Error while importing Still image.

I searched the data base and found a similar question but it wasn't answered.
I'm running PE 10 on a Mac (O S 10.6.8) with 4GB of RAM and lots of disk space.
First attempt importing a stitched photo (panorama) from LR3 as a .TIF; got this error message - Error: The importer reported a generic error.
Went back to LR and converted to .JPG
Second attempt importing same photo as .JPG format; got this error message - Error: File video dimensions (width/height) too large.
Does anyone know what the limitations are for importing photos into PE 10?  I've never had this issue with iMovie.
Thank you.

If you want PRE to be responsive you should follow Steves' recommendation to resize to 1000x750 (SD).
At the technical level I think the maximum allowable dimensions are 4096 x 4096 - but PRE will struggle with pictures that size.
Cheers,
Neale
Insanity is hereditary, you get it from your children

Similar Messages

  • Error while Importing .bmp Images

    Hello All,
    I'm getting an error when attempting to import a bitmap (*.bmp) image file into Flash Professional CS6. I tried both "Import to Library" and "Import to Stage" and they both throw the same error...
    This is the Error I get when attempting the import:
    "One or more files were not imported because there were problems reading them."
    After searching around online I found a few examples of people getting similar problems when importing stuff but none of those were for impoting .bmp images.
    Any idea why I can't do this?
    Any thoughts or suggestions would be greatly appreciated!
    EDIT:
    I just tried downloaing a .bmp from the internet and was able to successfully import that, but still can't import the one I actuallty want. The bitmap that I want to import is one that I created using Gimp 2.8 and had to "export" it to .bmp format from Gimp's xcf file format...
    Thanks in Advance,
    Matt

    Hey sinious, thanks for the reply!
    Ok I'll just use the PNG format then... I was only trying BMP because I read that it had the bast image quality. I've been using PNG format for ALL my Frame's Backgrounds, but some of the Text that was part of the PNG Image (*i.e. part of the background image) looked choppy after importing it into my Library and setting it as the Frame's background. But it looks fine when viewing the image with any other "Image Viewer" type program.
    Might be that it just looks a little choppy when "testing" the movie, by hitting Ctrl+Enter...
    EDIT:
    Ok, so I just Published it and viewed it on another PC (*I have it setup to be able to be viewed from anywhere in the network using the flashpolicy file stuff) and it seems to look better after its Published... Maybe the quailty isn't as good when debugging/testing the movie...?
    Thanks Again for your reply, much appreciated!
    Thanks,
    Matt

  • Error while importing music in iMovie 11 From itunes 10

    Error while importing music in iMovie 11
    I have the same error explained in a other post which was still left unanswered
    I have this sound problem after reorganising folders by itunes, i tried to delete al files in itunes and also
    deleted the xml file in the itunes dir, created new playlists, but still i have no music sound in imovie timeline
    after dragging a mp3 into it. When i preview the file in imovie it souds ok.
    Also i see the red dot with the number 1 in the itunes logo while dragging the mp3.
    Is there a solution for this problem?
    Former post;
    Re: Error while importing music in iMovie 09 from iTunes 09
    Posted: Jul 24, 2010 8:08 AM   in response to: vincentplaces  
    I'm having the exact same issue, but still haven't figured out what it is. I note that at the top of this thread it indicates that there are two "helpful" entries and one "solved" entry, but I can't find the solved one, so maybe someone will repost it here or kindly link to it.
    There is one icon missing though.
    As I read through the excellent tutorial at http://www.kenstone.net/fcphomepage/imovie_09stone.html I scroll down to the point where he talks about dragging music in from iTunes, which is what I'm trying to do. I can see, in his screen shot, the extra little icon that is a red oval and a white "1" in it. I don't get that icon when I am trying to drag my music into the video. I do get the green and white plus icon when I try to drag my music in. Also I DO get BOTH the red 1 and the green plus when I try dragging in a sound effect, which I can do with no problem. But why not the music?
    I've been able to drag in music with no problem in other productions, so I can't figure out what is going on with this one. I'm sure there is a setting somewhere that got flipped, but I can't figure out where.
    In desperation I also tried adding an extra title slide at the end of my video just to make sure there is more video time than music time in the production, but that didn't help at all.
    Any help guys?
    iMac 27"   Mac OS X (10.6.4)    

    Hi
    Due to some kind of copy protection in iTunes - I don't copy directly from this in iMovie
    to my projects. (Most often the result of doing it in iMovie is a DVD without any sound)
    I do
    • In iTunes - collect needed audio into a new Playlist
    • then burn this out as an Audio-CD .aiff (NOT .mp3)
    • This CD I copy into a folder on my Mac (often containing other material that's connected to the project)
    • And then I drag and drop these .aiff files into my movie project in iMovie.
    This works Greatly and even more so when I do my DVD.
    Yours Bengt W

  • Error While loading a image from database

    Purpose
    Error While loading the Image from the database
    ORA-06502: PL/SQL : numeric or value error:Character string buffer too small
    ORA-06512: at "Sys.HTP" ,line 1480
    Requirement:
    I am developing the web pages using PSP(Pl/sql Serverpages) . I have a requirement to show a image in the webpage. I got the following procedures from the oracle website.
    I have created the following table to store the images
    create table DEMO
    ID INTEGER not null,
    THEBLOB BLOB
    And I also uploaded the Images. Now I am try to get a image from the table using the following procedure .But I am getting the error message line 25( htp.prn( utl_raw.cast_to_varchar2( l_raw ) );) .at it throws the following error messages
    ORA-06502: PL/SQL : numeric or value error:Character string buffer too small
    ORA-06512: at "Sys.HTP" ,line 1480
    Procedure that I used to get the image
    create or replace package body image_get
    as
    procedure gif( p_id in demo.id%type )
    is
    l_lob blob;
    l_amt number default 30;
    l_off number default 1;
    l_raw raw(4096);
    begin
    select theBlob into l_lob
    from demo
    where id = p_id;
    -- make sure to change this for your type!
    owa_util.mime_header( 'image/gif' );
    begin
    loop
    dbms_lob.read( l_lob, l_amt, l_off, l_raw );
    -- it is vital to use htp.PRN to avoid
    -- spurious line feeds getting added to your
    -- document
    htp.prn( utl_raw.cast_to_varchar2( l_raw ) );
    l_off := l_off+l_amt;
    l_amt := 4096;
    end loop;
    exception
    when no_data_found then
    NULL;
    end;
    end;
    end;
    What I have to do to correct this problem. This demo procedure and table that I am downloaded from oracle. Some where I made a mistake. any help??
    Thanks,
    Nats

    Hi Satish,
    I have set the raw value as 3600 but still its gives the same error only. When I debug the procedure its throwing the error stack in
    SYS.htp.prn procedure of the following line of code
    if (rows_in < pack_after) then
    while ((len - loc) >= HTBUF_LEN)
    loop
    rows_in := rows_in + 1;
    htbuf(rows_in) := substr(cbuf, loc + 1, HTBUF_LEN);
    loc := loc + HTBUF_LEN;
    end loop;
    if (loc < len)
    then
    rows_in := rows_in + 1;
    htbuf(rows_in) := substr(cbuf, loc + 1);
    end if;
    return;
    end if;
    Its a system procedure. I don't no how to proceed .. I am really stucked on this....is their any other method to take picture from the database and displayed in the web page.....???? any idea..../suggesstion??
    Thanks for your help!!!.

  • Error while importing a dump file in my local database

    Hi,
    I have a dump file named *"system_21Sep2010_DVSD.DMP"* which i'm trying to import in my local database named *"nandita1"*.
    The dump file is found under the following path *"C:\DevSuiteHome_1\BIN"* and i executed the following command for importing the dump file:
    C:\DevSuiteHome_1\BIN>imp system/system@nandita1 FILE=system_21Sep2010_DVSD.DMP FULL=YES
    I'm getting the following error while importing the dump file:
    Import: Release 10.1.0.4.2 - Production on Wed Oct 6 16:25:37 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
    tion
    With the Partitioning, OLAP and Data Mining options
    Export file created by EXPORT:V10.01.00 via conventional path
    import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    IMP-00015: following statement failed because the object already exists:
    "CREATE UNDO TABLESPACE "UNDOTBS1" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DV"
    "SD/undotbs01.dbf' SIZE 104857600 AUTOEXTEND ON NEXT 5242880 MAXSIZE "
    "32767M EXTENT MANAGEMENT LOCAL "
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "SYSAUX" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/sysa"
    "ux01.dbf' SIZE 367001600 AUTOEXTEND ON NEXT 10485760 MAXSIZE 32767M "
    "EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANA"
    "GEMENT AUTO"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TEMPORARY TABLESPACE "TEMP" BLOCKSIZE 8192 TEMPFILE '/oradata_dev/D"
    "VSD/temp01.dbf' SIZE 20971520 AUTOEXTEND ON NEXT 655360 MAXSIZE 3276"
    "7M EXTENT MANAGEMENT LOCAL UNIFORM SIZE 1048576"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "USERS" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/users"
    "01.dbf' SIZE 5242880 AUTOEXTEND ON NEXT 1310720 MAXSIZE 32767M EXTEN"
    "T MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANAGEMEN"
    "T AUTO"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "XX_DATA" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/XX_"
    "DATA01.dbf' SIZE 140509184 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M"
    " EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT "
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "XX_INDEX" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/XX"
    "_INDEX.dbf' SIZE 93323264 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M "
    "EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT "
    IMP-00015: following statement failed because the object already exists:
    "CREATE PROFILE "MONITORING_PROFILE" LIMIT COMPOSITE_LIMIT DEFAULT SESSIONS_"
    "PER_USER DEFAULT CPU_PER_SESSION DEFAULT CPU_PER_CALL DEFAULT LOGICAL_READS"
    "_PER_SESSION DEFAULT LOGICAL_READS_PER_CALL DEFAULT IDLE_TIME DEFAULT CONNE"
    "CT_TIME DEFAULT PRIVATE_SGA DEFAULT FAILED_LOGIN_ATTEMPTS UNLIMITED PASSWOR"
    "D_LIFE_TIME DEFAULT PASSWORD_REUSE_TIME DEFAULT PASSWORD_REUSE_MAX DEFAULT "
    "PASSWORD_LOCK_TIME DEFAULT PASSWORD_GRACE_TIME DEFAULT"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "OUTLN" IDENTIFIED BY VALUES '4A3BA55E08595C81' TEMPORARY TABLE"
    "SPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "TSMSYS" IDENTIFIED BY VALUES '3DF26A8B17D0F29F' DEFAULT TABLES"
    "PACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "ANONYMOUS" IDENTIFIED BY VALUES 'anonymous' DEFAULT TABLESPACE"
    " "SYSAUX" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "OLAPSYS" IDENTIFIED BY VALUES '3FB8EF9DB538647C' DEFAULT TABLE"
    "SPACE "SYSAUX" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "MDDATA" IDENTIFIED BY VALUES 'DF02A496267DEE66' DEFAULT TABLES"
    "PACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "SYSMAN" IDENTIFIED BY VALUES '28F72A3C2D75FDE9' DEFAULT TABLES"
    "PACE "SYSAUX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "MGMT_VIEW" IDENTIFIED BY VALUES '442167C25FAC883C' TEMPORARY T"
    "ABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "SCOTT" IDENTIFIED BY VALUES 'F894844C34402B67' DEFAULT TABLESP"
    "ACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "BUXXDDWA" IDENTIFIED BY VALUES '2672292A792DB64B' DEFAULT TABL"
    "ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXDDWA" IDENTIFIED BY VALUES 'F5C178B2796496F4' DEFAULT TABLES"
    "PACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "BUXXDDWS" IDENTIFIED BY VALUES '06D47E0665132890' DEFAULT TABL"
    "ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "BUXXSUC" IDENTIFIED BY VALUES '1705C688518ADCDC' DEFAULT TABLE"
    "SPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "JIRAUSER" IDENTIFIED BY VALUES 'F0E1C662FCD1E09F' DEFAULT TABL"
    "ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXSFA" IDENTIFIED BY VALUES 'C3DFA37A29E072B6' DEFAULT TABLESP"
    "ACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXDDW" IDENTIFIED BY VALUES 'CFF3D9B1B6C20DCC' DEFAULT TABLESP"
    "ACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXDDWS" IDENTIFIED BY VALUES '9EF0EE1BAC5855C4' DEFAULT TABLES"
    "PACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXSUC" IDENTIFIED BY VALUES '39594B53A6F1CED0' DEFAULT TABLESP"
    "ACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "SELECT_CATALOG_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "SELECT_CATALOG_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "EXECUTE_CATALOG_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "EXECUTE_CATALOG_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "DELETE_CATALOG_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "DELETE_CATALOG_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "RECOVERY_CATALOG_OWNER""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "RECOVERY_CATALOG_OWNER" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "GATHER_SYSTEM_STATISTICS""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "GATHER_SYSTEM_STATISTICS" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "LOGSTDBY_ADMINISTRATOR""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "LOGSTDBY_ADMINISTRATOR" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "AQ_ADMINISTRATOR_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "AQ_USER_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "AQ_USER_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "GLOBAL_AQ_USER_ROLE" IDENTIFIED GLOBALLY "
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "SCHEDULER_ADMIN""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "SCHEDULER_ADMIN" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "HS_ADMIN_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "HS_ADMIN_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "AUTHENTICATEDUSER""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "AUTHENTICATEDUSER" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OEM_ADVISOR""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OEM_ADVISOR" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OEM_MONITOR""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OEM_MONITOR" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "WM_ADMIN_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "WM_ADMIN_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVAUSERPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVAUSERPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVAIDPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVAIDPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVASYSPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVASYSPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVADEBUGPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVADEBUGPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "EJBCLIENT""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "EJBCLIENT" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVA_ADMIN""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVA_ADMIN" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVA_DEPLOY""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVA_DEPLOY" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "CTXAPP""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "CTXAPP" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "XDBADMIN""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "XDBADMIN" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "XDBWEBSERVICES""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "XDBWEBSERVICES" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OLAP_DBA""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OLAP_DBA" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OLAP_USER""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OLAP_USER" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "MGMT_USER""
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "MVIEW$_ADVSEQ_GENERIC" MINVALUE 1 MAXVALUE 4294967295 INCR"
    "EMENT BY 1 START WITH 1 CACHE 50 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "MVIEW$_ADVSEQ_ID" MINVALUE 1 MAXVALUE 4294967295 INCREMENT"
    " BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "LOGMNR_EVOLVE_SEQ$" MINVALUE 1 MAXVALUE 999999999999999999"
    "999999999 INCREMENT BY 1 START WITH 1 CACHE 20 ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "LOGMNR_SEQ$" MINVALUE 1 MAXVALUE 9999999999999999999999999"
    "99 INCREMENT BY 1 START WITH 1 CACHE 20 ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "LOGMNR_UIDS$" MINVALUE 1 MAXVALUE 999999999999999999999999"
    "999 INCREMENT BY 1 START WITH 100 CACHE 20 ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_FLAVORS_S" MINVALUE -2147483647 MAXVALUE 214748364"
    "7 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_FLAVOR_NAME_S" MINVALUE 1 MAXVALUE 999999999999999"
    "999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_REPPROP_KEY" MINVALUE 1 MAXVALUE 99999999999999999"
    "9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT_LOG_SEQUENCE" MINVALUE 1 MAXVALUE 99999999999999999"
    "9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_REFRESH_TEMPLATES_S" MINVALUE 1 MAXVALUE 999999999"
    "999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_USER_AUTHORIZATIONS_S" MINVALUE 1 MAXVALUE 9999999"
    "99999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_REFGROUPS_S" MINVALUE 1 MAXVALUE 99999999"
    "9999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_OBJECTS_S" MINVALUE 1 MAXVALUE 9999999999"
    "99999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_PARMS_S" MINVALUE 1 MAXVALUE 999999999999"
    "999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_USER_PARM_VALUES_S" MINVALUE 1 MAXVALUE 9999999999"
    "99999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_SITES_S" MINVALUE 1 MAXVALUE 999999999999"
    "999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMP_OUTPUT_S" MINVALUE 1 MAXVALUE 999999999999999"
    "999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_RUNTIME_PARMS_S" MINVALUE 1 MAXVALUE 9999999999999"
    "99999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "TEMPLATE$_TARGETS_S" MINVALUE 1 MAXVALUE 99999999999999999"
    "9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_EXCEPTIONS_S" MINVALUE 1 MAXVALUE 9999999999999999"
    "99999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    . importing OLAPSYS's objects into OLAPSYS
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "OLAP_ID_SEQ" MINVALUE 1 MAXVALUE 9999999999999999999999999"
    "99 INCREMENT BY 1 START WITH 122 NOCACHE NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "OLAP_IRID" MINVALUE 1 MAXVALUE 999999999999999999999999999"
    " INCREMENT BY 1 START WITH 24 NOCACHE ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "CWM2_OLAP_ENABLESEQ" MINVALUE 1 MAXVALUE 9999 INCREMENT BY"
    " 1 START WITH 1 NOCACHE ORDER CYCLE"
    I've been waiting for hours, but still it is blocked at the same place, that is:
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "CWM2_OLAP_ENABLESEQ" MINVALUE 1 MAXVALUE 9999 INCREMENT BY"
    " 1 START WITH 1 NOCACHE ORDER CYCLE"
    I've tried recreating the database, but still the error is the same.
    I've tried including the ignore=Y, that is:
    C:\DevSuiteHome_1\BIN>imp system/system@nandita1 FILE=system_21Sep2010_DVSD.DMP
    FULL=YES IGNORE=YES
    The error generated is as displayed below:
    Import: Release 10.1.0.4.2 - Production on Wed Oct 6 16:34:04 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
    tion
    With the Partitioning, OLAP and Data Mining options
    Export file created by EXPORT:V10.01.00 via conventional path
    import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    . importing OLAPSYS's objects into OLAPSYS
    Over here also, i had to kill the process since it was blocked at the following statement: ". importing OLAPSYS's objects into OLAPSYS"
    Please can someone help me out.
    Thanking in advanced

    plzzzzzzzzzzzzzzzzz.............sme1 help me out

  • Connection Failed Error while Importing tables in 11.1.1.6 on Windows 7

    Hi,
    Can you please help me in resolving the connection failed error while importing the tables from the database.
    I am using OBI 11.1.1.6 on Windows 7
    You help is highly appreciated. I have followed all the below blogs but still i was not able to resolve the issue.
    http://123obi.com/2011/03/error-the-connection-has-failed-in-obiee-11g/
    http://obieedeveloper.blogspot.in/2012/03/connection-failed-error-in-obiee-11-g.html
    http://iadviseblog.wordpress.com/2011/05/29/obiee-11g-error-in-importing-metadata/
    http://www.obieefans.com/%E2%80%9Cthe-connection-has-failed%E2%80%9D-error-in-obiee-11g-admin-tool/
    Thanks in Advance
    Siva

    It would be nice if you put your issues instead of asking to look those many urls.
    try using tns entry in connection pool or follow this thread
    Connection failed in OBIEE 11g

  • Error while importing music in iMovie 09 from iTunes 10

    I have the same error explained in a other post which was still left unanswered
    I have this sound problem after reorganising folders by itunes, i tried to delete al files in itunes and also
    deleted the xml file in the itunes dir, created new playlists, but still i have no music sound in imovie timeline
    after dragging a mp3 into it. When i preview the file in imovie it souds ok.
    Also i see the red dot with the number 1 in the itunes logo while dragging the mp3.
    Is there a solution for this problem?
    Former post;
    Re: Error while importing music in iMovie 09 from iTunes 09
    Posted: Jul 24, 2010 8:08 AM   in response to: vincentplaces  
    I'm having the exact same issue, but still haven't figured out what it is. I note that at the top of this thread it indicates that there are two "helpful" entries and one "solved" entry, but I can't find the solved one, so maybe someone will repost it here or kindly link to it.
    There is one icon missing though.
    As I read through the excellent tutorial at http://www.kenstone.net/fcphomepage/imovie_09stone.html I scroll down to the point where he talks about dragging music in from iTunes, which is what I'm trying to do. I can see, in his screen shot, the extra little icon that is a red oval and a white "1" in it. I don't get that icon when I am trying to drag my music into the video. I do get the green and white plus icon when I try to drag my music in. Also I DO get BOTH the red 1 and the green plus when I try dragging in a sound effect, which I can do with no problem. But why not the music?
    I've been able to drag in music with no problem in other productions, so I can't figure out what is going on with this one. I'm sure there is a setting somewhere that got flipped, but I can't figure out where.
    In desperation I also tried adding an extra title slide at the end of my video just to make sure there is more video time than music time in the production, but that didn't help at all.
    Any help guys?
    iMac 27"   Mac OS X (10.6.4)    

    Made a mistake in the title, version of imovie is 11

  • Error while importing EJB model in Web dynpro: Unable to fetch the EJBs.

    Hi,
    We are getting the below error while importing ejb model to Web dynpro.
    Error :
    Unable to fetch the EJBs. Check if the selected Enterprise Application contain the EJBs.
    I have created the public part-> It has a reference to EJB client and the enterprise application also has reference to the EJB project.The EJB is also added in dependency list.
    But still we are getting this error. Could anyone please explain what can i do to solve this issue.
    Best Regards,
    Karthika

    Hi Vishweshwara,
    Thanks for your reply.
    Please find the steps i followed while importing EJB model in webdynpro.
    1. The Entity forwarding permission has been enabled.
    2. public part reference has been created and through the reference entity option the ejbDC->Client public part is selected.
    I followed all the steps mentioned in the document. But still i am getting that error. In EJB DC we have list of JPA entities and stateless session beans are exposed as a webservice(top-down manner).The enterprise application has a reference to the EJB DC.
    I could be able to invoke the ejb service beans from ejb explorer and Webservice navigator.
    I am able to insert,delete and modify the records from there.
    Please let me know what could i do to resolve this error?
    Best Regards,
    Karthika
    Edited by: SAKarthika on Apr 29, 2011 1:43 PM

  • "Failed to perform requested action" error while importing table in P.Layer

    HI
    I have encountered an error while importing the table into physical layer of the repository. When I select the table and click the 'move the selected' button it is throwing this error "Failed to perform requested action". I didn't understand what does it mean, even it is not giving any error code but when I try to import other tables it is working fine. Please help me to solve this if someone has any idea. Thanks.

    Hi Srinivas,
    I think you want to do JDBC lookup.. you must have created the JDBC receiver communication channel. As your communication channel is correct and still you are getting Table not found error.. Check following steps.
    - Check that your Communication channel is activated and working fine.
    - Check that the ID which you are using in JDBC receiver is having proper authorization to import the table definition.
      Just check with all authorization.
    I think the problem is with insufficient authorization to User ID used on JDBC communication channel.
    Thanks,
    Bhupesh.

  • Error while importing swf file in to Crystal Xcelsius Designer 4.5

    help me...., Error while importing swf file in to Crystal Xcelsius Designer 4.5

    I read in the book called "CRYSTAL XCELSIUS for DUMMIES" on page 243 under topic called Nesting a Dashboard within another Dashboard.
    sorry i used the wrong word embed, here i am importing the swf using image component.
    My requirement is somethis like this parent child dependency menu.
    eg: i have to two tabs 1)alphabets 2) Numerics  First levet menu
    if you click alphabets tab then the following menu A/B/C/D/..... Z i have diff charts.. under each alphabet.
    If you click numberic tab then the follwing menu should one/two/three/.......ten  here also i have diff charts under number
    in over to avoid complexity in dynamic visibility i divided the into 3 dashboards.  1- alphabets 2- number and 3 -importing both swfs.. everything works fine except first tab and last tab under alphabets and numerics.
    If some one help me with some alernative ... would be great.
    Thanks

  • Errors while importing support

    hello all,
    I am getting following errors while importing support
    packages Queue SPAMu2026
    - Error in phase: CHECK_REQUIREMENTS
    - Reason for error: TP_CANNOT_CONNECT_SYSTEM
    - Return code: 0232
    - Error message: connect failed
    I have checked the TPPRAM file, RFC connection and
    it's normalu2026
    I even changed the directory to /usr/sap/trans/bin and
    executed command "tp connect <SID>" and same erroru2026
    Return code: 0232
    Also I tested the connectivity from STMS
    RFC Link tp was started successfully
    tp Version 340.15.02
    DB Connect Link to database failed
    Offline Call connect failed
    any ideas? any suggestions? I really need help.
    Jack Lee

    Dear All:
    the error still the same~
    I excuted the R3trans -d and came out like below:
    C:\Documents and Settings\dbsadm>R3trans -d
    This is R3trans version 6.13 (release 640 - 24.04.09 - 13:43:00).
    2EETW169 no connect possible: "DBMS = MSSQL                            ---  SERV
    ER = 'PRDTEST' DBNAME = 'DBS'"
    R3trans finished (0012).
    and here is the trans.log:
    4 ETW000 R3trans version 6.13 (release 640 - 24.04.09 - 13:43:00).
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 02.07.2005 - 15:36:52
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Sat Jul 02 15:36:55 2005                            6991  0.006991
    4 ETW000  [dev trc     ,00000]  db_con_init called                                    65  0.007056
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                            183  0.007239
    4 ETW000  [dev trc     ,00000]  Loading DB library 'dbmssslib.dll' ...                51  0.007290
    4 ETW000  [dev trc     ,00000]  load shared library (dbmssslib.dll), hdl 0          1550  0.008840
    4 ETW000  [dev trc     ,00000]      using "C:\usr\sap\DBS\SYS\exe\run\dbmssslib.dll"
    4 ETW000                                                                              14  0.008854
    4 ETW000  [dev trc     ,00000]  Library 'dbmssslib.dll' loaded                         7  0.008861
    4 ETW000  [dev trc     ,00000]  function DbSlExpFuns loaded from library dbmssslib.dll
    4 ETW000                                                                              11  0.008872
    4 ETW000  [dev trc     ,00000]  Version of 'dbmssslib.dll' is "640.00", patchlevel (0.266)
    4 ETW000                                                                             492  0.009364
    4 ETW000  [dev trc     ,00000]  function dsql_db_init loaded from library dbmssslib.dll
    4 ETW000                                                                               9  0.009373
    4 ETW000  [dev trc     ,00000]  function dbdd_exp_funs loaded from library dbmssslib.dll
    4 ETW000                                                                              19  0.009392
    4 ETW000  [dev trc     ,00000]  New connection 0 created                              75  0.009467
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              40  0.009507
    4 ETW000  [dev trc     ,00000]  db_con_connect (con_name=R/3)                         36  0.009543
    4 ETW000  [dev trc     ,00000]  find_con_by_name found the following connection for reuse:
    4 ETW000                                                                              10  0.009553
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              14  0.009567
    4 ETW000  [dev trc     ,00000]  Thread ID:2320                                      3431  0.012998
    4 ETW000  [dev trc     ,00000]  Thank You for using the SLOLEDB-interface             51  0.013049
    4 ETW000  [dev trc     ,00000]  Using dynamic link library 'C:\usr\sap\DBS\SYS\exe\run\dbmssslib.dll'
    4 ETW000                                                                              37  0.013086
    4 ETW000  [dev trc     ,00000]  dbmssslib.dll patch info                             117  0.013203
    4 ETW000  [dev trc     ,00000]    patchlevel   0                                     112  0.013315
    4 ETW000  [dev trc     ,00000]    patchno      266                                     8  0.013323
    4 ETW000  [dev trc     ,00000]    patchcomment Batch jobs stay in Ready status (1291921)
    4 ETW000                                                                              10  0.013333
    4 ETW000  [dev trc     ,00000]  np:(local) connection used on PRDTEST                 84  0.013417
    4 ETW000  [dev trc     ,00000]  CopyLocalParameters: dbuser is 'dbo'                   9  0.013426
    4 ETW000  [dev trc     ,00000]  Using Provider SQLNCLI                             12800  0.026226
    4 ETW000  [dev trc     ,00000]  OpenOledbConnection: MARS property was set successfully.
    4 ETW000                                                                             570  0.026796
    4 ETW000  [dev trc     ,00000]  Provider Release:9.00.4035.00                      54486  0.081282
    4 ETW000  [dev trc     ,00000]  Using Provider SQLNCLI                              3456  0.084738
    4 ETW000  [dev trc     ,00000]  OpenOledbConnection: MARS property was set successfully.
    4 ETW000                                                                             311  0.085049
    4 ETW000  [dev trc     ,00000]  i'm dbo but there exists 1 users <> dbo with tables SVERS ==> connect terminated
    4 ETW000                                                                            8298  0.093347
    2EETW169 no connect possible: "DBMS = MSSQL                            ---  SERVER = 'PRDTEST' DBNAME = 'DBS'"
    Regards
    Jack Lee

  • Error while attaching a image in forms10g envion..

    hi
    i am getting this error while attaching a image in forms 10g enviornment.
    ERROR>WUC-24 [URLDownload.pullFile()] Error reading URL http :// 10.80.50.222:7778/forms90/webutil/jacob.dll
    regards
    Geo.

    did you install jacob ? with the correct version number described in the installation-guides.
    jacob is not an oracle tool, which normally is only useful for COM-commands against windows.
    What did you do with the image?

  • Error while importing a new CERT in oracle 10G B2B

    Hi All,
    I am trying to upload a new certificate in 10 G B2B server, its not updating a certificate, I am facing the below error while importing
    Error
    An error occurred when updating the certificate.
    Error -: AIP-16001: The model validation engine failed due to an internal system error.
    Error -: AIP-11052: Writing following objects: Certificate failed due to following constraint violation: CERTIFICATE. CAN NOT UPDATE UNVERSIONABLE OBJECT IN A VALIDATED CONFIGURATION.
    Note: Please help me in resolving this ASAP.
    Regards
    Sai

    Hi Sai,
    It seems you are updating certificate in a delivery channel which is being used in a validated (or may be deployed) agreement. Please retire/purge any deployed configuration which is using that delivery channel and also make sure no such agreement is in valid state(which is using this delivery channel).
    Regards,
    Anuj

  • Error while importing a table index.

    Hi,
    We are facing a problem while importing an index to the production region. Below are the details.
    1. A secondary index was created on standard SAP table ILOA in DEV region.
    2. The Index was successfully moved to the Quality system, without any glitches.
    3. Due to some issue (releated to testing, for which we had to revert back the changes), we had to delete the index on ILOA in the DEV region. The transports were moved to the PPD region and hence, the index on ILOA was deleted in PPD also.
    4. Once the issue related to testing was resolved, we again created an index on the table ILOA and moved it to PPD.
    All these 4 mentioned steps happened successfully and in PPD there was no error while importing the transports.
    But, while moving the above transports to the Production region, there was an error :
    "Index ILOA~Y could not be activated
    (E - No index ILOA~Y found with status M)"
    Please note that Y is the name of the index that was created on the table ILOA.
    The error code that we have got is "8".
    Can anyone please shed any light on what the issue is?? WE cannot re-import the transports in to Production without analysing this issue,because our client doesnt permit that.
    Thanks and eagerly awaiting a kind reply.
    Regards,
    Raghavendra.

    You've three transports - one to create the index, one to delete, and one to recreate.  It could be that the the third one tried to run before the database had finished with the second?
    Have you looked on SE14 for the actual status on production of the index?
    matt

  • MII 14.0 SP4 :Migration error while importing SAP BM Templates

    Hi Experts,
    I am facing some migration errors while importing SAP Batch Manufacturing Templates into MII 14.0 SP4.
    There are almost 23 transactions which are not getting imported and the error message for all of them is-
    "Unable to migrate transaction Unable to import file
    <Name of the Transaction>"
    Any first hand experiences will be really helpful for me to proceed further.
    Regards,
    Muddassar Khan

    Hi All,
    Got the solution. The STARTUP.BAT file is been placed in the installation directory(usr/sap) and then it works fine. Also I have installed the patches and all working fine.
    Any way thanks for the answer christian libich.
    Regards
    G.Partheeban

Maybe you are looking for

  • Help after software upload error message 14

    My ipad was working perfecly until the new software upload for ipad. Itunes then told me i had to restore my ipad. i keep getting error message 14. there was nothing wrong with my ipad or my computer prior to the software upload. i have contacted app

  • Open to the first page in a document

    Adobe Acrobat, reader and creator, both default to open a multiple page document, showing the page that was highlighted at the time that the document was saved. As a result, the next document viewer will see a page somewhere in the middle of the docu

  • Is there a Terminal command to set alternate row colors in Mail?

    I'd like to enable the alternate row colors in the message list, but the only way I can find to do it requires Developer tools to be installed. Not bad for my Mac, but it seems a bit of a workload for the other 19 Macs in the office. There's nothing

  • Primavera P6 v7 Installation help needed

    Hi all, im trying to install P6 v7 as a cleint server application (db on server, client local) and im having some issues, perhaps someone could point me in the right direction as i'm now at a loss as to how to proceed. I have done the following:- Ser

  • URL relative to flash button?

    Hey Flash Gurus! I'm finishing up a flash template that I have used on numerous occasions and it has worked really well. This time however, the nav button that is used to bring up html pages within my site got out of whack. I have checked (and change