Error while generating the Business Object in Mobile Sales
Hi,
I made changes to the Business Object BOCAPGEN.
Now I am trying to generate the business object but it is giving out the error saying
Error intializing RT Generator !.RT Generator Failed for ".Error arsrep.dat is in use so Generation cannot be done
I am not a MSA Developer and have no clue regarding MAS(Mobile Application Studio)
So any one can please give me a clue regarding the issue
I have solved it by closng all other application other than client console
Thanks Guys
Message was edited by: zack taylor
Hi !
1 year later, I am facing the same problem.
I want to build MSA 4.0 SP8, everything runs fines until the end of the generation of the Tiles, the next step fails :
Error intializing RT Generator !.RT Generator Failed for ".Error arsrep.dat is in use so Generation cannot be done
Then around 10 thousands of error messages of that kind follow in the output window ; howeverin the end it says "Generation End" without telling whether it was successful or not (the first time the output window was too small, I thought all was OK )
Anyways, the Mobile Sales icon appeared on the desktop and when I try to launch it I get the error "Starting MobileSalesfailed".
During another attempt, I check with "Unlocker" the 2 arsrep.dat files I found under the BOL directory, it reported that none was used and locked at that moment.
Also I killed the vbagen.exe process before starting the build, but it was automatically launched after. (first build was launched after a reboot, the 2nd after the 1st failed + vbagen.exe process killed)
Does anyone have any clue ?
Another question is : what are the rights required ? I am a local administrator but I do not have full admin rights (the only thing I saw at the moment is I cannot access to Add/Delete Programs in the Control Panel)
Thanks & Regards,
François
-edit-
thanks to the one who moved it to the right forum
Message was edited by:
Francois Feugier
Similar Messages
-
Error While Generating the Proxy Objects
Hi All,
While Generating the Proxy Obects in SPROXY at SAP R/3 side,
Iam getting this Error
http://img169.imageshack.us/img169/5752/proxylm0.jpg
Can any one Occured this type of Error
Regards
SumanHi PT,
Now the Strange Issue came,
While generating the proxy objects i got that above mentioned error
After that i have run the 3 report programs according to the Ramesh Suggession
Now if i goto SPROXY means it is saying that No Conection to Integration Builder .
I have checked the RFC Destination created in SM59 of SAP R/3 of Type H.It is fine
What more i have to check
First of all when ever i open the Sropxy, every time User & pwd is requesting
Can you please through a light where to check
Regards
Suman -
ERROR while activating the Business Content of Sales Cube 0SD_C03
Hi,
iam facing an error, iam getting the error while activating the Business Content sales info cube and Inventory info cube with the collection option DATA FLOW BEFORE. In my system the service pack was 14, what shall be the approach. Here iam getting the error like some 0DB-- objects are not available in the D version. if u have any solution for this please share with use also.
Please treat this as an urgent, because we are unable to proceed with the further Business Content Activation.
Thanks,
Prabhakar.Hi Raj,
I have searched for those objects in the BI content for activating those objects, but those objects are not available in the BI content.
In general while activating the info cube if any object is in inactive means we will activate the object seperatly and we will activate the info cube it will resolve the issue. but here those 0DB-- objects are not available in the BI content.
While activating the sales and inventory info cube it was throughing the short dump, In the short dump it is showing these message.
ASSIGN_LENGTH_0 " "
SAPLSNR3 or "LSNR3F01"
LOCAL_BUFFER
please treat this as urgent.
Thanks
Prabhakar. -
InfoSet Query: Syntax Error while generating the program.
Dear All,
I have a Query in CRM system which contains an Infoset based on LDB.
The InfoSet Query throws up a Syntax error while generating the program.
So, we are not able to change the Infoset using the Infoset Query through SQ01.
The error is as follows:-
Syntax error in program "AQZZ==/SAPQUERY/CRM_ACTMON1 ".
Error in the ABAP Application Program
The current ABAP program "CL_QUERY_OUTPUT_DEFINITION====CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program "AQZZ==/SAPQUERY/CRM_ACTMON1 "
in include "AQZZ==/SAPQUERY/CRM_ACTMON1 " in
line 28:
""CRMT_REPORT_LOCATORLIST" must be a flat structure. You cannot use int"
"ernal tables, strings, references, or structures as components. -"
Please help me arrive at an solution, so that we are able to change the Infoset through the InfoSet Query.
Awaiting your reply as soon as possible.
Thanks and Regards,
Pankaj.There is an error in your query, specifically in the definition of CRMT_REPORT_LOCATORLIST. In the short dump (transaction ST22) you will see more details and the exact location of an error if you just scroll down.
I can't tell more because this problem is specific to your system, to which I have no access. Read the whole dump and look at all the objects mentioned there. -
Error while generating the report on Test env (for divide condition)
Hi All,
I am facing the below error while generating the report in test environment while the same report is working fine on Prod environment.
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16001] ODBC error state: S1000 code: 1791 message: [Oracle][ODBC][Ora]ORA-01791: not a SELECTed expression. [nQSError: 16015] SQL statement execution failed. (HY000)
Actually the error is coming for the below logics:
COUNT(DISTINCT RMA.RMA)/COUNT(DISTINCT User."User Name")
"RMA Fact"."Module Backlog"/COUNT(DISTINCT User."User Name")
Can anyone please tell if I need to make any configuration changes as the same logic works perfectly fine on production but not on test.
Thanks in advanceIs anyone having any idea about it...
-
Error while generating the Infoset
Dear SD Experts,
I get the Error While Generating the Infoset.
I am actually trying to write a Query.
the tables i have inserted are VBAK, VBAP, VBEP, LIKP, LIPS
below is the List.
1)Differences in field TEXT_VBAP_CHARG
2)Differences in field TEXT_VBEP_ETENR
3)Differences in field TEXT_VBEP_ETENE
4)Differences in field TEXT_VBEP_PLNUM
5)Differences in field TEXT_LIPS_CHARG
6)Differences in field TEXT_LIPS_LGPLA
Thanks in Advance.
Regards,
Santa Khattri.Hi ,
From what you are saying, i am guessing there could be difference in field types used and in dictionary.
Try this.
1.Go to SQ02
2.Change query area (Standard / Global) in Environment --> Query areas depending on where your infoset is.
3. Select your Infoset.
4. Goto --> More functions --> Check and generate / consistency check --> Adjust.
or Try this.
1. Select your infoset.
2. Change
3. Goto --> Global properties --> see if "no automatic text recognition" is checked in options tab.
If you still having problems, give me more detail on how have you joined tables, have you used any extra fields, or have you done any coding in Infoset, I may be able to help you.
Thank you.
Regards,
Subin John. -
Bursting Program errors with "Error while generating the Document"
Hello Folks
Here is my bursting control file
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
<xapi:globalData location="stream">
</xapi:globalData >
<xapi:request select="/XMLEXCEL1/LIST_G_Q0">
<xapi:delivery>
<xapi:email server="mycompany.com" port="25" from="[email protected]"
reply-to ="[email protected]">
<xapi:message id="1234" to="[email protected]"
attachment="true" content-type="html/text"
subject="Employee Report for Empno"> Dear
Please review the attached document</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document key="123" output-type="XLS" delivery="1234"
output="XMLEXCEL1" >
<xapi:template type="RTF" location="xdo://AR.XMLEXCEL1.en.00/?getSource=true">
</xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
this is the output of bursting status report:
<?xml version="1.0" encoding="UTF-8"?>
<BURS_REPORT><REQUESTID>40403415</REQUESTID>
<PARENT_REQUESTID>40403339</PARENT_REQUESTID>
<REPORT_DESC>XMLEXCEL1</REPORT_DESC>
<OUTPUT_FILE>/opt/local/application/orafin/applmgr/out/outfaud/S1759.zip
</OUTPUT_FILE>
<DOCUMENT_STATUS>
<KEY>123</KEY>
<OUTPUT_TYPE>XLS</OUTPUT_TYPE>
<DELIVERY></DELIVERY>
<OUTPUT>
</OUTPUT>
<STATUS>fail</STATUS>
<LOG>Error while generating the Document...</LOG>
</DOCUMENT_STATUS>
</BURS_REPORT>
Can anyone help on this please.can anyone help me?
-
Error while generating the Document... Bursting Status Report
Hey all,
I am getting some errors in a production environment when trying to burst out some invoice data.
This process has been pretty robust and out of 1000+ invoices a day, I can only find 4 that are failing regularily.
Why am I mentioning?, just to show that I am thinking this is a data issue, but just cannot see anything that stands out.
I can take the xml output and run it through my development suite on my local machine and all runs fine.
Just when it is running live through the db is when it fails.
Here is the Bursting output that shows the error....
<?xml version="1.0" encoding="UTF-8"?>
<BURS_REPORT>
<REQUESTID>27044820</REQUESTID>
<PARENT_REQUESTID>27044726</PARENT_REQUESTID>
<REPORT_DESC>Invoice Print Selected Invoices</REPORT_DESC>
<OUTPUT_FILE>[$OUT_DIR]/o27044820.zip</OUTPUT_FILE>
<DOCUMENT_STATUS>
<KEY></KEY>
<OUTPUT_TYPE>pdf</OUTPUT_TYPE>
<DELIVERY></DELIVERY>
<OUTPUT></OUTPUT>
<STATUS>fail</STATUS>
<LOG>Error while generating the Document...</LOG>
</DOCUMENT_STATUS>
</BURS_REPORT>
The problem is that this output doesn't necessarily help, nor can I find any hints in the OPP logs.
So... the question becomes...
Any ideas on where I can look to resolve this issue?+
Or where I can find any clues at, that would possible point at the issue?+
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
BI Publisher 5.6.3
Thanks
Hayden,Tim,
Thanks for the suggestion, always seems to slip my mind that the Bursting Report has debug on it.
As far as what is generating the XML, it is oracle's standard, only slightly modified ... ;), invoice generating report, RAXINV_SEL.
Well RAXINV_SEL, or RAXINV_NEW, doesn't matter, same code, that is the executable.
I have turned on the debug, for both the source xml and the burst request, and unfortunately, still nothing stands out to me.
I was really expecting to see something in the burst log, pasted at the bottom...
but, it yet avoids me.
If I had to guess, I would bet the user went, in our terminology, "slashwit crazy", or example "model /w options", in some description.
But can't seem to find which field it is blowing up on, since we are catching these special characters in several places already, and slashwit is littered throughout the output.
I was also looking in the bursting control file for the special xml tags identified there, as those would require no slashes. But those are all clean.
Hayden,
XML Publisher: Version : 11.5.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XDOBURSTREP module: XML Publisher Report Bursting Program
Current system time is 21-SEP-2009 10:43:12
XML/BI Publisher Version : 5.6.3
Request ID: 27048106
All Parameters: ReportRequestID=27044726:DebugFlag=Y
Report Req ID: 27044726
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:{node}
Preparing parameters
null output =/u007/app/applmgr/{instance}/out/{instance}/o27048106.out
inputfilename =/u007/app/applmgr/{instance}/out/{instance}/o27044726.out
Data XML File:/u007/app/applmgr/{instance}/out/{instance}/o27044726.out
Set Bursting parameters..
Temp. Directory:/u007/app/applmgr/{instance}/temp
[092109_104315337][][STATEMENT] Oracle XML Parser version ::: Oracle XDK Java 9.0.4.0.0 Production
[092109_104315340][][STATEMENT] setOAProperties called..
Bursting propertes.....
{burstng-source=EBS, font.Free 3 of 9.normal.normal=truetype./usr/java/jre/lib/fonts/FREE3OF9.TTF, font.Times New Roman.normal.normal=truetype./usr/java/jre/lib/fonts/TIMES.TTF, system-temp-dir=/u007/app/applmgr/{instance}/temp, font.Arial.italic.normal=truetype./usr/java/jre/lib/fonts/ARIALI.TTF, user-variable:cp:parent_request_id=27044726, user-variable:cp:application_short_name=XDO, font.Courier New.normal.bold=truetype./usr/java/jre/lib/fonts/COURBD.TTF, font.Times New Roman.normal.bold=truetype./usr/java/jre/lib/fonts/TIMESBD.TTF, user-variable:cp:request_id=27048106, font.Arial.normal.normal=truetype./usr/java/jre/lib/fonts/ARIAL.TTF, font.Courier New.normal.normal=truetype./usr/java/jre/lib/fonts/COUR.TTF, user-variable.OA_MEDIA=http://diierp.corio.com:8002/OA_MEDIA, font.Courier New.italic.bold=truetype./usr/java/jre/lib/fonts/COURBI.TTF, user-variable:cp:org_id=83, user-variable:cp:DebugFlag=Y, font.Times New Roman.italic.bold=truetype./usr/java/jre/lib/fonts/TIMESBI.TTF, user-variable:cp:responsibility=51270, font.Arial.italic.bold=truetype./usr/java/jre/lib/fonts/ARIALBI.TTF, font.Courier New.italic.normal=truetype./usr/java/jre/lib/fonts/COURI.TTF, user-variable:cp:user=HAYDEN, user-variable:cp:reportdescription=Invoice Print Selected Invoices, user-variable:cp:language=en, font.Times New Roman.italic.normal=truetype./usr/java/jre/lib/fonts/TIMESI.TTF, user-variable:cp:ReportRequestID=27044726, user-variable:cp:locale=en-US, user-variable:cp:territory=US, font.Arial.normal.bold=truetype./usr/java/jre/lib/fonts/ARIALBD.TTF}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
Start of log messages from FND_FILE
End of log messages from FND_FILE
Executing request completion options...
------------- 1) PUBLISH -------------
Beginning post-processing of request 27048106 on node {node} at 21-SEP-2009 10:43:19.
Post-processing of request 27048106 completed at 21-SEP-2009 10:43:20.
Finished executing request completion options.
Concurrent request completed
Current system time is 21-SEP-2009 10:43:20
--------------------------------------------------------------------------- -
Error while activation the Datastore Object
Hi folks,
I am in SAP BASIS, so not aware of BI very much...can u help me in this,
One user is getting error while activation the Datastore Object
below is error log,
(Green) Activation of Objects with Type DataStore Object
(Green) Checking Objects with Type DataStore Object
(Green) Checking DataStore Object DSO_TEST
(Green) DataStore object DSO_TEST is consistent
Table/view /BIC/VDSO_TEST2 (type VIEW) from DataStore object DSO_TEST saved
Change log for DataStore object "DSO_TEST" saved successfully
Writing of object catalog entries (TADIR)
(RED) The creation of the export DataSource failed
(RED) Error during the retrieval of the logon data stored in secure storage
(RED) Error when creating the export DataSource and dependent Objects
(RED) Error when activating DataStore Object DSO_TEST
Thx. in advance
YashHi Yash,
Check out the below thread:
[activation of the Datastore Object.|error in ODS activation/export datasource;
Hope it helps you!
Please reward points if helpful
Manish -
Error while generating the context node
Hi ,
Requirement is to add the marketing attribute field under the Account details overview Page. As the field was not available in the context node i have added a new context node in the Account details. I used the wizard and added the context node BuilmktattributeRel so as i can add "Attribute set" under the BP overview page."
Now after adding the context node and while executing i am unable to see the overview view page, i am getting an error :
1. Component GET_ATTRIBUTE does not exist
2. Determination of BOL attributes failed
Also i am unable to regenrate the GET_I_method. If i want to delete the Zcontextnode, i am unable to do so.
Kindly help me with the technical approach to add the context node in the overview page.
Thanks in advance,
SunilOne thread would have been sufficient.
Error while generating the context node -
ODI 20088:Error While Generating The Scenario
Hi,
Today I have change the name my logical file schema(name is change to lower to upper case).Then select the new schema from File Model (only it is using the File Schema).Then Try to generate the scenario again but getting an error like this:
ODI 20088:Error While Generating The Scenario
java.lang.NullPointerException
at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatPopSourceSet(SnpGeneratorSQLCIT.java:7990)
at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatJobPopCollectionBuild(SnpGeneratorSQLCIT.java:7726)
at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.preComputePop(SnpGeneratorSQLCIT.java:7668)
at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatJobPop(SnpGeneratorSQLCIT.java:7568)
at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.treatPackageStep(SnpGeneratorSQLCIT.java:10477)
at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenPackageScenario(SnpGeneratorSQLCIT.java:2883)
at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenPackageScenario(SnpGeneratorSQLCIT.java:2817)
at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenScenSourceScenario(SnpGeneratorSQLCIT.java:11481)
at com.sunopsis.dwg.codeinterpretor.SnpGeneratorSQLCIT.mainGenScenSourceScenario(SnpGeneratorSQLCIT.java:11505)
at com.sunopsis.graphical.dialog.SnpsDialogScen.generateScen(SnpsDialogScen.java:190)
at com.sunopsis.graphical.scenario.DwgScenGeneratingWizard.generate(DwgScenGeneratingWizard.java:68)
at oracle.odi.ui.action.SnpsPopupActionGenerateScenHandler.actionPerformed(SnpsPopupActionGenerateScenHandler.java:103)
at oracle.odi.ui.SnpsActionControler.handleEvent(SnpsActionControler.java:86)
at oracle.ide.controller.IdeAction.performAction(IdeAction.java:529)
at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:897)
at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:501)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:809)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:850)
at java.awt.Component.processMouseEvent(Component.java:6297)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3275)
at java.awt.Component.processEvent(Component.java:6062)
at java.awt.Container.processEvent(Container.java:2039)
at java.awt.Component.dispatchEventImpl(Component.java:4660)
at java.awt.Container.dispatchEventImpl(Container.java:2097)
at java.awt.Component.dispatchEvent(Component.java:4488)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4575)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4236)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4166)
at java.awt.Container.dispatchEventImpl(Container.java:2083)
at java.awt.Window.dispatchEventImpl(Window.java:2489)
at java.awt.Component.dispatchEvent(Component.java:4488)
at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:668)
at java.awt.EventQueue.access$400(EventQueue.java:81)
at java.awt.EventQueue$2.run(EventQueue.java:627)
at java.awt.EventQueue$2.run(EventQueue.java:625)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:98)
at java.awt.EventQueue$3.run(EventQueue.java:641)
at java.awt.EventQueue$3.run(EventQueue.java:639)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:638)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Please Help
Thanks
AnindyaIf you have not deleted the old file schema, then it should have been work but it seems to be theissues with the link between interface and model .
I cannot say this is the actual reason but it might be. Since you have draged the file datastore to interface, interface is probably pointing to old schema and file model is pointing new schema.
I guess you have to recreate the interface again. Let me know how it is going with you
Bhabani
http://dwteam.in -
ERROR WHILE GENERATING THE PDF
HI gurus,
We are trying to publish BI reports in the Portal server as Iviews.
In the portal system, when I am clicking the PRINT VERSION button for the
CO cost center (area): Plan/actual: Quarterly iview, its giving the PDF file,
thats well and good.
<b>But when if I am doing the same thing for other iviews, for example: say the iview (COcost center range: Transaction Drill-down).
I am getting the ERROR WHILE GENERATING THE PDF</b>
The question is : <i>its working for some standard iviews and giving error message to other std. iviews.</i>
Please suggest how to resolve this issue.
Regards,
PrasadDear Prasad,
Did you resolve your problem, I have the similar one:
I need to print report made in BEx Report Designer and executed on Portal, but when I press Print Version button I am getting next message:
Error while generating PDF
Any information is much appreciated
Thanks in advance and best regards
Vladimir -
SWF error- while generating the flash files.
Post Author: [email protected]
CA Forum: Xcelsius and Live Office
Hi, in the old forum I came across the folowing topic: SWF error- while generating the flash files.
As I have the same problem, I would like to know the solution / answer / meaning please. What do I have to change in order to let in function properly again.
Thanks anyone.
Femke
(The post is from 3/6/2007)
The following error is generated upon generating the flash files Any insight???SWF error- while generating the flash files.--ErrorSWF Function Overflow. The generated SWF will not function correctly because data dependencies go beyond SWF limits.--
OK -Post Author: Andres
CA Forum: Xcelsius and Live Office
Hello.
I'm having the same problem. It appeared after I made use of many cells (a table of 10x200 cells) with formulas inside them.
Before that, while I was making my tests and only used a few cells and the .XLF file was 4Mb, I had no problem. Now that the .XLF file is 8Mb I see this error appearing (in Spanish):
"Error
Desbordamiento de la función SWF. El archivo SWF generado no funcionará correctamente ya que las dependencias de datos superan los límites de SWF."
Any idea of how this could be resolved (appart from using less data)?
Thanks in advance. -
Getting error in Portal "Error while generating the PDF" for BI Report
Hi Experts,
we are gettign the error while trying to generate the PDF file from the Reports.
Earlier it was working fine Adobe Reader 8 , currently we have upgrated Adobe Reader 9 in our system.
After this upggradation browser "*Failed to open PDF in Browser"*
Could you please suggest me how to diagnostic the error. Do we need to configre something in the Portal or in the Backend BI system for this.
Please suggest me the needful on this?
thanks
NarpalHello,
i am facing the same problem and found help by 925741:
"Error while generating PDF"
There is no more information available when clicking on the error.
Used Software:
Adobe 8
SAP_ABA 700 0018 SAPKA70018 Cross-Application Component
SAP_BASIS 700 0018 SAPKB70018 SAP Basis Component
SAP_BW 700 0020 SAPKW70020 SAP NetWeaver BI 7.0
PI_BASIS 2005_1_70 0018 SAPKIPYJ7I PI_BASIS 2005_1_700
BI_CONT 703 0013 SAPKIBIIQ3 Business Intelligence Content
Any other ideas?
Thanks,
Rainer
Edited by: Rainer SIGG on Mar 9, 2009 4:41 PM
Edited by: Rainer SIGG on Mar 9, 2009 5:27 PM
Edited by: Rainer SIGG on Mar 9, 2009 5:42 PM -
Errors while transporting the Business Content
hi all,
we are facing a few problems while transporting the Business Content from the Development systems to the Quality System.
it says Method Execution - Action Cancelled.
am pasting a part of the error messages also... kindly have a look at it and get back to us at the earliest as we are in the process of going-live...
Start of the after-import method for object type R3TR IOBJ (Activation Mode)
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
Interval 01 of number range RS_OBJNUMG is missing > Long text
InfoObject 0ACN_CATGRY (in compound of characteristic 0ACN_EANUPC) not (act.) available
Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available
Attribute 0ACN_DEAL from characteristic 0ACN_EANUPC not (actively) available
Attribute 0ACN_BRAND from characteristic 0ACN_EANUPC not (actively) available
Errors occurred during post-handling RS_AFTER_IMPORT for UPDR L
The errors affect the following components:
BW-WHM (Warehouse Management)
Ended with return code: ===> 12 <===
please revert bact at the earliest....
Thanks
Manickshi Manicks,
check if oss note 903291 helps
Transporting DataSources
Transport problem ...Urgent
Transport Issue
Number range object missing NRIV and cant activate IOBJ during import
try transaction rsrv ? >> all elementry tests >> master data >> compare number range and maximum sid >> execute. press button 'correct error' if any error exists.
also try >> all combined tests >> master data >> check master data for characteristics.
or run program RSDG_OBJNUMG_CREATE_INTERVAL
have a try oss note 903291 ?
Manual solution
Get the name of the number range object from the error message shown above, for example, RS_OBJNUMG. Start Transaction SNRO. To display the intervals, use the number range function key and enter the name of the number range object as the object name. Change the intervals. The following from-numbers and to-numbers apply:
- RS_OBJNUMG: 0000001 - 9999000
- RSDDAGCUBE: 100000 - 199999
- RSSBRAUTH: 00000001 - 99999999
BW 3.0B
Import Support Package 30 for 3.0B
BW 3.10 Content
Import Support Package 24
BW 3.50
Import Support Package 16
BW 7.0
Import Support Package 07
Maybe you are looking for
-
Can't get it to work!!! Please help with IllegalBlockSizeException
I have tried several things, I have searched the forume many times ever since yesterday, but I just can't figure this out. Here is my method to encrypt: private void encryptPassword(String p) try{ //generate key using DES algorithm byte key[] = "abab
-
Kernel panic when I connect seagate raid
I've updated my OS to 10.9. Every time I even plug in my 2 drive, 3 TB Seagate for Mac RAID1 the system crashes and comes back up with (what appears to be) a kernel panic. Any insights?
-
How do I create a pdf from an xps doc?
How do I create a pdf from an xps doc?
-
Using Oracle Stored Procedure in Interactive Reporting
Hello, i'm trying to use Oracle Store procedure in Interactive reporting but all i get are errors. My env: Interactive Reporting 9.3.1 Oracle Database 10.2 I created OCE as ODBC/OBDC. Tables are returned and Stored Procedure entry is enabled. If i us
-
With my new PC Windows 8 I am not able to save my photos on my I-pod touch (latest IOS 4.2.1) Help