Error while importing Item Master data through DTW

Hello Expert,
I trying to import item master data through DTW but it gives an error while importing as shown in attach file..
Please help me...
I am using SAP 9.0 Pl 6
Regards,
Sandy

Hi Sandy,
Kindly follow the check list
1. Right Click DTW and run it as Administrator.
2. Is your DTW version is same as SAP B1.
3. Uninstall and re-install DTW.
4. If you are using 64-bit DTW, try to use 32-bit one.
5. Check the Template, is it of the same DTW version.
6. Remove all the unnecessary columns.
7. Last try different Template extension.. (e.g: CSV (Comma delimited), or Text (Tab delimited))
Hope you find this helpful......
Regards,
Syed Adnan

Similar Messages

Error while importing Item MAster Data using DTW

Hi,
when we are importing item master data using items template
it is giving error.
Error:":connected value 1 was not found "
can any one send the oitems template that is working fine wthout any error.
Thanks,
Neetu

You cannot import data prepration templates>>Testcase1_Test Data for Import function>Oitems directly.
You will have to do certain prerequisites like setting CommissionGroup, CommissionPercent, CommissionSum,CustomsGroupCode etc., in SAP before importing Items.
So I would like you to try out with minimum fields in the template and import. After understanding, you can import the required fields.
I suggest you to use the template from "C:\Program Files\SAP\Data Transfer Workbench\Templates\Templates\oItems"

Error while loading customer master data through Idoc (DEBMAS) from BODS

Hi All,
I am trying to load customer master data from BODS to SAP ECC through IDOC(DEBMAS). The jobs run successfully but IDOC is not getting posted. Please find the error below.
I checked in TSKD table the entry 0 is present. Please help me to resolve this issue.
Thanks & Regards,
Balamurugan G

Hi, did you referred this link : Error during customer master mass update through XD99

Bank problem while importing BP master data

Hi
im importing BP master data.before importing i've given 3 banks in the system.now in temp for
house bank and default bank i've given "-1".
error is [OCRD.BankCode]Application-defined or object-defined error65171
Please solve it.

hello Friend,
first off all please try to import BP master data without the define bank in to template... is that upload or no...
once BP upload into the system.
then upload the bank with the BP Code and update the master data through DTW....
Regards,
Sham Vithal

Error While Uploading GL Master Data in LSMW

Hello Experts,
I am running into error while uploading GL master data in LSMW, I created recording through FS00, then I mapped the fields, it all went good till 13th step, but last step got stuck(Run Batch Input Session), when I am running batch input session, system is showing this message "Function Code cannot be selected"
Your help would be highly appreciated.
Regards
Muhammad Yousuf Ali
SAP FI Consultant

Hi,
first can you pls check your Hierarchy mode setting in FS00 - before executing Batch input session -
Open FS00 - go to settings - and Do not display navigation tree select radio button and save it
then Now Run fresh LSMW - your issue will resolve
Mahesh

Error in Uploading BP Master Data in DTW

Hi there.
I'm now updating our business partner master data using DTW and i encountered an error "No matching records found (ODBC-2028) Application-defined or object-defined error 65171".
Pls help me. Thanks
des'

Hi
Some of the helpful tips :
1- Create the data import file as usual in Excel
2- Save the file as .txt (tab delimited)
3- Select all columns and rows from the Excel file (including the headings)
4- Copy the data into the clipboard
5- Open a new text file in Notepad
6- Paste the data and save the file
7- Import this file with DTW
Also check this notes :
How to import BP addresses and set the default
Note 979116
Hope this helps
Bishal

Getting error while uploading gl master data using LSMW batch input data

Hi Experts,
I am getting error while uploading the GL master data through lsmw using batch input recording.
After completion of all steps at the time of running batch input session error i am getting is "maintain EN language discription"
and Pls tell me is it possible to upload transactional data using lsmw? if yes pls explaing briefly.

Hello,
Kindly post in the FI forum to get a better response.
Regarding the issue you might check whether the correct column is being picked up where you have maintained the description.
Kind Regards // Shaubhik

Runtime error while creating material master data

hello sir,
i am facing one prolem while creating MATERIAL MASTER DATA.
AFTER GIVING ALL REQUIRED INFORMATION WHEN I AM GOING TO SAVE THE DOCUMENT ITS SHOWING ABAP RUNTIME ERROR.
MESSAGE TYPE: - MDS_KEYMAP.
MESSAGE CLASS: 001.
PLEASE TELL ME WHAT TO DO?
REGARDS..

SIR THANK YOU FOR YOUR REPLY.
I ALREADY DONE THAT DUMP ANALYSIS.
SO PLEASE KINDLY GIVE ME IN DETAILS ABOUT THAT SOLUTION...

Error while uploading HR master data from inQuality server

Hi, Expert. While uploading of MAster data from Developement to Quality by BDC. When program starts for Tcode PA40, selecting Hiring Action, it is goining to the Action Screen. Here while taking the position from HR template, it gives error as Position is not in Table T428B. Payroll area on the date (Date of original hiring, of the person) it is taking DM as defalt in place of our created Area and terminating. When i am trying entering the data manually, it is giving same error for Position. I am not able to upload the data. Kindly help me by suggesting me the correct sequence and steps for uploading the data. Correct answer will be provided with STARSSSSSS **. Regds Punit.

Have all your configurations been transported to Quality?
Have you created the positions before initiating BDC for Hiring?
Check Feature ABKRS in Quality. Is this same as in Development?
Is your BDC running OK in Development?
Regards,

Error while Importing Vendor Master records

I get the following error when importing vendor Master records into the MDM repositorry
Cannot import qualifiers because the qualified lookup field is not mapped.
I noticed that the file I'm importing contains 1000 vendors. However the qualified lookup table "PHONE" for the vendors contain only 388 records.
After I imported the records I found that there was only 389 records in the repository.
I'm using standard map provided by SAP.
I ran the import again but this time I unmapped all fields for the qualified update.
Now the Import Manager uploaded the remaining 613 records.
I would like to know whether how I can load 1000 records in one load rather than having to go through the file twice.
This is important since I want to use the import manager server for my loads.
Thanks
manoj

Hi Manoj,
Try the following options.
1. In the Import Manager, Select Configuration->Options
set <b>"Merge qualified links using matching qualifiers value to Off"</b>
2. In the Map Fields/Values tab in Import manager, select the qualified field in which you are trying to import, right clik on the field->select Set Qualified Update -> Update -> Select All available qualifiers into Matching qualifiers->
New Links- Create
Existing Links -> Update (All Mapped Qualifiers).
Hope this should solve your problem.
Thanks and Regards
Subbu.

Error while creating customer master data

dear sir,
i have created customer master and maintined all level general,compnay code and sales level data.and again deleted all areas thru t-code XD06.and thru se16n i have deleted the entires in kna1 knb1 knvv table
again while creating one with same name showing error while maintaing sales level data
Check: Table KNA1 does not exist, table KNVI does
Message no. F2061
plz help how do i rectify this problem and maintain the same cutomer no (external) again.
regards,
Debesh

Hi,
you did the wrong thing, don't remove the entries from standard table like KNA1, KNVV etc, SAP will maintained the entries in lot of tables same time.
XD06 is used to set delete indicator, after wards you may create new customer master, if any problem for name you may change the name field as 'delete' for old customer.
Now to solve your issue, i believe you need to first save the entries with maintainace of general data (KNA1) and then use XD02 to maintain the Sales area data, pl try this way it should work.
If this way will not work, pl maintain the tax indicator in table KNVI manually to solve the issue.
regards
Vivek.
Edited by: Vievk Vardhan on Dec 7, 2009 6:41 PM

Error while importing the user Records through SCC7

Hi Basis Gurus,
We are doing the post DB Refresh Activities for a Sandbox .
Refresh is done from D21 to S21.
We are stuckup with an error while importing the user Records(scc7).
The exported user records request from D21 is dumped in the trans directory of S38 and imported in to S21 using TP commands at O/S level. The import is done successfully( RC 4 with warnings).
But now when we run SCC7 (post import activities) in the background the process is getting cancelled right in the begining.
Error Occured in SCC3 log
Table logging disabled in program RSCLXCOP by user SAP*"
R/3 Version is 4.6C OS:AIX5.3
Your suggestions will be highly appreciated.
Regards,
Sitaram

Hey Sitaram,
I looks like you have incorrect parameters of client copy in the S21 system.
You can change the parameters in S21 system,
by executing report RSCLXCOP (via transaction SE38 or SA38) in S21.
Search parameters that related to table logging/sap*
good luck!

Error while Import of OBIEE_Navteq Data

hi,
I have encountered some errors while importing the standard MAPviewer metadata dump from the oracle site into the AIX database
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
With the Partitioning option
Export file created by EXPORT:V11.01.00 via conventional path
import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
. importing OBIEE_NAVTEQ's objects into OBIEE_NAVTEQ
IMP-00060: Warning: Skipping table "OBIEE_NAVTEQ"."AOI_POINT" because object type "MDSYS"."SDO_ORDINATE_ARRAY" does not exist or has different identifier
IMP-00060: Warning: Skipping table "OBIEE_NAVTEQ"."AOI_POLY" because object type "MDSYS"."SDO_ORDINATE_ARRAY" does not exist or has different identifier
IMP-00060: Warning: Skipping table "OBIEE_NAVTEQ"."BLOCK_GROUP" because object type "MDSYS"."SDO_ORDINATE_ARRAY" does not exist or has different identifier
IMP-00060: Warning: Skipping table "OBIEE_NAVTEQ"."COUNTY" because object type "MDSYS"."SDO_ORDINATE_ARRAY" does not exist or has different identifier
IMP-00060: Warning: Skipping table "OBIEE_NAVTEQ"."EDGE" because object type "MDSYS"."SDO_ORDINATE_ARRAY" does not exist or has different identifier
please suggest any solution for the above error.
Cheers
Ankit
Edited by: AnkitR Gupta on Jun 27, 2011 10:40 PM
Edited by: AnkitR Gupta on Jun 27, 2011 10:43 PM

Hi Nawneet ,
I have import snapshot successfully, please make sure below points
1. make sure all connected users, should be disconnect the owb. if any user connect the owb you will face below error
MDL1325: Metadata Loader export/import for a snapshot cannot be executed while other user(s) are accessing the OWB repository.
2. Object name cannot be restored from snapshot , because another identically named object with in same namespace context already exists.
Regards,
Venkat

Issue importing item master data. Help!

Hello All,
I;m fairly new to B1, looks like a great product.
Im having some issues importing master data using the data import tool under the administraion module.
I have a list of items, and it will only import the last row. The log error says " Character number is greater than allowed" on all other rows/items.
It's weird because all fields match perfectly, and if I put 1 row/item it uploads perfectly. Only errorss when I have more than 1 row.
Any help would be wonderful!
Thanks,
-Jon

Hello John,
You may check this thread:
data import through excel
Thanks,
Gordon

Error while Updating the TIN No through DTW

Hi,
When i try to update the TIN Number through DTW .....i'm experiencing the Error--
DELETING ROWS NOT SUPPORTED FOR OBJECT FISCAL ID'S FOR BP MASTER DATA APPLICATION-DEFINED OR OBJECT DEFINED ERROR 65171
My Template is like this....
ParentKey
LineNum
Address
TaxId11
CardCode
LineNum
Address
taxId11
S000001
0
bo_ShipTo
1234567892
What could be the reason for the error..?

Hi,
Please check the following thread:
http://scn.sap.com/thread/1967643

Error while importing Item Master data through DTW

Similar Messages

Maybe you are looking for