Error while importing LSMW (Errro in Table /SAPDMC/LSMCUST)

Hi Experts,
I was trying to Export and import a LSMW in quality system and came across with the below error. Any idea why it is happening. The recording, field mapping and conversion rules are not getting copied properly.
Errro in table /SAPDMC/LSMCUST
Br/Manas

Hi,
When you are exporting the LSMW click the recording name for the including the exporting. Field mapping you have to do after importing.
Regards
Sabu

Similar Messages

  • Error while import objects:view or table

    Action: Right click on views under the module tree. select import menu. select view checkbox. Click on view (trying to import view)
    API2206:Connection to source failed.
    ORA-02019:Connection descriptor for remote database not found.
    The error is so obvious, but I can not figured out what's run on my setup. Can anyone help? Did I miss anything else? Thanks.
    This project runs OK in owb 9i. I imported the mdl to owb client 10g.
    Create location, connector, deploy and register to runtime on 10g instance OK. Create a runtime and connection through deployment manager is OK.
    Property of this module is updated with the new location.Source for metadata import is through dictionary.

    Hi,
    Do you know what's the "connection descriptor" the error msg is referring to? I thought it may be the connector. But it's set OK.
    Under the "connection" tab from the module property, I check the first checkbox, Oracle Data Dictionary, for Source for Metadata Import. It's working OK before.
    Thanks.

  • Error while importing a table index.

    Hi,
    We are facing a problem while importing an index to the production region. Below are the details.
    1. A secondary index was created on standard SAP table ILOA in DEV region.
    2. The Index was successfully moved to the Quality system, without any glitches.
    3. Due to some issue (releated to testing, for which we had to revert back the changes), we had to delete the index on ILOA in the DEV region. The transports were moved to the PPD region and hence, the index on ILOA was deleted in PPD also.
    4. Once the issue related to testing was resolved, we again created an index on the table ILOA and moved it to PPD.
    All these 4 mentioned steps happened successfully and in PPD there was no error while importing the transports.
    But, while moving the above transports to the Production region, there was an error :
    "Index ILOA~Y could not be activated
    (E - No index ILOA~Y found with status M)"
    Please note that Y is the name of the index that was created on the table ILOA.
    The error code that we have got is "8".
    Can anyone please shed any light on what the issue is?? WE cannot re-import the transports in to Production without analysing this issue,because our client doesnt permit that.
    Thanks and eagerly awaiting a kind reply.
    Regards,
    Raghavendra.

    You've three transports - one to create the index, one to delete, and one to recreate.  It could be that the the third one tried to run before the database had finished with the second?
    Have you looked on SE14 for the actual status on production of the index?
    matt

  • Connection Failed Error while Importing tables in 11.1.1.6 on Windows 7

    Hi,
    Can you please help me in resolving the connection failed error while importing the tables from the database.
    I am using OBI 11.1.1.6 on Windows 7
    You help is highly appreciated. I have followed all the below blogs but still i was not able to resolve the issue.
    http://123obi.com/2011/03/error-the-connection-has-failed-in-obiee-11g/
    http://obieedeveloper.blogspot.in/2012/03/connection-failed-error-in-obiee-11-g.html
    http://iadviseblog.wordpress.com/2011/05/29/obiee-11g-error-in-importing-metadata/
    http://www.obieefans.com/%E2%80%9Cthe-connection-has-failed%E2%80%9D-error-in-obiee-11g-admin-tool/
    Thanks in Advance
    Siva

    It would be nice if you put your issues instead of asking to look those many urls.
    try using tns entry in connection pool or follow this thread
    Connection failed in OBIEE 11g

  • "Failed to perform requested action" error while importing table in P.Layer

    HI
    I have encountered an error while importing the table into physical layer of the repository. When I select the table and click the 'move the selected' button it is throwing this error "Failed to perform requested action". I didn't understand what does it mean, even it is not giving any error code but when I try to import other tables it is working fine. Please help me to solve this if someone has any idea. Thanks.

    Hi Srinivas,
    I think you want to do JDBC lookup.. you must have created the JDBC receiver communication channel. As your communication channel is correct and still you are getting Table not found error.. Check following steps.
    - Check that your Communication channel is activated and working fine.
    - Check that the ID which you are using in JDBC receiver is having proper authorization to import the table definition.
      Just check with all authorization.
    I think the problem is with insufficient authorization to User ID used on JDBC communication channel.
    Thanks,
    Bhupesh.

  • "table is in wrong order" error while importing xml...

    Hi everyone,
    We are currently working in XML workflow in InDesign CS4. We are facing some problem in table part. We are converting CALS xml tables to InDesign table format, error appears in some of the tables while importing into InDesign, like "table is in wrong order".
    How can i find the exact errors in the tables? Specifically i have to find which cells giving trouble. Herewith i attached the sample xml file for your references.
    Can anyone look into this and help me out. Also suggest me to resolve this issue.
    Thanks and regards
    Thiyagu

    Hi TurtleCruiser,
    Its working fine. Thanks for your great help.
    Thiyagu

  • Error while importing a dump file in my local database

    Hi,
    I have a dump file named *"system_21Sep2010_DVSD.DMP"* which i'm trying to import in my local database named *"nandita1"*.
    The dump file is found under the following path *"C:\DevSuiteHome_1\BIN"* and i executed the following command for importing the dump file:
    C:\DevSuiteHome_1\BIN>imp system/system@nandita1 FILE=system_21Sep2010_DVSD.DMP FULL=YES
    I'm getting the following error while importing the dump file:
    Import: Release 10.1.0.4.2 - Production on Wed Oct 6 16:25:37 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
    tion
    With the Partitioning, OLAP and Data Mining options
    Export file created by EXPORT:V10.01.00 via conventional path
    import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    IMP-00015: following statement failed because the object already exists:
    "CREATE UNDO TABLESPACE "UNDOTBS1" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DV"
    "SD/undotbs01.dbf' SIZE 104857600 AUTOEXTEND ON NEXT 5242880 MAXSIZE "
    "32767M EXTENT MANAGEMENT LOCAL "
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "SYSAUX" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/sysa"
    "ux01.dbf' SIZE 367001600 AUTOEXTEND ON NEXT 10485760 MAXSIZE 32767M "
    "EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANA"
    "GEMENT AUTO"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TEMPORARY TABLESPACE "TEMP" BLOCKSIZE 8192 TEMPFILE '/oradata_dev/D"
    "VSD/temp01.dbf' SIZE 20971520 AUTOEXTEND ON NEXT 655360 MAXSIZE 3276"
    "7M EXTENT MANAGEMENT LOCAL UNIFORM SIZE 1048576"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "USERS" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/users"
    "01.dbf' SIZE 5242880 AUTOEXTEND ON NEXT 1310720 MAXSIZE 32767M EXTEN"
    "T MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANAGEMEN"
    "T AUTO"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "XX_DATA" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/XX_"
    "DATA01.dbf' SIZE 140509184 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M"
    " EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT "
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "XX_INDEX" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/XX"
    "_INDEX.dbf' SIZE 93323264 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M "
    "EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT "
    IMP-00015: following statement failed because the object already exists:
    "CREATE PROFILE "MONITORING_PROFILE" LIMIT COMPOSITE_LIMIT DEFAULT SESSIONS_"
    "PER_USER DEFAULT CPU_PER_SESSION DEFAULT CPU_PER_CALL DEFAULT LOGICAL_READS"
    "_PER_SESSION DEFAULT LOGICAL_READS_PER_CALL DEFAULT IDLE_TIME DEFAULT CONNE"
    "CT_TIME DEFAULT PRIVATE_SGA DEFAULT FAILED_LOGIN_ATTEMPTS UNLIMITED PASSWOR"
    "D_LIFE_TIME DEFAULT PASSWORD_REUSE_TIME DEFAULT PASSWORD_REUSE_MAX DEFAULT "
    "PASSWORD_LOCK_TIME DEFAULT PASSWORD_GRACE_TIME DEFAULT"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "OUTLN" IDENTIFIED BY VALUES '4A3BA55E08595C81' TEMPORARY TABLE"
    "SPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "TSMSYS" IDENTIFIED BY VALUES '3DF26A8B17D0F29F' DEFAULT TABLES"
    "PACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "ANONYMOUS" IDENTIFIED BY VALUES 'anonymous' DEFAULT TABLESPACE"
    " "SYSAUX" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "OLAPSYS" IDENTIFIED BY VALUES '3FB8EF9DB538647C' DEFAULT TABLE"
    "SPACE "SYSAUX" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "MDDATA" IDENTIFIED BY VALUES 'DF02A496267DEE66' DEFAULT TABLES"
    "PACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "SYSMAN" IDENTIFIED BY VALUES '28F72A3C2D75FDE9' DEFAULT TABLES"
    "PACE "SYSAUX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "MGMT_VIEW" IDENTIFIED BY VALUES '442167C25FAC883C' TEMPORARY T"
    "ABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "SCOTT" IDENTIFIED BY VALUES 'F894844C34402B67' DEFAULT TABLESP"
    "ACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "BUXXDDWA" IDENTIFIED BY VALUES '2672292A792DB64B' DEFAULT TABL"
    "ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXDDWA" IDENTIFIED BY VALUES 'F5C178B2796496F4' DEFAULT TABLES"
    "PACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "BUXXDDWS" IDENTIFIED BY VALUES '06D47E0665132890' DEFAULT TABL"
    "ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "BUXXSUC" IDENTIFIED BY VALUES '1705C688518ADCDC' DEFAULT TABLE"
    "SPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "JIRAUSER" IDENTIFIED BY VALUES 'F0E1C662FCD1E09F' DEFAULT TABL"
    "ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXSFA" IDENTIFIED BY VALUES 'C3DFA37A29E072B6' DEFAULT TABLESP"
    "ACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXDDW" IDENTIFIED BY VALUES 'CFF3D9B1B6C20DCC' DEFAULT TABLESP"
    "ACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXDDWS" IDENTIFIED BY VALUES '9EF0EE1BAC5855C4' DEFAULT TABLES"
    "PACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXSUC" IDENTIFIED BY VALUES '39594B53A6F1CED0' DEFAULT TABLESP"
    "ACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "SELECT_CATALOG_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "SELECT_CATALOG_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "EXECUTE_CATALOG_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "EXECUTE_CATALOG_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "DELETE_CATALOG_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "DELETE_CATALOG_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "RECOVERY_CATALOG_OWNER""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "RECOVERY_CATALOG_OWNER" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "GATHER_SYSTEM_STATISTICS""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "GATHER_SYSTEM_STATISTICS" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "LOGSTDBY_ADMINISTRATOR""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "LOGSTDBY_ADMINISTRATOR" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "AQ_ADMINISTRATOR_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "AQ_USER_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "AQ_USER_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "GLOBAL_AQ_USER_ROLE" IDENTIFIED GLOBALLY "
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "SCHEDULER_ADMIN""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "SCHEDULER_ADMIN" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "HS_ADMIN_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "HS_ADMIN_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "AUTHENTICATEDUSER""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "AUTHENTICATEDUSER" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OEM_ADVISOR""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OEM_ADVISOR" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OEM_MONITOR""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OEM_MONITOR" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "WM_ADMIN_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "WM_ADMIN_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVAUSERPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVAUSERPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVAIDPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVAIDPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVASYSPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVASYSPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVADEBUGPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVADEBUGPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "EJBCLIENT""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "EJBCLIENT" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVA_ADMIN""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVA_ADMIN" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVA_DEPLOY""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVA_DEPLOY" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "CTXAPP""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "CTXAPP" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "XDBADMIN""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "XDBADMIN" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "XDBWEBSERVICES""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "XDBWEBSERVICES" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OLAP_DBA""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OLAP_DBA" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OLAP_USER""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OLAP_USER" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "MGMT_USER""
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "MVIEW$_ADVSEQ_GENERIC" MINVALUE 1 MAXVALUE 4294967295 INCR"
    "EMENT BY 1 START WITH 1 CACHE 50 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "MVIEW$_ADVSEQ_ID" MINVALUE 1 MAXVALUE 4294967295 INCREMENT"
    " BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "LOGMNR_EVOLVE_SEQ$" MINVALUE 1 MAXVALUE 999999999999999999"
    "999999999 INCREMENT BY 1 START WITH 1 CACHE 20 ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "LOGMNR_SEQ$" MINVALUE 1 MAXVALUE 9999999999999999999999999"
    "99 INCREMENT BY 1 START WITH 1 CACHE 20 ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "LOGMNR_UIDS$" MINVALUE 1 MAXVALUE 999999999999999999999999"
    "999 INCREMENT BY 1 START WITH 100 CACHE 20 ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_FLAVORS_S" MINVALUE -2147483647 MAXVALUE 214748364"
    "7 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_FLAVOR_NAME_S" MINVALUE 1 MAXVALUE 999999999999999"
    "999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_REPPROP_KEY" MINVALUE 1 MAXVALUE 99999999999999999"
    "9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT_LOG_SEQUENCE" MINVALUE 1 MAXVALUE 99999999999999999"
    "9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_REFRESH_TEMPLATES_S" MINVALUE 1 MAXVALUE 999999999"
    "999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_USER_AUTHORIZATIONS_S" MINVALUE 1 MAXVALUE 9999999"
    "99999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_REFGROUPS_S" MINVALUE 1 MAXVALUE 99999999"
    "9999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_OBJECTS_S" MINVALUE 1 MAXVALUE 9999999999"
    "99999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_PARMS_S" MINVALUE 1 MAXVALUE 999999999999"
    "999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_USER_PARM_VALUES_S" MINVALUE 1 MAXVALUE 9999999999"
    "99999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_SITES_S" MINVALUE 1 MAXVALUE 999999999999"
    "999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMP_OUTPUT_S" MINVALUE 1 MAXVALUE 999999999999999"
    "999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_RUNTIME_PARMS_S" MINVALUE 1 MAXVALUE 9999999999999"
    "99999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "TEMPLATE$_TARGETS_S" MINVALUE 1 MAXVALUE 99999999999999999"
    "9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_EXCEPTIONS_S" MINVALUE 1 MAXVALUE 9999999999999999"
    "99999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    . importing OLAPSYS's objects into OLAPSYS
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "OLAP_ID_SEQ" MINVALUE 1 MAXVALUE 9999999999999999999999999"
    "99 INCREMENT BY 1 START WITH 122 NOCACHE NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "OLAP_IRID" MINVALUE 1 MAXVALUE 999999999999999999999999999"
    " INCREMENT BY 1 START WITH 24 NOCACHE ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "CWM2_OLAP_ENABLESEQ" MINVALUE 1 MAXVALUE 9999 INCREMENT BY"
    " 1 START WITH 1 NOCACHE ORDER CYCLE"
    I've been waiting for hours, but still it is blocked at the same place, that is:
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "CWM2_OLAP_ENABLESEQ" MINVALUE 1 MAXVALUE 9999 INCREMENT BY"
    " 1 START WITH 1 NOCACHE ORDER CYCLE"
    I've tried recreating the database, but still the error is the same.
    I've tried including the ignore=Y, that is:
    C:\DevSuiteHome_1\BIN>imp system/system@nandita1 FILE=system_21Sep2010_DVSD.DMP
    FULL=YES IGNORE=YES
    The error generated is as displayed below:
    Import: Release 10.1.0.4.2 - Production on Wed Oct 6 16:34:04 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
    tion
    With the Partitioning, OLAP and Data Mining options
    Export file created by EXPORT:V10.01.00 via conventional path
    import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    . importing OLAPSYS's objects into OLAPSYS
    Over here also, i had to kill the process since it was blocked at the following statement: ". importing OLAPSYS's objects into OLAPSYS"
    Please can someone help me out.
    Thanking in advanced

    plzzzzzzzzzzzzzzzzz.............sme1 help me out

  • Error while importing 10.2.0.3 dumpfile on 11.2.0.1Database

    Hi All,
    I am getting the below error while importing an 10g dump on an 11g Database.
    The command which i am executing is
    C:\Users>impdp directory=TEST_DIR parallel=4 dumpfile=TEST_%U.dmp logfile=TEST.log schemas=TEST
    The Error is :
    ORA-39002: invalid operation
    ORA-31694: master table "SYS"."SYS_IMPORT_SCHEMA_01" failed to load/unload
    ORA-02354: error in exporting/importing data
    ORA-02368: the following file is not valid for this load operation
    ORA-02369: internal number in header in file H:\TEST\TEST_03.dmp is not valid
    Which means TEST_03.dmp is not valid but when i am executing the same Import by using the below command
    C:\Users>impdp directory=TEST_DIR parallel=4 dumpfile=TEST_01.dmp,TEST_02.dmp,TEST_03.dmp,TEST_04.dmp logfile=TEST.log schemas=TEST
    Is Throwing an error as
    ORA-39001: invalid argument value
    ORA-39000: bad dump file specification
    ORA-31619: invalid dump file "H:\TEST\TEST_04.dmp"
    So i am confused that in previous command it was stating TEST_03.dmp is not valid and in above command it throwing error as TEST_04.dmp is valid.
    Can anyone help me why there is such discrepencies in it while i am running the same commands.
    Thanks
    Snehasis.

    Hi,
    I would think that all the files are 'bad' in some way but the command is just accessing the files in a different order when run in the two different ways. All the files have to be read at the initial phase of the import.
    I think you'll likely find that if you change the order of the files in your second command the bad file will be reported as a different file - oracle often validates things from right to left.
    The % option is probably ordering the files in some random sequence and it just so happened that TEST03.dmp was checked first.
    The most likely cause of the error is that the files were transferred to the server in the correct ftp mode.
    Cheers,
    Harry

  • Error while importing data into Oracle 11gr2 with arcsde 9.3.1

    I am getting error while importing the data into oracle 11g r2. We are using arcsde 9.3.1
    It seems to be having some problem with spatial index creation.
    kindly help
    IMP-00017: following statement failed with ORACLE error 29855:
    "CREATE INDEX "A3032_IX1" ON "DGN_POLYLINE_2D" ("SHAPE" ) INDEXTYPE IS "MDS"
    "YS"."SPATIAL_INDEX""
    IMP-00003: ORACLE error 29855 encountered
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-13249: internal error in Spatial index: [mdidxrbd]
    ORA-13249: Error in Spatial index: index build failed
    ORA-13249: Error in spatial index: [mdrcrtxfergm]
    ORA-13249: Error in spatial index: [mdpridxtxfergm]
    ORA-13200: internal error [ROWID:AAAT5pAA9AACIy5AAQ] in spatial indexing.
    ORA-13206: internal error [] while creating the spatial index
    ORA-13033: Invalid data in the SDO_ELEM_INFO_ARRAY in SDO_GEOMETRY object
    ORA-06512: at "MDSYS

    Guys,
    I am also getting the same error and also my issue is like I am not even to analyze for which indexes I am getting error. It does not hve any indx name before error.
    Processing object type DATABASE_EXPORT/SCHEMA/TABLE/INDEX/DOMAIN_INDEX/INDEX
    ORA-39083: Object type INDEX failed to create with error:
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-13249: internal error in Spatial index: [mdidxrbd]
    ORA-13249: Error in Spatial index: index build failed
    ORA-13249: Error in spatial index: [mdrcrtxfergm]
    ORA-13249: Error in spatial index: [mdpridxtxfer]
    ORA-29400: data cartridge error
    ORA-12801: error signaled in parallel query server P000
    ORA-13249: Error in spatial index: [mdpridxtxfergm]
    ORA-13200: internal error [ROWID:AA
    ORA-39083: Object type INDEX failed to create with error:
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-13249: internal error in Spatial index: [mdidxrbd]
    ORA-13249: Error in Spatial index: index build failed
    ORA-13249: Error in spatial index: [mdrcrtxfergm]
    ORA-13249: Error in spatial index: [mdpridxtxfer]
    ORA-29400: data cartridge error
    ORA-12801: error signaled in parallel query server P002
    ORA-13249: Error in spatial index: [mdpridxtxfergm]
    ORA-13200: internal error [ROWID:AA
    ORA-39083: Object type INDEX failed to create with error:
    ORA-29855: error occurred in the execution of ODCIINDEXCREATE routine
    ORA-13249: internal error in Spatial index: [mdidxrbd]
    ORA-13249: Error in Spatial index: index build failed
    ORA-13249: Error in spatial index: [mdrcrtxfergm]
    ORA-13249: Error in spatial index: [mdpridxtxfer]
    ORA-29400: data cartridge error
    stack cnt....
    How can I find for which indexes it is failing?
    Thank you,
    Myra

  • Getting  error while  importing  data through IMPDB

    Hi All ,
    I am getting  below  error  while  importing.
    Processing object type SCHEMA_EXPORT/TABLE/TABLE
    ORA-39126: Worker unexpected fatal error in KUPW$WORKER.POST_MT_INIT [SELECT SYS.KUPM$MCP.GET_ENDIANNESS@STAG_RISKCORE FROM SYS.DUAL]
    ORA-04052: error occurred when looking up remote object SYS.KUPM$MCP@STAG_RISKCORE
    ORA-00604: error occurred at recursive SQL level 3
    ORA-12154: TNS:could not resolve the connect identifier specified
    ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
    ORA-06512: at "SYS.KUPW$WORKER", line 9715
    ----- PL/SQL Call Stack -----
    object line object
    handle number name
    0xc15928e18 21979 package body SYS.KUPW$WORKER
    0xc15928e18 9742 package body SYS.KUPW$WORKER
    0xc15928e18 2353 package body SYS.KUPW$WORKER
    0xc15928e18 1563 package body SYS.KUPW$WORKER
    0xbef8aa138 2 anonymous block
    Job "SYS"."JOBDASPRD" stopped due to fatal error at Tue Jan 21 16:25:21 2014 elapsed 0 00:05:17
    Thanks,

    It seems you are performing import via network_link  option.
    Ensure that the database link STAG_RISKCORE is valid and works. Also, check the TNS service associated to connect to remote database.

  • Error while importing an index

    Hi,
    We are facing a problem while importing an index to the production region. Below are the details.
    1. A secondary index was created on standard SAP table ILOA in DEV region.
    2. The Index was successfully moved to the Quality system, without any glitches.
    3. Due to some issue (releated to testing, for which we had to revert back the changes), we had to delete the index on ILOA in the DEV region. The transports were moved to the PPD region and hence, the index on ILOA was deleted in PPD also.
    4. Once the issue related to testing was resolved, we again created an index on the table ILOA and moved it to PPD.
    All these 4 mentioned steps happened successfully and in PPD there was no error while importing the transports.
    But, while moving the above transports to the Production region, there was an error :
    "Index ILOA~Y could not be activated
    (E - No index ILOA~Y found with status M)"
    Please note that Y is the name of the index that was created on the table ILOA.
    The error code that we have got is "8".
    Can anyone please shed any light on what the issue is?? WE cannot re-import the transports in to Production without analysing this issue,because our client doesnt permit that.
    Thanks and eagerly awaiting a kind reply.
    Regards,
    Raghavendra.

    Hi,
    As pointed out earlier, everything is fine in the PPD region. However, the issue is while tranporting the change from QA system to the productions system.
    Also, please note that the table is active in both the PPD and PRD system. (in PPD system with index and in PRD system without the index).
    ALso, its not possible to manually adjust the table in SE14 in out production system.
    Please let me know if you have any further ideas on this.
    Thanks a lot
    Raghavendra.

  • Error while importing the user Records through SCC7

    Hi Basis Gurus,
    We are doing the post DB Refresh Activities for a Sandbox .
    Refresh is done from D21 to S21.
    We are stuckup with an error while importing the user Records(scc7).
    The exported user records request from D21 is dumped in the trans directory of S38 and imported in to S21 using TP commands at O/S level. The import is done successfully( RC 4 with warnings).
    But now when we run SCC7 (post import activities) in the background the process is getting cancelled right in the begining.
    Error Occured in SCC3 log
    Table logging disabled in program RSCLXCOP by user SAP*"
    R/3 Version is 4.6C OS:AIX5.3
    Your suggestions will be highly appreciated.
    Regards,
    Sitaram

    Hey Sitaram,
    I looks like you have incorrect parameters of client copy in the S21 system.
    You can change the parameters in S21 system,
    by executing report RSCLXCOP (via transaction SE38 or SA38) in S21.
    Search parameters that related to table logging/sap*
    good luck!

  • Error while importing data in SSAS Tabular Model

    I am new to the concept Tabular Model in SSAS 2014.
    I am trying to create one tabular model based on Adventureworks DW 2014.
    I am getting below error while importing tables to create model.
    "OLE DB or ODBC error: Login failed for user 'ASIAPAC\CSCINDAE732028$'.; 28000.
    A connection could not be made to the data source with the DataSourceID of '98c2d415-1e84-469c-a170-2bcacd779c1a', Name of 'Adventure Works DB from SQL'.
    An error occurred while processing the partition 'Customer_65240c88-55e7-416c-a7ac-732dece8be8e' in table 'Customer_65240c88-55e7-416c-a7ac-732dece8be8e'.
    The current operation was cancelled because another operation in the transaction failed."
    But while creating the Datasource, it has created successfully (below img)
    But while importing the facing the below error.
    Note:
    I have multiple instances in my system with unique names.
    Is this causing any ambiguity issues in selecting right instances?

    Hi Naveen，
    Based on your screenshots, you fail to open a connection to the data source. Right?
    In this scenario, the first screenshot you post is for creating a connection to server with the current windows authentication, not for connecting a data source. So the "Test Connection succeed" means your current windows user can connect
    to server, not connect to the database your selected in the dropdown list. Then you click next, you can choose account to access the data source. Based on the information, your service account "'ASIAPAC\CSCINDAE732028$" doesn't have permission to
    access the database you selected. Please grant the permission for the service account in SSMS.
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou
    If you have any feedback on our support, please click here.

  • Error while importing excel sheet in Import manager

    Hi Experts,
    Please find below error while importing Excels sheet as a source into import manger and advice.
    logon error: failed to open table Text Table for insertion
    Error: Query must have at least one destination filed in sap MDM Import manager
    Regards,
    MFH

    Hi,
    Its clear now.
    Merci
    MFH

  • Error while Importing SYSTEM objects into 9.2.0.6

    HI,
    I got the following error while importing data into 9.2.0.6 DB .
    It is related to a SYSTEM object.
    . importing SYSTEM's objects into SYSTEM
    IMP-00017: following statement failed with ORACLE error 2270:
    "ALTER TABLE "DEF$_CALLDEST" ADD CONSTRAINT "DEF$_CALL_DESTINATION" FOREIGN "
    "KEY ("DBLINK") REFERENCES "DEF$_DESTINATION" ("DBLINK") ENABLE NOVALIDATE"
    IMP-00003: ORACLE error 2270 encountered
    ORA-02270: no matching unique or primary key for this column-list
    Constarint exists on Composite Primary Key on the parent table.
    Can anybody help me out on this.
    Regards,
    Sumit Singh Chadha

    Hi,
    don't mentioning why are You importing SYSTEM objects, the error that You have, just looking the message, is due to an export done without the clause CONSISTENT=Y (so all relations parent/child preserved) having the replication (the table in error is one of the replication dictionary table) active (not quisced)
    Repeat the export operation using CONSISTENT=Y an stop replication activity.
    Hope this helps
    Max

Maybe you are looking for

  • How do you change the "read more ..." in the Blog page to something else?

    I'd like to change the "read more ..." in the Blog page to say something more relevant to my site. How can this be done? I searched the forums and found an earlier response to this question, but I don't quite understand it: Find index.xml.gz file (op

  • How to use exception for a Date Key Figure

    Hello All,                 I have the following requirement. 1. I have a Key Figure which is Date Type. 2. I need to color the cell to green if the it is filled with date otherwise leave it as it is. Please suggest how to overcome it. Thanks & Regard

  • Error accessing device data in netweaver."Unable to read data;can't connect

    Hi Friends, We have implemented MAM in one of our client here in India. Its around 7 months the project been gone live. From last few weeks we are facing problem accessing Device in Netweaver. We prepared a patch to be applied to devices but on searc

  • Gr date and number

    Hi I would like to know from where can i get the GR number and GR date from R/3 to BW. We need to create a report with the following fields PO number, item no, po date, GR date, GR number , ord qty, gr qty, gr val. In purchasing cube we dont get gr d

  • My client is unable to save the filled in pdf whilst I can ? Part2

    I followed instructions as per my earler post and enabled the usage rights see image below. I found the path was (thanks to jersey girl) at under Advanced select"Extend Features in Adboe Reader" in Acrobat 9. The pop upbox below appears, I selected t