran Sakhardande on Oct 22, 2008 4:08 PM

HI Kiran,
Have gone throgh the following link?
INVALID_QUEUE_NAME
Regards
Sridhar Goli

Getting error while publishing workflow using SP designer for SharePoint 2013

Hi,
I am try to setup Workflow manager for our sharepoint applications.
WF manager set ran without any issue.
I registered the SPWorkflow service which succeeded as well. The Workflow service application shows "Workflow is connected"
I am creating a workflow using sharepoint designer using my credential (not Service account). I am able to save it but while publishing, its prompting with an error.
The error says "Errors were found while compiling the workflow.The workflow files were saved but cannot run." Clicking advanced button show
"Microsoft.SharePoint.SPException: We're sorry, we weren't able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.
at Microsoft.SharePoint.SPScaleOutDatabaseMap.CreateSqlSession(ISPScaleOutDatabaseMapProvider mapProvider, Byte[] compositeKey, Guid forceRefreshVersion, Guid& version)
at Microsoft.SharePoint.SPScaleOutDatabaseCommandExecutor.Execute(ExecuteDelegate operation, ISPScaleOutDatabaseMapProvider mapProvide"
Any help would be highly appreciated
Thanks,

Hi,
According to your post, my understanding is that you got error while publishing workflow using SharePoint designer for SharePoint 2013.
Please check whether the Central Admin > Manage Service Application-> “App Management Service” is started.
Please check whether the “Configure service application associations”, ”App Management Service” is already associated.
Then please check whether the “Manage Services on server” and the “App Management Service” is started.
In addition, please try to re-register Workflow Service.
If the issues still exists, please follow the steps in the
Steps to Verify that Server Is Correctly Set Up. After you verified that the server is correctly set up, follow the steps in the
Steps to Troubleshoot Workflow Management Service and
Troubleshooting the Service Bus for Windows Server then retry your action related to publishing workflows
More information:
http://wp.ahcheng.com/2013/03/23/error-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Error while trying to use '{' in the query

Hi,
The below mentioned query is giving Error while trying to use '{'
Query:
select s,x from table(SEM_MATCH(
'{?s rdf:type <http://www.cs.com/sbip/dwh/mdm/data_modeling#Base_Term> .
?s ?p ?x}',
SEM_Models('foundation'),
SEM_RuleBases('OWLPRIME'),
SEM_ALIASES(SEM_ALIAS('dm','http://www.cs.com/sbip/dwh/mdm/data_modeling#'),
SEM_ALIAS('owl','http://www.w3.org/2002/07/owl#')), null, 'INVALID'))
where regexp_like(x,'Customers','i');
Error details:
ORA-29532: Java call terminated by uncaught Java exception: oracle.spatial.rdf.server.TokenMgrError: Lexical error at line 1, column 1. Encountered: "{" (123), after : ""
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 178
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 67
ORA-06512: at line 4
I am unable to use Option, Filter in query.
Any solution?
Please let me know do i need to apply any patch?
Note: I am using Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
Regards,
Kavitha.

Hi,
For OPTIONAL support in 11.1.0.7.0, you need the following patch
Patch 7600122: CURLY BRACE SYNTAX,VIRTUAL MODELS, NETWORK INDEXES AND HINTO FRAMEWORK SUPPORT
Support for SPARQL FILTERs in SEM_MATCH is not available for 11.1.0.7.0. You will need version 11.2.0.1.0 or later for FILTER support. With 11.2.0.1.0, we recommend that you apply our latest patch set:
Patch 9819833: SEMANTIC TECHNOLOGIES 11G R2 FIX BUNDLE 2
All of the above patches are available through My Oracle Support.
Thanks,
Matt

"Submission status" error while posting comments using evcom

Hi friends,
I am getting "Submission status" error while posting comments using evcom. This error comes up even when we use "post comments" option in Action Pane.
The error text goes like this :
Error Message -
This cell can not be updated. Submission status must be modified to allow changes.
010_000|2009.TOTAL|INTERCO|NOPC
How can we get rid of this error?

That's means the status for that specific category, time entity is approved and you can not do any changes including
comments chnages.
You have to change first the work status for that entity and after that you will be able to submit your comments.
Regards
Sorin radulescu

Unknown error while updating module use!

I restarted XE with "/etc/init.d/oracle-xe stop /etc/init.d/oracle-xe start" and then see this error message in the terminal console. Every serveral minutes, the error "Unknown error while updating module use!" is echoed.
Any advice?

Look for the alert_xe.log file, maybe you'll find some additional information there if that message is related to your XE instance.
C.

Error while accessing webservice using generated stub

I want to consume a webservice which supplies information about countries:
http://www.oorsprong.org/websamples.countryinfo/CountryInfoService.wso?WSDL
I have generated a Webservice stub using JDeveloper. It supplies me with the right interface, but when I use the stub to access the webservice, I encounter an error:
java.lang.ClassCastException: oracle.xml.parser.v2.XMLText
     at oracle.jdeveloper.webservices.runtime.WrappedDocLiteralStub.fromElement(WrappedDocLiteralStub.java:614)
     at mypackage3.CountryInfoServiceStub2.CapitalCity(CountryInfoServiceStub2.java:72)
     at mypackage3.callWS.main(callWS.java:19)
I have checked the response message, but it is all right. With "some" handcoding , I can extract the answer I want out of the response XML. It seems, that the stub fails to cast the response to the right result class.
The method I use from the stub generated by JDeveloper. The error occurs at the last line, where the content of the message should be cast to String :
=========================================================
public String CapitalCity(String sCountryISOCode) throws Exception
URL endpointURL = new URL(_endpoint);
Envelope requestEnv = new Envelope();
Body requestBody = new Body();
Vector requestBodyEntries = new Vector();
String wrappingName = "CapitalCity";
String targetNamespace = "http://www.oorsprong.org/websamples.countryinfo";
Vector requestData = new Vector();
requestData.add(new Object[] {"sCountryISOCode", sCountryISOCode});
requestBodyEntries.addElement(toElement(wrappingName, targetNamespace, requestData));
requestBody.setBodyEntries(requestBodyEntries);
requestEnv.setBody(requestBody);
Message msg = new Message();
msg.setSOAPTransport(m_httpConnection);
msg.send(endpointURL, "", requestEnv);
Envelope responseEnv = msg.receiveEnvelope();
Body responseBody = responseEnv.getBody();
Vector responseData = responseBody.getBodyEntries();
return (String)fromElement((Element)responseData.elementAt(0), java.lang.String.class);
=========================================================
The class I use to call the webservice:
=========================================================
package mypackage3;
public class callWS
public callWS() { }
public static void main(String[] args)
{ System.out.println("Calling CountryInfo Webservice");
try
CountryInfoServiceStub2 ws1 = new CountryInfoServiceStub2();
String capitalCity = ws1.CapitalCity("IT");
System.out.println("Capital City=" + capitalCity);
} catch (Exception exception)
{   System.out.println("An error occured while calling CountryInfoStub2:" );
exception.printStackTrace(System.out);
=========================================================

Hi dickdral
I', afraid I have not solution but the same problem. Today I try use VIES (http://ec.europa.eu/taxation_customs/vies/api/checkVatPort)
and the same exception occurs. Stub was generated by JDev 10.1.2.
Do you resolve this problem?
Thanks
Jara

$ expression while creating Query using Query generator

hello friends,
I m using qurery generator for Approval templates. I want Quantity value of GRN at a runtime.So for that I have to write a query I got some example of that for Business partner this is done using $[$3.24] for card code in business partner.But I want to know about this $ expression with following number.
I found this query while searching
SELECT (T0.[CreditLine]-$[$3.24.Number]) FROM OCRD T0 INNER JOIN POR1 T1 ON T0.CardCode = T1.BaseCard WHERE T0.[CardCode] = $[$3.18]
Plz tell me abt this $ expression frm where its come.Is it store somewhere??
Thanks & Regards,
Swati
Edited by: Rui Pereira on Dec 23, 2008 4:49 PM

Hello Swati,
It has something to do with Format Search. Please find the attached for Format Search Introduciton. Or you may go to Forrum [SAP Business One|SAP Business One Application; for more information, which is the right place for this question. Thanks.
Regards, Yatsea

Error while generating stub using ant generate-stubs

Similar Messages

Maybe you are looking for