Error while init load of ODS

HI Gurus,
I deleted entire ODS data.And now want to do reinit load.But i am getting below error.
From where I can see and delete delta queue.How to do that resetting status and all..
Error for init package :
Deltas have already been loaded for the init. selection of request REQU_4EBWUXD8QKYLD7YV635G17CCR. A second initialization is therefore not possible with these selection conditions.
Procedure
If you want to carry out a new initialization, you have to choose selections that do not overlap.
If you want to repeat the init. for the same selection, you have to delete the delta queue in the source system, and restart the delta process.
Choose the menu entry 'Init. Selections in the Source System' from the Scheduler.
Please help.
Thanks,
Prasanna N.
Edited by: prasanna nadgouda on Jul 1, 2009 8:44 PM
Edited by: prasanna nadgouda on Jul 1, 2009 8:58 PM

HI,
While deleting that init request I get an warning..
If the delta process of your DataSource stipulates serialization, you can no longer post this init request or any subsequently requested delta requests to the DataStore objects that were filled previously, after you have deleted the initialization and reinitialized. This is because old inits and deltas still exist.
The DataStore object recognizes that new inits and deltas have been created that are not yet posted in the DataStore object and requires them to be updated. Otherwise the selections of the new inits overlap with the selections of the old inits that are still in the DataStore object, so that they cannot be posted.
Does this is somthing critical..How should I go ahead..?

Similar Messages

Error while data loading

Hi Gurus,
I am getting error while data loading. At BI side when I check the error it says Background Job Cancelled and when I check in R3 side I got the following error
Job started
Step 001 started (program SBIE0001, variant &0000000065503, user ID R3REMOTE)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 2LIS_11_V_ITM
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 2000683008                              *
abap/heap_area_total.......... 4000317440                              *
abap/heaplimit................ 40894464                                *
zcsa/installed_languages...... ED                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 6500352                                 *
ztta/roll_extension........... 3001024512                              *
4 LUWs confirmed and 4 LUWs to be deleted with function module RSC2_QOUT_CONFIRM_DATA
ABAP/4 processor: DBIF_RSQL_SQL_ERROR
Job cancelled
Please help me out what should I do.
Regards,
Mayank

Hi Mayank,
The log says it went to short dump due to temp space issue.as its the source system job ,check in the source system side for temp table space and also check at the BI side as well.
Check with your basis regarding the TEMP PSA table space - if its out of space ask them to increase the table space and try to repeat the load.
Check the below note
Note 796422 - DBIF_RSQL_SQL_ERROR during deletion of table BWFI_AEDAT
Regards
KP
Edited by: prashanthk on Jul 19, 2010 10:42 AM

Error while uploading data from ODS to Cube

Hi All,
Will you please help out this issue.As this is a priority high issue,please reply if you know the answers.
I am facing an error while loading the data from ODS to CUBE,the error
is
1.Name is not in the namespace for generated BW Metaobjects
2.Error 18 in the update
And this error is occuring only in quality server.
Thanks,
Ram.

HI RAM SIVA,
make sure that the Data source is replicated and tranfer rules r active.
And also check whether the all transport requests r imported properly.
hope it helps
bhaskar

Error while data loading in real time cube

HI experts,
I have a problem. I am loading data from a flat file.The data is loading correctly till the DSO but when i am trying to load it into the cube it is giving an error.
The cube is a real time cube for PLANING. I have chnaged the status to allow data loading but still the DTP is giving an error.
It shows an error "error while extracting from DataStore" and some RSBK 224 ERROR and rsar 051 error.

What was the resolution to this issue. We rae having the same issue only with external system (not a flat file). We get the RSAR 051 with a return code of 238 error message, like it is not even getting to the rfc connection (DI_SOURCE). We have been facing this issue for a while and even opened up a message with SAP.

Error while making joins between ODS in a Infoset

I am getting these 2 errors while making a join between ODS In InfoSet
1).Incomplete ON conditions in an outer join
2).Invalid ON condition for left outer join (ZSDO015)
Please help what to do?

Hi,
Check both ODS's are having a common Infoobjects are not i.e. same name and datatype and length.
http://help.sap.com/saphelp_nw04/helpdata/en/44/b21f98be886a45a4bb7e123e86e4c2/frameset.htm
Thanks
Reddy

Error Message when loading an ODS from an ODS

Within a process chain we are loading an ODS from another ODS. This fails with the following message:
Job REQU_49HIKNN81WXVPRI80DC2TVCUF removed from periodical scheduling and terminated
Message no. RSM1170
Diagnosis
An end-date for the job is specified when the job is scheduled (no longer "start after date/time").
When the job is started for the first time, this end-date is applied to ALL subsequent periodical jobs.
This is different to the standard R/3 batch schedulings.
The end-date is checked each time the job is restarted, and if the end-date has passed, the job is removed from the schedule.
This is what has happened in this case.
Procedure
Reschedule the job if you want to keep it running.
Does anyone know where I can see/change the end date for this job or how I reschedule it?

Dear Barry,
1) Just go and make your req Red both n Data target and PC
2)Delete the error request
3)Get the Infopackage from PC header.
4)reshedule it again
Hope it solves your problem
Assign points if helpful
Regards
Bala

Error while init delta in source system

I use generic data source with generic delta
Delta field - DATUM (Calendar date)
Safety Interval Upper Limit = 1
Delta type = "New Status for Changed Records"
My underline table for data source has 53 records. All records DATUM field value is 2010/09/27.
I'm trying to do Init load today (2010/09/28) and getting no data with error message:
"Data in queue of DataSource Z_PU_IS_PS_98 has been deleted"
Why???? If we count "Safety interval upper limit 1" we'll get 2010/09/28 - 1 = 2010/09/27, so all records in table MUST BE catched by Init!
The data queue for the data source in RSA7 contains " - - " that is an empty value.
My question Why I can't init data source thou

now look that sap.help says http://help.sap.com/saphelp_nw04//helpdata/en/37/4f3ca8b672a34082ab3085d3c22145/content.htm :
+
Safety Interval Upper Limit
The delta-relevant field is a timestamp.
The timestamp that was read last is 12:00:00. Delta extraction begins at 12:30:00. The safety interval for the upper limit is 120 seconds. The safety interval for the delta request is: 12:00:00 to 12:28:00. Upon completion of the extraction, the pointer is set to 12:28:00.
Safety Interval Lower Limit
The delta-relevant field is a timestamp. After images are transferred. In other words, the record is overwritten with the status after the change in BW, for example for master data. Any duplicate records that appear have no effect upon the BW system.
The last changed timestamp is 12:28:00. Delta extraction begins at 13:00. The safety interval for the lower limit is 180secs. The safety interval for the delta request is: 12:25:00 to 13:00:00. Upon completion of the extraction, the pointer is set to 13:00:00.
+
If i'll use LOWER LIMIT I'll get 2010/09/29!

Error during Init loading

Hi All,
I am loading the data from source system to infocube. And extraction mode as init load.When I am executing, I am getting an ABAP Debugger window and I am unable to load the data.
Please could help, how to load the data without getting ABAP Debugger window.
Thanks in Advance.

Hi Abdul,
Please look for start routine, end routine, field routine, Transformation routine, Update rule routine and check either of this have any break point set in the code.
Also if you are using DTP, check the settings over there, whether you have selected Debug mode while scheduling the load.
This might help!
Regards,
Melissa

Error while running loading full load

Hi all,
I'm getting below error while running the mappings in DAC
INFO : LM_36488 [Fri Sep 11 02:47:04 2009] : (580|4952) Session task instance [SDE_ORA_CodeDimension_CostCenter] : [VAR_27028 Use override value [4,0] for mapping parameter:[MPLT_SA_ORA_CODES.$$DATASOURCE_NUM_ID].]
Regards
Rama

Hi all,
Detail Below Error,
INFO : LM_36435 [Fri Sep 11 03:11:49 2009] : (580|4952) Starting execution of workflow [SDE_ORA_CodeDimension_CostCenter] in folder [SDE_ORA11510_Adaptor] last saved by user [Administrator].
INFO : LM_44195 [Fri Sep 11 03:11:49 2009] : (580|4952) Workflow [SDE_ORA_CodeDimension_CostCenter] service level [SLPriority:5,SLDispatchWaitTime:1800].
INFO : LM_36330 [Fri Sep 11 03:11:49 2009] : (580|4952) Start task instance [Start]: Execution started.
INFO : LM_36318 [Fri Sep 11 03:11:49 2009] : (580|4952) Start task instance [Start]: Execution succeeded.
INFO : LM_36505 : (580|4952) Link [Start --> SDE_ORA_CodeDimension_CostCenter]: empty expression string, evaluated to TRUE.
INFO : LM_36388 [Fri Sep 11 03:11:49 2009] : (580|4952) Session task instance [SDE_ORA_CodeDimension_CostCenter] is waiting to be started.
INFO : LM_36682 [Fri Sep 11 03:11:49 2009] : (580|4972) Session task instance [SDE_ORA_CodeDimension_CostCenter]: started a process with pid [5644] on node [node01_obidevapp1].
INFO : LM_36330 [Fri Sep 11 03:11:49 2009] : (580|4972) Session task instance [SDE_ORA_CodeDimension_CostCenter]: Execution started.
INFO : LM_36488 [Fri Sep 11 03:11:50 2009] : (580|4972) Session task instance [SDE_ORA_CodeDimension_CostCenter] : [TM_6793 Fetching initialization properties from the Integration Service. : (Fri Sep 11 03:11:49 2009)]
INFO : LM_36488 [Fri Sep 11 03:11:50 2009] : (580|4972) Session task instance [SDE_ORA_CodeDimension_CostCenter] : [DISP_20305 The [Preparer] DTM with process id [5644] is running on node [node01_obidevapp1].
: (Fri Sep 11 03:11:49 2009)]
INFO : LM_36488 [Fri Sep 11 03:11:50 2009] : (580|4972) Session task instance [SDE_ORA_CodeDimension_CostCenter] : [PETL_24036 Beginning the prepare phase for the session.]
INFO : LM_36488 [Fri Sep 11 03:11:50 2009] : (580|4972) Session task instance [SDE_ORA_CodeDimension_CostCenter] : [TM_6721 Started [Connect to Repository].]
INFO : LM_36488 [Fri Sep 11 03:11:50 2009] : (580|4972) Session task instance [SDE_ORA_CodeDimension_CostCenter] : [TM_6722 Finished [Connect to Repository]. It took [0.312494] seconds.]
INFO : LM_36488 [Fri Sep 11 03:11:50 2009] : (580|4972) Session task instance [SDE_ORA_CodeDimension_CostCenter] : [TM_6794 Connected to repository [Oracle_BI_DW_Base] in domain [Domain_obidevapp1] user [Administrator]]
INFO : LM_36488 [Fri Sep 11 03:11:50 2009] : (580|4972) Session task instance [SDE_ORA_CodeDimension_CostCenter] : [TM_6721 Started [Fetch Session from Repository].]
INFO : LM_36488 [Fri Sep 11 03:11:50 2009] : (580|4972) Session task instance [SDE_ORA_CodeDimension_CostCenter] : [TM_6722 Finished [Fetch Session from Repository]. It took [0.406242] seconds.]
INFO : LM_36488 [Fri Sep 11 03:11:50 2009] : (580|4972) Session task instance [SDE_ORA_CodeDimension_CostCenter] : [VAR_27028 Use override value [(2,4,5,9,0)] for mapping parameter:[MPLT_SA_ORA_CODES.$$DATASOURCE_NUM_ID].]
ERROR : LM_36488 [Fri Sep 11 03:11:50 2009] : (580|4972) Session task instance [SDE_ORA_CodeDimension_CostCenter] : [CMN_1761 Timestamp Event: [Fri Sep 11 03:11:50 2009]]
ERROR : LM_36488 [Fri Sep 11 03:11:50 2009] : (580|4972) Session task instance [SDE_ORA_CodeDimension_CostCenter] : [VAR_27056 Data conversion error in converting [(2,4,5,9,0)].]
ERROR : LM_36488 [Fri Sep 11 03:11:50 2009] : (580|4972) Session task instance [SDE_ORA_CodeDimension_CostCenter] : [CMN_1761 Timestamp Event: [Fri Sep 11 03:11:50 2009]]
ERROR : LM_36488 [Fri Sep 11 03:11:50 2009] : (580|4972) Session task instance [SDE_ORA_CodeDimension_CostCenter] : [VAR_27054 Error in assigning initial data value to mapping parameter:[MPLT_SA_ORA_CODES.$$DATASOURCE_NUM_ID].]
ERROR : LM_36488 [Fri Sep 11 03:11:50 2009] : (580|4972) Session task instance [SDE_ORA_CodeDimension_CostCenter] : [CMN_1761 Timestamp Event: [Fri Sep 11 03:11:50 2009]]
ERROR : LM_36488 [Fri Sep 11 03:11:50 2009] : (580|4972) Session task instance [SDE_ORA_CodeDimension_CostCenter] : [TM_6270 Error: Variable parameter expansion error.]
ERROR : LM_36488 [Fri Sep 11 03:11:50 2009] : (580|4972) Session task instance [SDE_ORA_CodeDimension_CostCenter] : [CMN_1761 Timestamp Event: [Fri Sep 11 03:11:50 2009]]
ERROR : LM_36488 [Fri Sep 11 03:11:50 2009] : (580|4972) Session task instance [SDE_ORA_CodeDimension_CostCenter] : [TM_6163 Error initializing variables and parameters for the partition.]
ERROR : LM_36320 [Fri Sep 11 03:11:52 2009] : (580|4972) Session task instance [SDE_ORA_CodeDimension_CostCenter]: Execution failed.
WARNING : LM_36331 : (580|4972) Session task instance [SDE_ORA_CodeDimension_CostCenter] failed and its "fail parent if this task fails" setting is turned on. So, Workflow [SDE_ORA_CodeDimension_CostCenter] will be failed.
ERROR : LM_36320 [Fri Sep 11 03:11:52 2009] : (580|4972) Workflow [SDE_ORA_CodeDimension_CostCenter]: Execution failed.
Regards,
Rama

Error while extracting data from ODS using Infospokes - URGENT

Hi all,
I am extracting data from an ODS using infospokes and nothing fancy, no selection criteria but I am getting an error message saying
Syntax error in row3(-> long text) Msg id = "RG" and msgno is 102
Any ideas on how I can see what is the exact error and how to debug this?
thanks
Sabrina.

Hi Sabrina
service.sap.com can help you getting the details of your mesg.
I found one OSS note suitable to your mesg. So just check out OSS note # 671097. I hope this note will be some help to you. If not go and chk in the OSS you can find some more.
Here is the note details also
Symptom
Error message RG102: 'Syntax error in &1, row &2 (-> long text)' appears in the request log of an InfoSpoke.
Reason and Prerequisites
The data source is an ODS object and the extraction mode is 'delta'. The cause of the error message is that the ODS extractor is unable to select the request ID (InfoObject 0REQUID) from the change log of the ODS object. However, the request ID is mistakenly provided in the field list of the ODS object on the InfoSpoke maintenance screen. --
Solution
Delete the 0REQUID InfoObject from the field list of the InfoSpoke and activate the InfoSpoke. As of the patch mentioned below, the request ID in the template tab is no longer provided.
BW 3.0B
Import Support Package 16 for 3.0B (BW3.0B Patch 17 or SAPKW30B16) into your BW system. The Support Package will be available once note 571699 with the short text "SAPBWNews BW 3.0B Support Package 16", which describes this Support Package in more detail, has been released for customers.
BW 3.1 Content
Import Support Package 10 for 3.1 Content (BW3.10 Patch 11 or SAPKW31010) into your BW system. The Support Package will be available once note 571747 with the short text "SAPBWNews BW 3.1 Content Support Package 10" has been released for customers.
To provide information in advance, the notes mentioned above may already be available before the Support Package is released. In this case, however, the short text still contains the words "preliminary version".
Refer to note 110934, which contains information about BW Support Packages.
Regards,
Rohini

Error While Extracting Data in ODS

can anyone help me out i have created an ODS ZMM_OD81 but i got the following error messaged while extracting the data, pl. help me asap.
1. SIDs determined successfully for request REQU_3YGDERK275SLEUNKLGWOR30GZ from ODS object ZMM_OD81
2. Request REQU_3YGDERK275SLEUNKLGWOR30GZ , data package 000001 incorrect with status 9
3. Request REQU_3YGDERK275SLEUNKLGWOR30GZ , data package 000001 not correct
4. Inserted records 1- ; Changed records 1- ; Deleted records 1-
5. No confirmation for request ODSR_3YGHO1DSYIDFO0B7E8ZO2Q8MB when activating the ODS object ZMM_OD81
6. Communication error (RFC call) occurred
7. Activation of data records from ODS object ZMM_OD81 terminated.
thanx
abhishek suppal

Hi Abhishek,
I guess the error occured while activating the request and not while loading it. You can confirm this by checking in the details tab of the monitor for that request.
Try following the below steps. They might solve your problem.
1> Go to manage view of the ODS and force the QM status of the request to 'GREEN'.
2> Try activating the request manually.
Regards,
Sree

Error while laoding data from ODS to infocube

Hi all,
I am trying to load data from ODS to Cube but its giving error.
I am getting following error
An error occurred while executing a transformation rule:
The exact error message is:
The argument 'Result dependent booking' cannot be interpreted as a
number
The error was triggered at the following point in the program:
GPD5CD2GMGXQYJ77HKMS0C0CQVE 2510
System Response
     Processing the data record has been terminated.
Procedure
      The following additional information is included in the higher-level
     node of the monitor:
     o   Transformation ID
     o   Data record number of the source record
     o   Number and name of the rule which produced the error
Procedure for System Administration.
How to resolve this error, it will be great help if anyone post the steps

Thanks Ananda for your suggestion,
CAn you please tell me How to identify which rule has a problem ..is there any way which tell me which rule and which record is creating a problem

Error While Deleting Data From ODS

Hi all,
We are getting short dump while deleting data from a perticular ODS.
Part of short dump is--
trigger Location of Runtime Error
   Program                                 SAPLRSAC
   Include                                 LRSACU75
   Row                                     535
   Module type                             (FUNCTION)
   Module Name                             RSAR_TRANSTRUCTURE_ACTIVATE
help is desperately required
Regards
Srini--

try to activate InfoSource and later delete data.
Check if all ODS related objects are consistent and active.
also pls attached the whole dump for more clarity if this does not work.

Error while selecting Load Balancing in JCO creation

While creating JCO i am facing this error.It is working fine with Single server connection,but when i chose Load balancing i error comes out.Please tell me the solution.
I have read couples of forum mentioned you need to start both Portal and ECC.
For you information my Portal and Java are both on diffrrent Box.
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=olameccpdvr GROUP=PUBLIC R3NAME=DVR MSSERV=sapmsDVR PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR service 'sapmsDVR' unknown TIME Thu Feb 24 12:19:54 201 RELEASE 701 COMPONENT NI (network interface) VERSION 38 RC -3 MODULE nixxhsl.cpp LINE 776 DETAIL NiHsLGetServNo: service name cached as unknown COUNTER 5

Is your backend system configured correctly in your SLD ?
Go to transaction SMMS on your backend system that your are connecting to. Click on Goto=>Parameters=>Display. Look for "server port" value.
This should give you the TCP/IP port for your message server. It could be 3600 or 3601 (36NN - where NN is the instance number).
In your services file, if you made the entry at the end of the file, press Enter (Return) after your entry.
Try restarting your server after making the above changes.
- Shanti

Error while Initial load

Hi Forum,
Iam doing Middleware setup for downloading customer master from R/3 to CRM.Iam trying to do initial load of customizing objects viz.,DNL_CUST_ACGRPB,DNL_CUST_ADDR,
DNL_CUST_KTOKD,DNL_CUST_TVKN,DNL_CUST_TVLS,DNL_CUST_TVPV... which are to be loaded before doing initial load of CUSTOMER_MAIN.
while doing initial load of customizing objects iam getting the below mentioned error
001 No generation performed. Call transaction GN_START.
002 Due to system errors the Load is prohibited (check transaction MW_CHECK)!
-when I do GN_START
"A job is already scheduled periodically.
Clicking on 'Continue' will create another job
that starts immediately.
Do you want to continue?" message is displayed
and I have sheduled it.
But in SMWP transaction I can see in
BDoc Types: Generation of other runtime objects
Not generated / generated with errors 2 entries
 31.08.2006 05:33:50
and the objects with errors are
POT_LISTWRITE
SPE_DDIC_WRITE
-In transaction MW_CHECK, system displays message as No generation performed. Call transaction GN_START.
when I regenerate these objects(generated with errors)from the context menu I find no difference.
I have also referred to the Note :637836 and 661067 which also suggests to run few reports and GN_START but inspite of doing all the corretion parameters in the note Iam still unable to come out of the situation.
Please Guide
Thanks in Advance
Shridhar.
Message was edited by: Shridhar Deshpande

Hi Rahul,
Thanks for the reply.I checked in transaction MW_CHECK and the system throws the message as
No generation performed. Call transaction GN_START.
In the long text the below message is available
No generation performed. Call transaction GN_START.
Message no. SMW_GEN_KERNEL005
Diagnosis
An upgrade was performed.
System response
The Middleware is stopped because MW objects must be generated.
Procedure
Excecute transaction GN_START.
If GN_START is executed,I dont find any change.
I also checked in smq2in CRM and I found the status of the queue as below
 CL Queue Name Entries Status Date
200 CSABUPA0000000042 5 SYSFAIL 31.08.2006 09:54:05 31.08.2006 09:54:11
Thanks
Shridhar
Message was edited by: Shridhar Deshpande

Error while init load of ODS

Similar Messages

Maybe you are looking for