ERROR WHILE IMPORTING SUPPORT PACKS

Hi all
       After successfull installation of ECC - SERVER , while importing SAP_BASIS support pack , spam stuck with XPRA_EXECUTION phase.
Kindly advice me resove this issue
selvan

Hi,
Provide Import and Action Logs for the Exact error (SPAM >Goto> import/action logs.
Regards
Umesh

Similar Messages

  • Errors while importing support

    hello all,
    I am getting following errors while importing support
    packages Queue SPAMu2026
    - Error in phase: CHECK_REQUIREMENTS
    - Reason for error: TP_CANNOT_CONNECT_SYSTEM
    - Return code: 0232
    - Error message: connect failed
    I have checked the TPPRAM file, RFC connection and
    it's normalu2026
    I even changed the directory to /usr/sap/trans/bin and
    executed command "tp connect <SID>" and same erroru2026
    Return code: 0232
    Also I tested the connectivity from STMS
    RFC Link tp was started successfully
    tp Version 340.15.02
    DB Connect Link to database failed
    Offline Call connect failed
    any ideas? any suggestions? I really need help.
    Jack Lee

    Dear All:
    the error still the same~
    I excuted the R3trans -d and came out like below:
    C:\Documents and Settings\dbsadm>R3trans -d
    This is R3trans version 6.13 (release 640 - 24.04.09 - 13:43:00).
    2EETW169 no connect possible: "DBMS = MSSQL                            ---  SERV
    ER = 'PRDTEST' DBNAME = 'DBS'"
    R3trans finished (0012).
    and here is the trans.log:
    4 ETW000 R3trans version 6.13 (release 640 - 24.04.09 - 13:43:00).
    4 ETW000 ===============================================
    4 ETW000
    4 ETW000 date&time   : 02.07.2005 - 15:36:52
    4 ETW000 control file: <no ctrlfile>
    4 ETW000 R3trans was called as follows: R3trans -d
    4 ETW000  trace at level 2 opened for a given file pointer
    4 ETW000  [dev trc     ,00000]  Sat Jul 02 15:36:55 2005                            6991  0.006991
    4 ETW000  [dev trc     ,00000]  db_con_init called                                    65  0.007056
    4 ETW000  [dev trc     ,00000]  create_con (con_name=R/3)                            183  0.007239
    4 ETW000  [dev trc     ,00000]  Loading DB library 'dbmssslib.dll' ...                51  0.007290
    4 ETW000  [dev trc     ,00000]  load shared library (dbmssslib.dll), hdl 0          1550  0.008840
    4 ETW000  [dev trc     ,00000]      using "C:\usr\sap\DBS\SYS\exe\run\dbmssslib.dll"
    4 ETW000                                                                              14  0.008854
    4 ETW000  [dev trc     ,00000]  Library 'dbmssslib.dll' loaded                         7  0.008861
    4 ETW000  [dev trc     ,00000]  function DbSlExpFuns loaded from library dbmssslib.dll
    4 ETW000                                                                              11  0.008872
    4 ETW000  [dev trc     ,00000]  Version of 'dbmssslib.dll' is "640.00", patchlevel (0.266)
    4 ETW000                                                                             492  0.009364
    4 ETW000  [dev trc     ,00000]  function dsql_db_init loaded from library dbmssslib.dll
    4 ETW000                                                                               9  0.009373
    4 ETW000  [dev trc     ,00000]  function dbdd_exp_funs loaded from library dbmssslib.dll
    4 ETW000                                                                              19  0.009392
    4 ETW000  [dev trc     ,00000]  New connection 0 created                              75  0.009467
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = -000000001 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              40  0.009507
    4 ETW000  [dev trc     ,00000]  db_con_connect (con_name=R/3)                         36  0.009543
    4 ETW000  [dev trc     ,00000]  find_con_by_name found the following connection for reuse:
    4 ETW000                                                                              10  0.009553
    4 ETW000  [dev trc     ,00000]  0: name = R/3, con_id = 000000000 state = DISCONNECTED, perm = YES, reco = NO , timeout = 000, con_max = 255, con_opt = 255, occ = NO
    4 ETW000                                                                              14  0.009567
    4 ETW000  [dev trc     ,00000]  Thread ID:2320                                      3431  0.012998
    4 ETW000  [dev trc     ,00000]  Thank You for using the SLOLEDB-interface             51  0.013049
    4 ETW000  [dev trc     ,00000]  Using dynamic link library 'C:\usr\sap\DBS\SYS\exe\run\dbmssslib.dll'
    4 ETW000                                                                              37  0.013086
    4 ETW000  [dev trc     ,00000]  dbmssslib.dll patch info                             117  0.013203
    4 ETW000  [dev trc     ,00000]    patchlevel   0                                     112  0.013315
    4 ETW000  [dev trc     ,00000]    patchno      266                                     8  0.013323
    4 ETW000  [dev trc     ,00000]    patchcomment Batch jobs stay in Ready status (1291921)
    4 ETW000                                                                              10  0.013333
    4 ETW000  [dev trc     ,00000]  np:(local) connection used on PRDTEST                 84  0.013417
    4 ETW000  [dev trc     ,00000]  CopyLocalParameters: dbuser is 'dbo'                   9  0.013426
    4 ETW000  [dev trc     ,00000]  Using Provider SQLNCLI                             12800  0.026226
    4 ETW000  [dev trc     ,00000]  OpenOledbConnection: MARS property was set successfully.
    4 ETW000                                                                             570  0.026796
    4 ETW000  [dev trc     ,00000]  Provider Release:9.00.4035.00                      54486  0.081282
    4 ETW000  [dev trc     ,00000]  Using Provider SQLNCLI                              3456  0.084738
    4 ETW000  [dev trc     ,00000]  OpenOledbConnection: MARS property was set successfully.
    4 ETW000                                                                             311  0.085049
    4 ETW000  [dev trc     ,00000]  i'm dbo but there exists 1 users <> dbo with tables SVERS ==> connect terminated
    4 ETW000                                                                            8298  0.093347
    2EETW169 no connect possible: "DBMS = MSSQL                            ---  SERVER = 'PRDTEST' DBNAME = 'DBS'"
    Regards
    Jack Lee

  • XPRA_EXECUTION error while importing Support stack 8 in Solution manager 4

    We have installed Solution managr 4.0 on Windows 2003 OS. We are trying to inport support stack 8, but we are getting the XPRA_EXECUTION error while importing SAPKW70009. Following is the error log
    Short text
    Syntax error in program "CL_RSOBJS_TYPE_MANAGER========CP ".
    What happened?
    Error in the ABAP Application Program
    The current ABAP program "SAPLRSVERS" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program
    "CL_RSOBJS_TYPE_MANAGER========CP " in include
    "CL_RSOBJS_TYPE_MANAGER========CM00G " in
    line 1:
    "Method "GET_TEXT_OF_SEARCH_ATTRIBUTE" does not exist. There is, howeve"
    "r a method with the similar name "GET_SEARCH_ATTRIBUTES"."
    The include has been created and last changed by:
    Created by: "SAP "
    Last changed by: "SAP "
    What can you do?
    Please eliminate the error by performing a syntax check
    (or an extended program check) on the program "CL_RSOBJS_TYPE_MANAGER========CP
    You can also perform the syntax check from the ABAP Editor.
    If the problem persists, proceed as follows:
    Note down which actions and inputs caused the error.
    To process the problem further, contact you SAP system
    administrator.
    Using Transaction ST22 for ABAP Dump Analysis, you can look
    at and manage termination messages, and you can also
    keep them for a long time.
    Error analysis
    The following syntax error was found in the program
    CL_RSOBJS_TYPE_MANAGER========CP :
    "Method "GET_TEXT_OF_SEARCH_ATTRIBUTE" does not exist. There is, howeve"
    "r a method with the similar name "GET_SEARCH_ATTRIBUTES"."
    We have tried clearing the queue and restarting the import but it does not work.
    Can anyone please help us with the same.

    Please, i need help. I have a problem when importing SAPKB62030 on phase XPRA_EXECUTION. This is the error:
      The import was stopped, since an error occurred during the phase          
      XPRA_EXECUTION, which the Support Package Manager is unable to resolve    
      without your input.                                                                               
    After you have corrected the cause of the error, continue with the        
      import by choosing Support Package -> Import queue from the initial       
      screen of the Support Package Manager.                                                                               
    The following details help you to analyze the problem:                                                                               
    -   Error in phase: XPRA_EXECUTION                                                                               
    -   Reason for error: TP_STEP_FAILURE                                                                               
    -   Return code: 0008                                                                               
    -   Error message: OCS Package SAPKB62030, tp step R, return code     
              0008                                                                               
    What can i doing?

  • While Import support package getting error in R/3

    Hi All,
    I am getting one error following error while importing support package in R/3.
    Open data extraction requests
    The system has found a number of open data extraction requests.These should be processed before starting the object import process, as changes to DDIC structures could prevent data extraction requests from being read after the import, thus causing them to terminate. Call the Customizing Cockpit data extraction transaction and process all open extraction requests.
    Can Anybody aware of this error. How do I delete the open data extraction process specified here.
    Thx & Regds,
    SGK

    Hi,
    I think I have to stop extraction process in LBWE or R/3. Can anybody tell me how to stop extraction process.
    Thx & Regds,
    SGK

  • Error getting while importing support package in R/3

    Hi All,
    I am getting one error following error while importing support package in R/3.
    Open data extraction requests
    The system has found a number of open data extraction requests.These should be processed before starting the object import process, as changes to DDIC structures could prevent data extraction requests from being read after the import, thus causing them to terminate. Call the Customizing Cockpit data extraction transaction and process all open extraction requests.
    Can Anybody aware of this error.
    Thx & Regds,
    SGK

    Hi,
    I think I have to stop extraction process in LBWE or R/3. Can anybody tell me how to stop extraction process.
    Thx & Regds,
    SGK

  • Error importing support pack SAPKH60011 (SAP_APPL)

    Dear All,
       I am faceing one error when applying support pack SAPKH60011 can not apply showing error " The import was stopped since an error occurred during tha phase IMPORT _PROPER ....". for details i here attached screenshot .
    Pls. reply ,
    Thanks and regards,
    Mayur

    Hi Mayur,
    You need to check the latest alog, ulog and slog.
    Check the main import log SAPI<package name> which should be in usr/sap/trans/log
    This will cotnain details of why the import failed.
    It it failed due to a deadlock occuring which can occur if someone is using the system while import is occuring, you should restart the database to clear any locks before attmpting the import again.
    Another cause of failure during import can be the use of out of date transport tools. Please ensure you are using the latest tp and R3trans available for your release from the service marketplace.
    Are you still able to access the system and repeat the import via SPAM?
    If every transaction is resulting in a dump and Syntax errors, then please open a message with SAP and provide the alog, ulog and slog along with the main import log and screenshots of the results of
    tp showbuffer <sid> pf=<path to transport profile> tag=SPAM
    and screenshots of the contents of usr/sap/trans/tmp
    for further analysis. Also, please do NOT make any manual commands or changes to the buffer or it can make the situation worse.
    Ensure if the import has failed, that the related SAPKK<package name> is renamed / moved from usr/sap/trans/tmp if it is still there from the failed import attempt. If they are still there when you try a new import, the slog will filll with entries of
    warning file ...... is already in use, waiting 30 seconds
    and the import will not progress.
    These files will be created once the new import is started.
    When repeating the import, please monitor the SLOG entries and see that usr/sap/trans/log and usr/sap/trans/tmp are being updated regularly, this will allow you to see the progress of the import.
    Please update with the contents of SAPI...... if the import still fails.
    Best regards,
    Paul

  • Error while importing data in SSAS Tabular Model

    I am new to the concept Tabular Model in SSAS 2014.
    I am trying to create one tabular model based on Adventureworks DW 2014.
    I am getting below error while importing tables to create model.
    "OLE DB or ODBC error: Login failed for user 'ASIAPAC\CSCINDAE732028$'.; 28000.
    A connection could not be made to the data source with the DataSourceID of '98c2d415-1e84-469c-a170-2bcacd779c1a', Name of 'Adventure Works DB from SQL'.
    An error occurred while processing the partition 'Customer_65240c88-55e7-416c-a7ac-732dece8be8e' in table 'Customer_65240c88-55e7-416c-a7ac-732dece8be8e'.
    The current operation was cancelled because another operation in the transaction failed."
    But while creating the Datasource, it has created successfully (below img)
    But while importing the facing the below error.
    Note:
    I have multiple instances in my system with unique names.
    Is this causing any ambiguity issues in selecting right instances?

    Hi Naveen，
    Based on your screenshots, you fail to open a connection to the data source. Right?
    In this scenario, the first screenshot you post is for creating a connection to server with the current windows authentication, not for connecting a data source. So the "Test Connection succeed" means your current windows user can connect
    to server, not connect to the database your selected in the dropdown list. Then you click next, you can choose account to access the data source. Based on the information, your service account "'ASIAPAC\CSCINDAE732028$" doesn't have permission to
    access the database you selected. Please grant the permission for the service account in SSMS.
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou
    If you have any feedback on our support, please click here.

  • Issue while apply support pack SAP_BASIS SAPKB70013 -18

    Hi Gurus,
    We have issue while apply support pack to Development system, we have implemented SAPKB70012 pack first and then we have implemented SPAU and saved in Trasport request  . while applying other patch SAPKB70013 -18 in one go system asked us to release SPAU  transport and then we released that transport after that same transport with auotomatic job it has got implemneted to Quality system and then after that we got below error in quality system :-
    The function module "EXTENDED_AUTH_CHECK_FOR_REPS" is called, but
    cannot be found in its function group.
    Error in the ABAP Application Program
    The current ABAP program "SAPLS38E" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
    Please suggest now both system is not working .
    Regards,
    Jeetendra

    Also you can check object modifications in transaction SE03 looking for request that touched object SAPLS38E.
    Could you please share the syntax error message ?
    Best regards

  • Error while importing music in iMovie 11 From itunes 10

    Error while importing music in iMovie 11
    I have the same error explained in a other post which was still left unanswered
    I have this sound problem after reorganising folders by itunes, i tried to delete al files in itunes and also
    deleted the xml file in the itunes dir, created new playlists, but still i have no music sound in imovie timeline
    after dragging a mp3 into it. When i preview the file in imovie it souds ok.
    Also i see the red dot with the number 1 in the itunes logo while dragging the mp3.
    Is there a solution for this problem?
    Former post;
    Re: Error while importing music in iMovie 09 from iTunes 09
    Posted: Jul 24, 2010 8:08 AM   in response to: vincentplaces  
    I'm having the exact same issue, but still haven't figured out what it is. I note that at the top of this thread it indicates that there are two "helpful" entries and one "solved" entry, but I can't find the solved one, so maybe someone will repost it here or kindly link to it.
    There is one icon missing though.
    As I read through the excellent tutorial at http://www.kenstone.net/fcphomepage/imovie_09stone.html I scroll down to the point where he talks about dragging music in from iTunes, which is what I'm trying to do. I can see, in his screen shot, the extra little icon that is a red oval and a white "1" in it. I don't get that icon when I am trying to drag my music into the video. I do get the green and white plus icon when I try to drag my music in. Also I DO get BOTH the red 1 and the green plus when I try dragging in a sound effect, which I can do with no problem. But why not the music?
    I've been able to drag in music with no problem in other productions, so I can't figure out what is going on with this one. I'm sure there is a setting somewhere that got flipped, but I can't figure out where.
    In desperation I also tried adding an extra title slide at the end of my video just to make sure there is more video time than music time in the production, but that didn't help at all.
    Any help guys?
    iMac 27"   Mac OS X (10.6.4)    

    Hi
    Due to some kind of copy protection in iTunes - I don't copy directly from this in iMovie
    to my projects. (Most often the result of doing it in iMovie is a DVD without any sound)
    I do
    • In iTunes - collect needed audio into a new Playlist
    • then burn this out as an Audio-CD .aiff (NOT .mp3)
    • This CD I copy into a folder on my Mac (often containing other material that's connected to the project)
    • And then I drag and drop these .aiff files into my movie project in iMovie.
    This works Greatly and even more so when I do my DVD.
    Yours Bengt W

  • Error while importing a new CERT in oracle 10G B2B

    Hi All,
    I am trying to upload a new certificate in 10 G B2B server, its not updating a certificate, I am facing the below error while importing
    Error
    An error occurred when updating the certificate.
    Error -: AIP-16001: The model validation engine failed due to an internal system error.
    Error -: AIP-11052: Writing following objects: Certificate failed due to following constraint violation: CERTIFICATE. CAN NOT UPDATE UNVERSIONABLE OBJECT IN A VALIDATED CONFIGURATION.
    Note: Please help me in resolving this ASAP.
    Regards
    Sai

    Hi Sai,
    It seems you are updating certificate in a delivery channel which is being used in a validated (or may be deployed) agreement. Please retire/purge any deployed configuration which is using that delivery channel and also make sure no such agreement is in valid state(which is using this delivery channel).
    Regards,
    Anuj

  • Error while importing a table index.

    Hi,
    We are facing a problem while importing an index to the production region. Below are the details.
    1. A secondary index was created on standard SAP table ILOA in DEV region.
    2. The Index was successfully moved to the Quality system, without any glitches.
    3. Due to some issue (releated to testing, for which we had to revert back the changes), we had to delete the index on ILOA in the DEV region. The transports were moved to the PPD region and hence, the index on ILOA was deleted in PPD also.
    4. Once the issue related to testing was resolved, we again created an index on the table ILOA and moved it to PPD.
    All these 4 mentioned steps happened successfully and in PPD there was no error while importing the transports.
    But, while moving the above transports to the Production region, there was an error :
    "Index ILOA~Y could not be activated
    (E - No index ILOA~Y found with status M)"
    Please note that Y is the name of the index that was created on the table ILOA.
    The error code that we have got is "8".
    Can anyone please shed any light on what the issue is?? WE cannot re-import the transports in to Production without analysing this issue,because our client doesnt permit that.
    Thanks and eagerly awaiting a kind reply.
    Regards,
    Raghavendra.

    You've three transports - one to create the index, one to delete, and one to recreate.  It could be that the the third one tried to run before the database had finished with the second?
    Have you looked on SE14 for the actual status on production of the index?
    matt

  • MII 14.0 SP4 :Migration error while importing SAP BM Templates

    Hi Experts,
    I am facing some migration errors while importing SAP Batch Manufacturing Templates into MII 14.0 SP4.
    There are almost 23 transactions which are not getting imported and the error message for all of them is-
    "Unable to migrate transaction Unable to import file
    <Name of the Transaction>"
    Any first hand experiences will be really helpful for me to proceed further.
    Regards,
    Muddassar Khan

    Hi All,
    Got the solution. The STARTUP.BAT file is been placed in the installation directory(usr/sap) and then it works fine. Also I have installed the patches and all working fine.
    Any way thanks for the answer christian libich.
    Regards
    G.Partheeban

  • Error while import PAR with schedule task

    Hi everybody
    I've the following error while import a new PAR with schedule task in Portal NW04s
    Inner Stack is:
    Unable to lock the local configuration to run import "import_it.tsf.pld.cercapersone.updateadgruppofs.st.prjconfig_config_fwk_service_4692550,4692550_(ready)".
    System error is "LockConfigException: Configuration framework system error: "configuration-lock-service overloaded: cannot acquire central-lock file for config://local"".
    Inner Stack is:
    LockConfigException: Configuration framework system error: "configuration-lock-service overloaded: cannot acquire central-lock file for config://local"
    at com.sapportals.config.fwk.data.ConfigLockManager.lockWithDependent(ConfigLockManager.java:507)
    thanks in advance

    Hi Ram,
    I've encountered the problem only on productive instance with offline deployment (Scheduler Tasks reinitialize CRT). Before a restart I have to make sure it works.
    thanks for your help!
    Gennaro

  • Error while importing a dump file in my local database

    Hi,
    I have a dump file named *"system_21Sep2010_DVSD.DMP"* which i'm trying to import in my local database named *"nandita1"*.
    The dump file is found under the following path *"C:\DevSuiteHome_1\BIN"* and i executed the following command for importing the dump file:
    C:\DevSuiteHome_1\BIN>imp system/system@nandita1 FILE=system_21Sep2010_DVSD.DMP FULL=YES
    I'm getting the following error while importing the dump file:
    Import: Release 10.1.0.4.2 - Production on Wed Oct 6 16:25:37 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
    tion
    With the Partitioning, OLAP and Data Mining options
    Export file created by EXPORT:V10.01.00 via conventional path
    import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    IMP-00015: following statement failed because the object already exists:
    "CREATE UNDO TABLESPACE "UNDOTBS1" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DV"
    "SD/undotbs01.dbf' SIZE 104857600 AUTOEXTEND ON NEXT 5242880 MAXSIZE "
    "32767M EXTENT MANAGEMENT LOCAL "
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "SYSAUX" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/sysa"
    "ux01.dbf' SIZE 367001600 AUTOEXTEND ON NEXT 10485760 MAXSIZE 32767M "
    "EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANA"
    "GEMENT AUTO"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TEMPORARY TABLESPACE "TEMP" BLOCKSIZE 8192 TEMPFILE '/oradata_dev/D"
    "VSD/temp01.dbf' SIZE 20971520 AUTOEXTEND ON NEXT 655360 MAXSIZE 3276"
    "7M EXTENT MANAGEMENT LOCAL UNIFORM SIZE 1048576"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "USERS" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/users"
    "01.dbf' SIZE 5242880 AUTOEXTEND ON NEXT 1310720 MAXSIZE 32767M EXTEN"
    "T MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT SEGMENT SPACE MANAGEMEN"
    "T AUTO"
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "XX_DATA" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/XX_"
    "DATA01.dbf' SIZE 140509184 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M"
    " EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT "
    IMP-00015: following statement failed because the object already exists:
    "CREATE TABLESPACE "XX_INDEX" BLOCKSIZE 8192 DATAFILE '/oradata_dev/DVSD/XX"
    "_INDEX.dbf' SIZE 93323264 AUTOEXTEND ON NEXT 1048576 MAXSIZE 32767M "
    "EXTENT MANAGEMENT LOCAL AUTOALLOCATE ONLINE PERMANENT "
    IMP-00015: following statement failed because the object already exists:
    "CREATE PROFILE "MONITORING_PROFILE" LIMIT COMPOSITE_LIMIT DEFAULT SESSIONS_"
    "PER_USER DEFAULT CPU_PER_SESSION DEFAULT CPU_PER_CALL DEFAULT LOGICAL_READS"
    "_PER_SESSION DEFAULT LOGICAL_READS_PER_CALL DEFAULT IDLE_TIME DEFAULT CONNE"
    "CT_TIME DEFAULT PRIVATE_SGA DEFAULT FAILED_LOGIN_ATTEMPTS UNLIMITED PASSWOR"
    "D_LIFE_TIME DEFAULT PASSWORD_REUSE_TIME DEFAULT PASSWORD_REUSE_MAX DEFAULT "
    "PASSWORD_LOCK_TIME DEFAULT PASSWORD_GRACE_TIME DEFAULT"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "OUTLN" IDENTIFIED BY VALUES '4A3BA55E08595C81' TEMPORARY TABLE"
    "SPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "TSMSYS" IDENTIFIED BY VALUES '3DF26A8B17D0F29F' DEFAULT TABLES"
    "PACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "ANONYMOUS" IDENTIFIED BY VALUES 'anonymous' DEFAULT TABLESPACE"
    " "SYSAUX" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "OLAPSYS" IDENTIFIED BY VALUES '3FB8EF9DB538647C' DEFAULT TABLE"
    "SPACE "SYSAUX" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "MDDATA" IDENTIFIED BY VALUES 'DF02A496267DEE66' DEFAULT TABLES"
    "PACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "SYSMAN" IDENTIFIED BY VALUES '28F72A3C2D75FDE9' DEFAULT TABLES"
    "PACE "SYSAUX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "MGMT_VIEW" IDENTIFIED BY VALUES '442167C25FAC883C' TEMPORARY T"
    "ABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "SCOTT" IDENTIFIED BY VALUES 'F894844C34402B67' DEFAULT TABLESP"
    "ACE "USERS" TEMPORARY TABLESPACE "TEMP" PASSWORD EXPIRE ACCOUNT LOCK"
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "BUXXDDWA" IDENTIFIED BY VALUES '2672292A792DB64B' DEFAULT TABL"
    "ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXDDWA" IDENTIFIED BY VALUES 'F5C178B2796496F4' DEFAULT TABLES"
    "PACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "BUXXDDWS" IDENTIFIED BY VALUES '06D47E0665132890' DEFAULT TABL"
    "ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "BUXXSUC" IDENTIFIED BY VALUES '1705C688518ADCDC' DEFAULT TABLE"
    "SPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "JIRAUSER" IDENTIFIED BY VALUES 'F0E1C662FCD1E09F' DEFAULT TABL"
    "ESPACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXSFA" IDENTIFIED BY VALUES 'C3DFA37A29E072B6' DEFAULT TABLESP"
    "ACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXDDW" IDENTIFIED BY VALUES 'CFF3D9B1B6C20DCC' DEFAULT TABLESP"
    "ACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXDDWS" IDENTIFIED BY VALUES '9EF0EE1BAC5855C4' DEFAULT TABLES"
    "PACE "XX_DATA" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE USER "XXSUC" IDENTIFIED BY VALUES '39594B53A6F1CED0' DEFAULT TABLESP"
    "ACE "XX_INDEX" TEMPORARY TABLESPACE "TEMP""
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "SELECT_CATALOG_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "SELECT_CATALOG_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "EXECUTE_CATALOG_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "EXECUTE_CATALOG_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "DELETE_CATALOG_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "DELETE_CATALOG_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "RECOVERY_CATALOG_OWNER""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "RECOVERY_CATALOG_OWNER" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "GATHER_SYSTEM_STATISTICS""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "GATHER_SYSTEM_STATISTICS" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "LOGSTDBY_ADMINISTRATOR""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "LOGSTDBY_ADMINISTRATOR" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "AQ_ADMINISTRATOR_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "AQ_USER_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "AQ_USER_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "GLOBAL_AQ_USER_ROLE" IDENTIFIED GLOBALLY "
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "SCHEDULER_ADMIN""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "SCHEDULER_ADMIN" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "HS_ADMIN_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "HS_ADMIN_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "AUTHENTICATEDUSER""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "AUTHENTICATEDUSER" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OEM_ADVISOR""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OEM_ADVISOR" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OEM_MONITOR""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OEM_MONITOR" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "WM_ADMIN_ROLE""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "WM_ADMIN_ROLE" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVAUSERPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVAUSERPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVAIDPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVAIDPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVASYSPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVASYSPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVADEBUGPRIV""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVADEBUGPRIV" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "EJBCLIENT""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "EJBCLIENT" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVA_ADMIN""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVA_ADMIN" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "JAVA_DEPLOY""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "JAVA_DEPLOY" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "CTXAPP""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "CTXAPP" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "XDBADMIN""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "XDBADMIN" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "XDBWEBSERVICES""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "XDBWEBSERVICES" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OLAP_DBA""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OLAP_DBA" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "OLAP_USER""
    IMP-00015: following statement failed because the object already exists:
    "REVOKE "OLAP_USER" FROM SYSTEM"
    IMP-00015: following statement failed because the object already exists:
    "CREATE ROLE "MGMT_USER""
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "MVIEW$_ADVSEQ_GENERIC" MINVALUE 1 MAXVALUE 4294967295 INCR"
    "EMENT BY 1 START WITH 1 CACHE 50 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "MVIEW$_ADVSEQ_ID" MINVALUE 1 MAXVALUE 4294967295 INCREMENT"
    " BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "LOGMNR_EVOLVE_SEQ$" MINVALUE 1 MAXVALUE 999999999999999999"
    "999999999 INCREMENT BY 1 START WITH 1 CACHE 20 ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "LOGMNR_SEQ$" MINVALUE 1 MAXVALUE 9999999999999999999999999"
    "99 INCREMENT BY 1 START WITH 1 CACHE 20 ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "LOGMNR_UIDS$" MINVALUE 1 MAXVALUE 999999999999999999999999"
    "999 INCREMENT BY 1 START WITH 100 CACHE 20 ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_FLAVORS_S" MINVALUE -2147483647 MAXVALUE 214748364"
    "7 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_FLAVOR_NAME_S" MINVALUE 1 MAXVALUE 999999999999999"
    "999999999999 INCREMENT BY 1 START WITH 1 NOCACHE NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_REPPROP_KEY" MINVALUE 1 MAXVALUE 99999999999999999"
    "9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT_LOG_SEQUENCE" MINVALUE 1 MAXVALUE 99999999999999999"
    "9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_REFRESH_TEMPLATES_S" MINVALUE 1 MAXVALUE 999999999"
    "999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_USER_AUTHORIZATIONS_S" MINVALUE 1 MAXVALUE 9999999"
    "99999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_REFGROUPS_S" MINVALUE 1 MAXVALUE 99999999"
    "9999999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_OBJECTS_S" MINVALUE 1 MAXVALUE 9999999999"
    "99999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_PARMS_S" MINVALUE 1 MAXVALUE 999999999999"
    "999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_USER_PARM_VALUES_S" MINVALUE 1 MAXVALUE 9999999999"
    "99999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMPLATE_SITES_S" MINVALUE 1 MAXVALUE 999999999999"
    "999999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_TEMP_OUTPUT_S" MINVALUE 1 MAXVALUE 999999999999999"
    "999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_RUNTIME_PARMS_S" MINVALUE 1 MAXVALUE 9999999999999"
    "99999999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "TEMPLATE$_TARGETS_S" MINVALUE 1 MAXVALUE 99999999999999999"
    "9999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "REPCAT$_EXCEPTIONS_S" MINVALUE 1 MAXVALUE 9999999999999999"
    "99999999999 INCREMENT BY 1 START WITH 1 CACHE 20 NOORDER NOCYCLE"
    . importing OLAPSYS's objects into OLAPSYS
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "OLAP_ID_SEQ" MINVALUE 1 MAXVALUE 9999999999999999999999999"
    "99 INCREMENT BY 1 START WITH 122 NOCACHE NOORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "OLAP_IRID" MINVALUE 1 MAXVALUE 999999999999999999999999999"
    " INCREMENT BY 1 START WITH 24 NOCACHE ORDER NOCYCLE"
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "CWM2_OLAP_ENABLESEQ" MINVALUE 1 MAXVALUE 9999 INCREMENT BY"
    " 1 START WITH 1 NOCACHE ORDER CYCLE"
    I've been waiting for hours, but still it is blocked at the same place, that is:
    IMP-00015: following statement failed because the object already exists:
    "CREATE SEQUENCE "CWM2_OLAP_ENABLESEQ" MINVALUE 1 MAXVALUE 9999 INCREMENT BY"
    " 1 START WITH 1 NOCACHE ORDER CYCLE"
    I've tried recreating the database, but still the error is the same.
    I've tried including the ignore=Y, that is:
    C:\DevSuiteHome_1\BIN>imp system/system@nandita1 FILE=system_21Sep2010_DVSD.DMP
    FULL=YES IGNORE=YES
    The error generated is as displayed below:
    Import: Release 10.1.0.4.2 - Production on Wed Oct 6 16:34:04 2010
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Produc
    tion
    With the Partitioning, OLAP and Data Mining options
    Export file created by EXPORT:V10.01.00 via conventional path
    import done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
    . importing OLAPSYS's objects into OLAPSYS
    Over here also, i had to kill the process since it was blocked at the following statement: ". importing OLAPSYS's objects into OLAPSYS"
    Please can someone help me out.
    Thanking in advanced

    plzzzzzzzzzzzzzzzzz.............sme1 help me out

  • Connection Failed Error while Importing tables in 11.1.1.6 on Windows 7

    Hi,
    Can you please help me in resolving the connection failed error while importing the tables from the database.
    I am using OBI 11.1.1.6 on Windows 7
    You help is highly appreciated. I have followed all the below blogs but still i was not able to resolve the issue.
    http://123obi.com/2011/03/error-the-connection-has-failed-in-obiee-11g/
    http://obieedeveloper.blogspot.in/2012/03/connection-failed-error-in-obiee-11-g.html
    http://iadviseblog.wordpress.com/2011/05/29/obiee-11g-error-in-importing-metadata/
    http://www.obieefans.com/%E2%80%9Cthe-connection-has-failed%E2%80%9D-error-in-obiee-11g-admin-tool/
    Thanks in Advance
    Siva

    It would be nice if you put your issues instead of asking to look those many urls.
    try using tns entry in connection pool or follow this thread
    Connection failed in OBIEE 11g

Maybe you are looking for

  • CSV export problem with multiple pages

    I have a simple report with pagination and export to excel enabled. If I paginate from page 1, without exporting to excel, to any other page, then export to Excel, I get "No data found." in the CSV output file. If I export from Page 1 first, then the

  • Dynamic scrap praposal - Incremental scrap

    Hi all, We are going to implement scrap functionality in one our project. In that project client requirement is dynamic proposal of scrap based on the quantity. We need this scrap praposal prefferably at assembly scrap level. For exampl: 0 - 1000 ord

  • Replacement not like new

    I just got back my unit after being without it for a month as I had it serviced because of faulty head phone connection. I purchased my Zen Mini in January and was loving it, after an exhausti've decision NOT to go Apple. The unit I just got back has

  • Define HTML Tag for Parser - Help?

    Hi all, I'm trying to write a program which downloads a HTML script, parses it, extracts the links and checks to see which of these links are broken. While the parser is picking up tags that are well-formed, such as: Mark Humphrys - Research - The HT

  • " Cannot validate contents " error message

    I have tried several times to download software updates available ( Java, Security 2011-11 and i tunes) and am getting the error message "Installer cannot validate contents, contact manufacturer". I've tried downloading directly from apple website an