Error while importing master repository of old version.

Hi,
I am trying to import Master Repository by using import utility of ODI.
The master repository i am importing is of old version.
How can I import this old version of Master Repository in ODI?
Thanks.

Hey thanks everybody for the reply..
My requirement is :
I have been provided with some folders of Master,Work,Project,Model and Scenario.
One exp file of Repositories is also there.
I was able to import(import utility of ODI tool) folder of 11.1.1.6 but when I try to do the same for 6.0.0 it is giving me the above mentioned error.
I created a Master and Work Repository.
Now how should i proceed further. What to do with the exp file???
How that exp file will create the repository database for me??
I have gone through your site.. but how will i pull the data through that exp file in my database??
It might be a database question, but please do answer as it is co-related to this.
Thanks.

Similar Messages

  • Error while Creating Master Repository: ORA-01031: insufficient Privileges

    Hi,
    I'm trying to install ODI into my VM.
    I have done the installation and while creating Master Repository, I'm getting following error:
    ORA-01031: insufficient Privileges
    I'm using Oracle & have created user as ODI_MASTER with Admin Privileges.
    I'll be using it to load metadata onto planning (Version 11.1.2)
    Is there anything that I'm missing out on.
    Jitendra.

    Seems missing grants on the user you are using to create Master Repository.
    you are using Oracle .. grant connect, resource to <your_user>. These two rolesa have sufficient access to db to create the master repository.
    execuute the sql from sys user
    Regards,
    Amit
    Edited by: amitgupta1202 on 20 Aug, 2009 10:42 PM

  • Error while creating master repository.......

    Hi All,
    While creating master repository........
    Test Connection is successful.
    After that i had selected technology as Oracle
    when i clicked on ok, one error has pop up: java.sql.SQLException: ORA-00907: missing right parenthesis
    What i have to do after this....?
    Regards,
    Dinesh

    Which model are you talking about?
    I'm quiet sure that you have to change the TECH_ORACLE.xml.
    Are you sure that u have modified the file
    oracledi\lib\scripts\xml\TECH_Oracle.xml
    and not the file
    oracledi\impexpTECH_Oracle.xml
    For the certification :
    The Repository can be installed on any relational database engine supporting ANSI ISO 89 syntax, such as Oracle, Microsoft SQL Server, Sybase AS Enterprise, IBM DB2 UDB, IBM DB2/400, etc.
    You can also use for evaluation purposes the demo repository provided with Oracle Data Integrator. This repository is based on an Hypersonic SQL Database. and requires no particular installation.
    I don't have any other information sorry!

  • Error while Importing customer repository schema

    Hi All,
    I want to import a customer repository schema into vendor repository so that i can have multiple main tables.
    I exported the customer repository schema and tried to import it in Vendor repository.
    In the pop up that apperas when we click the Import repository schema and select the file from the source location i selected the below options
    1. for all the modify operations i selected the operation as "Reject "
    2. For all the delete operations i selected the operation as "Reject"
    and
    3. for all the add operations i selected the Operation as "ADD"
    for Vendors table(main) the operation was to delete for which i selected the reject operation and for customers table(main) i selected the add operation.
    Now when select ok the system throws the below error
    "One or more selection Items require that you select additional Items. would you like to see the report".
    On clicking yes to see the report i get the below message
    *Transport operation failed:
    Dependency check failure.  A reference to object of type: MatchingStrategy named: Customers:MDM_CUSTOMERS cannot be resolved because the object is not being added.*
    Can anyone please help me in understanding where i am going wrong?
    regards,
    Sharma.

    Hi Sharma,
    I am quite sure that this problem is related to MDM Strategy only.If you delete your strategy and try u will be able to do so:
    Please check you strategy or check may be in strategy u have some lookup field and corresponding lookup table is not transported.
    See the error says:
    Dependency check failure. A reference to object of type: MatchingStrategy named: Customers:MDM_CUSTOMERS cannot be resolved because the object is not being added
    Regards,
    Neethu Joy

  • Out of memory error while importing work repository.

    any suggestions? The model is created. But project isnt.
    thanks in advance.
    Edited by: user9546555 on Jun 25, 2009 5:35 AM

    Hi,
    I tried 4-5 times . all the time i got out of memory error. Then i changed the odiparam file and increased heap size to 4 times higher.
    Next time i imported it worked just Fine
    thanks anyway.

  • Error while importing Item Master data through DTW

    Hello Expert,
      I trying to import item master data through DTW but it gives an error while importing as shown in attach file..
      Please help me...
      I am using SAP 9.0 Pl 6
    Regards,
    Sandy

    Hi Sandy,
    Kindly follow the check list
    1. Right Click DTW and run it as Administrator.
    2. Is your DTW version is same as SAP B1.
    3. Uninstall and re-install DTW.
    4. If you are using 64-bit DTW, try to use 32-bit one.
    5. Check the Template, is it of the same DTW version.
    6. Remove all the unnecessary columns.
    7. Last try different Template extension.. (e.g: CSV (Comma delimited), or Text (Tab delimited))
    Hope you find this helpful......
    Regards,
    Syed Adnan

  • Error while importing the MS CRM default solution from 2013 to 2015 version.

    Hi All,
    We are getting the following error while importing the default solution form MS CRM 2013 version to 2015.
    Kindly help,
    Regards, Rekha.J

    Hi,
    Thanks for the reply email, I had already gone through this link but not able to find this file CustomizationImport from  SystemDrive:\Program
    Files\Microsoft Dynamics CRM.
    Also a note we are using CRM online version.
    Regards, Rekha.J

  • Error while importing RFC schema

    Hello Friends,
    I am getting the following error while importing the RFC schema in Integration repository from SAP which is on ECC version.
    The error I am getting is:
    Unable to establish connection to R/3 system 10.238.52.79 (system=03, client=250) Troubleshooting tips:
    Is the target system online?
    Check the connection data (note that server names and groups are case-sensitive)
    Tips for administrators (see the configuration guide for more details):
    Does the user have the required authorizations in the target system?
    Is the target system configured correctly in "etc/services"?
    I checked the target system configuraion as well as user authorization. All the connection parameters are also correct.
    Does anybody have idea about the solution to this problem?
    Regards,
    Nitin.

    I had this problem before. I had to make an entry with SAPGW03 in my services file on the XI server. the entry should look like
    sapgw03     3303
    That resolved my problem. If you are working with a XI server on Windowns the file is located in <WINDOWS_DIR>\system32\driver\etc\ directory.
    Thanks,
    Kalyan Musunuri
    OBT Global Inc.
    Message was edited by: Kalyan Tej Musunuri

  • Error while loading master data.

    I am facing error while loading master data in a infoobject.
    The error comes when I run DTP fo rloading data from PSA to infoobject.
    The error wordings are : "MCK_PRDT1 : Data record 1 ('Bleach '): Version 'Bleach ' is not valid"
    Please help me in understanding this Version errror and suggest a solution for this.

    SAP metodology integration MDM & BW you can look at:
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0f1f135-0015-2b10-5e83-acca118e17aa
    You can turn matching strategy in MDM Data manager for delete dublicate of records
    and then use MDM Syndicator for export data to file and then load that file to BW
    If you use OHD you cannot load from BW to MDM repository 10 records and unload only 5 because
    in BW every record has unique key.
    also you can use MDM ABAP or Java API for delete dublicate of records
    Edited by: Kanstantsin Chernichenka on May 8, 2009 1:02 PM

  • Error while importing zip file for second time to B2B through ant script

    [echo] args=import
    importstatus:
    [echo] Commandline arguments 1: [import]
    [echo] Import with overwrite=true
    [echo] B2BCommandLineUtility: importRepository: Error messages:
    [echo] MDS-00521: error while reading document /soa/b2b/tpa_JOvrtiV-7030143
    019445112136.xml from metadata repository
    [echo] MDS-00520: failure to read document /soa/b2b/tpa_JOvrtiV-70301430194
    45112136.xml because it is not in the metadata repository
    [echo] MDS-00911: Document with name "/soa/b2b/tpa_JOvrtiV-7030143019445112
    136.xml" and version 16 does not exist in the repository.
    [echo] ORA-01403: no data found
    [echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
    [echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
    [echo] ORA-06512: at line 1
    [echo]
    [echo] ORA-01403: no data found
    [echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
    [echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
    [echo] ORA-06512: at line 1
    [echo]
    [echo] ORA-01403: no data found
    [echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407
    [echo] ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603
    [echo] ORA-06512: at line 1
    [echo]
    [echo]
    Can anybody plz help???
    Thanks in Advance!!!

    Hi,
    Even I am getting the same error while importing the .zip file for the second time through B2B console-->Administration-->Import/export tab.
    But again it works for the third time..
    Error Message:
    Import of file OriginalProject.zip failed. MDS-00521: error while reading document /soa/b2b/tpa_MnjhBHh-70301432125893445241.xml from metadata repository MDS-00520: failure to read document /soa/b2b/tpa_MnjhBHh-70301432125893445241.xml because it is not in the metadata repository MDS-00911: Document with name "/soa/b2b/tpa_MnjhBHh-70301432125893445241.xml" and version 34 does not exist in the repository. ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1 ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1 ORA-01403: no data found ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 407 ORA-06512: at "DEV_MDS.MDS_INTERNAL_SHREDDED", line 603 ORA-06512: at line 1
    Please help...

  • Error while loading master data attribute

    Hi Guru's
    I am getting below mention error while loading master  data attribute.
    0MANU_MATNR : Data record 1035 ('000000000000229058 '): Version 'BDM755s ' is not valid
    Please sugggest how to resolve ?
    Regards
    Karan

    Hi,
    I think there is problem with "0MANU_MATNR" Data, check the records 1033 to 1036 and find the differnce between 1035 record and other records, some values is giving problem so by looking at other reocrds i.e 1033,1034,1036. Check in PSA in Monitor. 
    Note: If any problem with Upper/Lowe case then use TOUPPER in Transfer Rules
    If need use Conversion exits in transfer rules.
    ALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
      EXPORTING
        INPUT         = 0MANU_MATNR
    IMPORTING
       OUTPUT        =   Result .
    or
    ALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
      EXPORTING
        INPUT         = 0MANU_MATNR
    IMPORTING
       OUTPUT        =   Result .
    Thanks
    Reddy
    Edited by: Surendra Reddy on Mar 3, 2009 11:46 AM

  • Error while importing music in iMovie 09 from iTunes 10

    I have the same error explained in a other post which was still left unanswered
    I have this sound problem after reorganising folders by itunes, i tried to delete al files in itunes and also
    deleted the xml file in the itunes dir, created new playlists, but still i have no music sound in imovie timeline
    after dragging a mp3 into it. When i preview the file in imovie it souds ok.
    Also i see the red dot with the number 1 in the itunes logo while dragging the mp3.
    Is there a solution for this problem?
    Former post;
    Re: Error while importing music in iMovie 09 from iTunes 09
    Posted: Jul 24, 2010 8:08 AM   in response to: vincentplaces  
    I'm having the exact same issue, but still haven't figured out what it is. I note that at the top of this thread it indicates that there are two "helpful" entries and one "solved" entry, but I can't find the solved one, so maybe someone will repost it here or kindly link to it.
    There is one icon missing though.
    As I read through the excellent tutorial at http://www.kenstone.net/fcphomepage/imovie_09stone.html I scroll down to the point where he talks about dragging music in from iTunes, which is what I'm trying to do. I can see, in his screen shot, the extra little icon that is a red oval and a white "1" in it. I don't get that icon when I am trying to drag my music into the video. I do get the green and white plus icon when I try to drag my music in. Also I DO get BOTH the red 1 and the green plus when I try dragging in a sound effect, which I can do with no problem. But why not the music?
    I've been able to drag in music with no problem in other productions, so I can't figure out what is going on with this one. I'm sure there is a setting somewhere that got flipped, but I can't figure out where.
    In desperation I also tried adding an extra title slide at the end of my video just to make sure there is more video time than music time in the production, but that didn't help at all.
    Any help guys?
    iMac 27"   Mac OS X (10.6.4)    

    Made a mistake in the title, version of imovie is 11

  • Error,while importing METADATA  from production to development

    Folks,
    I am getting the following error while importing the metadata. I have exported from production server and want to do some modification to the existing mappings. Can some body help me to resolve this?
    Here is the error.
    Import started at 10/07/2004 11:12:19 AM
    * Import for OWB Release: 9.0.2.56.0 Version: 9.0.2.0.0
    * User: owb_rep Connect String: (DESCRIPTION=(ADDRESS=(HOST=vectrenabp)(PROTOCOL=tcp)(PORT=1521))(CONNECT_DATA=(SID=SDWSTEST)))
    * Data File: C:\oracle\OWBHome\owb\bin\win32\SDWSDEV-MAPPINGS-20041007_0916.mdl
    * Log File: c:\oracle\OWBHome\owb\bin\win32\Log.log Log Message Level: ALL
    * Physical Names: Y Mode: CREATE Character Set: WE8MSWIN1252
    * Ignore Universal Identifier: N Commit At End: Y
    Informational at line 15: MDL1205: PROJECT with Unique Object ID (UOID) <85247BBFEA1B44C6B10CDB3B70155A63> already exists, so PROJECT with physical name <SDWSDEV> and logical name <SDWSDEV> not imported.
    Informational at line 24: MDL1205: DATAWAREHOUSE with Unique Object ID (UOID) <268F5A9F43364309A8C0D01374C4A867> already exists, so DATAWAREHOUSE with physical name <DWH_TARGET> and logical name <DWH_TARGET> not imported.
    Error at line 141: MDL1247: Error occurred importing mapping <DWH_ZIP_CODE_DMGRPHCS_DIM_MAP/DWH_ZIP_CODE_DMGRPHCS_DIM_MAP> (at line 141).
    Detailed Error Message:
    API2014: Internal Error: Error in createStage:

    I have selected the option
    Add new metadata and replace existing objetcs. But it is not importing. Also I tried other options like
    1. deleting the existing mapping and tried.
    2. Putting the mapping in recycle bin and try.
    3. Take it from recycle bin.Even during taking it from recycle it is giving me the following error .
    Error occurred importing mapping
    <DWH_CMMDTY_INVC_FACT_MAP/DWH_CMMDTY_INVC_FACT_MAP>
    (at line 141).
    Detailed Error Message:
    API2014: Internal Error: Error in createStage:
    In above all cases it is giving me the error.
    Could you please help?

  • Error while importing 10.2.0.3 dumpfile on 11.2.0.1Database

    Hi All,
    I am getting the below error while importing an 10g dump on an 11g Database.
    The command which i am executing is
    C:\Users>impdp directory=TEST_DIR parallel=4 dumpfile=TEST_%U.dmp logfile=TEST.log schemas=TEST
    The Error is :
    ORA-39002: invalid operation
    ORA-31694: master table "SYS"."SYS_IMPORT_SCHEMA_01" failed to load/unload
    ORA-02354: error in exporting/importing data
    ORA-02368: the following file is not valid for this load operation
    ORA-02369: internal number in header in file H:\TEST\TEST_03.dmp is not valid
    Which means TEST_03.dmp is not valid but when i am executing the same Import by using the below command
    C:\Users>impdp directory=TEST_DIR parallel=4 dumpfile=TEST_01.dmp,TEST_02.dmp,TEST_03.dmp,TEST_04.dmp logfile=TEST.log schemas=TEST
    Is Throwing an error as
    ORA-39001: invalid argument value
    ORA-39000: bad dump file specification
    ORA-31619: invalid dump file "H:\TEST\TEST_04.dmp"
    So i am confused that in previous command it was stating TEST_03.dmp is not valid and in above command it throwing error as TEST_04.dmp is valid.
    Can anyone help me why there is such discrepencies in it while i am running the same commands.
    Thanks
    Snehasis.

    Hi,
    I would think that all the files are 'bad' in some way but the command is just accessing the files in a different order when run in the two different ways. All the files have to be read at the initial phase of the import.
    I think you'll likely find that if you change the order of the files in your second command the bad file will be reported as a different file - oracle often validates things from right to left.
    The % option is probably ordering the files in some random sequence and it just so happened that TEST03.dmp was checked first.
    The most likely cause of the error is that the files were transferred to the server in the correct ftp mode.
    Cheers,
    Harry

  • Error while importing WSDL file created in JDeveloper inside BS

    Hi All,
    I am facing error while importing WSDL of the DBAdapter service created using JDeveloper inside my business service in OSB.
    The error in OSB is 'The Resource Mapped Does not exist'

    Which version of OSB are you using? You need to upload schema (.xsd) files as well. WSDL has references to that schema(s) but they are not uploaded hence this error. On sbconsole, if you click on a WSDL name to see it, a button comes with name "Edit References". Click that to point to the xsd's you uploaded.
    Regards,
    Anuj

Maybe you are looking for